This was the week I decided to take a look at my trichomes with about 2-3 weeks left why not see what’s in store for me. And what I saw was some pretty milky stuff with surprisingly some amber to me that just means I’m going to get some good thc levels I’m shooting for at least 22-25% thc wish me luck we are almost there final stretch

Major changes here at Night Owl summer camp. Have had a rodent problem! Something has figured out a way to get into the dormitory (greenhouse)and had a feast on my plants. Five branches off the Harvey Wallbanger, and two each off the Vanilla Fizz and the 91Grapes. Oh my gosh! I needed to do something else. My wife gave me a spare bedroom for a grow nursery! What a girl I have! So spent the day yesterday moving tents and hanging lights and got the girls all situated in the new dormitory away from some vampire in the night. Will give an individual plant update shortly.

I should be just one more week of flush let me kno what’s y’all take on these two girl I know they are towards the end I don’t have much time left even I wanted to do them longer plus anyways I have some things on veg that I need to get started flowering so this has become like a full time job I’m not complaining tho 😊

Exceso de nutrientes

Transplant week! Some of the girls in the tent started to droop but this one didn’t! She’s looking pretty good to me Come hang out with us in the discord!

she is becoming purple. the temperature low in my city .. it smells very good and strong... thanks ripper seed.......

💫The week went great. After the first stress, growth seemed to slow down, but it worked out, the plant began to expand. I water it every 3 days. I continue to bend the stem along the axis of the pot. I bend the branch that will pass through the fastest. 💚I started giving supplements late. Only on the 33rd day I gave him fish and everything else. 🍀 Week showed good growth, but it could have been better, let's see what happens with the additives. I continue to twist the stem in a circle (I don't know where to twist it). And I also cut off the leaves a little bit, about once a week, as they block the light (a friend says not to overdo it with defoliation, let's see what happens).🍀

Late upload photo taken on May 22, 2018. Plants are slow growing because of high temp. Added new fan for better airflow.

-Seeds were germinated directly in soil 2cm deep with 60ml of pH'd mineral water and covered with cling wrap for humidity. -Lights cycle: 18/6 - Seeds popped after 3-4 days, 100% germination -Cling wrap removed after germination -Day 1 of grow is 8/10/2020 -Day 1-4 seedlings were feed pH'd mineral water -Seedlings received their first nutrient feeding on day 5 -Nutrient water pH'd at 6.3 and oxygenated with air pump + air stone -Mycoroot was fed via top dressing Struggled to get the pH with in range, I had to mess around with pH up and down to get it in the range of 6.3. The growth looks good so far just a bit worried up about the colour of the leaves. Temp varied from 26C-28C and humidity ranged between 42-52%. I had to play around with the oscillating fan speeds and positioning as well as the amount of air inlet vents. I found that just having one opened helped get the humidity up and the temp had only a slight increase. I let the oscillating fan run on its lowest setting and put off its rotating function, I also made sure the fan was not directly hitting the plants which assisted with the humidity micro-climate. The distance of the HPS was at 90cm from top of plants after the popped out of the soil, this was readjusted to 60cm once true leaves were showing. They got the first nutrient feed on day 5.

Week 11 (26-8 to 1-9) 26-8 Temps: 20.5 to 26.1 degrees Humidity: 50% to 56% 27-8 Temps: 20.7 to 27.3 degrees Humidity: 50% to 56% Watering: Both 1500 ml. (Only Calcium) EC: 0.4 PH: 5.6 Dry Weight: Both 2.7 kg. 28-8 Temps: 21.5 to 28 degrees Humidity: 51% to 56% 29-8 Temps: 23.3 to 27.4 degrees Humidity: 55% to 62% 30-8 Temps: 19.9 to 27.7 degrees Humidity: 50% to 60% 31-8 Temps: 20.2 to 26.6 degrees Humidity: 50% to 55% 1-9 Temps: 21.1 to 29.1 degrees Humidity: 49% to 55% Watering: Both 1000 ml. EC: 1.4 PH: 5.6 Dry Weight: Both 2.4 kg. Recalibrated my PH pen and it was only 0.1 off, so i dont think the leaf problems are PH related.

Perfect tropical-like weather. No problems to report. Excellent growth. Still rearranging net tent as this bastard stretch a lot. Stigmas are finally forming. This strain surprises me more every day, she's the first to bloom when she should be the last, she should be unsuitable for outdoor cultivation and instead she's a great performing one. Excellent pheno. 😉👊

SuperSativaSeedClub PurplePunchOG Auto Week8 Weekly update on these three ladies. Been an eventful week for them. I decided to transplant from the original 1gal fabric pot to a 3gal fabric which I never do on autos but I was fighting keeping them happy in the smaller pots. So will see how they take it. Plus I lollipoped the bigger one taking off the lower nodes. All in all Happy Growing.

