Good week. Putting on a nice coat of frost and stinks like skunky sweet candy. Doing really well for a 2 gallon in a small tent.

Taking it day by day. I think the power going out for the few days it did messed with her. Bucket is getting smelly and looks like the roots are getting root rot... but hopefully I can combat it. Maybe need to get a bigger airstone.. hopefully the one I ordered from Amazon actually shows up.. Ac Infinity tent and in-line fan will be in today! 😬Thanks for stopping by. 🙏🏼🙏🏼

Hi growmies 👌🏻 sorry I’ve missed out the last 3 weeks but al add them to the diaries soon. Everything has been going great so far only a few more weeks to go on some of these girls - the clones are in week 3 of flowering as well so they’ll not be far behind. Clones are looking beautiful as well happy with this run of they fill out a bit more before chopping 👌🏻🔥

Everything was good they recovered well from training. Cranked the power up to 60 percent and raised the light.

**(short video in photos added)** This thing is fun to watch , still Trying to figure out what's all going on here. She started to get a new product to me, Tea co Biological Supplies Super tea blend. See how this works out. Using it on this and the LIT Velvet Gary and Most wanted Vaderade strains. Besides the new brew, she's looking good . Got moved to the 3x3 from the lil 2x2 now so hoping that she can get a bit more hieght prior to Flippin in the next 2 weeks. But we will see how the Super Tea blend works over these next 2 weeks, of all is well ill be Flippin 12/12 (well 11/13 to initiate flower for a week or 2 then 12/12) Beans_ Zamnesia USA-https://www.zamnesia.com/us/ If curious about the Tea blend here u go. Tea co Biological Supplies / Shop- https://www.teacobiosupply.com/shop Tea co Instagram - https://www.instagram.com/teacobiosupply?igsh=enViOHE2dWltbHY2

First in water, then transfered to a paper towel. 2-3 Days in only two opened up , I dropped all into the soil - eventually the last one also germinated. Eventually, 2 weeks in, they were still not growing much.

Last week of veg before flip gave them a good defoliation and double feed ..... will defoliate again at day 20 of flower , but so far so good am pleased with the veg stage

Я из России, хороших новостей нет. Закончу ли я репорт - не знаю. Всем мир.

Germinó en 48 horas con éxito, usando la técnica clásica de germinado en papel

*Jan26th-#plant2 was ready to cut Tuesday she's In the dry tent goon for a few days then will jar up. * Plant 1 is goin strong still. But they both are on a tap water diet till the end. We're at week 14 from seed and 8th week flower so should be done growing and filling out from here on hopefully.. Just glad the tents set up fully now with exhaust and dehumidifier so no more crazy spikes (would get up to 80% rh and 55°f .. cold and humid had me freaking out lol. But that's all sorted) All in all I'm happy with the lil test run on these, seeing how they did with minimal nutrients and light gives me hope for the next go. Still debating on running these with growdots , my next set will be with ganja farmer seeds and growdots. Should be fun may throw in a plat jelly or two aswell. We shall see once the beans get here.. As always tho. Appreciate anyone thst may leave suggestions or feedback. Always like gearing what u see or don't see . Helps get better so its mainly why I'm here . And thanks to anyone goin thru my rambles ,videos and photos. Hope everyone's grows are doing well, I'll be skipping around checking out what is going on .! Till next update take care gang !

Been a hands off grow so far. Just feeding and defol when I can

Una buena semana, ya van por el dia 13 dhe fase vegetativa en unos 10 dias aprox hare el cambio 12/12

The tale of one strain but two different grows. Plant a is looking she she is ready to be harvested. I'm going to give her another week or two just to get the tricone a little more amber about less then 5% Plant b is looks healthy and is getting thick I am probably going to give it another 3 week cause alot of tricones are not cloudy about 50 to 60% is cloudy will wait till 90-100% is cloudy

