Bonjour à tous les padawans et les maîtres jedis

Fastbuds Meme Video Contest

Empiezan a oler bastante bien. El primer riego de esta semana fue de 1200ml. Les he conectado un extractor con salida a la calle porque empezaba a oler toda mi casa. Último riego de la semana 1500ml

Hello and welcome to Bertha's final week! Big news! On day 72 aka today.... ... ... Bertha was pulled! I need the space now and shes not maturing properly, foxtailing and no further development except brown pistils. Trichomes 5% amber on oldest colas. Harvest report when dried. I haven't weighed wet as it's too awkward.

Day 76 - 07/12/19 The Quick One has turned into a Fat One! The colas are just huge! nice lavender smell and very sticky! the buds also look a lot more dense this time compared to my last diary probably due to adding calmag and pk13/14 and this plant is over twice as tall haha. it finished its stretch at 43cm so shouldnt be a bad sized harvest. I fed the plants last night with their last dose of nutes and im going to start flushing from today right up until harvest. My tap water is at 140ppm so this should be okay for flushing. ive grown all my plants with this tap water and tbh i used to let it sit out for a day or two to evaporate chemicals but i havent done that in ages. plants dont seem to mind it straight from the tap. but yeah flushing from today right up until around the start of next week. it should only need a week flush as its coco coir but im expecting to harvest on Day 85. The top of the main cola started to look weird and was definitely getting burned from the light. i took a small bit off as i cant adjust the height of my lights just now, gotta fit these rope rachets the light is just so damn heavy lol. im not worried tho, expecting about an ounce from this harvest, maybe more from my diesel auto diary. Still im very proud. this is my first plant with big colas, and not only tall but fat! cant wait to see how dense the buds turn out to be and i think my last harvest was at week 9 so this has had much more time to mature. I pulled a lot lot of leaves off this plant as they were crispy and yellowing. ive been feeding light amounts of nitrogen for a while so its either just the plant yellowing or the crispiness is light burn. either way you will notice from the pictures. upper colas have no fan leaves lol. and i added a couple of photos through the jewelers loupe, couldnt really get a good angle. but the breeder estimate is 8-9 weeks and il be finishing on week 12 so itll most likely be ready. I got a few more seeds and they are going to be stunning! award winning genetics and also exotic and high thc autoflowers! im using biobizz light mix and i should be starting once i harvest this diary so keep an eye out for that and check out my other diaries if you get a chance. Day 78 - still giving 1.8l of water per day. wanted to ensure im getting all the nutes and salts out of this so i gave 1.8l of phed water earlier in the day and 1.8l of phed water 6 hours later. going to try stick to the 1.8 per day as the soil dries out overnight with that amount :) Other than that the plant is looking great. some faint purple colors and its pretty frosty! nice big buds. once the plant is harvested and trimmed im gonna dry some on a drying rack for about a week. and some hung up to dry in a cardboard box for 2 weeks. Day 79 - 10/12/19 Harvested the top half of a side cola today so its cured just before christmas 🎄 and i wanted to let light penetrate the lower buds! Have a look at the pictures and let me know what you think in the comments :) Biobizz light mix arrived and im thinking of starting my next batch of seeds, keep an eye out for those diaries starting up :) I plan to harvest on day 85! so excited for this one! Day 79 same day update: Took a few pictures of the bud drying :) im gonna dry it slowly and just let the 21-23c room temperature 50-60% humidity do its job. and let me know what you guys think about using a drying rack like in the picture for buds? Day 80 - 11/12/19 A few days shy of 12 weeks now so i decided to harvest another couple of side colas! Snipped a cola down to individual buds removing all trim and the other cola i didnt break down i just trimmed. il add photos tomorrow to show what i mean :) The trim was really frosty and looked quite cloudy/plastic and the buds are covered in cloudy/amber pistils. I smoked a couple of bongs of the test bud which has been drying for about 24 hours now and im pretty stoned! very relaxed in my back and shoulders. no muscle pain. my head is heavy with enhanced audio and visuals :) this is turning out to be a beautiful afternoon smoke! very proud of myself :) Only a few more days until full harvest and i cant wait to cut the main cola down. id say the main cola could be near an ounce when dried as it looks thicker than my arm 😂 Day 81 - 12/12/19 What a night ive had :) been up for ages fine trimming 2 side colas i pulled off the plant tonight. the flushing was worrying me with the extra humidity rise. i added a ton of pictures to show off the whole ordeal as best as possible :) and i came across some mold halfway up one of the giant colas. was a very small pocket of fluff so i cut around the affected area and didnt lose too much (about 2g if dried) the side colas were so much bigger than expected. completely filled my whole raw tray with buds and my drying rack is starting to fill up. Im like a small child again as these colas are the biggest individual piece of weed that ive held :) really proud that i grew this! I also got a lot of trim and little popcorn buds. gonna keep then for edibles and dry up these test buds. 3 Days until harvest of the main cola :) and check out the pictures and videos i added at the end. huge colas! :)

