Likes
Comments
Share
The growth exploded last week, I just have no words on how beauty this is... On the other hand Im flipping officially tomorrow 🏾
Processing
Likes
27
Share
@CannaBury
Follow
Since boosting the bloom nutrients, Bud are gaining size. Added second light to expose lower buds to more light. Keeping temping below 80 was an issue adding second light but also adding more exhaust fans to tent. Plant seems to be only a couple weeks away from harvest. Will start to flush next week for 1-2 weeks.
Processing
Likes
3
Share
Likes
3
Share
Likes
18
Share
Not doing much right now other than waiting for harvest. Colas keep getting fatter and fatter.
Likes
18
Share
@EaRtH
Follow
31.10. - Finally entering the flower stage, really excited about my first auto yield. Adjusted and added a few new ties on the biggest one. Removed ties from middle one to let her stretch out a bit. Watered. 2.10. - Added one more ml/l of Bio Bloom to the mix. I can already see some sugar one the leaves and many new bud sites. Watered. 6.10. - Just wow. All three plants are showing nice progress. The smallest one, which was stunted by overwatering in seedling stage shot out new branches and I'm not sure if it's good in almost 7th week. Plucked out few leaves on all three to expose the bud sites. 31.10. - 6.11.2023
Likes
5
Share
Both seeds were planted on the same day, however, one is growing faster which leaves me to assume that's a male which I am very much happy for…time will tell.
Likes
9
Share
03.01.2026 – BT62 Es ist soweit: Die erste Pflanze wird geköpft. Gleichzeitig war sie auch die schwierigste von allen drei, dennoch bin ich mit dem Ergebnis zufrieden. Das Ganze wird nun mit der DryRocket getrocknet. Größere Sonnensegel wurden entfernt, zudem wurde darauf geachtet, dass sich möglichst wenige Buds oder Blätter berühren. Ich bin auf jeden Fall sehr gespannt, was das Teil kann und ob es für mich zukünftig eine Alternative zum Trocknen darstellt. Ich halte euch natürlich auf dem Laufenden. Des Weiteren möchte ich mich bei Shogun, DrainMaster und DryRocket für die Möglichkeit bedanken, ihre Produkte testen zu dürfen – das ist natürlich nicht selbstverständlich! Hier die Links zu den folgenden Brands: https://drain-master.de/ https://www.shogunfertilisers.com/de/ https://dryrocket.com/en/ ***UPDATE ZU DRYROCKET*** Ich habe die DryRocket am 03.01. gestartet. Zu Beginn lag die relative Luftfeuchtigkeit bei ca. 57–59 %, das Growzelt war vollständig geschlossen, inklusive aller Öffnungen. Anfangs habe ich versucht, das Zelt zusätzlich mit Tape abzudichten, allerdings hat sich dieses relativ schnell wieder gelöst. Am 05.01. habe ich das komplette Zelt mit Frischhaltefolie umwickelt. Dadurch konnte sich die RLF stabil bei 60–62,9 % einpendeln. Ab Tag 4 bzw. gegen Ende der Trocknung ist die Luftfeuchtigkeit dann kontinuierlich gefallen. Die Temperatur lag über den gesamten Zeitraum größtenteils konstant zwischen 19,5 und 21,5 °C. Lediglich für ein paar Stunden gab es einen Peak von 23,9 °C, ansonsten keine größeren Schwankungen. Die Buds waren überwiegend klein bis mittelgroß, optisch sehr sauber und das Terpenprofil ist nach wie vor sehr gut erhalten. Das Nassgewicht lag insgesamt bei ca. 335g. Nach Abschluss der Trocknung kamen die Buds für 2 Tage in ein luftdichtes Glas. Dort lag die RLF bei 52–54 %, was fürs Curen eher knapp, aber noch im Rahmen ist. Mittlerweile wurde alles in Grove Bags umgefüllt, dort hat sich die RLF bei ca. 55 % eingependelt. Die DryRocket funktioniert, man muss jedoch wirklich darauf achten, dass das Zelt so dicht wie möglich ist. Bei mir hat es ab Tag 3 deutlich geholfen, das komplette Zelt mit Frischhaltefolie zu umwickeln. Ich möchte klar sagen, dass ich für das Testen der DryRocket nicht bezahlt werde und mir die Rakete auch nicht geschenkt wurde. Grundsätzlich halte ich die Rakete für eine sehr gute und durchdachte Idee. Das Produkt ist Made in Germany, kommt aus meiner Region und in dieser Form gab es meines Wissens nach bisher nichts Vergleichbares. Der Ablauf ist extrem einfach: Pflanze ernten, aufhängen, Rakete starten – mehr muss man nicht tun. Aufgrund meiner Rückmeldung zur etwas zu niedrigen RLF wurde von DryRocket offen und lösungsorientiert reagiert. Es wurde nicht versucht, den Fehler auf den Kunden zu schieben. Stattdessen wird aktuell an Optimierungen für