Hey guys! Another update! 😃 This week is going to be the last one that I feed the plants and after that I'm going to just flush them for just one week. I took photos during the middle of the week just to see how trichomes were developing and there are more ambar! I want the top colas to be about 50% ambar and 50% cloudy while the ones below 30% ambar and 70% cloudy and I think I'll be able to reach that with ease. Besides that this week was relaxing, no big issues! And I've been removing more fan leaves so when the right moment arrive it'll be easier to clean the plant! And that way I can get some extra development in lower colas. The smell is strong now compared to other weeks (it's been getting stronger every week!) 😲 PD: The question is still up! In case anyone knows what could've happened 😱 Thanks for reading! 👋

Learned a lot from this grow and am very happy with the results. Pulled 2.8 Oz and 1.1 Oz of trim/popcorn buds in a one gallon pot. Definitely wont be doing that again, but had a lot of fun throughout the entire process. Going to be starting another grow soon! Very excited for that.

So we are in the middle of week 10 and I feel pretty comfortable feeding them now, pretty much the same until next week when I give more Top Max. I've seen much more explosive growth on other diaries but I have to say I'm pretty proud so far for my first attempt. Staring at those fresh furry little balls of life is surreal, getting to this point is great, but it's far from over. So I kept the same feeding this week, still adding the Great White with mycorrhizae (and like 40+ other microbes) once a week as it says per directions. The BioBizz products are easy to use and hold up well, so I'm feeling better about going with them even though I had some issues at the beginning (all my fault most likely). I can dial in the feeding mixture PPM now first try to where I want it, so far 700ppm of a gallon every 2 days has been working out. I feel like at the start I was over watering because people say water everyday in coco, well that seems to be for the coco bricks. I am using FoxFarm Bush Doctor Coco Loco (long ass title just for some coco coir) with additional perlite and it has a lot more holding capacity than just normal bricked coco coir. For checking on when it needs water I still use the method of digging into the topsoil an inch and weighing the pots by hand. Also I've noticed if they are pretty tired looking after lights on then I'll water. Like everyone said, consistent fertigation has been the hardest part as a beginner. First week I'm posting a video, the fan can't oscillate so I turn it to the right, left, and keep it center as well as raise and lower it so there is decent airflow. I wouldn't say it's optimal but it works for now. I've raised the lights about 3 inches just so the top colas don't get burnt, I've also found the sweet spot on the potentiometer (power knob) where I can get maximum power without raising the temperature above 77f, which it quickly goes above 80f if I exceed it. I've done minor defoliation before each feeding (so like every 2 or 3 days), mostly just clearing the leaves from above while keeping the important sugar leaves and some fan leaves, even though most the large fan leaves have long died/turned. If you watch the first video I've posted you'll notice an injury on her, unfortunately I didn' I feel like I've failed on the C99 X Blueberry Auto, in fact I took it out of the title. I definitely kept it in nutrient lock even after repeated flushings, it seems to have grown a little and even looks like it's accepted its new life as a stunted sideshow geek never thinking of being the in the spotlight under my grow tent. On the plus side, the two normal Desert Lemon photo's look great, even if one is starting to look leggy. They haven't shown their sexes but it looks like they soon will, because frankly I don't have enough room and would like the leggy one to be gone. The two other shortest plants looks nice and green, shortest being the Black Sugar photo that I did some minor LST with tent stakes - and the very beautiful Gelat.OG photo that is so symmetrical it makes me want to put her in the spotlight (aka position 1 which I give most room/light priority too). Okay so that's it for this week folks, thanks for checking in and please comment or critique on my first grow! Any questions also welcome. -AthanasGrow

