Likes
Comments
Share
She is a plant with great genetics from BIG Seedbank.. She is verry tall and longed branched but... The buds are getting verry BIG... I needed to support some branches 😉.. Feeding not a lot... hope she goes good untill the end... fingers crossed.. 🙏
Processing
Likes
81
Share
I am pretty excited. 🙂. They are coming along nicely. The ladies arms are getting more and more swollen every day. The stretch has stopped. I have done some more defoliation (can't keep my hands away from the damn scissors. Lol). I will update throughout the week. 😎
Likes
15
Share
@38PLAN
Follow
Abbiamo tagliato a metà 3 piante,farò il raccolto scaglionato,le lascerò ancora per un pò cercando di evitare le cime popcorn,l'odore é fortissimo e la quantità incredibile,fino ad ora la miglior pianta mai fatta,e da tagliare rimane ancora molto....BUON ANNO!!
Likes
5
Share
03.22.23. Start Week 3. Today i started the Low Stress Training on the plants. I first carefully start to bend the plant kinda massaging the plants and making the plants softer and easier to bend down. I then tie the base on one end to keep the plant from snapping, and bend the plant the opposite direction and tie it down. I will continue this daily until flower starts to create a perfect even top canopy. End of week Review. All 3 plants seem to be reacting well to the nutrients and LST they are getting. Also the few leave trimmings seemed to go well with them all. I have officially named the plants. There names are Megan, Lucille, and Alien. Very excited for these plants to start there flowering stage
Likes
56
Share
@TOTEM
Follow
Welcome back! On day 21, since she was growing fast, I decided to top her. I was a bit afraid of doing so with an autoflower, but then I saw @Eurus CBD Crack diary and that actually convinced me. Well, she didn’t even notice the top, and kept growing like crazy, yay! This week I’ll give her 0.25ml/L more of Connoisseur A+B, as well as the usual 0.5ml/L of Voodoo Juice and B-52. Day 25 (20 from sprout): LST on 6 branches + 4 bigger leaves.
Likes
9
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
Comments
Share
Week 6 she’s looking great! Put on a lot of weight in the last week, buds are looking nice and fat. Main colas are big and the bottoms look like nice golf ball sized nugs. Not a veteran so I don’t know for sure but the node spacing is looking pretty good to me. Got a very nice gassy vanilla smell going on and i get hit with it when i open the tent 🤩 Still on Athena bloom for a couple waterings then switching to fade. Next big purchase is a fancy camera lol Drop a follow!
Likes
7
Share
@Krissci
Follow
Bud's everywhere... Nearly ready to begin flush.... 1-2 More feeds of nutrients then begin flush. Day 6 - defoliation on the lower leaves and slot of bending to expose the lower Bud's.. I HATE SMALL NUGS !!!!!! Pointles....so bend or lollipop
Likes
20
Share
@Hashy
Follow
Week 8 Light cycle=12/12 Light Power=180w Extractor controller settings High temp= 24c Low temp= c Temp step=0c High Rh= 50% Low Rh= % Rh step=0% Speed max=10 Speed min=1 Smart controller settings (during lights on). Lights on=10.01-21.59 Radiator on= below 22.0c Radiator off= above 23.0c Dehumidifier on= not in use Dehumidifier off= not in use Smart controller settings (during lights off). Lights off=22.00-10.00 Radiator on= below 18c Radiator off= above 19c Dehumidifier on= not in use Dehumidifier off= not in use VPD aim=0.6-1.4 DLI aim=40-45 EC aim=1.9 PH aim=6.4 Thur 15/2/24 #2 (Day 50)(Day 18 flower) 📋 H=93cm D=19cm DLI=65.0 Hst, remove some side branches. Fri 16/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=bloom nutes. Neutralise=0.1ml/L Silicon=1.0ml/L Calmag=0.75ml/L Terra Bloom=4.0ml/L Sumo Boost=2.0ml/L Roots=0.2ml/L Easy Ph down=0.11ml/L Ec=1.85 PH=6.4/6.6 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L(13.5L) Total volume left=3L Total volume used=10.5L Volume per plant=2.6L (Est) Runoff. Total runoff=1.2L