kleinere Mengen unter 500 g gearbeitet. Für die Zukunft würde ich mir wünschen, dass man das RocketFuel (Silica Gel) regenerieren oder zur Regeneration einschicken kann. Außerdem fände ich eine erweiterte App mit mehr Parametern und Einstellmöglichkeiten sehr sinnvoll. Der aktuelle Preis liegt bei 299 € inkl. Rocket Fuel. Ob einem das den Preis wert ist, muss jeder für sich selbst entscheiden. Produktion und Support sitzen in Deutschland was ein klarer Pluspunkt für mich ist. Ein weiterer Test folgt ! Wer mehr Informationen möchte, kann hier gerne reinschauen. In diesem Thread hat DryRocket viele Fragen zu ihrem Produkt beantwortet: https://forum.cannabisanbauen.net/t/nur-ein-entfeuchter-dryrocket-innovativ-oder-ueberfluessig-lasst-uns-das-klaeren-ama-mit-dryrocket/74222
Likes
11
Share
Photos were taken on day 14!! Fox farms ocean forest soil, first run with that. 16 oz solocup! Plan is to go outside of the box a bit on this one and do some LST on this autoflower in the solocup! Heres goes nothin!!! Any questions, just ask! Will not feed any addition nutrients until flowering starts..
Likes
18
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.
Likes
6
Share
🌱 Finalizando la semana 3 y con buenas noticias 🌱 Efectivamente, esa carencia que venía notando estaba relacionada con calcio y magnesio. Después de añadir Calmag, las plantas empezaron a mostrar más vigor y mejor desarrollo. Hace unos días realicé el trasplante a macetas de 11L, probablemente las definitivas, aunque esto dependerá de cómo avancemos en las próximas semanas. 💪 A partir de ese trasplante, también comencé a incluir BioGrow en el riego, para potenciar el crecimiento. 📝 Dato útil: Antes de trasplantar, esperé a que el sustrato estuviera un poco más seco y compacto, lo que facilitó muchísimo el proceso. Luego, en ese primer riego post-trasplante, aproveché para aplicar fertilizantes. ¡Seguimos avanzando y viendo los cambios día a día! 🚀🌿
Likes
19
Share
Switched to GH flora 3 part. Playing around with flood times. The are taking up water at an exponential rate. Started with 3, 3 minute floods, up to 6, 4 minute floods and they're still drying up the puddles within an hour. Plant 1 is ahead of plant 2 by a day but it is half the size🤷‍♂️ Topped day 16. Not obvious in the photos as I had hoped but they bounced back within minutes Thank to evryone who gave their input, every little bit helps🙌 After all your suggestions, I've, backed off the light, backed off the flood time and count. We will see if these girls perk up a little more👍 Day 17 I noticed progression of what I believe to be a calcium deficiency? That's on me, forgot the calmag originally🤦‍♂️ another thing I decided to look into was the twisting of the leaves as the plant 1 is also starting to show. Could my ph be alot higher than I think? 4 gal res I added a couple ml of phosphoric acid at the start and about 1ml a day since(I didnt prep my cube as well as I should of) seems like alot to me. The system would rise from 5.3 to 6.3 throughout the day. A flood cycle doesnt seem to affect the ph, more over time. I am constantly stirring the mix and no my meter is not yet calibrated. I have ordered what I need but I'm considering calibrating with the chemicals I have and doing a res change. Good news is, they do seem a little more lifelike after implementing all your suggestions. Okay drained and rinsed my res, ro water into the tank was holding 6.97ph, good enough for the girls I go out with🤷‍♂️ gonna mix up a batch, do a top feed to waste, and see what happens. It has been nearly 24h since my last flood. Also, struggling with lows of 30% humidity sometimes. Dont know if that plays a role here. Okay something was off.. I did a top feed to waste with fresh 5.3 nutes and the runoff came out at 7.5.. so I did it again...and again...maybe a half doesnt times to each block with no change. I started to reuse the runoff as I wrote off the batch at this point. I then switched to a pump and did recirc feed to each block aprox 20 litres at a time, stopping to rebalance. Literally 100s of litres later I am stable at 5.5....going to drain rinse and refill. The interesting part is that what ever was saturated in those blocks is non conductive, the ec didnt change the entire time🤷‍♂️ Spent the next couple days recovering. Looking better now. Sardine catcher installed.
