Last week of Ozz! I’m getting some nice trichromes. Surprisingly, she doesn’t smell much, but she’s still beautiful. She also has the best ratio of buds to leaves out of the three plants of the same strain. I’ll start trimming Dorel by Friday and #4 this weekend to free some space. Then it’ll be Ozz’s turn on Sunday or Monday. The relative humidity levels are getting dangerously high, but the temperatures are still fine until next week. Since she’s covered, I have good hopes she’ll hold. No additional bud has rotted since two weeks ago :)) Just finished trimming Dorel and will do #4 tomorrow. Fan leaves were super frosty so I kept them to cook, ended with 17g of trim (only fan leaves and too small buds) as well as 37g of dry buds. Not much but it was the smallest plant of the 3 by far, I wasn’t expecting more. First taste test was really conclusive, looking forward to testing again after some curing! Edit before I complete the harvest section, all 3 plants cut and just Ozz remaining to dry and trim. Terrible outcome for #4 as I had to throw more than half of the plant away due to bud rots. I’m still really confused about what happened: the day before harvest I noticed and removed 3 bud rots from the plant - so far so good. All remaining buds were fine, but when trimming I realised every single top was maroon-ish at the base and I could clearly see a start of mold when opening some of them. Although I could clearly confirm what it was with a 30x lens, the white spots were extremely scarce and small (less than 1x1mm each time). It doesn’t seem really coherent with how it should have spread. Nonetheless, I didn’t take risk and threw away any bud where I could identify white mold with the lens, and put aside the ones where I had a doubt in pop corns (the “7g maybe”, cf below) to track the evolution. A quick summary of the harvest so far: - Dorel: 250g wet, 37g dry / 17g trim (54g total) - #4: 450g wet, 33g dry / 7g maybe / 29g trim (62-69g total) + a lot thrown away - Ozz: only weighted the two bigger canopie I cut, 162g+142g≈300g wet. It represents around half of the whole plant (probably less, but stem included), so around 5-600g wet total. Still have a few days before I start trimming, but considering the hassle I might start early to not be overwhelmed.

Day 57 26/08/24 Monday Feed today using de-chlorinated tap water pH 6. No plagron products as noticed burning again. (I think I'll do a run using advanced. And Plagron. Just to see what's different. ) Showing great progress!! I did a little defoliation of lower two fans that started to turn in colour. Apart from that left them to it ✌️💚 Day 59 28/08/24 Wednesday De-chlorinated tap water pH 6 only today, 400ml with little to no run off. Day. 61 30/08/24 Friday Another feed today using de-chlorinated tap water pH 6 with Plagron products. Picture and videos coming tonight 🤯👀✌️💚 Day 63 01/09/24 Sunday (End of week) De-chlorinated tap water pH 6 today with calmag.

Leaves are looking chunky on this one Top or not to top ? Day 17 Note Watered with plane tap water And finally Top her feel she is going to be a beast Day 21 Notes Repotted into a larger pot

The week was great. The roots took to the 1/4 nutes and I’m expecting beast mode soon. Stems are ok, stalks are good until you’ve gotten trunks. This ebb and flow NFT system is the way to go for me. I red something a while back about “kiss” keep it stupid simple. This setup does that and triples anything in souls I’ve ever done. My only new issue is that my humidity is quite a bit higher so I see myself investing in dehumidifiers down the road.

PBB's coming to an end

Only the final straight now will start flushing within the next week. Really not a lot to say at this point other than roll on harvest time!

Hi everyone i just put the seed in today . I'm running it with Coco perlite and xpert nutrients will do updates in the week to keep you informed. Thank you for looking at the diary and a remember it's 420 somewhere 🌱

Week 24 October 10 - Daylight 11h : 8h20 / 19h20 Temperatures 14° C to 23/24°C - globally rainy weather during the end of September and beginning October. Rare sunny moment but cool temperatures: best conditions to develop mold or diseases. Even if the plants are in a protected from rain and ventilated area. It’s why I harvested 2 plants ( Break Pad Breath + Flash Back #2 ) before losing the yield destruct by botrytis. Royal Moby and GMO x Zombie Kush are still flowering. RM: interesting sativa flowering, productive and resilient. Lot of resinous flowers; maybe it will be some seeds inside appearing after an autopollination. No mold for the moment. Impressive refreshing Lemon smell. Ready in 10 days max. GMO x ZK: ending the flowering cycle in a good way: pretty dense flowers, covered by resin. Spicy and flowery aroma. I had to cut a little bud attack by botrytis. Ready soon. Last weeks just add pk13/14 + Bud XL and overdrive + enzymes Start flushing now.