24 Oct 2021 Week 16 began yesterday, but the first watering of the week was today. I’m keeping up with the flush, starting the 2nd week today. Hopefully I’ll be able to harvest in a few days. My Trio is looking really lovely. Their buds are covered in trichomes that glisten under the lights. They are starting to darken in color in some areas like their mother did. They may take on some pinkish/purple hues before it’s all done. Some of their leaves are turning purple as well. The sugar leaves are somewhat dark, but still green. All three of them are very nice to look at, and their smell is super strong! It’s really nice in my grow room! Yesterday I went out and got some more of those support sticks from the local home store and provided support for all of the branches that needed it. Which was a lot! I got 7 new support sticks and used them all. All of the branches are now supported and flourishing! Today each of my girls received a gallon of properly pH’ed water, and each had a sufficient amount of runoff from which to gather measurements. The process went as follows: C1 & C2 had an initial pH of 6.9, and C3’s initial pH was 6.8. I added .2ml of pH DOWN to each gallon which adjusted the pH to 6.4 for C1, and 6.3 for C2 and C3. TDS going in was 88 ppm for C1, 86 ppm for C2, and 84 ppm for C3. Runoff measurements were a little weird. The runoff pH for C1 was 5.9. The TDS was (at first) 600 ppm. I thought that was an incredible drop from the other day, so I did it again. It was 603 ppm the second time. Ok, moving along nicely! The runoff for C2 was pH - 5.8, and TDS was 1101 ppm. 😳 That’s a lot more than C1. C3 had a pH of 5.6, and TDS of 1212 ppm. Which is even more; so I measured a little more from C1 again, and the 3rd time it measured 736 ppm. 🤔 That seems weird to me, but I’ll keep an eye on it. If it continues to be that low then I will end up harvesting it before the others which won’t be so terrible. I’ll just have to wait and see. The temperature in the tent was 81F, and humidity was 47%. My ladies are looking lovely and growing better than I could have hoped for. This grow has been awesome, but I can’t wait to be done. Happy growing everyone! 27 Oct 2021 Feeding/flushing time again! I was somewhat perplexed the other day when I got the runoff reading for the TDS in C1. It was 500-600 ppm less than C2 & C3 respectively. Since I was having some issues with the TDS meter I thought that IT may be the cause. I made a note to check on it today, and there seems to be no problem with the TDS meter at all. Keep reading for details. My plants are still looking as lovely as I could ever have hoped for! C1 has started showing more color changes than the other 2, and the only thing I can say the difference is, is that I defoliated some of C1’s larger fan leaves last week, and wasn’t able to do the same for the other 2. That is the ONLY thing I can think of that has been different between all 3 plants this entire grow. Regardless, all 3 plants are looking wonderful! Today each of my lovely ladies received a gallon of property pH’ed water with an expected amount of runoff for testing. The preparation went as follows: C1 & C2 had an initial pH of 6.9, and C3 was at 7.0. I added 0.2ml’s of pH DOWN to each gallon which adjusted the pH of all 3 gallons to 6.3. TDS going in for C1 & C2 was 85 ppm, and C3 was 84 ppm. Runoff levels were different for all three plants. C2’s runoff pH was 5.7, and TDS was 1041 ppm. C3’s pH was 5.6, and TDS was 1059 ppm. Last time C1 was significantly lower than the others, and I thought that maybe it was a TDS meter issue. Evidently it wasn’t. C1’s TDS today was 526 ppm! 😳 still much lower than the others, and pretty much ready for harvest. The temperature in the tent was 81F, and humidity was 43%. Although harvest time is much closer, I don’t believe it will be done in time for this month’s grow diary of the month contest. So sad, but that’s life. Happy growing everyone! See you again soon. 29 Oct 2021 Today is the last day of week 16. I was planning on continuing the flush today, but remembered something that I had forgotten about…. I remembered the branch that had broken off of C1 back on October 10th in week 14. She had held on for well over a week in a can of water, but finally her leaves started to droop. I hung it up all by itself in my small tent to dry. Until today that is! I took it outside and trimmed it on my deck. Even outside, in a pleasant breeze, the amazing smell of this branch was easily detected. It’s kind of windy, rainy, and chilly here today, but still …. That sweet blueberry muffin smell was there. Her buds; still covered in the dried, crystallized trichomes were super sticky! I must admit that they are the stickiest buds I have grown to date. I weighed the dry bud to add to the grand total of C1’s harvest later. Then I ground it up and smoked it. All I am going to say is that from my reaction to smoking it; I have decided that no additional flushing is needed. After all, what I smoked today broke right before I started flushing, and I could taste nothing other than what I would hope to taste. So my fellow Growmies; I am ending this week right here. The next report you will see will be the harvest report!! Stay tuned!