Likes
2
Share
Absolutely beautiful looking plants, I didn't expect them to become that big honestly, one of the 2 plants is more advanced in flower, the smell it's absolutely incredible, super sweet fragrance coming from the buds, don't even need to get close to the buds, really happy with how this automatic plants by original sensible seeds have performed!
Likes
15
Share
Flushing her, she smells amazing. First time growing this girl and she's already one of my favorite. I will not water her for the rest of the week to begin the drying process.
Likes
22
Share
First week of flowering and its going great! The plants are still nice and green from the biogrow we gave some weeks ago, next steps is to give some guanokalong bloom nutrients and a small shot of green sensation from plagron! The first week of flowering we already found 4 males and removed them from the tent, I'm observing 2 more plants which can be males, the rest seems to be females!
Processing
Likes
12
Share
@Cannabot
Follow
She's really looking good.Lots of side colas and one mfkr main forming.Enjoying the outdoor sun,weather has been good this week.Shes a thirsty girl,pots no sooner heavy then it's light lol...bt I'm not complaining.
Likes
11
Share
*Week 3 Flower - 09/10* Blimburn Apple Fritter - Seedsman Genetics Critical+2.0 Healthy - 0 signs on of deficiencies Most fan leaves have been stripped; - Lighter defoliation - Aggressive LST on main colas *Week 3 Flower Mid-week update 09/13* Approximately 3 inch increase in Height on both plants - Critical+2.0 - Seedsman Genetics - Blumburn Apple Fritter 1 Gallon increase on water feed (Nutes included) Budsite density has increased. Light defoliation *End of week recap 09/16* (Week 3 Flower) BlimBurn - Apple Fritter - 47 Inches - Flowering processing accordingly - 0 deficiencies Seedsman Genetics - Critical+2.0 - 46 Inches - Flowering processing accordingly - 0 deficiencies Increased water feed (2.5 gallons every day +Nutes) *SEE UPDATE END OF WEEK VIDEO RECAP*
Likes
9
Share
@Growtopus
Follow
Alle 3 sind enorm explodiert und größer geworden, das Pflanzengeflüster knallt richtig rein 👌🏻 Bei der Kontrolle sind mir ein paar Trauermücken aufgefallen, deshalb wurde eine neue Gelbtafeln reingehängt und mit Neudomück gegossen, um die Larven zu töten. Durch gezieltes Entlauben wollen wir die drei schön buschig bekommen, wobei die Cookies and Cream jetzt schon sehr gleichmäßig und buschig wächst. Nächste Woche stellen wir definitiv auf Blüte um, da sollten alle 3 bereit sein und es passt gut mit den Anwendungen vom Pflanzengeflüster. C&C und Seifuku erholen sich auch sehr gut vom Toppen und die neuen Triebe kommen gut. Um die Temperatur zu halten, wurde die SANlight 20 % mehr aufgedreht, also sind wir jetzt bei 60 % bei 75 cm Abstand. Somit ist die Lichtleistung, die bei den Pflanzen ankommt, nur leicht höher als vorher, die Temperatur bleibt aber stabil über 21 ° C "tagsüber".
