Likes
Comments
Share
@Northfork
Follow
9-21-25 Apple fritter is doing great can’t wait for her to finish.
Likes
3
Share
The stretching was going all throughout Week 4 and into Week 5. One plant has reached 32" tall from where it sprouted and the other has reached 28" tall. Both plants are starting to show trichomes, the taller one more so. Feeding has been every other watering which I've found to be every 3-4 days. I'll be out of town starting on 02/03/2024 and coming back on 02/16/2024 and have asked my friend to stop in and water/feed when the plants need it. If everything goes well, I'm going to be excited to see how these girls have progressed in the 2 weeks I am gone.
Likes
34
Share
@MrJoint
Follow
✌️🎃 Thank you for checking my cultivation. ✂️ Last defoliation and LST to receive more light on buds.
Likes
Comments
Share
@WetWillie
Follow
Cut and hung, only the best buds kept, beginning dry cycle. Into jars after 11 days dry, beginning cure.
Likes
9
Share
THERE IS 4 PHOTOPERIODS LEFT IN THE 5X5 TENT. I WILL BE MOVING ALL OF THE PHOTOPERIODS INTO THE 8X8 TENT ONCE ALL THE AUTOFLOWERS ARE DONE, THEN I WILL SWITH THE LIGHTS TO 12/12 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
4
Share
2023/06/19 : nitrogen deficiencies so more orgatrex+bactrex and one more boom boom spray. Almost every plants have pistils now so this is first flowering week I guess... Just got missing stuff I was waiting for (PK compost tea and oxygenation kit) so I'll be ready in a week or two with compost tea (watering every 1/2 week and spray) and bio PK booster (every 1/2 other week) from Biotabs. Light is now at 40 cm, dimmed to deliver 40 DLI with 18/6 day/night. CO2 level is near 700 so I'm thinking about introducing boost buddy to the ladies. They're from 17 to 27,5 cm tall and strectching with big internode space. 2023/06/20 : I removed everything on the lower node, adjusted tutors, completed coco level, etc : #2 - 25 cm first pistils are coming out #3 - 23 cm pistils out #4 - 27,5 cm pistils out #5 - 17 cm very late because of the f@cking jiffy who didn't let the root freely get out 😭 #6 - 25 cm pistils out #8 - 24 cm pistils out 2023/06/23 : still stretching a lot! Made a quick vid. #2 - 32,5 cm a bit late #3 - 28,5 cm OK #4 - 34 cm OK #5 - 21,5 cm very late #6 - 29,5 cm OK #8 - 28,5 cm OK
Likes
7
Share
@420keef
Follow
Just cut up the lemon shining silver haze yesterday, first pics are from after i cut the wonder pie (from another diary) and i put one of my plants from outside there instead. Going to post more updates when i can actually smoke it!
Processing
Likes
Comments
Share
the buds are swelling nicely now starting to reduce the amount of feed i give it and increase the {Rain water} ,we use water from the sky all times we find its the best source of water for plants. This project is to show you can have an idea in mind and for fill it T shape {top shelf} This is all down to the spacers and remember this was a cutting straight into flower as are most of my grows,if anyone is into this and would like to learn then drop me a text. we can send you some free spacers.
Likes
4
Share
Yooo what's brackin fam!!! Let's get into the last week of veg update!! So the girls are really thriving and pushing along I'm actually going to flip to flower this Sunday check th videos and as always fam thanks for stopping by lfg!!! ***************************************** 8/12/2024 Yooooo what's good gang last day of veg, flip to flower is manana lfgggggg
Processing
Likes
9
Share
Topped and installed the scrog net this week, they took a bit to recover from topping and also defoliated 48 hours after. Changed out the nutrient solution and upped the nutes. I was hoping for more growth at this point but overall I think I'm only about a week behind. Being my first grow, I didnt know what to expect.
