They’re still doing their thing so it’s chill time, until I have to chop em because the place I’m renting will be on the market and shown starting Monday. I already have 1 plant in a drying tent on day 4. So it’s candles and candles and hope for more amber by Sunday. HARVESTED!!!!! harvested the remaining two plants on 3/6/21 ill update when I have the answers 3/13/21 Still curing, still hanging, and today I just had to sample a tier 2 bud. Everything seems to be on point.

She grew well this week. Another 11cm. Day 42 - I trimmed off about 6 large fan leaves to give lower bud sites some light. This is her last week of 20/4 veg.

Drunken Bitch Slap has been growing great. She got her roots pruned today, along with 1st node removed, and topped under 4th node. She is growing great under the Hortibloom solux 350. Nothing else new to report. Thank you Hortibloom, and Aeque Genetics. Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

Привет друзья. Моей растихе сегодня 48 дней. Начал применять LST технику на 19 дне и продалжаю применять её через день, а 18 августа добавил ДЕФОЛИЗАЦИЮ С 20.08 ДЕФОЛИЗАЦИЮ делаю каждые 3,4 дня С 20.08 LST технику делаю каждые 4.6 дней На сегодняшний день влажность 50% Три дня назад заметил высокий Ph 7.9 С сегодняшнего дня Ph 5.8 Заказал погладитель влажности, отпишусь в следующем репорте. Не смотря на высокую влажность и высокий Ph, растение растёт хорошо, генетика радует. Всем мира и добра! https://t.me/smail_seeds #Smail_Seeds

Day 119. After 72 hours of darkness - chop day !!! P.S. if you are searching for Killer Kush, she got separate diary, my favourite of all 3 strains. Day unknown !!! Though I uploaded dry weight results and videos, but made it only with Cheeses, all footage is deleted now , so this part will be missing, stoners life ... ;))) Happy Growing !!!

Hey guys, The things I did in this week. Shamans: - 6th week of flowering - PH 6.3-6.4 - EC 1.7 As you can see I did a mayor defoliation on the Shamans, this was necessary because this week and in the comming weeks there was/will be many rainy days. Therefore the risk of bud rot increases when having alot of leaves and not a propher airflow. I switched spots between the two shamans and turned them 180 degrees so I won't get undeveloped buds on the other sides of the plants. Done this many times before but forgot to mention. Lollipopped them and got rid of some weaker branches. Critical Kushes: - 2th week of flowering - PH 6.3-6.4 - EC 1.3-1.5 - Lollipopping - Minor defoliation All the plants had been sprayed with Canna Cure.