Excellente souche de Green Barato les colas sont de plus en plus gros et givré, elle a une odeur très remarquable d'agrumes frais.

Todo bien, entrando de lleno en la segunda semana. Hasta el momento solo seguimos con micorrizas del colectivo científico y agua semana por medio

New week starts! I will wright updates every day now. Cos I don't want to keep photos on my mobile devise. I'll make new photo of a new day, load it up and delete immediately. Keep it safe, guys. 🌞13.11.2022 I putted some more substrate to cover my flowers to the leaves. It's only 'training' till now. Also, one of my mini ventilators started to make a creepy noise. I ordered two more cheap mini USB ventilators. I hope they will live longer. That one died after a couple month of work. Sadly... 🌞14.11.2022 Next day morning my ventilator died. I scrued it apart. Then I remembered I have tattoo machine oil in my garage. When I oiled it and turned ON it began to spin like new... Mb I acted stupid buying two new ones, mb not. It's written on the oil tube: 'Oil your tattoo machine every 30 hrs'. So after a few days we'll see. :-) 🌞15.11.2022 The second one plant has a slightly larger second pair of leaves (triple ones). Maybe because it came from her seed one day later. There were a seed peeling problem to both of them and I was forced to help. A difference in germination time was about 8 hrs. 🌞17.11.2022 My ventilator died this evening. Two others I ordered didn't come to me yet. But they should come tomorrow. I don't know will they pass, but it will be better then nothing... 8 hrs difference between growing flowers still noticeable, it's disposed on photos. No feeding for today. 🌞18.11.2022 Today two new air coolers came. They are good quality and power for their's size but too noisy. Not so bad, I say. I installed one of them (it's on photo) and leave the second old one on it's place. It still works and a noise is not so loud. I wunder, why my plants are different by the size. Maybe because one of my old ventilators stopped all the time? 🌞19.11.2022 I watered my girls with 'GHE Pro Roots' and measured drainage today. Input was ph6.0 and outflow - ph6.5. I think we'll be OK in a few weeks. I learned from the grow questions that auto flowers grow better and bigger in pure coco with perlite, but i have mix soil/coco/perlite in my pots. Now I nervous if all will be OK. But my substrate is soft (tapped it with my finger) even when it's watered. We'll see how it'll go compared to others diaries of the same strain.

streching started . they didn't show any sign of stress after going from outdoor to indoor.. from this week streching should be more visible... first pistols showing on F1 versions.

Flowering day 74 since time switch to 12/12 h. Hey guys :-) Finally the time has come . The lady was harvested and hung upside down in the dry tent 😍. Before that, she stood in the drying tent in complete darkness for 2 days and the large leaves were removed. The small leaves stay attached during the drying process so that they protect the buds and allow them to dry more slowly and evenly :-) . In the dry tent, the temperature is 18-19.5 degrees and the humidity is 54-58% 👍. In this environment they are now allowed to hang for 10-14 days before they are fine-tuned and trimmed clean by hand. then after trimming they come to ferment for 6-12 weeks in dark jars with bobeda packs 62% to keep the perfect humidity. After a few weeks, the Boveda packs 58% are used so that they can slowly dry out :-) . Of course there is one last update after trimming. Until then, I wish you a lot of fun with the update. Stay healthy and let it grow 💚🙏🏻. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : https://www.exoticseed.eu/de/hanfsamen/hippie-therapy-cbd Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.5 MadeInGermany

Esta semana volvió a tener todas las hojas sanas. Le complete de tierra las macetas y les hice supercropping para controlar la altura porque no se cuando van a florar

