Missed a week as been busy but here they are coming into week 10 time to start hitting them with some overdrive for a few weeks before flushing with ph,d water

Welcome Back!💚 Nach der siebten Woche des Wachstums entwickelt sich die Snapple Apple weiterhin nur spärlich. Es war Zeit sie jetzt dennoch in die Blüte zu schicken. (07.02.26) An sich wirkt die Pflanze jetzt schon vitaler, dennoch war jetzt kein großer Höhenwachstum zu beobachten. Ich bin nun gespannt, wie sich die Pflanze in der Blütezeit verhält. Diese Woche habe ich das letzte Mal den Orgatrex Dünger beigegeben. Mal schauen, ob da noch was an Wachstum passiert🙈 Die Umgebungsgegebenheiten sind OK: ————— 🌞 Temp: 21°C 🌚 Temp: 18°C bis 19°C 💨 RH: 54% VPD: 0,85 kPa ————— Viele Grüße 👋

Week 16 (30-9 to 6-10) 30-9 Temps: 18.8 to 24.6 degrees Humidity: 54% to 69% Watering: Both 500 ml. Dry Weight #1: 3.1 kg. #2: 3.3 kg. 1-10 Temps: 19.9 to 24.3 degrees Humidity: 59% to 71% Watering: Both 500 ml. Dry Weight #1: 3.3 kg. #2: 3.5 kg. 2-10 Temps: 19.2 to 23.8 degrees Humidity: 60% to 72% Watering #1: 1000 ml. #2: 800 ml. Dry Weight #1: 3.5 kg. #2: 3.7 kg. 3-10 Temps: 18.2 to 23.3 degrees Humidity: 57% to 65% 4-10 Temps: 18.5 to 24.2 degrees Humidity: 54% to 66% Watering: Both 500 ml. Increased the light's intensity from 60% to 65% Dry Weight: Both 3.6 kg. 5-10 Temps: 18.2 to 24.1 degrees Humidity: 55% to 69% Watering: Both 500 ml. 6-10 Temps: 18.4 to 24 degrees Humidity: 53% to 65% Watering #1: 700 ml. #2: 500 ml. Dry Weight #1: 3.7 kg. #2: 3.9 kg.

English The first video was taken 2 days after the lollipopping/defoliation day, the rest on the last day of week 6. Towards the end of week 6, the ladies showed a few symptoms of light stress, which is why I increased the distance to the lamp to 45 cm and since then things have been running optimally again. However, I think I will continue to veg for another 1-2 weeks and only then switch to 12/12. Deutsch Das erste Video, wurde 2 Tage nach dem Lollipopping/Defoliation Tag aufgenommen, der Rest am letzten Tag von Woche 6. Gegen Ende der Woche 6 hatten die Ladys ein paar Symptome von Lichtstress gezeigt, weswegen ich den Abstand zur Lampe nun auf 45 cm erhöht habe und seitdem läufts auch wieder optimal. Ich denke, ich werde jedoch noch 1–2 Wochen weiter Vegen und erst dann auf 12/12 wechseln.

Flores de Marte :^)

D24 - 10/02/2025 Last week was really good, none of the girls showed any signs of toxicity after the full strength feed, which is good. I’m already seeing signs of pre-flowering on some of the girls, next week for sure we enter flower mode. Applied some LST to the girls and some defoliation. Fan leaves were taking a lot of space, now internal nodes should have more light to use. Not going too crazy on this though. Unfortunately snapped a branch of Northern Lights #1 while applying the LST, must take extra care next time. Still haven’t changed the reservoir, should do that later this week. — D27 - 13/02/2025 Changed the reservoir and mixed nutrients for pre-flower. I’ve been adjusting the LST, but other than that there’s not much of an update. Girls are looking really great and growth is exploding. PPFD is around ~500 on canopy level. — D28 - 14/02/2025 Did another defoliation session. Went a bit more heavy this time. Now we let them recover for a few days.

