Really light hairs. Smells really sweet with a little kick and a great way of double toping

Final product is been absolutely amazing on these clones - the jungle came out about average but the clones definitely exceeded expectations there absolute fire in comparison but still just as good hopefully I can just improve a few issues we had on this run and dial right in 100% will be so much better, next few run is going to be special I’ve got a few things lined up. From tester packs to breeders packs I can hunt from. So lots to choose from but what to keep to run will be interesting

3/2 I gave my plant its first feeding. Gave it about half a gallon of water with a PPM of 500. I also thought about topping my plant but am not really sure where. I am not sure what one is the top spot as this is my first time every growing. I also finally received my ACInfinity CLOUDFORGE T3. This has allowed me to get my Humidity levels more under control. I was okay before because of the dome but for the last week or so I have not had a domain and my humidity has not really be regulated. 3/2 A few hours later I said fuck it and just cut the plant where I thought the top was. I cut off a few lower fan leaves. Not sure If its too early to do it or not. 3/3 Finally got my ventilation setup. I am not longer venting into the room my tent is in. I now have the exhaust being vented outside. This has allowed for better temps in tent. I am not longer being baked alive. I have also noticed a lot more stability with my temps/humidity now. Temps are sitting at 78-80ish and my humidity is sitting around 60 percent. 3/5 I started LST as my gardening ties arrived this day as well. 3/6 Today I gave just shy of 1 gallon of RO/DI water with a pinch of Epsom salt. I was waiting off as I forgot to added to my first feed on the the second. After the watering I also saw my rapid rooter exposed as the soil seemed low. I think I didn't fill the pot enough. I also added some extra soil to top up the pot and make sure the rapid rooter was buried. I also collected my run off and checked its PH and PPM. PH was 6.2 and PPM was 863. Plant also seems unhappy this morning.

The bud is knock out stuff definitly a night time smoke, too much of this stuff will put you to sleep not to mention a bad case of the munchies before hand. overall growing this strain was easy and enjoyable plus it was great for edibles I made triple choc fudge brownies with the sugar shake that were really good for pain relief I have chronic back pain and this stuff takes it away 👍👍👍

Hey everyone 🤗 It's getting full of buds 😍. When you open the tent, an extreme smell of Sour Diesel wafts through the room 😍. They develop super fast, look beautiful and hardly stop :-). Next week I'll go down a bit with the Ec. I wish you a lot fun with the update, stay healthy and let it grow 🌱👌 Strain : Sour Diesel ☝️🏼😍 Genetic: Diesel x Northern Lights 👍 Vega Lights : 2 x Todogrow Led Quantum Board 100 W 💡 Flower Lights : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡 ☝️ Soil : Canna Terra Professional + ☝️ Nutrients : Canna Terra Vega, Canna Terra Flores, Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal/Mag, Canna Ph - Grow, Canna Ph - Flores ☝️ 🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 💦 💧

Like they say a picture says a 1000 words...these girls have been loving their new location and weather, no complaints just growing and glowing.

Welcome back 🤗 Another week has passed and I’ve started adding a small amount of Grow nutrients to the mix🌱 Cranking up the light a bit again this week trying to maintain about 400PPFD. See you next week 😎🤙🏻💚 ------------------------------------------------------------------------------------------ Light source: Medicgrow SpectrumX 880W LED Build in PPFD 4 controllable spectrums V1, F1, VS, FS Visit https://medicgrow.com/ for more informaton. Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/

I’m adding a timer to my exhaust fan so it won’t be running 24/7 I’ll set it to exhaust the dry room every 3 hours for a half hr. I have my dehumidifier running in there so it’s not going to get above the set level. My only concern is mold, considering I only ever lose a few grams each harvest from mold I figure I should be safe if my humidity stays under 50 from here on. Would have went a lot smoother if everything was done the same day because the humidity would gradually go down on its own while the buds dry out however I have been adding plants as they finish causing timing to be off. Would have liked to just check them every few days. Now I’ll have to check them daily knowing some will be dry before others. Bright side is that gives me a break from trimming. It’s only me trimming so it’s going to take me a while. Roughly 25 plants each with a few ounces so I hope it’s only around 2000 grams to trim by myself