Beginning of week... She is doing her thing.. Slowly but surely lol.. Healthy as far as I can tell.. Maybe the reused coco is too reused? Idk. There is a bit of coco/perlite from my first grow in there lol.. Some others too.. But she is still truckin along.. Went up on the Armor Si (Silica) and a little on the FloraGro.. She does look like she is gonna beginning flowering very soon tho.. Pistils are forming slowly.. Much like the rest of this grow.. But she is starting.. I'm not going to start counting flower till I actually see that she is flowering.. Stretching and all.. That's how I like to count flower.. Always seems to line up perfectly when you count flower that way.. Even with photoperiods.. Not from the 12/12 flip because there is still 2 weeks of transition. Anyways.. Another week in the making... Next day... So my Mars Hydro is crapping out. I have to drop it down to 20 inches from the canopy and run it at 75%.. So pissed.. It glows when it is powered off and still plugged in.. And if I turn it on while the power is set to 100%.. It just blinks until I turn it down to 75%.. I can have it set to 75% and it will turn on like normal.. But I need to use 100% power.. And Mars Hydro sucks with responding to emails apparently.. I'm gonna have to buy a new one and return this POS.. Then hopefully buy a new stronger light for my 2x2.. I am so pissed.. Mars Hydro sucks.. The build is amazing.. The components are awesome when they are not flawed.. But damn this is the 3rd light to crap out on me in 2 years.. I do nothing but run them 18/6 or 12/12.. Run 1 fan on top at the driver and heatsink and 1 under toward the diodes.. Nothing different.. I think I'm gonna buy the Wakyme J-2000.. It comes with 2 fans blowing on the heatsink.. Honestly, noise is not an issue to me.. Heat is.. I sleep with all my fans running already lol.. Its actually hard to sleep without them now hahah.. But yeah. It has a Meanwell driver.. Samsung diodes.. Dimmer.. And the fans.. I think it's my best bet at this point.. Fuck Mars Hydro.. They had 3 chances with me.. My Sunraise 1000 (blurple) is like 4 years old and still running strong.. Smh.. Mars Hydro is crap. How did they even get so popular??? I'm sure more people will realize how crappy they really are.. No name brand everything.. Runs hot as ass.. Craps out after 3 - 4 months.. So so pissed... Almost mid week.. I went ahead and pulled a couple branches down a bit.. The canopy is perfectly even.. It looks AwEsOmE! Lol Mid week.. Well, she seems to be doing a bit better than before, I'd say. Normally, my previous autos would be flowering and probably almost finished stretching by now.. Live and learn.. I hope all the Zkittlez Autoflower seeds aren't like this.. And hopefully this strain turns out pretty dank to be wasting a few extra weeks on growth but not getting much growth at the same time.. And I hope harvest doesn't come quicker than the swelling of the calyxes.. But shit happens.. I have Mars Hydro sending me a new driver/dimmer. I sure hope it's just "plug-in" because if I'm going to take this light apart, I'm just going to go with the Meanwell HLG-240H-54B.. From what I was told from LEDSupplier dot com.. The 240W would be better due to the different current. We are still trying to figure out if the dimmer is 0-10V to see if I can just keep using the Mars Hydro dimmer along with the MeanWell HLG-240H-54B.. That would be cool.. Sorry but Mars Hydro sucks.. I bet running a different driver would help alot of issues.. Maybe even run cooler. Anyways.. About the plant lol.. She is doing great.. The stiples are still showing some weird colors on the tips.. Doesn't seem like an issue.. Some plants have the stems change colors.. Some have pistils change colors.. Some have leaves change colors.. Maybe that is just in her genetics.. The pics that ILGM shows, it should be a pretty colorful strain.. Guess we shall see! But she is happy and healthy.. I think I'm going to stop using Hydroguard next week.. Just doesn't seem like it's doing much of anything.. I really only bought it to fight root rot when I attempt DWC which I am going to attempt again very soon.. Maybe after this grow... We shall see... Almost end of week.. Went ahead and defoliated/lollipopped a bit. She was getting too bunched together.. She is nice and opened up now.. 2 side branches stayed pretty short.. Not sure what that is all about.. Flowers are slowly forming at this point. Next week will be week 1 of flower and stretching should begin! She is still getting good light even with the power only being at 75%.. Just have it down lower.. Which I could get away with till harvest.. But fuck that. I ordered a new Mars Hydro TS 1000.. And Mars Hydro is also sending me a new driver/dimmer box to replace the old one.. Going to return the light and I still want to replace the stock driver with the MeanWell.. Trying to get more professional opinions before I attempt that tho.. So far, I am hearing to get the HLG-240H-54B.. The 150H (150W) doesnt have the correct current so I'd have to go with the 240H (240W) due to the output current and voltage to match correctly. Can't wait to try it out! End of week.. So I got a new Mars Hydro TS 1000 in.. It comes with a Moso driver instead of the old Juson driver.. Hmm.. Ok.. Seems to not heat up as much.. The diodes still get hot, but the lack of the driver heat should help keep things cool.. Nice... I am able to raise the light back up and run her at 100% power.. I went ahead and tied the branches down a little more.. There are 2 that are still staying a little short.. But I think it's the way I started the whole LST process.. I should have tied down a different 90° angle instead of the angle I used.. But live and learn.. Wont use that way again lol.. Other than that, the flowers are forming nicely.. Happy happy happy.. Next week will begin flower! Niceeee.. On to the next!!!...