Likes
5
Share
Eccoci di nuovo qui!!! Super eccitato per questa nuova collab con Spliff Seed, che mi ha dato l’opportunità di testare questa nuova genetica e di condividere i progressi con tutti voi!!! Come sempre partiamo nei bicchieri per poi travasare.. Questa volta verrà svolto tutto sotto la Lumatek Zeus 465 ProC, mi aspetto molto da questo ciclo!! Purtroppo ho perso i file delle scorse settimane e dovrò reiniziare il report da ora scusate per il disagio Grazie a tutti per il supporto ❤️🍀🔥
Likes
3
Share
Outdoor temperature up 15C. Indoors, in grow room, 5C up on last week. Epic week of growth - lush, green canopy. Finally understand the bouncing PH issue. Weird that no-one talks about it for the beginners. Your DWC needs daily attention. In any 24hr period, the PH rises from 5.5 to 6.5, and must be brought down again with PH Down. Thus in any one day the roots span PH=5.5-6.5 and are capable of absorbing a range of nutrients, which are absorbed into the plant at various different PH levels. Currently feeding 13l pot with 5-10ml of Ionic Hydro Bloom daily (EC=1050-1150), 5-10ml of Liquid Oxygen daily, 1l of water daily. On Sundays, they also get 15ml of Liquid Silicon. PH adjusted daily. No sign of buds developing yet.
Likes
14
Share
Ciao a tutti, cari amici coltivatori guerriglieri e non!🤙🏼 questa terza settimana è stata abbastanza impegnativa perché ho iniziato ad applicare la piegature (o Lst come la si voglia chiamare). Solitamente uso questa tecnica perché trattandosi di una varietà autofiorente è meno stressante per la pianta e abbinata ad una “regolare” defogliazione permette di ottenere dei risultati interessanti in termini di raccolto. Oltre a questo, la parola d’ordine di questa settimana (fortunatamente conclusa) è solo una: FREDDO! infatti, dopo un inizio settimana di temperature piuttosto miti, la temperature sono diventate più fredde. Ah…che sia chiaro, quando dico "freddo" mi riferisco a temperature più basse dei valori ottimali che comunque che rendono più stentato lo sviluppo e la crescita della mia piccola bimba (dovrei cercare un nome da darle😅). Nel complesso però la mia piccolina boxeuse si difende alla grande!🥊 01/05/2022. 1l d’acqua: Ph: 7.0 Ppm: 397 T: 24º Altezza:7,5 cm T Max: 29º T Min: 18º Hum Max: 87% Hum min: 46% Sembra in buona salute, ha un colore verde vivo ma la crescita sembra un po’ lenta. Ancora niente prodotti. 01/08/2022. 1l di soluzione nutritiva: Ph: 6.20 T: 21,6º Ppm: 679 Temp. Max (lampada accesa): 27,4° Temp. Min (lampada spenta): 18,1° Hum. Max: 71% Hum. Min:49% Oggi si iniziano a dare un po’ di nutrienti, io utilizzo la linea dell’advanced nutrients ph perfect Grow/Micro/Bloom come Base (1ml x 1L di acqua demineralizzata per ciascun prodotto) più B-52 e Voodoo Juice (2ml x 1L d’acqua demineralizzata). La piccola non presenta problemi, ha un’altezza di 10 cm e sta sviluppando il 3° internodo, se continua così tra qualche giorno si inizia con LST. 01/10/2022. Oh oh…😲 le foglie più giovani mostrano una leggera clorosi ai bordi con venature leggermente più scure, potrebbe essere dovuto a un Ph sbilanciato oppure a una carenza di calcio e magnesio. Forse conviene darle una leggera fertilizzazione tramite spray fogliare. 01/11/2022. Bene, la clorosi fogliare 🍁 perdura quindi proviamo a risolvere il problema con uno spray fogliare : Advanced Nutrients Sensi Cal Mag Xtra: 2ml x 1L d’acqua. Una bella spruzzata generale sia sulla pagina superiore delle foglie che sulla pagina inferiore in modo da permettere agli stomi di assimilare la soluzione. Iniziato LST piegando la cima apicale fino a farle quasi toccare il bordo del vaso.
Likes
10
Share
@BodyByVio
Follow
This week I Supercrop all the plants and spred them out over both lights. One more week of Veg and they are ready to explode Check me out on Instagram @growmorestressless
Processing
Likes
10
Share
Plants are doing well, The 84" inch tent is a must if your not training or topping. I removed all the sacks that appeared last week and I haven't seen anymore show up so fingers cross, I check daily. Bigger tent also helps with heat control as the air has more room to rise. Hope you all like the pictures, I started to take videos as they provide more detail with less work.
Likes
73
Share
Hello everyone , masters and beginners ..... my Dutch daughter has been able to satisfy me great! autoflowering with maximum yields and rock-solid buds! the smoke of her? sweet, tropical and beautiful powerful! From true Dutch thoroughbred can give a lot of highs