The Grow Awards 2026 🏆
Likes
Comments
Share
@Kinghaze
Follow
Last week of nutrients. I will flush them next week with advanced nutrients flawless finish. There are some big differences in finish time between the plants ,but we will see . Unfortunately i don't have the luxery of having a separate drying tent. So i have to find the sweet spot between the plants.
Likes
13
Share
Hope everyone had a great Christmas!!! We have had some crazy cold weather here the last 4 days and for the first time in 13 years had snow on Christmas day. So with the cold and snow came grow room issues. My grow space is outside and not attached to the house so maintaining a proper temperature and humidity has been a bit on the difficult side. Even with the lights running 24 hours, it's had a few drops down to 19c and the humidity has gone up to 68% a few times. Now luckly I'm still in veg and the humidity isn't a issue yet but the temperature has been making me worried. Going to put togther a heater with its own temperature switch increase it drops below 20c. Did some training over the last week with some LST and FIMing. With the LST every 3nd day I've been adjusting them and pulling the plants back a bit more and more. Since I don't think I'll be able to set up a SCRog net this go around (spent to much for Christmas and wont be able to affordthe PVC tubing) ive got to figure out something else and fast. Plants are getting big and it's going to get hard to bend then properly without braking stuff. Because I was showing some issues with 2 of my plants I started adding a bit of Revive to my res to see if they get better and they have. But because of the cold that's been hitting us my tank has had a hard time staying warm. Even with my 50w tank heater it's been fighting a up hill battle because the area outside the main room where the tank is, has been sitting around 14-17c. So with that the air pump I use to circulate the tank, it is pulling in cold air and thats been fighting the tank heater in getting it up to what I like it at. I tried using my water pump instead of the air pump for circulation and the res went up to 25.6c soooo I would much rather have 19c res then water that could kill my plants. So let's talk about the plants themselves. Both Special Queen plants are doing great but as you can see from the picture, one is doing absolutely amazing. Great growth (understatement) and has bounced back from training like a pro. The other plant is still doing really good when compared to all the other plants in the room but still could be a little bit better. Depending on what I'm going to do for supporting the plants this might be the last week of veg. Well see. So this plant was doing great and then about 2 days ago I started to notice issues. Almost looks like leaf rust or a Ph problem but ive tried my best to keep them correct and I'm hopping that like my Ripper badazz plants that they well just grow out of it. Doing a big clean up today in the room so I'm going to keep my eyes open for any pests just incase that's the issue but fingers crossed it isn't. Well that's everything for now. Happy growing growmies!!!
Likes
22
Share
Very healthy, I spread them on the full growing area now. They ready to bloom. No nutrients so far.
Likes
21
Share
A-Day 81, B&C-Day 77 A- Is already 1/2 way through week 12, she almost all cloudy, with some amber tricomes now. I have started her “flush” just water for two feeds now. I’m going to keep watch, and see when is the right time, no rushing this go around . 🌱😎💨 B- is doing great, fattening up daily. A few more weeks at least, I hope she gets as big as her sister A 😍she got a full strength dose of nutrients twice this week and a water only feed in between. PPM was close to 1000 . C- is thickening up, I have her a slight defoliation and tied her down a bit to spread her branches. She is turning into a beast 🤩she also got 2 full dose feeds, and a water in between. Just keep spinning them around to get the even coverage.
Likes
13
Share
@Lfuego22
Follow
Day 18 veg from clone Water temp 69.6 Ph 5.9 Ppm 724 Ec 1.6 Room temp 66.8 Light temp 74.4 Humid in room 48 Over light 42 Day 19. Full flush. PT 1 Start ppm of RO (filtered/nestle) 146 Ph 7+ Final ppm 880 Ph 5.9/6.0 Temp 70° Room humidity 50% Light 45% Light heat 73.0 Room heat 68/70 depending on if heater on or off
Likes
25
Share
@NewName
Follow
Thick flowers 8p gettin a big top 😛 These plants are not bigger than 30cm, crazy!! 🤩🤩
Likes
4
Share
Added co2 this week finally and the terps coming off this beauty now are unreal pineapple and mango every type of tropical fruit smell you can think of, my mates just chopped one of these and it’s potent it’s like Cali seriously amazing strain probably my favourite upto now
Likes
7
Share
Day 43 12/06/2021- Beginning of week five of flower. She should be done soon, she will also get her final feeding soon. Day 45 12/08/2021- She got her final top dress today from here on out she is on her own all I will do is water with pain water PH to 6.2-6.8 when dry. Day 47 12/10/2021- She is coming along nicely. Very frosty wish she wasn't a auto so I could of clone her for sure. Today she got a nice treat as it rain in my hometown and that's the water she got. Hoping she is ready by the end of the year. I know she looks funny but she was never topped either. Day 49 12/12/2021- End of the week, nothing new.
