The Grow Awards 2026 🏆
Likes
Comments
Share
Week 14 and it will be the last week for Tamara. Maybe she could live one or two longer, but my vacations starts in 10 days …and at the pic‘s you see …Tamara is in my eyes ready to Harvest… thanks for 98 days growing with you 💚
Likes
4
Share
Week 5 for Amnesia Zkittlez by fastbuds, Has blasted straight into making pre flowers for the last week, shes gotten a little bit extra stretch. Because of her height i will be moving her outdoors with the rest of the flowering autos😎 Shes a little skinny for my liking but lets see how she starts to stack up.
Likes
10
Share
Today I harvested after about 24 hours with lights turned on. The smell is strong lemon with a hint of mint :) I cant wait to taste her when its dry, and in my opinion it smells and looks good :) Had some problems with temperature, but with some gear improvements I think I got the right solution for it for next time. As this is my first try doing this im pretty happy, but ofcourse there is room for improvements :) Thanks to everyone for checking in on my diary and the likes! :) Happy growing and peace 🌲✌️ Total dry weight - 338grams 🌲
Processing
Likes
4
Share
Likes
24
Share
Another great week for the Apple Betty girls. I have not seen a single deficiency, other than the odd yellowed or withered leaf under the canopy, typically due to lack of light. I will come through soon and do a defoliation of both tents to allow for more light to penetrate, and perhaps get a good push for some girthy colas 😋. I have lowered the temps a bit in the tents by controlling my lung room temps, and they are maxing out at 77 degrees and hitting a night time cool of about 70. I have also lowered the humidity to hover between 47 and 52 %. Hopefully will start to get some nice colours as they finish. As I mentioned before, when I water is when I like to get under the canopy and check the stems and leaves for anything that shouldn’t be… and typically once a week after watering I’ll wipe down the tent and sanitize any surface I can. There is no reason to get lazy, that’s how you get Pests, Mold, and PM. Happy Gardening 🇨🇦👊❤️
Likes
15
Share
4/23/19 Start of a new week, Day 50. Watered with plain water. 4/24/19 Fed today in cycle with all the plants. 4/25/19 Today is dry day, shes looking beautiful starting to thicken up a bit. 4/26/19 Watered today. 4/27/19 feeding day. 4/29/19 End of the week.
Likes
25
Share
@Rob691
Follow
Let's go for this session. Long time I wanted to grow Desfran seeds. First because it's almost 100% sativa, and it definitely gets my preference. Second, because it grows fast and high... if everything goes ok ! Germination day 5 : 3/3 Desfran Germination day 12 : The litle girls growing gently. The second pair of leaves is coming, and I thing I'll turn into "week 1" on saturday with their first repotting.
Likes
8
Share
@phobic94
Follow
This week I started feeding my plant with an ec between 0.6-0.8. I also lowered my lamp so they get more light and I topped the plants and started lst.
Likes
9
Share
So after the hailstorm last week, one of my colas were broken. I taped it together and used wire ties to hold it together and it has survived. It continued to grow an inch and is flowering! I thought for sure I had lost this cola. I also used the "question" forum here on grow diaries regarding my broken cola and like the responses I received. We have had some very cool nights and warm days but my Skunk has continued to thrive. The one thing I think is very interesting to notice is how crooked the buds look on this plant. Is it because I grew two colas or because of the trauma from a broken cola?? I have no idea but time will tell. Please like and comment and come back!
Likes
3
Share
@sellem
Follow
Week 3 is plagued by heat, as am i. Was on work trip during week 2 - 3, SO did some work on her, she did fine, Plant did good as well. As noted in the beginning of the diary, i will continuosly remove Fan Leaves of the Main stem throughout Veg, Defoliate a lot and later maybe pull out the scrog. Transplanted on the one day i was home at Day 16, from 3L Plastic Pot to 20L Airpot, but my GOD was she already rooted, not bound, but already some ring roots. Watered her in until some runoff after a Watering by SO on Day 14. Day 14 was 0.8L 5.8 PH 1ml/L Power Roots and 2.5ml/L Terra Grow. Also First Defoliation. Day 16 was Transplant, Watered her in with 3L, 5.9PH, 1ml/L Power Roots and 0.5ml/L Terra Grow, and a bunch of Great White Mycorhizzae sprinkled around the rootball. 20L is also filled with Plagron Terra Lightmix, Rice Husks, and a dash of limestone. Rest of the week went fine, albeit very hot. Shes pulling through though!
Likes
144
Share
@DevilsBud
Follow
FLOWERING IS UPON US for all of the strains I wanted to let the 2 purple berry Kush veg for another week but forgot to put them under the TS-1000 but hopefully there still gone grow fine it is experiment achter all. Have made the switch for 12/12 couple day's ago and i see them all developing 😍 hopefully by the end of next week it will get interesting 👌🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
68
Share
week 5.. Use a portable air conditioner, add a co2 bag to under the light because use heat to melt the gas inside. Co2 weighs more than air, it will be fall down below. {Activities} (Day 29) Use the nutrients. (Day 30) Turn on a portable air conditioner (Day 31) Watered (Day 32) n/a (Day 33) Add a co2 bag and watered (Day 34) n/a (Day 35) Watered (Hope you like and enjoy my diary) Thank you so much for checking out my grows. Feel free to leave a comment, push the like or give the follow.
Likes
3
Share
This is the only picture I have of week 4 but all the girls are looking good I'm starting to see signs of pre-flower I started to low stress train them during week 3 I'm pretty much doing nothing but watering the soil is full of the nutrients she need the light is that a good distance I currently have them at 500 par
Likes
8
Share
She’s looking and smelling amazing so far! Buds are packing on some weight and I swear everyday there’s more and more tricombs, so excited to see how she turns out :) she currently has some yellowing on the inner leaves and I’ve came to the conclusion that it’s due to underfeeding so I’ve given her a little bit more nutrients than I was prior, couple extra tablespoons total.
Likes
10
Share
NOV 12 - DAY 65 - I just FLUSHED her today with SLEDGEHAMMER NOV 17 - DAY 70 - LST to get more fatness on buds, we'll see how it helps
Likes
11
Share
🤙🏻Todo ok! Las hice una defoliación,en esta semana aplicaré la tercera y ultima dosis via riego de Delta9. 🚀 •Preflorando super.
Likes
34
Share
Stretched vigorously once she started to transition to flower. Developed potency early in flower! She was LST'd weekly, starting week 2. She was also gently lolipopped a few times, to maintain growth towards 5-6 nodes only.
Likes
16
Share
Struggled with possibly a calcium and magnesium deficiency on #4. Had to remove some damaged leaves and now have separated it to her own reservoir. Has not stunt her growth, she is bout 5 inches taller atm then her sisters. Flow has been a struggle, if I was do one thing different is go with a 1" drain system instead of the 1/2" it presently has. Started with a drip, yet due to clogs and wanting a faster circulation, I changed to a steady flow over the clay. Presently #1 - #3 are on one reservoir and #4 on its own reservoir (In the video above shows #4). It's been a matter of adjusting the output flow and tubing size to get maximum flow without backing up the drain system.