So I am halfway through my first harvest and I'm starting to feel like I may have been impatient! Would appreciate any advice or constructive criticism from any experienced growers out there! Do you think I harvest the rest of my plant now or leave it a while? Any tips/hints on the best way to maximize bud density? Thanks in advance

Super nice strain super nice colors with a strong grape Gary Payton Gas smell during flower Nice looking rock hard buds with a Great Taste and effect all at all im very happy with the outcomings

Was an amazing experience overall. The girls all did great. No complaints. Training went well. Topped twice and lollipopped the lower growth. All the buds, even the lower growth, are large. So frosty too. Amazing overall and will have to grow again as long as I like the smoke.

Week 5: This week was all about battling bugs, adjusting fans endlessly, making bug traps, blood and sweat, and of course the dreaded humidity. I found a few mosquitos and Aphids munching on my girl. Unfortunately mosquitos are a “resident” of the area I live too so had to set a few bug traps. Also ordered some cool equipment and organic insecticide to get her feeling right as rain again, really looking forward to our next week. Topped her and have already starting doing some LST to spread the branches and get more light onto new growth, from which is doing very well. Scary experience as I was afraid of hurting her, tore a leaf here or there but no harm done. Once again the great genetics from Humboldt seed organization and Quality Just Cannabis soil kept her stable and she pulled through! Sipping more water this week a little more than 5L water. Still battling humidity with the fluctuating weather but that should be sorted in the next few days... until next week ✌️

En general me encanto cultivar esta genética, siempre fue la primer genética que quise cultivar desde que empecé en esto y no me decepciono en lo absoluto, de una sola semilla obtuve 106 gramos de flores de gran calidad 😃 increíble para ser mi primer cosecha con semillas de bancos, ya quiero ver que resulta en la próxima cosecha ya con más experiencia y mejor equipo 🤩