The purple lemonade auto is growing better its looking good the gorilla glue auto isnt showing any sign of preflower yet im starting to think it may be a photoperiod plant .The gorilla glue auto still isn't showing any sign of preflower yet i dont know what to do i don't want to go to a 12/12 because i dont want to stuff up my purple auto thats in flower

Everything is going as planned, some phenos of the nana glue are putting on trichomes! Plants are starting to slow down on the stretch. I’ll lollipop and defoliate this tent in a few days and get ready for the flower to bulk up . Also going to feed them in the upcoming week to make sure they have all the food they need to fatten up in mid to late flower

Purtroppo la auto elephant mi ha abbandonato.. Peccato! Metterò subito un altro seme a germogliare anche se già sono passate 2 settimane e mezzo, non fa niente, sono fiducioso!

La pandemia kush es la más avanzada y se le empezará a regar solo con agua al igual q la Trimosa x mimosa_1 La Trimosa x mimosa tiene un problema con absorción de agua, pero ya está siendo solucionado

2025-07-14 What should i say, aim kinda speechless. she stopped stretching but is still growing wider, buds swelling- iam sure she will need at least 4 more weeks.- shes huge and needs time to maturate. she started smelling the typical Mimosa scent. she got a topdressing with silicium flash- soon she will get some BIo PK 5/8 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Mimosa Auto is a contemporary autoflower strain boasting potency and bud quality that rival photoperiod cannabis strains, with a staggering 21% THC content that delivers a remarkably strong high sure to bring a big smile to your face. Mimosa Auto is versatile, making it an excellent choice for various daytime activities. As for its flavor profile, as you might expect, it offers delightful citrus notes, featuring hints of orange, lime, and lemon, with a subtle touch of diesel. It's a flavor profile that's sure to satisfy even the most discerning cannabis connoisseurs! In indoor cultivation, Mimosa Auto reaches a manageable height of 60–150cm, while outdoor plants typically reach 80–160cm, making it suitable for tight spaces. Mimosa Auto doesn't keep you waiting: it yields its delectable harvest in just 10 weeks from germination, including 7–8 weeks of flowering. Indoors, you can expect up to 400g/m², and outdoors, it delivers up to 130g per plant. xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Growing Environment Setup & Specifications Lighting System Model: Sanlight EVO 5-150 Quantity: Up to 5 units Power Output: 320W per unit Maximum Total Output: 1600W Environmental Control Management Unit: Growcontrol Growbase Pro Humidity Management: Dedicated Humidifier Dedicated Dehumidifier Temperature Control: Primary: System-controlled Secondary: Additional Radiator for supplemental heating Air Management Air Circulation: 2x Stand Fans Air Extraction: Exhaust Fan with Filter System Irrigation System Primary: Autopot XXL Pot System Water Storage: Flexi Tank Root Zone Aeration: Airdomes Dedicated Air Pump Growing Medium Type: TERRA PRETA MJ-Mix Nutrients System: BIOTABS Method: "Just Add Water" Strategy Type: Organic-based feeding

como crece, ya le hice su ultimo lst para que la penetracion de luz sea la mejor y florezca de la mejor forma. se esta regando con te de cascaras de platano, CalMg y tambien fertilizante PK en cada riego para ayudar en esta etapa de floracion

She’s growing well and finally starting to grow out of her lil leaf mutation at the beginning.

I feel like the overall cycle length of this is a lot longer than stated. They have been growing for nearly 15 weeks. I believe they could have done with an extra week but we needed the space to add other clones that were ready.

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the Update 😃. Flowering day 28 since the time change to 12/12 h. Hi everyone :-) . Today she got another 1 g GHSC Bio Bloom per l coco 👍. It is developing really well and is starting to smell very sweet :-) Everything was cleaned and refilled 👍. Have fun and stay healthy. You can buy this Strain at : https://www.exoticseed.eu/ Type: Quick Sherbet ☝️🏼 Genetics: 75% Indica / 25% Sativa Sunset Sherbet X Black Lemon 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8

She’s slowed down on her stretch and started to produce flowers! She very sturdy and has very thick stems and sun branches. I’m intrigued to how she’s going to yield as she’s so huge and full of vigor as she was nearly a couple of weeks behind when I started her and look at her she’s a beast! Next I switch over to over drive for 2 weeks then initiate flush! So close but yet so far ya know 😉