Well. First week of flushing done. She looks great. Trichomes are all going cloudy, no Amber's yet though. Should be harvesting her next week. Probably going to re veg and mother her

Trimmed alot of dead leaves of today . Going to run 2 more days then light out. Stacked on a lot of weight this week. Looking forward to finally being able to smoke only a couple of weeks away

SOME SEEDS ARE STARTING TO POP OPEN AFTER 1.5 DAYS SO I WILL PROBABLY BE PUTTING MOST OF THEM IN THE SOIL ON APRIL 23RD👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Hello everyone Fat Banana is doing amazing the hot weather here has given her a extra boost this week. She is filing those buds nicely. Trichomes are everywhere and in big numbers to. And I have given her the first dose off PK13/14 nutrition. I will give her this for the next 2/3 weeks when feeding. Not much more to say then Happy Growing all

SHERBERT QUEEN AUTO / RQS WEEK. #10 OVERALL WEEK #5 FLOWER This week has been a good week for this lady her buds are getting dense and she's smelling good. Stay Growing!! Thank you for taking a look it's much appreciated!! Thank you ROYAL QUEEN SEEDS!! SHERBERT QUEEN AUTO / RQS

Flip to flower next week. Really exited to see how this goes ! Vigorous growth for there age.

**Encontrarás la traducción a español al final de la descripción** From/Desde: 22/03/19 || To/Hasta: 28/03/19 From day/Desde día: 29 || To day/Hasta día: 35 You can find the Money Maker Diary here: ** Podéis encontrar el diario de las Money Maker aquí:** https://growdiaries.com/diaries/25667-gorillamakingmoney-gorilla-vs-money-m -----IMAGES & VIDEOS----- Video 1: Exactly the same video as 2 but accelerated +400% to fix it to 1 minute for instagram. Video 2: 7 days (29~35) TimeLapse, 1 image each 60 secs @ 30 fps Video 9: An overview video not as awesome as it's music 😂💪 Video 10: Myself working on the babies, lowering tops, topping & training. Video 12: Full working on the secondary Gorilla, twisting some branches, topping & training. -----WEEK SUMMARY----- Well, now i'm getting a bit scared as i adventured myself into Photoperiod, high training, full topping... in indoors at once. I feel that plants are going good, but i really don't know what am i doing, and if i'm doing well. Also i don't know how much time should i give them of vegetation stage, because i don't want to eternalize myself with this tent, so i'm planning to leave this upcoming 6th week and maybe the 7th of vegetation, but no more. Anyway they look pretty atm 😻. In video 10 the main-linning Gorilla suffered an accident as i grabbed the main left branch from a weak point and it has broken (sec 39 aprox.) so it has one less node than the right branch. -----WATERING CALENDAR----- 24/03/19 - 1.000 ml with all week nutrients @ 0.9 E.C. PH5.8 *****ESPAÑOL***** -----IMÁGENES & VÍDEOS----- Vídeo 1: TimeLapse, exactamente el mismo vídeo que el 2 pero acelerado a un poco más del 300% para ajustarlo a 1 minuto para Instagram. Vídeo 2: 7 días (29~35) TimeLapse, 1 imagen cada 60 segundos @ 30 fps. Vídeo 9: Un vídeo general no tan increíble como la música de fondo 😂💪. Video 10: Trabajando en las pequeñas, rebajando las alturas, haciendo topping y entrenando. Video 12: Trabajando a pleno en la segunda Gorilla, girando algunas ramas, haciendo toppings y entrenándola. -----SUMARIO SEMANAL----- Bueno, ahora estoy empezando a estar asustado. Me he aventurado a probar con fotodependientes, entrenamiento fuerte y super topping, todo a la vez. Siento que las plantas van bien, pero realmente no se lo que estoy haciendo ni si lo estoy haciendo bien. También tengo dudas sobre cuanto tiempo más dejarlas en estado vegetativo ya que no me quiero eternizar con este armario, por lo que estoy planeando dejar esta sexta semana de crecimiento y quizás una séptima, pero no más. Aun así y con todo, las nenas se ven preciosas 😻. En el vídeo 10 sufro un accidente en la Gorila con main-linning ya que amarré el final del tallo principal izquierdo por un punto débil y este se partió (sec 39 aprox.), por lo que tiene un piso de topping de más en comparación con tallo derecho. -----CALENDARIO DE RIEGO----- 24/03/19 - 1.000 ml con todos los nutrientes semanales @ 0.9 E.C. PH5.8

2018.12.07 - Clone Day 68 - Flowering Day 16 I'm struggling with how to address the significant difference in height between #5 and the rest of them. I much prefer growing from seeds, where I know how to top, manifold, and LST to create an even canopy layer.

So far so good. Frost Banger is showing some purple hues and the Purple Haze is full on developing purple buds. The FBA2504 is my fav in this run shes tall and still growing, looking healthy except she has a lil Phosphorus deficiency at her top leaves but other than that they all are doing good. We are already on day 43 with this run!

🍉💦💧🌊

Les colas commencent a gonflé j'ai enlevé les grosses feuilles pour une meilleure qualité lumineuse. Pas signe de surengraissage(les pointe des feuilles ne sont pas décolorés), plante petite mais compacte avec une odeur d'agrume verte laissons la dans sa course pour la coupe de DuctchPassion@ la suite au prochain épisode.