Likes
52
Share
14 Jul 2021 The plant is still looking lovely, and her buds look wonderful. I’m continuing with the flush of properly pH’ed water chilled to 46.3F. My initial pH was 7.7, so I added 15 gtts (1.5ml) of pH DOWN which adjusted the pH to 6.2. I’d like it to be higher, but working with pH DOWN is so much harder than pH UP! The TDS going in was 75 ppm. Our heat wave is still going strong, and the temperature in the tent was 88F with humidity at 44%. The runoff pH was 5.3, and TDS runoff was 1897 ppm. That’s a reduction of 410 ppm from the watering on the 12th. At this rate it’ll be next week or later till I can harvest. If it does, I may end up harvesting sooner and curing longer. 🤷‍♂️ I’ll have to wait and hope I guess. 16 Jul 2021 I’m continuing with the flush today, and I’m beginning to think I should start flushing more often, yet I don’t want to damage the plant. At this stage of growth I don’t know if overwatering is as detrimental as it is to a younger, less developed plant. I want to harvest it before she gets too far along in her trichome development. She was clearly ready when I checked them on July 10th, and I don’t want her to get much farther along. Today I’m giving water at tap temps because at this point I don’t believe it matters. Everything I’m deciding to do is purely by instinct and trial and error. I feel like a researcher working on viable material that has a known outcome in general, but getting to the final stage (harvest) is detrimental in how the individual works the issues, or problems, and prepares for a desired outcome. Only each strain is different, and learning to adjust to those differences is the learning process. I never knew that growing weed could be so much fun, or as stressful! But I dig it! Today she received a gallon of water with an initial pH of 7.7. I added pH down 5 gtts (.5ml), which adjusted the pH to 6.4. TDS going in was 91 ppm. Runoff pH was 5.9, and TDS runoff was 1407 ppm. Temperature in the tent was 84F, and humidity was 60%. There was a 390 ppm reduction from the last watering 2 days ago. At least it’s moving in the right direction. 18 Jul 2021 The flush is going well as you’ll be able to see once I post my numbers a little later in this note. Her buds are still looking awesome, and she still looks healthy for the most part. Her leaves on the fan side still look dried up on the edges, but not completely dead. Since it’s happening on both of my plants in the same location, the cause was easy to surmise as I’ve noted it before. I’ll be ready for harvest in about a week or less, and then her tent mate will be left alone for a while. Today she was given a gallon of water chilled to 57.2F with an initial pH of 8.0. I added 8 gtts (>1ml) of pH DOWN in 2 separate increments to adjust it to pH 6.7. The TDS going in was 80 ppm. The runoff pH was 6.1, and TDS runoff was 784 ppm. That’s a reduction of 623 ppm since the last flushing/watering. So I’m down into the 3 digit realm now, so hopefully it won’t be too much longer! She smells like blueberry muffins! I’m not even kidding a little. Like blueberry muffins. I’ve never seen a better named strain ever! 20 Jul 2021 Flushing continues in my grow room today. I swear this part takes so long and is so frustrating. I only have myself to blame, but all is still good. She is ready for harvest, but I still need to finish this up first. The TDS runoff shows that the level is still dropping, just not as fast as I’d like it to be. Today I chilled a gallon of water to 57.7F, then got her ready to give my baby. The initial pH was 8.1, so I added pH DOWN 10 gtts (1ml), which adjusted the pH to 6.8. The TDS going in was 74 ppm. Runoff today: pH 6.3, and TDS 658 ppm. Our heat wave is still kicking hard, so the tent temperature was 88F, and humidity was 49%. I’m still hoping to harvest in a few days to a week from now. It all just depends on the flush. I didn’t bother with any pics today. Mainly because the lights went off as I was finishing up and figured there aren’t any changes from 2 days ago to bother. However, today ends a week, so the next will be a fresh week, so I’ll take pics then.
Likes
6
Share
@Chubbs
Follow
What up Fam, weekly updates on these lovely ladies. This week it's been warm and such a bad time for my AC to go out but overall temps been in the mid it's inside the tent and the plants seem to not mind at all. They're still getting fed 16oz daily. I'd say from the looks, maybe 2-3 more weeks until harvest. Happy Growing