We'll call this the beginning of week 1, she's up and growing. The MegaCrop should push her growth a little and really get her off on the right foot. Debating topping or LST, not sure how this one's gonna play out, but I'll see how fast she make a vertical move before the final decision is made. Thanks again to Zamnesia and Plagron for the opportunity to grow some dank buds!

TH 1Q2025 - Week 4 - Bolt I 
(ON Haze X Original Haze) X Northern Lights #2 “Todd’s Haze” Objective - 8 Female Plants, Topped ONCE @ Flip, 12” when topped - Modified Sea of Green Seeds Wet: 1139PM, 28.2.2025 Germinated: 2.3.2025 Flip: 21.3.2025 Harvest: 77 Days, DATE: 6.6.2025 _________________________________________ 
Weeks Summary: - Photos indicate we’ve been overdriving our plants. Lime - Yellow Green, Stressed lowers. NOT Relaxed. - Tue - EOW We’ll run moderate light, Low-Moderate Feed (EC: 1.1) __ Fri Mar 28, 2025 TH 1Q25 8:B:1:1 All plants have lifted, with minor praying at least.  Applied Remaining Gallon of Root Steering solution. TODAY we switch to Rooted Leaf Medium @ 1.3 mS/cm. At this point the Coco should be WELL BUFFERED with CalMag - Reducing Calcium to normal level, we should be able to run w/ NORMAL Calcium levels, no boots. We’ll see We need - more nitrogen evident in the plants - to get from 351 - 750 µMol/m2/s - To ramp EC from 1.2 - 1.6 When the girls are receptive . . . __ Sat Mar 29, 2025 TH 1Q25 9:B:1:2  PRE-CUT Foliar of MOMs (15 Min before taking Cuts): [ 1, pt] - Cal Mag Fuel: [ 2.5, ml] - Lush Green: [ 0.625, ml] - Resin Bloom: [ 2.5, ml] Wrap Label below Top Node Top to Node 3, Cut plunged in water - [x] 8 Cuts, “Todd’s Haze” - [x] 2 Cuts, Lemon Jeffery Dip Tray - Rooting Powder, Aloe Gel - Top + 2 Nodes Cuts to Rooting Cubes - Cut 45° just below 2nd Node - Gently Abrade cuticle of stem below 2nd Node - Dip END in - Rooting Powder - Beauveria Bassiana - Fresh Aloe Vera Gel - Afix IN Prepped Rooting Cube - 1/4” from BOTTOM NOT THROUGH - Place in Rooting Tray, Cover “Cut Foliar Solution” When All cuts in Dome, Foliar (1 pt) w/ - PCAL 1660: [ .25, g] - KelPak: [ 1, ml] - CalMag Fuel: [ 1, ml] # Acidification of PCAL 1660 - Photosynthesis Plus: [ .75, ml] DAILY UNTIL ROOTED - - [x] Verify Rooting Cubes are adequately hydrated - [x] Light Foliar with Cut Solution Take Cuts WHEN All Phenos are WELL into 6 Nodes - When ALL Cultivars have At Least 6 Nodes: - Top to 3 - Use Crown as Cut for Labeled Pheno - [x] Prep Cut Dome - [x] Pull Seedling Mat (78°F) for use UNDER Cut Dome - [x] Rooting Prep - [x] Rooting Powder - [x] Beauveria Bassiana - [x] FRESH Aloe Vera Gel - [x] Root Riot Cubes MOISTENED / NOT WET Cut Spray Solution - [x] KelPak: [ 4, ml, gal] - [x] PCAL1660, [ 2, g, gal] - [x] Photosynthesis Plus, [ 6, ml, gal] - [x] Check All Pots for Emergent Roots Once we’ve roots at EACH pot - Switch to Normal Fertigation . . . Fertigation: 1 Gal, EC: 1.2-3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml]  __ Sun Mar 30, 2025 TH 1Q25 10:B:1:3 Fertigation: 1 Gal, EC: 1.2-3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] TM-7 (µNutrients): [ 0.5, tsp] # Teabag Style Infusion  __ Mon Mar 31, 2025 TH 1Q25 11:B:1:4 Fertigation: 1 Gal, EC: 1.3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant] IF Initial appearance at Lights on doesn’t suggest “Relaxed, supple,” we’ll run @ EC: 1.1 Until resolved . . . __ Tue Apr 1, 2025 TH 1Q25 12:B:1:5 We’re Running Lowered Light. And reducing EC to 1.1 until we’ve plants that seem REALLY HAPPY. Fertigation: 1 Gal, EC: 1.1 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 3.0, ml] - [x] Silica Skin: [ 2, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] TM-7: [ 0.5, g] - [x] Quillaja 60 Powder: [scant] - [ ]  __ Wed Apr 2, 2025 TH 1Q25 13:B:1:6 EC: 1.1 LightIntensity: [ 400, µMol/m2/s] We only watered 220 / plant, about half of what we’ve been delivering. Foliar: # 1 pt Spray Bottle @ Lights ON - [x] Solar Rain: [ 2.5, ml] - [x] Silica Skin: [ 2.5, ml] - [x] Photosynthesis Plus: [ 1.5, ml] - [x] Quillaja 60 Powder: [scant] __ Thu Apr 3, 2025 TH 1Q25 14:B:1:7 EC: 1.3 LightIntensity: [ 401, µMol/m2/s]. # Staying low, waiting for plants to resolve Fertigation: 1 Gal, EC: 1.3 - [x] Primer A&B: [ 5, ml] - [x] CalMag Fuel: [ 2, ml] - [x] Silica Skin: [ 2, ml] - [x] Lush Green: [ 2, ml] - [x] Root Anchor: [ 2, ml] - [x] Peak Bloom: [ 2, ml] - [x] Kelpak: [ 4, ml] - [x] Photosynthesis Plus: [ 6, ml] - [x] Quillaja 60 Powder: [scant]

