Hello fellows growers ✌️ First week of flowering, plants started their stretch after 5 days of 12/12 lights cycle. And some plants showing their first white pistils. I gonna start to cut some shoots at the bottom of the plants, I already know these small ones won’t reach the top. And will start to unplug some few big fan leaves, that are covering shoots just below the canopy to give them some light. ✅New Growers Tips ✅ ✅Switch to 12/12 light flowering cycle when your lights are half way to the ceiling. ✅Stick on your Veg. nutrients to give them Nitrogen to support the stretch and avoiding any dieback situation (plants yellowing from the bottom, moving their Nitrogen to save the top) around week 4 of flowering. That’s all for this week folks 😉 Stay tuned 👍

Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ________________________________ 📅 D77/B15 - 31/01/24 ⚗️ EC: 1.2 pH: 6 🌡️ T: 19-22 °C H: 40-60% (Min-Max values taken from the app.) 🌊 2L 🍗 CalMag - Bloom A-B - Bud Candy - Big Bud - B52 💧 💼 Thanks to the TM+ Pro app and the use of the Humidifier now the T-H of the enviroment is correct and i got quite good VPD (Vapor Pressure Deficit) rate 🧠 🚀 🎬 Added Timelapse video ________________________________ 📅 D78/B16 - 01/02/24 ⚗️ EC: 1 pH: 5.9 🌡️ T: 19-25 °C H: 45-70 % 🌊 2L 🍗 💧 💼 🧠 Quite time to change res 🚀 🎬 Added Timelapse video, 3 pics and "TM+ Pro" App screenshots of T-H values daily graph, and quite perfect VPD daily rate ________________________________ 📅 D79/B17 - 02/02/24 ⚗️ EC: 1 pH: 6.2 🌡️ T: 19-25 °C H: 40-60% 🌊 🍗 💧 Added few drops of pH- 💼 🧠 The res was for many time on the upper side of pH range, so now I would like it to goes down to a more acidic solution. I'll do it on the next res change, maybe tomorrow 🚀 🎬 Added Timelapse video but today it was trunked because of a problem on the camera, but I posted it anyway ________________________________ 📅 D80/B18 - 03/02/24 ⚗️ EC: 0.15 pH: 6.6 🌡️ T: 19-25 °C H: 40-60% 🌊 RES Changed 💦💦💦. Flushing until tomorrow 🍗 💧 💼 🧠 🚀 🎬 Added Timelapse video and VPD, T-H graphs screenshots ________________________________ 📅 D81/B19 - 04/02/24 ⚗️ EC: 1 pH: 5.7 🌡️ T: 19-25 °C H: 45-65 % 🌊 15L 🍗 CalMag - Grow A-B - Bud candy - B52 - Big Bud 💧 💼 Some defolation and sistemation of buds 🧠 🚀 🎬 Added Timelapse video and VPD, T-H graphs screenshots ________________________________ 📅 D82/B20 - 05/02/24 ⚗️ EC: 1 pH: 5.4 🌡️ T: 20-25 °C H: 52-84 % 🌊 🍗 💧 💼 Little defolation and raised up the lamp 🧠 🚀 I forgot the humidifier on manual mode, so H increased until 80%and VPD went out of control 🎬 Added 4 pics, one is from timelapse set. Added Timelapse video and screenshots ________________________________ 📅 D83/B21 - 06/02/24 ⚗️ EC: 1 pH: 5.0 🌡️ T: 19-25 °C H: 45-70% 🌊 🍗 💧 💼 🧠 pH decreased a lot and it's a good thing it stay on the acidic side for a while 🚀 🎬 Added Tmelapse video and screenshots of VPD and T-H

This week don't listen to none of the info I just wanted to post pictures, videos

Week 8 of flower, started flushing with "clean fruits" few days ago. Also picked all the bigger leaves out and removed the ScroG net. Buds are very dense and hard, so I will harvest as soon as possible to prevent bud rot. First sugar leaves seem to have tendencies for moulding soon as they started turn brown. I will try to raise the temperature a bit and reducing the air humidity. They are very sticky and now offering a strong smell. I only open up the tent for 5 minutes and the smell is exploring the whole house. Wife is not amused.😂

Welcome to my next grow/experiment! Amnesia haze holds a special spot in my heart ever since I experienced it at the Amsterdam cannabis cup in 2012 - really looking forward to this one. I have plans to top once and hopefully be successful at making a clone to reverse. From there I’d like to maybe make some F1, and S1 seeds as well as breed it with the cultivar sharing the tent: Mephisto’s White Wedding. Started off germinating on Saturday 2/3 by soaking the seeds in a cup of water for 24 hours before transferring to a wet paper towel. On Tuesday 2/6 tap roots were present and they were moved to rapid rooter plugs and put into a humidity dome. On 2/11 they had sprouted up 3” and were transferred to the top fed RDWC system. Filled the reservoir following General Hydroponics 10 part chart at light strength and diluted by 50%. SE7000 is ~30” above at 40% providing ~270ppfd.