Ec=2.13 PH=6.1/6.3 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 51)(Day 19 flower) 📋 she is starting to show signs of light stress. Lowered light power from 180w to 170w. New DLi=60.0 Sat 17/2/24 #2 (Day 52)(Day 20 flower) 📋 H=94cm D=18cm DLI=62.7 Sun 18/2/24 #2 (Day 53)(Day 21 flower) 📋 Lowered light power again as they are showing a bit of stress from the light. Power was 170w now 160w. I'm going to have to have a think about my next grow, either I stick with this tent and hit the plants hard with light when I flip to flower to keep them small, or try and cram a slightly bigger tent in the space allocated for it. This tent is 61×76×150cm with the option to extend it to 173cm. Mine is configured to the 150cm height, but because its extendable the top 30cm is inaccessible at the best of times let alone when the plants reach a decent height. Extending this tent will be pointless because that's another 23cm of inaccessible space. Besides I only have a max head room for 160cm where the tent is. Mon 19/2/24 #2 (Day 54)(Day 22 flower) 📋 H=96cm D=16cm DLI=62.7 HST Tue 20/2/24 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 Method= automatic Feed=water Neutralise=0.1ml/L Easy Ph down=0.01ml/L Ec=0.2 PH=6.2/6.2 Time start=12.00pm Finish time=13.45pm (11×5 minute runs with 5 minute gaps) Total flow rate=190ml/min Flow rate per plant=47ml/min. Total volume made=13L Total volume left=2.4L Total volume used=10.6L Volume per plant=2.6L (Est) Runoff. Total runoff=1.25L Ec=1.33 PH=6.4/6.4 💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧💧 #2 (Day 55)(Day 23 flower) 📋 Wed 21/2/24 #2 (Day 56)(Day 24 flower) 📋 H=100cm D=12cm DLI=65. She has reached a nightmare hight for this tent and I can't get my camera in there to take any pictures. She is progressing at a decent speed and looking great, she is showing a few signs of heat/Light stress so I'll have to dim the light a little soon. Back soon. Take it easy.
Likes
58
Share
@Coopmc
Follow
Starting week 4 for seeds bearing plant week 5 start for the Pollen maker Balls starting to open and female flowers are ready!! Pollen !!! SVT, SubLIMEinaL, Peyote Gorilla and Royal Gorilla in with SVT pollen doner
Likes
13
Share
@Optico45
Follow
Finally peaked at the roots and they look healthy, all bright white. Flowers forming on all plants. Dark Purple KUSH plants have adjusted and the buds are growing well on those. Added Mammoth P microbes beginning of last week and again in the reservoir change this week. So far so good. Trimmed them all.
Likes
5
Share
@Chubbs
Follow
These girls got lollipopped and a defoliation this week. I think having some more air flow at the pots level they'll get the dryback I'm shooting for. Now they'll also be able to focus all there energy on the top colas. All in all Happy Growing.
Likes
6
Share
This one was Baked in Paris by PerfectTreeSeeds, grown with GreenPlanetNutrients only! Check the other weeks to see the ones with AptusPlantTech! Great zkittles terpz, awesome structure, beautiful colours. So, this is the one I liked the most since day one, love her colours, her structure and her smell, but precisely because of that I was too excited to harvest her that I forgot to take proper photos so I leave the ones of her last days .. Will try to update soon with some pictures of her on the drying screen ahah
Processing
Likes
2
Share
We add the First week on the App but isn't working also i upload here the second week . The 2 Fast 4 BUD'S Strains that we are growing are 4: Zkittlezz Auto Green crack Auto RHINO RYDER Auto Girl's scout cookies Auto And all are looking amazing, we let these girls 12)12 from seed. And we are really impressed for how Fast they Grow, amazing, for our testing , these company is against sweetseeds the fastest for all our sponsors. Also we add TNB Naturals co2enhancer bottles and are Looking to feed the lady's these week. Note: turn always music on our videos and full length videos in our YouTube channel.