Start of week 8 of flower..... Lights are only on for 11 hours of the day now..... Only water in my res now until i think its the right time to havest... i made a lil video i hope you like it.... enjoy and happy growing

Smelling great and getting frostier by the day. Trichs still mostly clear with a few going cloudy. Dropped temps a few degrees. Buds are lovely and dense. One more week of feed then flush.

Привет 🖖 С новым годом 🎅 2022 самый ужасный год в моей жизни! Он был сложным во всем, экономический кризис, война....... Я добавил видео, это 2 ракеты 31 декабря упали рядом с моим домом, русские нацисты обстреляли жилой район, умерла девушка 22 года ей было..... 4 человека получили ранения..... Так страшно ещё не было! Мы встречали новый год под обстрелы ракет и звук сирен тревоги в полной темноте...... Россия государство террорист убийца 😣 Это мой блог и я хочу здесь делиться своими чувствами и эмоциями, что бы больше людей знали что происходит. А теперь дневник. На этой неделе растения стабильно получали 20 часов света, это очень помогло им стать больше и сильнее. Я продолжаю тренировки LST. На этой неделе была обрезка веерных листьев, я часто практикую дефолиацию автоцветов. Надеюсь проблем со светом не будет, растения уже показали "усы" свой пол, значит стадия предцвета будет примерно через неделю, хочу что бы они стали ещё больше и набрали "мяса" массу. Ещё раз поздравляю всех с новым годом. Мира вам и вашим семьям, и мирного неба, что бы в ваш дом не прилетали ракеты. 🇺🇦 🇺🇦 🇺🇦

harvest day for the AK47 and Amnesia Haze

This lady hasn't stretched up so much during pre flower, she has a nice size anyways and I cannot smell any terpenes yet on day 23 of flower, I cannot wait to see how this lady develops some big and sticky flowers! Stay with me on this journey guys! Let's keep on growing!, 💛💚❤️👨‍🌾🔝

Bisher läuft alles ruhig. Sie wächst sehr gut und sieht stabil aus. Die Blätter entfalten sich wunderschön, die Blütenstempel schreiten hier schneller voran. Zum Gießen: Sie trinkt sehr gut und nimmt mit der Zeit immer mehr Wasser auf. Anmerkungen: Noch immer gibt es tägliche Fraß Schäden! Neemöl habe ich bereits eingesetzt! Aber ich muss sagen, dass ich meine Frustration darüber deutlich reduziert habe. Insgesamt bin ich zufrieden! Ich wünsche euch allen eine schöne und erfolgreiche Woche! Beste Grüße, LueRootsGrowGermany

The harvest went well, I left it in the dark for 2 days before cutting it. drying 12 days at 60% humidity the smell is crazy, I can't wait to taste it

Everything's going smoothly so far. Doing a defoliation tomorrow and getting rid of any lanky branches. This should be my best crop yet with photoperiods. It should be noted that there is a difference between defoliation and lollipopping. I didn't realize there was one until last month.

Blütewoche 2 Die Blüte beginnt Die Pflanze streckt sich und entwickelt Blütenstände. Der DLI wurde sukzessive auf 40-45 angehoben. Der Düngeplan bleibt unverändert. * Zustand der Pflanze: Kräftiger Blütestretch, erste Blütenstände sichtbar. * Wichtige Ereignisse: Anhebung des DLI. * Düngung & Messwerte: * Gießwasser: pH ca. 6,3. Leitwert 1,4 bis 2 S. * Drain: Wir stellen sicher, dass der pH-Wert nicht unter 5,5 und nicht über 6,8 liegt und der Leitwert die +/- 500 S Abweichung einhält. * Anpassungen:

Week 10 From Seed | Week 6 Flower 🌸 Quick Recap — How We Got Here 12/12 from seed, no wasted time—just a straight path into expression. From early on, these girls showed intention. Strong structure, steady vertical growth, and a clean transition into flower without hesitation. We kept the environment stable and let them lead: • Temperatures around 26°C • Humidity steady at 60% • Balanced feeding, building up gradually No forcing. No overworking. Just guiding and observing. And now… here we are. ⸻ Current State — Week 6 Flower This is where things get real. The room is alive right now: • EC: 2.0 • pH: 6.5 • CO₂: ~1000 ppm They’re drinking around 2L per day in 14.5L soil, which says everything about their metabolism and comfort. Structure is holding beautifully— Stacking tight, forming dense flowers, and starting to push real frost. The smell? Strong already. The kind that tells you something serious is building. Everything feels aligned: Healthy leaves, active uptake, no hesitation in development. This is the phase where the plant shows you what it’s truly capable of. ⸻ Observations • Buds are thickening daily • Resin production is clearly ramping up • Strong terpene expression already present • Plants are fully in sync with the environment • Water uptake confirms high metabolic activity They’re not just growing… they’re performing. ⸻ Looking Ahead — Week 7 Next week is where things usually shift from “building” to “refining.” Expect: • Increased density in the flowers • Noticeable swelling across all sites • Frost development accelerating • Terpenes becoming louder and more complex This is where patience matters. Stay consistent, don’t chase—just support what’s already happening. ⸻ Gratitude 🤝 Big thank you to everyone involved in this run: • The genetics — for the blueprint and expression • The gear — LEDs, tents, airflow, all the silent workers behind the scenes • The sponsors — for the support and trust • The GrowDiaries community — To the OGs, the long-time supporters, the new followers joining the journey… To the ones who show love, and even the ones who question—respect to all of you. This space grows because of all sides. And of course—GrowDiaries itself, for giving us a place to share, learn, and evolve together. ⸻ Week 6 flower. Fully in motion. Let’s see where they take us next. From grower to growers 🌱 📡 DELETED @ 1K Please stay tuned.we never quit https://www.youtube.com/@TheDogDoctorOfficial NEW 🙏 Thank you for your patience and continued support.FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74

This week was amazing guys. I literally watched the buds getting fat day by day. I am still feeding with a similar program and adding Aptus Regulator once per week to boost silica and some other minerals like molybdenum and boron. I'm flowering my plants in a hot environment with CO2 boost. PPFD is high to support these settings and thankfully my the pots aren't getting hot. No fungus gnats or any other pests, no root rot and bad smell. Everything is perfectly neat and buds are exploding. My expectations from this harvest is really high and I'll keep adding CO2 for another week. Some fellow growers asked for CO2 and PPFD measurements. I am sharing these information on this week's pictures. I got my CO2 meter fixed and I tested the CO2 PPM in different places of the canopy. Typical value for this grow tent with this CO2 setup is around 1100-1350. Temperature is fluctuating between 28-31 and the average PPFD on the bud sites is 1100 micro moles. I'm sharing CO2 measurements right under the fan, where you expect it to show the lowest value. Then I'll also share the CO2 PPM value coming out from the air pipe, which is normally attached to the grill of the fan. Direct output is now around 5500PPM and in the first two days, the meter shows 10000PPM which is the max value that it can reads. This bucket yeast CO2 reactor lasts for four days and I'm refreshing the mixture twice a week. This is huge CO2 with a fairly low cost compared to propane burners or CO2 tubes. Edit: I refreshed the CO2 bucket today and got you guys a video of the direct output. The system is outputting more than 10000PPM of CO2 and the meter can't measure it for the first two days. This CO2 method is a killer one for tent grows. Very low cost for very high CO2 concentrations. Hope these information helps. Happy growing 💪