Likes
16
Share
Started last 2 days to add a little of Fish Mix (1/2 or the recommendation in the BioBizz Feeding Schedule), I plan to stop with the Root Juice from now on and only continue with Fish Mix and Bio Heaven for the time being. The 2 bottom leaves, they are showing some signs/spots on the leaves (Last Two Pictures). All the others (and newer ones) looks healthy and no sign of these spots. I think it was just light burn on the wet leaves (keeping an eye on it anyway) Using Photone APP, the PPFD is around 250-300 now. It was around 150-200 in the previous weeks. Additional Information: I'm Using Airpots. 2 Static Fans 1 150mm Exhaust Fan Water PH is around 7, but being organic nutrients I shouldn't be so worried. Update on Seed #2: Never grew (break the surface), so I'm giving up on it (its still in the tent, but zero hopes). So this is just a 1 plant Diary from now on.
Processing
Likes
24
Share
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Likes
6
Share
@S3phwea
Follow
Hoping these girls start to bulk up soon. This is all organic- just being fed with water, glucose, and the Gaia Green soil bloom nutrient top dressings every other week. Goal is to see what I can do with bare minimum and then press the yields with nutrient feedings in the future. Anyone with organic growing experience - these look normal size for where we are at in flower? I know we have a month or so to go but the roots seem to be pretty compacted at this point in 5 gallons pots. I think I’d go to 3 - 10 gallon fabric pots for next grow. Let me know what works best for you.
Likes
13
Share
The Ztrawberriez Auto is very resistant has a great sweet strawberry smell throughout the garden. As you can easily see from my grow question, I was initially afraid for the plants due to the high temperature in the greenhouse (as soon as the sun shone ~40 degrees). It turned out that the plant seemed to like it and rewarded me with beautiful buds with purple tips. Growdiaries won't let me delete the question otherwise this would have happened long ago... She finished very quickly and took just 70 days from seed to harvest. All this confirms that fastbuds is the right address for autoflowers. I'm already looking forward to the next run. Make sure to follow out instgram channel Krautbauern420
Likes
13
Share
Some of you may have wondered: Why do I use CO2 at average 950 ppfd μmol/m2/s (moral flow)? The answer is quite simple. Because of lack of space in some regions of my cultivation area, I simply cannot keep the ideal distance to my Sanlight high-performance lamp, due to some height growth of various strains. And so some of the main colas have ppfd values of 1250 μmol/m2/s and even more... So this is how I manage to achieve and compensate for such high radiation levels even with a CO 2 balance. And I have to say, my strategy to avoid various light stress symptoms works just fabulously. In combination with CO 2 implementation, my babies are simply unbeatably insensitive to light. Thats it! Beginning of 3rd week flowering: Again feeding my babies by 36 hours fermented potions of Bio Tabs Kompost Tea PK-Booster (15 g pro Liter) and added: 5ml Orgatrex/Liter 1 Spoon of Bactrex 1 Spoon of Mycotrex 1 Spoon of Mycco-Vital 1 Spoon of Dynomyco A little tip for those who are interested in small modifications that have a big difference or influence - on the result - effect - beauty - health - taste! Before adding microorganisms or beneficial bacteria or Mycorrizae and Trichodermas, please use oxygen-saturated water. On the one hand, unwanted chlorine gases evaporate and the small world of the microbiome becomes even faster and more rewarding in compost tea to sprout. Last but not least for this week, I would like to introduce my reasons, why I prefer growing biologically and sustainably. First of all, it’s something which suits very well in these times/days we are living now. Sustainability is a big need and task for our planet. 