My little skunk apple runtz lady man I am disappointed so far with this plant not much can be expected from a pollen chuck seed I made myself but I think it will have nice smoke in the end just not alot most likely The day has come and it's time to flip these ladies to flower. I was planning on letting them go untill Friday and let the smaller ones grow just a bit more but they will be fine. I have the eternity cup contest in mind and I'm thinking timing so I need to get these lady done and out my tent lol. This past week I turned the light up alot getting them ready to flower they have grown a bunch inhavendone lst maybe 5 it 6 times on the branchs and they arw nit bendy anymore that will help durring flower.

What a trip with these Monster Zkittlez. We have almost reached the end, going through many fears we are reaching excellent results for real. I have three young ladies planted one before and two more after 10 days to test the right vegetative times. The first was worked with very aggressive LST and now I dominate many weeks of flowering is fantastic. They are putting all of them very much but they are filling up really well except one that seems lost and is not bad. In fact, the two smaller ones were also low stressed and treated with an aggressive pruning to keep only a big main cola and something lateral. One has filled very well another is filling less and very slowly but still with dignity, I gave it up for lost but even the ugliest is not bad. The big has some scary banana. The frozen speaks for itself sugar dripping from everywhere early harverst next weekend

Day 17 and she is growing nicely, but hope the side branching will pick up a bit for training. Keep freaking out thinking I have mites again but I don’t see them on my leaves. Plus I think I have grasshoppers nibbling on all my gals leaves. As of Saturday Fozzy Bear (we wanted it Fozzie but official paper work says otherwise) joined the family and his new big brother Buddy. He has already grown a few inches since we got him but god is he ever cute, and god bless Buddy for taking his playful shit since

DOPE

The smell is so great wish I’d be getting more nuggets off of this girl but at least it is dense will continue to keep updating as the week goes on

moved her to optic4 led

Day 39 - Gave 1.5l with half bloom nutes each Day 41- Rotated the plants and swapped them to expose even light across the whole plant and watered 1.5l with water and calmeg @ph6.3 Day 44 - Defoliated and did some lst and watered with week 1 bloom nutes @5.8 ph

Anfang der 3. Blütewoche haben wir beide Entlaubt und Lollipopping angewendet. Jetzt brauchen beide Zeit um sich zu erholen.

Week 7 for 9lb Hammer F2, Have finally starter pulling them side ways. Its been raining all week not much to report. Haven't had to water anything.😂 Hoping to see what training her will do.

RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea

Le cime sono belle gonfie e piene di resina, ora i tricomi iniziano a maturare e i pistilli anche. Ultima settimana con i fertilizzanti e poi inizio il flush dalla prossima Questa settimana fertilizzo a circa 850/1100 ppm e ph 6.2

We are just waiting on the trichomes. I will probably cut her down next week. In a few days time. The calyxes have not fattened any more. Here is what I did this week. 17.8.25: I watered with 2.5L of dechlorinated water PH'd to 6.5 with; 💜 1ml Trace PH: 6.5 PPM: 355 21.8.25: I watered with 1.5L of dechlorinated water PH'd to 6.5 with; 💜 1ml Ecothrive Flourish 💜 1 TSP Biosys PH: 6.5 PPM: 354 Thank you for stopping in this week and hanging out 😁💚✌️🍃🙏

Está semana regamos con agua un par de veces y quitamos un par de hojas satélites que tapaban cogollos

Week 2 went smoothly :) the girl looks really good, on the 14th I cut her hair and trimmed her top, I hope she will recover quickly from the stress she experienced and will be able to continue growing successfully :) good luck to everyone :) !!!

Now on 8x nodes per plant.x Day 1 - SB2, 1 stem got broken during training 😩😭😩😭😩... Hoping it will be saved but Day 2 - more aggressive training on both plants to level the main frame

Good day to all my friends and visitors here on GD. At the end of this week EC is at 3.0 so first thing to do next week there will be reservoir change. All goes well looks like the big Tropicanna plant is maturing so probably about two more weeks for her....better photographs will come next week. I spray them every second day with CannaCure or a hydrogen peroxide solution to be safe from the moldy buds. The SE7000 runs at 550 Watt and about 35cm from the canopy and is doing an astounding job. For anyone who is interested in obtaining this efficient and affordable light fixture here's the link: https://spider-farmer.com/products/spider-farmer-upgraded-se7000-730w-commercial-led-grow-light/ Also i included a unpacking recording of one of the packages Spider Farmer send me for the next grow, If you are interested in buying this 6" exhaust fan with filter here's the link: https://cutt.ly/gwjZIk9r Thank you a lot Spider Farmer you guys rock 💚 That's it friends, I hope to see y'all next week.