4

Room setup rundown, examples of bud, et al in pictures... Seedlings/Clones lights - Viparspectra XS1500. Vege lights - Mars Hydro FC-4800 Flower Lights - 650w 3400K 1900umol/s PAR, (3) 226w DIY 2900K 630umol/s PAR (678w and 1890umol/s), Substrate - 50/50 sphagnum peat moss and vermiculite in 5-gallon pots Climate Control - Luckily, the lights, winter and normal furnace use all equate to a decent temperature, though a bit on colder side in in vege phase, sadly. Humidifier is needed early and later a dehumidifier is needed when canopy develops. I only grow in the winter months. Irrigation - do not use the emitters in this diary. They suck a big fat dick to skip a line to suck a bigger dick. Use the pressure compensating type. https://growdiaries.com/diaries/232811-strawberry-cookies-og-r1-cherry-diesel-bbgs-ego-epg-ebg-grow-journal-by-001100010010011110/week/1366923 -- use something similar to those. They come in different shapes, too. Basic process The little light takes care of seedlings in 2.5" wide seedling pots until first up-pot. The 1-gallon pots fit well under the FC4800 in a 4x4 tent until day 21 after sprout. I plant 150% or more of what i need, so i can kill the weak without concern. The goal is for every plant that makes it to the 5-gallon up-pot being capable of producing a minimum of 160 grams with a maximum of a 35-40 day vegetative phase. Third up-pot is into 5-gallon nursery pots and now under the 3 DIY lights and the 650W light in the big tent for a couple more weeks of vege. An irrigation system in the big tent saves a lot of time. One scrog for training and another for support, just in case. Reverting back to a more systematic approach to canopy composition moving forward. About 2.3 colas per sq ft and 8 primary colas per plant. Yields were similar when over-crowding and being less systematic, but the proportion of less dense nugs is greater and trim time is needlessly elevated because of that fact. I was very controlling about this the first couple years but got away from it for far too long at this point. Drying / Curing - Into mesh racks for 9 days. I wet trim and cut down to similarly sized buds for even drying. Temps are controlled around 68F and RH is set to 60%. Then into some 5-gallon buckets with gamma seal lids and (3) 2-way 67g boveda humidipaks (58% or 62%) in each bucket - 1 at bottom, 2 at top. Temp/RH probe confirms that they hold the RH steady at 60-63%. Cost - 0.33 cents (USD) per gram produced. This includes an accelerated depreciation expense for all equipment used, fertilizer, water, electricity for all equipment used, new filters and other yearly purchases - bti, ph strips, sticky traps, etc. I'm a finance guy, so these numbers are comprehensively accurate and purposely err slightly on high side of cost. The only facet not included is the cost of my labor.

Plants are currently drying 2+ months later. And next project au79

👽👍 Tent getting nice and full now from these 5! 🔥🔥🔥🔥🔥 I did some hst and lst this week on some tall stems to try and keep an even canopy, looks like they responding well. The thin sativa looking one was only done recently so will take another pick when she's in full salute again! Haven't done much defoilation yet just tucking the leaves away, I'm going to lollypop abit more soon I think to get them top buds firing! So much growth Plagron kicking in!!!! Had some pale leaves last week so added more Nitrogen. I think I can see a slight difference in colour this week . One plant has some yellow tips so I been applying some calmag spray to the leaves as I heard it helps. Added 2ml pl of calmag to this feed also. 👌👽👍

04/06/25: Twelve days after placing cuttings into the Clone King, all clones have successfully developed roots. Early signs of rooting appeared on day 6 for a few of them, and by day 10, every cutting had begun pushing out roots. While root vigor varied across the group, the consistency of success at this stage is encouraging and speaks to the reliability of CloneX and the aeroponic method when paired with clean RO water. I selected five of the healthiest clones to move forward, potting them into 1-gallon containers. Three of those came from PL4 and two from PL1. One plant from each genotype will be kept as a new mother plant to preserve the genetic lines for future projects. The remaining three—one PL1 and two PL4s—will continue on as part of this grow journal through flower. One of the PL4s is being designated for chemical reversal. The goal is to induce hermaphroditism in that plant and produce feminized pollen, which will then be used to pollinate both the PL1 and the second PL4. This will allow me to create both outcrossed and selfed feminized seeds, as well as collect and store the resulting pollen for future use. Four of the selected clones were transplanted into 1-gallon AirPots, with the fifth placed in a fabric pot since I’ve temporarily run out of available AirPots. All were planted in Roots Organics Original soil, which I pre-moistened before transplanting. Introducing rooted clones into dry soil can create unnecessary transplant shock—roots prefer contact with a moist medium from the start to ease the transition and promote uptake. Now that they’re in soil, the focus will be on recovery. Moving from an aeroponic environment into a dense medium is a stressful shift for the plants, and while some temporary drooping or slowed growth is expected, I’m looking forward to seeing how quickly they bounce back and resume vigorous vegetative growth.