Hey folks, I'm finally back at it again. It took me a while for a couple of reasons: 1) I usually only grow in the winter. 2) I completely revamped my grow room after the issues I ran into with the last setup. 3) It took me a while to brainstorm exactly what I wanted to do. I bought these seeds from D.C. Seeds and was very pleased with the experience. I'm very happy to give business to a fellow American and Veteran. I've only ever purchased seeds from the UK in the past and that experience has been "dodgy" to say the least (not the vendors fault, but the transit). I've only ever grown photo's, but chose to go with all auto's moving forward. After calculating the intensity of my current light, with it being on a 20/4 rotation I'm very close to hitting 40 moles per day, at least directly under the light. It doesn't quite cover my 2' x 5' trellis. I'll eventually upgrade my light, but auto's should get me the best bang for my buck with this light. Also, I spent a pretty penny building this new grow room. The other obvious reason for growing auto's is their shorter seed to harvest time. I've got a small grow area, and never plan on expanding. Theoretically, auto's will allow me to produce the most out of my room. A few things about my grow room: 1) I lined the whole closet with 1/2" plywood and put that piece of ply the air intake/outtake/power as the divider between each side of the closet 2) The grow room itself has ply on all wall surfaces so I could mount stuff to it and paint it 3) The other side of the closet is my storage/prep/power distribution/etc. area. Maybe I'll take a pic one of these days 4) My last grow my carbon filter/fan was venting into the other side of the closet. This created a headache for a number of reasons. I tapped a 4" hole through the floor and am now venting into my crawl space below the house. 5) I moved to bubbleponics to speed up my grows even more. I will be removing the drip system once the roots hit the water in the res. 6) The larger res. will hopefully make my life much easier. Late in the last grow I could only fit 3 gallons of water in the bucket and that sucker was pounding down at least a gallon a day. That required too much micro-managing for me (both ph and refills). 7) I no longer have a fixed trellis with chicken wire. The trellis is held in place by dowels that I can pull out by hand. The short sides of the trellis have hinges on the bottom, so I can fold it and pull it out easy-mode. Lastly, I'll be using string for the trellis so come harvest all I have to do is cut the string instead of dealing with trying not to destroy buds pulling them through chicken wire (it takes forever). 8) I built a light diffuser on the other side of the air intake 9) My res. is on a motorcycle lift I'm using a drill to move up and down I have now started using Jack's as my primary nutes. They tell you the full break-down of each macro and micro nute, giving me more control and understanding. I think House & Garden is a good product, but when stuff goes bad it's more difficult to troubleshoot when you have no idea what each piece of their full lineup contains. I'm assuming it's kind of a proprietary type thing, which I understand, but knowledge is power. I am still using their Drip Clean (while the bubbler is going) and Roots Excelurator Silver, both excellent products. I'm still using Hydroguard, and will FOREVER. I'm a true believer now of why Hydroguard is necessary for any hydro application, IMO. I also purchased water soluble fulvic acid, but have decided not to use it for this grow....or at least while the bubbler is going (I'll elaborate below). Ok...now that all that is out of the way.... I really wanted to use my well water instead of R/O to make my life easier. Soooo....I filled up my res., and put two seeds in the system immediately. Nothing happened after 1 1/2 weeks. I finally opened up the cubes and saw that the beans had popped, but it looked like maybe I drowned them, or they ddin't grow straight up or something. For round two, I didn't change the water out, and decided to soak the beans for 24 hours in R/O water first. I had the exact same problem. I'm still not really sure what happend, but I suspect it was the well water. My PPMs were sitting at ~500 with the well water, which was probably too spicy for the beans just starting. Also, my well water is questionable (even though it's at 165ppm), but I won't elaborate further....it's a long ass story and I've spent an absurd amount of money on it. Lastly, I did put the Fulvic acid in, and it was very messy. I really want to avoid having to clean my res. Once the roots get big it will be a real pain in the ass to clean. I'm leaning towards not using the Fulvic acid this grow just to see how things go. I had 10 beans total of the Sour Apple and have already ruined 4. So here's hoping third times the charm. So, I went back to my tried and true method: 0) R/O water for everything. Ditching the well water idea. 1) Soak beans in R/O water for 24 hours 2) Paper towel method between plates on a heating mat 3) Once the roots pop, I place them pointed down in the hole of the rockwool cube 4) Hand water once a day by dipping the cube in the pre-mix of 1/4 strength Jack's and everything else I've listed above. This put my PPMs at 300...a way more reasonable value for starts. It's been exactly 7 days since I followed the above. It's probably hard to see but the cotyledons came up, and multiple roots have come out the bottom of the cubes....way faster than I've ever seen since I started growing. That means even though I'm doing my old process this already shaved at least a week off of when I'd normally put it in my bucket in the past.

Despite the deficincies I'm still happy with the result! I used Coco/perlite as medium and found some deficincies in the very beginning and at the. For a next grow I would probably add worm castings and silicium flash for a better start. Place the tabs in a bit later so they last the entire grow. Use orgatrex and bactrex more throughout the grow. Update after drying: End result is 31 grams of small and fluffy buds. Not my best result and most likely caused by the deficincies early on in the grow. Smell and look are all right. Waiting some more for curing before I will taste them.

Let's remember, in week 6 one of my king's tart had been broken in 2 because of the tension due to my bad LST. This plant grows much taller than the others. I'm trying to lower his height by doing HST. Currently she does not seem to complain about it. I preferred to remove my net this week, to more easily access my plants and water them. I hope the branches will hold I cut a lot of leaf this week. I hear different opinions that say it's beneficial others not... At least it will have the advantage of lowering the humidity. --------------------------------------------------------------------------- - Water: tap water at 300 PPM, I add 0.7G of Hybrid powder and 0.3g of booster PK+ per liter to reach 950PPM and I adjust the PH to 5.8. I watered daily until water drained from the pot (to release nutrients from previous waterings) and I take a 3-4 day watering break to let it dry out before resuming a daily watering schedule. -Daytime temperature: 22-26°C -Night temperature: 20-24°C -Humidity: 50-75% ( Too high but it's hard to lower it... I need advice please contact me if you have :) ) -Lamp: Mars Hydro FC3000. intensity 90% at 35cm from the top leaves -Room: Mars Hydro 100x100x180cm -Extractor: Mars hydro 402 CFM Max. power 3/10 -Substrate : 70% coco, 25% perlite, 5% vermiculite. My instagram : https://www.instagram.com/p/CuMhQ_BsjRP/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Looking for MarsHydro equipment for your crop? 🔥 You can use my promo codes! 🙏😻 "houstone3" for: TS LED Grow Light, Tent, Ventilation for 3% off "houstone5" for: FC&FC-E&SP LED Grow Lights; Grow Tent Kits for 5% off https://www.mars-hydro.com/?acc=hou-stone