~Entry for the 'Best Rarest & Smallest Pot by Seedsman' contest~ Starring 🤩.... ~ Seedsman Zkittlez Auto ~ Zkittlez (Grape x Grape Apple) Auto x Auto Fruit (Auto Fruit Cheese x Auto Blueberry) Zkittlez Auto is one of the very sweetest-tasting auto strains available anywhere. It is a sativa-dominant (60%) strain that was bred from Zkittlez (Grape x Grape Apple) Auto crossed with a male Fruit Kush Auto, the latter a remarkable fruity strain bred from Fruit Cheese Auto and Blueberry Auto. Growers can expect to harvest some good yields of high-THC buds. Zkittlez Auto remains a fairly short plant, rarely exceeding 120 cm. in height wherever it is grown. This is a vigorous plant which is able to metabolize a high level of nutrients and she's a thirsty girl too! If growing indoors close to neighbors it is strongly advised to ensure good and effective carbon air-filtration in order to neutralize powerful odors. This strain's life-cycle is approximately 90 days from seed to harvest. The leaves on this plant are big and wide serving to convert every lumen available into Zkittlez goodness. Indoor growers should obtain between 400 - 500 gr/m2 while plants cultivated outdoors will produce slightly more at 500 - 600 gr/m2. Lateral branching is very good and it is recommended to use supports/ties to prevent snapping and keep buds close to the light source. This strain's scent is sweet and fruity with candy and berry notes. Its high-THC has been measured at between 21 - 24% with less than 1% CBD. The effect is well-balanced, cerebral and euphoric, and is very good for social situations as well as for relaxing in front of the TV either alone or with company. It also has the added effect of helping to relieve chronic pain, helping with nausea, insomnia and depression as well as stimulating the appetite.** **Credit to Seedsman.com ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ~ The Setup ~ ~ Grown in a 2qt plastic popcorn pot filled with Mother Earth Grow 70/30 Coco/Perlite with Xtreme Gardening Mykos added. ~ Seed was germinated directly in the medium without any 'pre-soak' ~ Feeding will be by Dutch Pro Nutrients ~ 24hr light cycle while germinating ~ 20/4 light cycle after first leaves appear. ~ 4x8 Gorilla Tent ~ HLG 650R w/ 30w Supplemental UVA Bar controlled by a Trolmaster Hydro X controller set for a 15min Sunrise/Sunset simulation. (also a HLG Blackbird for additional side lighting if necessary) ~ Supplemental co2 controlled by an AutoPilot APC 8200 co2 controller ~ AC Infinity Cloudline T6 with Controller 67 using a Terrabloom 6x24" carbon filter ~ De-Humidifier and Humidifier when needed. ~ 14k BTU IdealAir portable A/C unit plumbed into tent for temperature control. ~ BlueLab testing instruments ~ Two Hurricane 18" oscillating fans ~ Two 6" Clip-on fans ~ Two 10" floor mounted fans ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Weekly Update: 11/8- Well here we go into the first week of Veg for the Zkittlez Auto from Seedsman Seeds! I have her nestled in between a bunch of other autoflowers that are one month old now so she's got lots of company! Since sprouting the Zkittlez has bee doing exceptional, with good color and vigor. I was a little concerned about her when she first sprouted as her first leaf set had a funky color to them and I feared that she wouldn't survive. But low and behold, when she opened up her leaves they turned a beautiful green and she's been looking healthy ever since! Today I gave her her first water/feed with 20oz of well water with a base ppm of 100, to which was added the following Dutch Pro nutrients: Grow 'A' & 'B' @ 10ml/g, Multi Total @ 7.6 ml/g, Take Root @ 3.8 ml/g, Silica Von Liebig’s Special @ 1.2 ml/g along with Earth Juice's Oily Can @ 5 ml/g. After adding the nutrients I ph'd the solution to 6.1 @ 74℉ 11/10- The Zkittlez is doing really well in her little Popcorn Bucket! I didn't water her today, but will wait until tomorrow to avoid over watering her. 11/12- Yesterday I went ahead and watered/fed the Zkittlez with 20oz of well water with a base ppm of 100, to which was added the following Dutch Pro nutrients: Grow 'A' & 'B' @ 10ml/g, Multi Total @ 7.6 ml/g, Take Root @ 3.8 ml/g, Silica Von Liebig’s Special @ 1.2 ml/g along with Earth Juice's Oily Can @ 5 ml/g. After adding the nutrients I ph'd the solution to 6.0 @ 75℉. The Zkittlez Auto is doing great, has good color, vigor and already has her third leaf set emerging! 11/14- Today when I checked her pot the Zkittlez auto was still pretty moist so I'll be waiting until tomorrow to water/feed her. The Zkittlez Auto is doing fantastic without any visible health issues, has good color and now has her third leaf set almost fully emerged! Well it's been a fun week watching this little girl grow and the coming weeks promise to be more exciting as they pass and she gets her groove on! See you next week! 😎❤️ ~ Thank you from the bottom of my heart for following my grows and for all the ❤️and support you give! 💚What you grow - Grow what you💚

Day 43 this orange is running absolutely faster than the last I did. Every day flowers are getting bigggers and resin is awful to be at 42 days. I’m really loving aptus product, but I really can’t ell what’s is pushing her so fast. Behind, in the video, you can see another auto is a strawberry banana and germinated with just 24 h difference but is starting just now to get into flowering, same soil ‘, same feeding.. incredible Let’s see what s happen

This girl was a fast finisher harvested on day 46 of flower, nearly 7 full weeks.

for week 11 i will have better image's and videos as up grading to a better camera. day 2 of week 10;frosty some sites already this early in flower form both the gorilla glues and for the grandmommy purple is still stretching with pre flower sites and hairs but no solid foundational bud sites like the gorilla glues have

Flushing days-4

End of week 3. Looking good. She is covered in bud sites. Some decent development so far. She hasn't stretched as much as I'd have liked but her colas look to start pretty low. Time well tell how much she will produce. Can't wait to watch her bulk up!

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball.