I yielded just over half pound dry 10oz and abit to be exact not to bad off 2 plants that I could of let go a little longer. The absolutely reak of Gas terpenes very different for me but very enjoyable

This will be her last 4 months in veg. So far she looks promising no complaints.

I’m facing with heat and humidity so high…and i am ordering dehumidifier on the wayyy🚗can’t wait for my babies let me hear your voice so comment me please anything you want

The pot with the white label is the mimosa. The smaller plant is bourbon berry.

Bonsoir les amis, Je suis toujours aussi content et Émerveillé devant mes Fifilles elles grandissent tout les jours j'ai vraiment hâte qu'elles arrivent à terme en espérant qu'elles seront magnifiques. J'ai perdu deux petites fifilles c'était les plus petites (5cm) de haut. Je pense que c'est quand je les est rempoté j'ai dû cassé la tige 😑. Bonne soirée à tous 😉👍👍👍

Still growing like a monster. 60 inches/5feet finally. Still in veg with minor small visual pistils. Continues to show 7 inch a week growth Back part of plant has been bent to increase sunlight spots/main tops

They are happy and healthy!! I cannot wait to get my timelapse camera going because I would have been able to catch these bolting this week! It is super cool how fast they doubled in size!

~ FastBuds Strawberry Gorilla Autoflower Harvest Report ~ The Setup: • AC Infinity 4x4 tent •AC Infinity Cloudline T6 Exhaust Fan w/ Controller 67 •HLG 650R w/UVA Bar *** For some reason GD does NOT have a listing for the USA version of the 650R so I selected the closest match to it. •AirCube Active Oxygen Ebb/Flow 6 pot System •TrolMaster Hydro-X Controller for light •AutoPilot APC8200 co2 controller fed by a 50# tank •16" Hurricane oscillating fan and 8" floor fan •Tent cooling via filtered outside air delivered by AC Infinity Cloudline T6 fan •BlueLab instruments: PH Pen and Truncheon Nutrient Meter ________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ Here we go fam!...after 13 exciting weeks this run of three FastBuds Strawberry Gorilla Autoflowers has come to an end and, despite some hiccups along the way, all three of this phenomenal cultivar delivered the goods! This was my first attempt at 'hydroponic' growing and honestly I made some mistakes along the way. In hindsight, I ran too many feed cycles in a 24hr period which did not allow the medium and fabric pots dry out enough which led to a Fungus Gnat infestation which wasn't caught until late into flower. I also think I had the nutrient level set too high which may have kept the upper portion of the medium too wet. Other than those issues the only other hindrances were related to the actual ebb/flow system itself and beyond my immediate control such as plant spacing, solution temperature etc. I will say that when using this AirCube system I found out the hard way that you really need to have all of your plants starting at the same time, and preferably of the same strain unless you're using a trellis net to control the canopy height. Lastly, I will say that the GrowAce AirCube system was very well built, used quality materials, is expandable, and was very easy to setup and get running. Now to the plants... All three Strawberry Gorilla's were germinated together and sprouted within 24hrs of one another. I did very minimal training on them consisting of leaf tucking and gentle bending of branches, then some LST using horticulture wire starting in Week 1 of flower, which all three responded well to. All three pheno's began to flower right around Day 24 from seed and continued for another 10 weeks. I kept the tent temperatures during veg and early flower between 76-80℉ with the light on, and 70-72℉ with the light off and the RH at 60-70%. Once in flower, I gradually lowered the 'light on' temperature to 72-75℉ and 65℉ during the dark period. I also lowered the RH down to 35-40% during late flower. The entire run they were fed Plagron nutrients exclusively, using their Cocos 'A' and Cocos 'B' along with Green Sensation. Power Roots and Royal Rush. I had nothing but great results from this lineup from Plagron and highly recommend their entire product line! I ended up with three distinct phenotypes, two of which leaning more to the fruity/strawberry side. The third pheno was Glue all the way, with a pungent, chem-like aroma that will make your eyes water! The #1 and #2 phenotypes took on some beautiful coloration through late flower, expressing shades of purple, pinks and lavender. Both of them also had a very fruity/sweet aroma that grew extremely strong during late flower. The #3 phenotype struggled a little bit during the run and was affected the most by the Fungus Gnats (which I'm sure affected her yield) but incredibly ended up not only being the most aromatic of the bunch, but also the frostiest! The #3's flowers were a lime green with hints of pink and lavender on some, all were covered in large headed trichomes! Once the Strawberry Gorilla's reached Week 8 of flower I began regular checks of their trichomes and once they had reached a ratio of 90% milky/10% amber I placed all three plants in darkness for 72hrs in the 4x4, keeping the temperature at 64℉ and a RH of 35%. After three days in the dark I chopped and hung the plants whole in the 4x4 suspended by a wire I ran across the tent. I kept gentle air circulation going in the tent and maintained a temperature of 55-60℉ and monitored the RH, keeping it at 50% for the first 24hrs, then 60% for the remainder of the hanging time. The first plant was ready to trim in 9 days, with the other two 10 & 11 days respectively. All three were trimmed and their flowers placed in Mason jars with a hygrometer inside to begin the curing process. The beautiful 'sugar trim' was sifted on my 24"x24" four screen setup which I did outside on my porch on a calm day that was only 38-40℉. I got a tremendous return of 42g of some beautiful 90u sift that I can't wait to press into rosin! All in all, having cultivated this strain previously I can say that the results could have been a whole lot better, but... taking into consideration my level of expertise with hydroponic growing and the stresses that the Strawberry Gorilla's had to contend with, I'd say that it was a win and a testimony to how resilient and strong this strain from FastBuds is... It's no wonder that Strawberry Gorilla Auto is a trophy winner!🏆

TBA

Week 4 day 1: Happy 4th! 7/4/25

Week 14 (17-10 to 23-10) 17-10 Temperature: 23.4 degrees (lights on) 17.5 degrees (lights off) Humidity: 70% (highest) 55% (lowest) Watering: 400 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 18-10 Temperature: 23.6 degrees (lights on) 17.1 degrees (lights off) Humidity: 70% (highest) 54% (lowest) Watering: 900 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 19-10 Temperature: 24.3 degrees (lights on) 17.8 degrees (lights off) Humidity: 81% (highest) 59% (lowest) Watering: 1210 ml. PH 6.5 EC: 1.7 (with Hybrids & PK+) 20-10 Temperature: 25.1 degrees (lights on) 18.2 degrees (lights off) Humidity: 84% (highest) 62% (lowest) Watering: None. 21-10 Temperature: 25.6 degrees (lights on) 18.6 degrees (lights off) Humidity: 99% (highest) 64% (lowest) Watering: 1200 ml. PH 6.5 EC: 0.6 (without Hybrids & PK+) 22-10 Temperature: 25.8 degrees (lights on) 19.3 degrees (lights off) Humidity: 89% (highest) 63% (lowest) Watering: None. 23-10 Temperature: 25.7 degrees (lights on) 19.1 degrees (lights off) Humidity: 89% (highest) 60% (lowest) Watering: 1000 ml. PH 6.5 EC: 1.7 (with Hybrids & PK+)

I want to apologize for missing so many weeks. I am currently transitioning to San Diego, CA. My Gro could of been better, but living in a legal state. Skies the limit!!!

Gracias al equipo de MSNL y XpertNutrients sin ellos esto no sería posible. 💐🍁 Forbidden Fruit Auto: Forbidden Fruit Autoflower, llamada así por sus deliciosos sabores, es un cruce entre Cherry Pie, Tangie y Siberian Ruderalis. Esta variedad ofrece efectos estimulantes y relajantes con un sabor afrutado, cítrico y a pino. Ideal para quienes buscan un dulce escape. 🚀🌻 Consigue aqui tus semillas: 💡TS-3000 + TS-1000: se usaran dos de las lámparas de la serie TS de Marshydro, para cubrir todas las necesidades de las plantas durante el ciclo de cultivo, uso las dos lámparas en floracion para llegar a toda la carpa de 1.50 x 1.50 x 1.80. https://marshydro.eu/products/mars-hydro-ts-3000-led-grow-light/ 🏠 : Marshydro 1.50 x 1.50 x 1.80, carpa 100% estanca con ventanas laterales para llegar a todos los lugares durante el grow https://marshydro.eu/products/diy-150x150x200cm-grow-tent-kit 🌬️💨 Marshydro 6inch + filtro carbon para evitar olores indeseables. https://marshydro.eu/products/ifresh-smart-6inch-filter-kits/ 💻 Trolmaster Tent-X TCS-1 como controlador de luz, optimiza tu cultivo con la última tecnología del mercado, desde donde puedes controlar todos los parametros. https://www.trolmaster.com/Products/Details/TCS-1 🍣🍦🌴 Xpert Nutrients es una empresa especializada en la producción y comercialización de fertilizantes líquidos y tierras, que garantizan excelentes cosechas y un crecimiento activo para sus plantas durante todas las fases de cultivo. Consigue aqui tus Nutrientes: https://xpertnutrients.com/es/shop/ 📆 Semana 7: Ha sido una semana algo complicada, tormentas, frio y lluvia han ralentizado el crecimiento, espero que pronto lleguen dias soleados, continuo con 1/3 nutrientes recomendados en cada riego.

Ich wollte ja eigentlich die Blüte einleiten aber ich hab noch Veg Dünger gefunden also zieh ich nochmal 2 wochen mindestens durch um mehr Höhe zu gewinnen.

Week 2 starts the 3 plants on the right are the Blood moon gelato. Jungle inc 😅

Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?