🌎 Nature means life. Our home, the air we breathe and everything that surrounds us. Not just today. Hopefully tomorrow as well. Maybe I'm starting to protect our environment on a small scale, but maybe I can also make a big difference at all. If you change the way you look at things, the things you look at change... I thought about what’s the difference, between Mineral Feeding and Super Soil Feeding. It’s very easy. Biologically Growing is a similar process than the natural soil activities out there in the lap of nature’s. So plants has to work and interact with the microorganisms and microbiomic communities in the soil. So the plants will never get lazy like the lazy ones of mineral feeding growers. If you grow biologically, you will feed the soil first and the microorganisms will support every parameter next to your plant conditions. And that will generate an unbelievable spectrum of Terpenes and Trichomes you will never forget. It’s the same comparison, when you daily visit McDonalds and you eat only fast food. How does your body and mind react on this shit for money?!?! May I invite you to think about it… See you next week dear Growmies! Have a nice Weekend and take care… Peace out! Addendum for Day 53: At the moment we unfortunately have another winter onset here in Germany. This means that I am forced to take additional heating measures due to structural facts in order to be able to keep the temperatures constant. After all, just tonight the thermometer climbs again to -1 degree Celsius. In addition, my exhaust air system runs out of my bedroom terrace and I therefore grow winter and summer with the patio door open. Well, sometimes I experience real weather-related challenges. But all in all, no problem... "Where there's a will, there's a way." Addendum to pouring out the fermented PK tea: I always administer half a liter of lukewarm aerated water with 3.5 ml of cannazyme per liter to each plant. This means that the "root machine" is not supplied with supplies unprepared and the nutrient solution can thus also be better distributed in the soil. Since I also work with cloth shoes, I spray them evenly moistened everywhere with water that is also warm before pouring them out from the outside. This has the advantage that the moisture stays where it should: in the pot! ... I did the math today ;-) We are still in week 7 until this Friday. And week 8 starts on Friday! OMG... still so much time yeahh! Today my Fast Buds Sour Jealousy and Sweet Seeds Big Devil and Dark Devil Automatics arrived. I'm looking forward to it. This time Fast Buds next Time Sweet Seeds. Love them too. Very beautiful genetics. Today a review video of the beginning of week 3. At the time of the pictures, I had minor signs of nitrogen excess. (Light peaks first at the crown of the roof and then slightly continuing to the middle section.) I then painstakingly racked my brains as to why this could be. I found that very slight dry spots had formed and therefore the root found small accumulations of nitrogen that caused its problems. But then, when I carefully homogeneously checked the moisture content in the substrate, the problem evaporated again. However, they had not shown any loss of growth rate during this time. Nevertheless, they developed as expected. They Strawnanas had no problem with that. In the end, I always have a hard time killing them. But I guess that's the way things go. We live and die. We come and go. But it's not there yet. ;-) Tomorrow is day 56. Tomorrow’s updating day! Can't wait to see their progress. Have a good time and see you tomorrow… 🏽🕊️ 🏽 ☮️🕊️
Likes
20
Share
Ze is zo mooi. Ik ben echt tevreden met haar. We hebben mooi weer dus heb haar uit de tent gehaald en in de volle zon geplaatst. Ik denk dat ze nog anderhalve week te gaan heeft. Nog 2 keer voedingsstoffen meegeven en daarna alleen water. Wordt vervolgd...
Likes
6
Share
Добавил СО2 и поливаю удобрениями
Processing
Likes
18
Share
Esta semana apesar de tener temp Máxima de 28... se va recuperando bien de las podas, el led de TodoGrowled funciona perfectamente para sus 55w farmers!🍁
Likes
2
Share
Likes
Comments
Share
So everything took off in flower, I was super harsh with the defoliating which initially I regretted, but was surprised with how they packed out during the following weeks. In general it's impressive how hardy these plants are. Even the outdoor grows yielded some quality. Add some more nuets (overdrive and carbo load), before flushing about 14 days before harvest, next time I'll do this earlier and really the Runtz could have gone another week but my drying needs to happen in the same space as my growing for now. Apologies for the quality of image, I'm just using my phone and some bits I have to document, I collect records too, so expect weird noises lol. Build a rotating plat from a lazt susan I found, has been the best piece of kit added this season.
Likes
10
Share
Start of week 6! Glueberry OG is growing strong however she's also getting hungrier and I made feed her an extra liter part way through this week. She's incredibly sticky, just like glue lol! Bud sites are looking good and development is strong.