bonjour je fais ce journal pour voir si j'ai reussi à avoir la main verte . j'ai voulu diversifier mes journaux alors j'espère que je vais réussir. toutes l'aide est la bienvenue pour ce nouveau projet . j'ai planté 2 jeunes pousse de figuier de tabac ramené de Rimini dans un pot au jardin préparer ma terre light mix 50 litres avec 50 grammes startrex et sillicium flash . j'ai creuser un trou soupoudrer de mycotrex 5 grammes pour mettre mes deux plantes . maintenant en place je laisse la nature faire sa route avec elles .

Harvest day! I think it could have been harvested a week earlier, but I preferred to wait. In my opinion, the fertilization plan I used could have been improved; maybe next time, however, the yield was excellent. As soon as the drying phase is complete, I'll post the weight of the dry buds.

10/04/2023 Day 54 I've been adding Ripen in the mix lowering Flora Bloom. Started at 1.4 EC. Added 4 to 5L of water to refill the tank lowering progressively the EC, today 1.2 EC. Will follow the strategy till Thursday, then will empty the tank, and fill back with 12L and only Ripen, for 1 week. Then 3 days with GHE Kleen.

All right here we are guys Midway through week 3 of flower and she should have more production but due to the extreme training and the amount of Bud sites there's a lot of energy being distributed between so many areas that I don't think I'm going to be left with many huge buds but as I mentioned before many thumb size which is fine by me as long as the nugs are tight and smoke as good as I can hope for.. strawberry cough has been one of those elusive strains for me for one I never thought I'd ever even be able to grow cannabis let alone grow the strain that I've been wanting to grow since I was 14 and I'm 38 now going on 39... Long story short this has been a long time coming and so now I'm only a month and a half or so away from it becoming a reality is really awesome... I hope everyone out there is doing good I hope their ladies are doing good and God bless everybody happy growing ✌️😎 https://weedseedsexpress.com/us

Update of week 2

January 1st. HAPPY NEW YEAR!!! New Year , new Challenges 😄 Seedlings were showing up very fast, but Iam taking today as Day 1 Its alot of fun with those cute Vessels And iam really hoping to keep them Happy Thy for Visiting this lil Grow. #420 Worldwide

Hello folks For this second week of flowering the girls are doing well but i have i little prob with the Ph runoff of my 2 remo I water every 4/5 days PH 6.2, without fertilizer this week, because I wanted to make a little "flush" before using fertilizers for flowering Runoff : ph 5.7 / 1060 ppm while I water at Ph 6.2, Ph 5.7 is too acidic for soil and I noticed some deficiency just at the top ( nothing at bottom ) like zinc iron or something, but I will fix that at the next watering 👌 Did a defoliation at the end of the week, mainly so that the light could cross the canopy, even though I usually dont like to remove leaves, I have to try👌 Follow, like and comment if you enjoy it I also have a second diary with 2 Moby Dick Peace Love & Weed 😍👊

We are doing very well, this Indica has developed a lot of internodes, I expect big dense buds of flowers, the structure has become robust, with large and thick palmate leaves, the plant has a bushy structure, has stopped growing in height and is standing. proceeding to grow the flowers in width, I really like the purple that you see a little everywhere, the leaves at the base are starting to die as it should, even the vase has taken a certain weight, the climate is still a lot hot no rain, but at least there's a bit of wind all the time, I feed the plant with 1078 PPM, and 3 L of water a day, overall I am very satisfied with Ayuaska purple is vigorous and vital, a nice Indica. I eliminated some black insects that I discovered to be harmful, luckily I caught them all in a group as soon as they came out of the eggs, it was easy to exterminate them, I also administered the mycorizia to the ground (which I do every 6 weeks) to avoid mold and diseases .💪

Everything is fine. Switched to a more customized approach of nutrition... noticed some yellowing on the fresh leaves but no drama, already getting better. PAR is at 850-900

She grew up nicely very healthy and strong and she produced a decent amount of organic clean cannabis, It's great and just what I work for because I'm a patient that needs to grow his weed and doing it making sure I grow them naturally and organically. The result is a very fruity and and tropical aroma, the purple color makes her even more beautiful. It's just a dream man, I love it, I just love to grow this strain, the 4 plants I grew had the same aroma very tropical and fruity, super sweet.