Likes
100
Share
@AsNoriu
Follow
Day 50. Oh boy .... Most challenging healthy grow I ever had ... Have loads of things covering each other and it's hard to understand, but they constantly unhappy .... Low temps day and nights, different rate of watering, wind damages, too intense lights, understanding feeding with living soil, too high humidity for best VPD and so on .... Loads of challenges !!!! So I decided to harm them more ;))) In the middle of action I was almost regretting it ... But heavy defoliation, SuperCroping and lolitoping session is DONE !!! All 3 Northern Lights are worst in this run. Smallest plant is still in veg or early preflower. All 3 Green Cracks found strength and power and now at least two plants look very decent !! Alaskan Diesel is my love of this run !!! Amazing strain, super fast, super healthy and productive !!! Hope after all that heavy training my humidity will be back to desired 65 , not 70+. Day 52. Long story - short : I am f@ckingly HAPPY, that I did it, plants grew 7 more cm, colas on some and quantity are INSANE !!! Video tells it all ... Day 56. Even if I'll screw up @Seedsman is amazing house ! They just overgrew my setup, I can't crop 25-20 colas on each plant, so tops are burning a bit and yellowing, not best for photos, but amazing for quantity still !!!! ;)))) For this not to be all fun, today I had two hours without electricity, temps dropped to 13 in the night .... All heaters were off ... Happy Growing !!!
Likes
12
Share
12 weeks of growth, when transplanted into the ground, one of the two bushes gave new shoots, they stretched out but also form flowering ovaries, and the second plant immediately began to form cones, one variety but a different result, let's see how it goes)
Likes
16
Share
@osmrducks
Follow
Day 15: Plants looking healthy as can be! I didn't make a rack for the lights but I got em in. Looks jankie, but I think its gonna work. 🙏 Day 16: Trying to work out kinks in my grow. Since I put the other 2 lights in, I'm now battling the heat and humidity. Switch the fans around. Got the cold air coming in down low. Will feed them in the morning. Day 17: The girls were showing signs of being thirsty this morning for sure! They received their first drain to waste watering. They will be getting some additional nutes on the next feeding (AN B-52, AN Sensizyme, AN CalMag Extra). Day 18: Looking amazing today! I tried my hand at a little LST. Wish the girls luck.!! 🙏 Tomorrow is the official 2 week mark from breaking ground. So, not sure. I've got the humidity finally dialed in at around 50-55% and the temp around 78°. Also gave them another drink as they were already dry about 1.5" down?? Day 19: This is the official 2 week mark. I think I stressed the girls pretty good yesterday, but they look to be recovered today. Should start seeing good growth in the day to follow. Will just be tucking a leaf here and there for a bit. I will being doing a straight water feed next with Great White. Day 20: Nothing new to report other than found 2 leaves that had some yellow mottling. I added Sensizyme, Recharge, and Great White to this feeding. Did not do drain to waste. Just watered the outside perimeter. PPM was 260 at 5.8 ph. Day 21: NO MORE NUTES for these girls! Tips on a couple of em are turning yellow!!! Stupid me. Over watering and giving too many nutes.
Likes
20
Share
I started the flush on Tuesday 4/19. I chopped both plants on Saturday 4/23. The Trichomes are just about perfect in my estimation: > 5% clear, 10% amber, 75% cloudy. This is my first time drying the whole plant (I have always wet trimmed in the past). I read a bunch of good stuff about how hanging the whole plant and dry trimming makes better bud, so I'm giving it a shot. My main concern is possible mold with how tightly compact these plants are. I am keeping the humidity between 50% - 55% right now. I am hoping these plants will be dry enough by next weekend to start trimming and jar curing.