Legend Timestamp: 📅 Measures: 🛠️ Water: 🌊 Actions: 💼 Thoughts: 🧠 Events: 🚀 ________________________________ 📅 D50/F11 - 12/10/23 🛠️ EC 1.3 (stable) pH 5.5 (raised) -- pure water 🌊 RES Changed 💦💦💦 💼 Made some LST on the little one. No more work on the bigger 🧠 I'm going to change the water within today and run it for 12-24h and then put only bloom nutes 🚀 ________________________________ 📅 D51/F12 - 13/10/23 🛠️ EC 1.3 (by set up) pH 5.5 🌊 New water, calmag, bloom A and B and B52 💼 Removed all LST constraints on the big one. Some spouts removed from the little one. Some defolation 🧠 All training was removed now I will let her grow normally 🚀 ________________________________ 📅 D52/F13 - 14/10/23 🛠️ EC 1.0 (falling) pH 6 (rising) -- EC 1.3 pH 6.1 🌊 No water added. Added Big Bud and Bud candy to raise EC until 1.3 💼 LST and defolation on the little one. Made Timelapse video. 🧠 She's eating a lot: very good 🚀 The little one is sprouting out the first petals ________________________________ 📅 D53/F14 - 15/10/23 🛠️ EC 1.1 (falling) pH 5.2 (falling) -- EC 1.45 pH 5.4 🌊 Water decresed a lot. Added 4L and Bloom A-B - Calmag and a little of Rhino Skin (silica) 💼 LST on the little one, some defolation on the big 🧠 I would like to have only nice big fat buds, so I need to work on this goal 🚀 ________________________________ 📅 D54/F15 - 16/10/23 🛠️ EC 1.5 (rising) pH 4.7 (falling) -- EC 1.4 pH 5.4 🌊 Water decresed a lot. Added 6L Bloom A-B and lot of Calmag 💼 Only a little defolation 🧠 Next time, no calmag at all 🚀 By mistake I added a lot of calmag so to balance I have to add lot of water and now the pot is completly full. Keep in mind there is a lot of Calmag in it ________________________________ 📅 D55/F16 - 17/10/23 🛠️ EC 1.5 (stable) pH 5.2 (rising) -- EC 1.2 pH 5.4 🌊 Added pure water and a little of silica (Rhino skin) 💼 🧠 🚀 Some leafes tips are burning, so I'm going to go back to 1,2, trying to have a good pH range ________________________________ 📅 D56/F17 - 18/10/23 🛠️ EC 1.2 (stable) pH 5.7 (rising) 🌊 No water neither nutes added 💼 Little defolation 🧠 Maybe the Thrips from Granada come out and infected Marlene. I will spray also her tonigh 🚀 Some symptoms of insects like leaves bitten

The smell not strong not sure what I did wrong started the flush today my first indoor all most done these lady's are big learned a lot on plant for now on and been looking in too dwc I'm go one more grow in soil then I'll be ready try dwc thanks everyone for joining me in this journey hit that like button if you like this grow and watch it I'm going miss drinking coffee with theses lady's

This week I defoliated to get my RH to +-50%. I removed fan leaves, low bud sites, and some branches that would not have produced. If anyone regularly grows around 60%-65% RH please let me know if you have run into any issues. After defoliating the roots still took nutes as if they had more fan leaves and now there is some burn on about 5% of the leaves and their tips, a couple days later. I expect this to stablize this week which I suppose is a benefit of growing organically.

My first plants! 4 weeks! I love it ! ❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️