RQS Titan F1 week 5 Hello friends and followers, 2/25 This has been an exciting week. My Titan girls started flower 🌼. T3 in the 3-gallon air pot is larger at 6.5 inches. Last week I noticed her new growth was getting long and thin. A sure sign the pistils will emerge in a day or two. T3 started flower 🌼on 2/25. 2/26 Surprise surprise, T3 stretched an inch overnight and T2 about a.5 inch. That stretch meant I had a busy plant workday ahead. First, I defoliated T3 since I could see what I had to work with. Then because I’ve been following @yan402 on his Titan grow, I said I was going to top her. He said its ok if done correctly and at the right time. Well, fingers crossed 🤞, I hope it was not too late or cut in yhe wrong place since T3 was already in flower. Her short (.75-1” long) stems are so close to the stem, it was difficult getting the tie down pins placed. With T2’s stretches her tippy top is just peeking above the copper pot rim. She is towering 😅 at 2.5 inches. T2 was defoliated on 2/26 as well. Her defoliation pictures above show how many I was able to trim off 7 and the leaf relative size. T2’s largest leaf is the size of a quarter and the smallest set I cut off, about the size of a penny. I keep supplementing and folar spraying with Cal-mag but the internodal chlorosis is still visible. I think Teapot gal (T2) has a copper excess.  Slowed Growth,  Fewer branches  Internodal Chlorosis  Stumpy roots (I won’t see this until I harvest and reveal the root ball) Given these symptoms of copper excess, and that RQS Titan are F1 hybrids and should be stable, I believe the height and the health differences are attributable to the copper wire teapot. They are in the same soil, same tent environment, same nutrient solution, same light, same everything. As I stated in previous discourse, I expected the overall plant to be smaller than T3 simply based on the pot size but did not expect to see such size differences so early, not to mention the nutrient issues. How I wonder? The copper wire is separated from the plant and soil by coco liner (which should be neutral, then coffee filters because I thought the soil would was out). Then the soil and plant. T2 is towering at 2.5 inches and started flower on 2/29. I expected a delay in her flowering time (4 days after T3) since she was transplanted to the teapot when T1 failed to thrive (maybe also the teapot cause?). Any time you train your plants, the stress causes delays in flowering then harvest. I defoliated T2 on 3/1 day 30. The pictures after defoliation show the tight node structure with 3 or 4 nodes crammed in only 1.5 inches of the main stem. Sheesh. So, as we enter March, we are off and growing buds. RQS says harvest 70-75 days or 40-45 days of flower. My calculations – harvest will be April 13-18. Be sure to come for my tea

Grow diaries is cool but it kinda sucks.

05/30 - (C) - As we closer to harvest all 8 ladies are running at full capacity with 0 issues - I will be increasing their nute feeds to 3 times a day and will be using more phosphate, potassium and Cane Molasses on the heavy feeds and Silica, Flower fuel, kelp and bloom for supplement feeds. The aroma from these girls is amazing, they have balanced notes of citrus, lavender and earthy notes. Follow my IG:Greenphoenix6262 for more content😎😎😎 *Disclosure* I will no longer be using the identifiers (M) or (C) to designate submission titles since the mother has been cut down everything moving forward will be for the clones* 06/03 - The babies are doing great, almost ready for harvest - I began a frozen water feed program 2 weeks ago and since then I have seen a definite increase in trichome production and cola structure - My feed system is a 2 days process consisting of tea blend for 24hrs and then from fridge to freezer for another 24 hours then feeding the plants while the nutrient feed is about 32-35 degrees (Right as the solution begins to create thin layers of ice). This cycle is repeated every 4 days with a clean water feed in between - For the 8 - 1 gallon clones I am processing about 3 gallons of nutrient feed. So far so good. 😎😎😎😎😎😎😎😎 06/06 - All the babies are rocking out accordingly - There are o signs of any deficiencies throughout all 8 clones - I will begin the pre-harvest process next week - In the meantime they will be on the regular program and frozen water feed schedule as stated on the previous update. The entry will close out this week.

Buds getting bigger..

Ok so this week I did a defoliation and a tigh down too the netting , I really was not planning on doing such a big defoliation but the leafs became thick and dense and there was almost no light penitration down too the lower branches of the plant , so she is opened right up now and the humidity and temperature has dropped loads and the air is moving alot better around the leaves and branches , I will not take anything more off her now , I have also added Cal mag too the nutrients for this week only , she is well into pre flower now but the stretch has not yet started so I figured it's no or never too defoliate and tigh them down , I am very happy with them so far and being new too all this it's all very exciting , Thanks for looking :)

.

