The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
@BigHorn
Follow
Growth has been steady I'm going to start budding coming week 7. I think I'm going to run out of tent room might be a lil late but it is what it is.
Likes
4
Share
@GeminiCQC
Follow
I'm expecting at least another week on the hubba bubba as it's getting nice and thick, and I haven't noticed any new pistols form in a few days. The ABxRKO is still trucking, and it makes me excited for the next drop that tree1four did. It smells heavy on the burger side, but not super meaty. It has a slightly sweet gassy meaty smell to it.
Likes
74
Share
@Ferenc
Follow
Day 44, 2nd of November 2021: Hi there. So the plants had 2 days of darkness before the lamp was on again and from today it is 12/12. Big change also is the power: It is now on full power which is 240W so 100% capacity. Ventilation is different as well under the 12 hours period when the lamp is on it switches 1 hours on and after one hour off mostly to keep the temperature and of course because of fresh air flow. When the lamp is off it switches on in every 2 hours for 15 min at the same time with the extraction fan. The extraction fan is on 12 hours when the lamp is, and then it switches on in every 2 hours for 30 min. That's all a bit more water for them from today also. Humidity quite the same, temperature as well. Fertilization changed, the BioBizz family raised up to be 2ml/L each so it is like 2ml/L of BioGrow, 2ml/L of BioBloom, 2ml/L of TopMax... see the ratio above. Previously it was just 1ml per liter each. The schedule of the fertilization has not changed happnes 2x a week except epsom salt just 1x a week. Not much to mention as it just started.
Likes
6
Share
11/03 - 2x2 (6 clones) 4x4 (11 clones) - 4x4 trimmed and ready for flip this week - 2x2 being trimmed this week and flipped same time as the 4x4 - Only clean water and carbo flush feeds for this week. Drip line emitter added to the 2x2 with a 5 gallon res - each pot has 2 lines.
Likes
Comments
Share
5 semanas y 4 días de flora 🍹
Likes
25
Share
week intel: its time to harvest top buds! because my base nutrients and one of boosters was salt based, i'll do flushing this week to get some relieve to plants in the last days stresses : flushing Drought stress via watering only one time with flushing this week feeding: day 1 : i flushed them with Advanced Nutrients Flawless finish and adjusted ph day 3 : no more feeding from now on day 5 : no more feeding from now on guide of the week : i harvest in 2 parts : first i harvest top of the branches and will let the lower buds to ripe another week then ill harvest the second wave. its crucial to get uniformed buds in terms of quality that you let the lower buds to get some extra air and especially light! then the pop corn buds quality will reach the top buds. my dry and cure style is this: 3 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 3 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. im happy as hell with this harvest :D.
Likes
1
Share
Absolutely blown away by the new 2025 setup, prev ran 3 tents 😂, switched to AC Ifinity 2,4 x 1,2 single tent, 3 x 150 or 6“ fans. Fans all port outside, 2 exhaust with yet uncoupled carbon filters, 1 inlet with pollen filter. 6-7 air push fans (not all yet on 😂). SpiderFarmer 16L humidifier, inkbird RH control, inkbird heat control, heater, trotek dehumidifier (12L) with drain line and reservoir. Blumat system with RO fed 20L water butt, each pot with 3 long ceramic blumats. Data logger from SensorPush including WiFi hub and 4 sensors. One in cellar room (lung room), one above each plant canopy. Setup logger n sensors and track VPD. System running itself
Likes
2
Share
@Ninjabuds
Follow
Bubble og I still have 4 of these guys going. A few of them are still dark green and pretty decent growers they have thiner leaves. I'm sure a few of these will be on the chopping block later down a few of them just have crappy start growth and they need the humidity at 75% or above 100% the time with the light lower than normal or they start to shrivel up. That's not all of them just a couple. Also I am only going to flower 8 plants out if the 12 seedling and I have 5 strains going so can't have half my plants bubble og (wish I had room to grow the full 12 plants at a time) It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.
Likes
16
Share
@GYOweed
Follow
I got candy stripes and slight N deficiency. Gonna give it extra aminos and tiny amount urea for N. They are drinking a lot so i up the feed.
Likes
17
Share
Hi guys , Miss Blue keeps on flowering , she looks very nice, buds are not super dense but neither fluffy for sure, they're stretched out pretty good Don't know if she will stay alive for another week I'm cutting off a tester bud today.
Processing
Likes
Comments
Share
@HVACBOY88
Follow
Beautiful plant I love this one, it was a easy grow
Likes
3
Share
@PlantMike
Follow
A little late for the weekly update as life got in the way but my girl purple Alaskan is doing awesome! Great root formation down into the reservoir now, I upped the EC to 1.4 and changed the reservoir water completely this week. I have been getting some pH drift but I think it's from the bucket I'm using so I have been adjusting to 5.8 as needed. I added the scrog net today as I know she's gonna be growing like crazy now!
Likes
31
Share
@Ghost2022
Follow
Done a load of defoliation this week. Buds are looking strong. Im thinking just another week or 2 before we harvest.
Likes
5
Share
@Ninefold
Follow
Same as week 15, missing a lot of pictures in the timelapse :(. I was starting to see a decent amount of amber, and unfortunately a few bananas seemed to start growing as well, so it was time to chop.
Likes
27
Share
@Dunk_Junk
Follow
Wow she looks gorgeous this week! A proper mini weed plant 😂 😍
Likes
6
Share
@Moss420
Follow
Run-off got pretty high on the plants in the main tent when I tested it this week (2300ppm) so I flushed the plants down to around 900 over a few water events with half-strength nutes (~450). I think this, plus (mainly) the plants being too close to the LED caused them to throw some foxtails - particularly the middle plant (although I still think that spindly shit is also partly due to the bag seed pheno). Noob mistake on my end and I didn't realize until it was too late. Now the light is turned down and the run-off is back in a good range. It got high because my auto-watering halos were mostly running off the pots and not sinking in - this is because I filled the pots to the brim with coco (another noob mistake). Looks like I'm hand watering until harvest :) Big Mumma in the blurple tent on the other hand is still killing it.. Apologies for having to upload videos of the microscope - too hard to hold it still and press the button for photos lol.
Likes
1
Share
@VTR90
Follow
Looking well so far. Will update properly when I have more time