*****Week 9 - September 14 to 20, 2020 - Days 57 to 63 from germination****** They were feeding well this week and took the higher more consistent amount of nutes well this week. Had to make a decision at the end of the week and I took out the small full spectrum light to put in the photo tent. They are in flower now and I held off as long as I can. These girls are closer to the end and I will keep the intensity focussed on LAK3 and GSC and let the other two live in the shadows and ripen😎 Not my first choice but everything is a trade off in life unfortunately☹️ Not an issue outdoor growers deal with👍 Little more detail: Sept 14/20 - Day 57 - Massive @ 3ml, Terpinator @ 2ml, Vitathrive & Liquid Weight & Rezin & Dual Fuel @ 1.5ml - 1,000ppm and 5.8pH - Feed for only LAK1......other girls area going to dry out another night. Sept 15/20 - Day 58 - Overdrive & Rezin @ 2ml, Liquid Weight & Vitathrive @ 1.5ml, Dual Fuel @ 1ml - 650ppm and 5.6pH - 2L given to each girl Sept 17/20 - Day 60 - Overdrive & Rezin @ 1.5ml - 200ppm and 5.3pH - 2L each given to the girls. - Just a bit to help with swelling. Sept 18/20 - Day 61 - Massive @ 3ml, Terpinator @ 2ml, Vitathrive & Liquid Weight & Rezin & Dual Fuel @ 1.5ml - 1165ppm and 5.2pH - LAK1 - 4L, LAK2 - 2.5L, LAK3 - 3L Sept 20/20 - Day 63 - Terpinator @ 3ml, Overdrive @ 2ml, Sensyzime & Vitathrive & Liquid Weight & Rezin & Dual Fuel @ 1.5ml - 1045ppm and 5.3pH Wrapping up week 9 and heading into week 10........the days ahead are going to be the guessing ones......is she done yet???? To be honest I have not even looked close at trichome yet🧐 I fully expect to see day 74 with LAK1.......not sure LAK2 will make it that long???? LAK3 will still be a couple of weeks yet but she is roughly a week younger. Cheers Growmies and have a great week ahead🙏😃😃😃

And so it starts ..... 🌱 Germination date 🌱 12/07/2021 Day 1 15/07/2021 Strain 🍁 SinCity seeds Frosted Biscotti (Biscotti Sundae x Whitenightmare) THC% • Unknown 💡 Mars Hydro FC4800 • Power draw 480W + 5% • Max coverage 5 x 5 • LED 2070pcsSamsungLM30B1&Osram660nm • Max Yield 2.5g / watt • Noise level 0 DB • Removable Driver +2m cable • Daisy chain (multiple lights) https://marshydroled.co.uk/products/mars-hydro-fc-4800-led-grow-light-samsunglm301b-commercial-greenhouse-medical-indoor-kit 🇬🇧 https://www.mars-hydro.com/buy-fc-4800-480w-4x4-energy-saving-full-spectrum-commercial-led-grow-light-mars-hydro-for-sale 🇺🇸 PROMO CODE • (ORG420) DISCOUNT 👍🏻 marshydroled.com ⛺ Mars Hydro 120 x 120 x 200cm 📤📥 AC infinity 6inch 💧 10lt dehumidifier ❄️ 3.1kw air con system 💉 Nutrients GreenBuzzLiquids Organic Grow Liquid • 1-4ml until 2wk flower Organic Bloom Liquid • 2-4ml flower stage Organic More PK • 2-4ml +wk3 of flower Organic Calmag • 1-2ml/lt whole grow Fast Plants Spray • first 3days at night lights off More Roots • 2-5ml veg +2wks flower Fast Buds • 5ml +wk2 of veg until 1wk flower Humic Acid Plus • 2-5ml whole grow Growzyme • 2-5ml whole grow Big Fruits • 2-5ml flower stage Clean Fruits • 5ml flush 1wk Ph powder Root Gel Living Organics https://greenbuzzliquids.com/ 🥥 Growing Media • Coco Coir Notes 📝 Light was set at 35% but raised it to 50% as I needed another degree of heat. Removable driver is a god send. I have it on bricks outside the tent to help consume some heat from the driver. I will wait until these girls are adult veg until I start upping the light % New Nutrients have started well 🌱 fast plant Spray seems to of worked nicely and love the Organic farm smell they all give off Happy growing fam ❤️🌱🍁👍🏻

COMING SOON!! The tent and everything is all clean and sanitized 👍. Had some issues but now im Almost ready FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Day 50 since Germaniation. Genetics are really nice and strong. Even against high amounts of nutritions. Rqs never disappoints but this genetics i like the most so far. Cant wait to see the result

5.30 6.01 Herro squints and rabies. WElcme to me circus. We do it with water this week. dun Dun dUN! they finish on le morrow which really mean fucking never!!!!!!!!!!!!!!!! Justa wait n see for them trichys to go ar RICKY RED biatch. REDRUM REDRUM REDRUM - dance with me danny boy. ..,,,,<<<::::,,,,,,,,,,,,,,,,,,,,,a,,a,,,a,,,a,,,,,,,a,,a,,,,a,,a,a,,a rehpleh** hsinif 6.5 F65 Oh, um hi. ^^ I don’t really remember that. Shit just comes out of me sometimes. Gotta go get my chakras checked. Uhh. This week finished up strong. Turns out I can’t count, and it has actually only been 65 days since 12/12. So yeah, they aren’t taking as long as I thought before. A few plants have really slowed/stopped their pistil output and are starting to amber over. SROG, Deadstar, a couple Passion berrys and 1 sweet pink. That’s all for now.

Se tuvo algunos problemas como fungus gnat y otras complicaciones pero se termino