The week started with spider mites. I saw them on the frosted guava and decided to take all of my plants outside to separate them a little even if the temperatures dropped under 10 degrees Celsius. Also I found a cockchafer in the room which had obviously time to spread his eggs. After I did this, the amount of spider mites reduced. I ordered some predatory mites and nematodes which I will use as soon as the will arrive. 11.06 I watered the plants with 150+150+150 ml pure water. It’s the last bottled water. From here the plants will get only tap water. 14.06 released the nematodes with around 1-1,2L for each plant. 15.06 released the predatory mites on a wet kitchen paper towel 16.06 LST Frosted Guava

This grow was so amazing!! The purple punch’s came out super sticky dense nugs, super frosty , an a huge smell of blueberry muffins! Super fun grow along with the Forbiddin Runtz definitely one of the sweetest berry smelling strains of ever grown, highly recommend everyone to try out the purple punch’s, you will be highly satisfied!! Stay tuned for next grow!!

Changed a couple things up with the nutes after noticing some cal/mag. def... Everything is looking amazing. Pre flower has officially begun. Looking to get some Liquid KB in here pretty soon too. Starting to stink insanely bad (but great

Missed last weeks update. Been very busy with family stuff. Will be my last week as a vegetative update. Girl Scout cookies dwc is the only plant not in flower. Tent is on auto. Just trying to keep up on water. Lemon haze #1 alone drinks about 3/4 of a gallon a day. Installed my r/o system last week on Friday. Will be a big help. I went through 26 jugs of store bought distilled water last week. Terrible, never again. Lemon haze #3 has such a strong skunky, lemony smell at such an early phase. It’s a shorter stockier pheno. Lemon haze #1 and 2 share the same traits. I just hope lemon haze #2 shows out like #1 has. Wow. I trained her well. Like 14-16 colas on top. Really excited to see how gorilla cookies does. Giving her what she needs to perform and give me that high thc content. It’s already sticky as hell in the first week of flower and what a stretcher. Stems look like celery stalks. Tent is full for sure. All looks well. Temps and humidity on auto and rocking. Deal of the century on that stand alone ac unit. 600$ brand new, I got it for 100$ only used for a few months. Two soil grows are looking great as well. 1 each Girl Scout cookies and white widow autos in 4 gallon fabric pots. Half happy frog and half ocean forest with perlite added. Pretty much week 4 on those and I haven’t started feeding at all, just r/o water ph’d to 6. Both started flower within the last few days. Thanks for looking. Happy growing to all out there🤙

Amazing experience with the Mix Pack, I will try it again next summer for sure. Love the variety.

Dear Growers , Over the next weeks, we’re excited to share a very special project with you: Sensi Seeds Berliner Automatic 2025 Release With dedication, knowledge, and hands-on practice, we’ll guide you step by step through the journey—watch with us as growth, development, and small wonders unfold before your eyes. Whether you're a beginner or an expert, you are warmly invited to join, ask questions, and share your own experiences along the way! Project Setup & Conditions: • Brand/Manufacturer: Sensi Seeds • Tent: 120cmx60cmx80cm • Light: 2x 200 Watt Full Spectrum • Humidity: 45% • Soil: Narcos Organix Mix • Nutrients: Narcos Products • pH Value: 5.8 A Special Thanks To Sensi Seeds for the amazing collaboration, trust, and generous support in making this project possible. Your contribution is truly appreciated! Congratulations on Your Own Projects! We celebrate your growth, your creativity, and the passion you bring to the table. It’s truly inspiring to witness at Each visit . Stay curious and keep up Growing —we look forward to welcoming you back for the next chapter soon!

Giorno 7 taglio della ragazza andato liscio😉

Aggiorniamo prima il diario di questa settimana datosi che il weekend sarò in Svizzera...ormai come ogni anno le dutchfemseeds autofiorenti in outdoor biologico sono una soddisfazione immensa,crescono rapide e resistono agli afidi, hanno iniziato a riempirsi di infiorescenze resinose e profumate e colorate. Giorno dopo giorno sembrano migliorare gradualmente e fino ad adesso promettono grandi soddisfazioni perché ormai hanno una struttura perfetta, molto diramate e molte di loro superano già il metro di altezza! Forza Dutchfemseeds autofiorenti in Italia! Un abbraccio a tutti

She needs a Little Bit more time I Feed her a week longer until end of the week She is a monster