Blue dream

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 REMO NUTRIENTS 👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Fast finishing and the smell of blueberry and cheesy candy. I didn’t take a wet weight. Waiting on the drying now. This was just a run with 3 from seed to find a winner. 2 of them are winners. One of blueberry candy and the other smells literally like a mf cat pissed on it. I’m guessing from these 3 shmedium plants will put out about 1.5lbs. We will see in a couple more weeks. It looks gorgeous though. This was just a test run with a few from seed to pick out the winners. I’ll be doing a full run in my 5 x 10 tent my next grow and I will be actually doing a full diary. More to come on another diary.

Still in 1ltr pots due to space restrictions. I have pulled a few fan leaves to allow light penetration and air flow increases. From next week I will start adding green sensation 👌

Ph pen failure 😞

😫Been a tuff week as my ph pen failed so had signs of defiantly But that’s now corrected so hope it didn’t set them all back too much

I will always go organic from now! Especially using rqs nutrients had the best grow and the best outcome I’ve ever had! Dense buds all over and end weights matched that! And I didn’t even top it or stress it Too much! Wanted to see what happened if I just let it grow and I’m amazed! Royal queen seeds deserves the top place!

🔥🔥🔥

🍼Greenhouse Feeding BioGrow ☀️ by VIPARSPECTRA (models: P2000 & XS 2000) ⛺️MARSHYDRO The ⛺️ has a small door 🚪 on the sides which is useful for mid section groom room work. 🤩 🌱 by ‘GARDEN OF GREEN’

I started germination of 3 Gorilla Girl beans on 29/12/2020. I pre moistened my rockwool cubes with ph balanced water to 6.4. Made sure the plugs were just damp and not soaked. Using a small wooden dowel I increased the size of the plugs pre made holes. Than I sowed my beans into the holes. Ripped off a small piece of rockwool and mulched it up. Lightly filled the holes in with the mulched rockwool. Than stuck the plugs into a misted humidity dome, to complete germination. Shouldn't take anymore than 4-5 days to see some sprouts. Once I see some cotlydon leaves bursting to the surface. I will get the plugs planted into some 1 gallon pots. Plus get these ladies situated into their home. Cant wait! Some background information on my experience with Gorilla Girl. I've only grown this variety out once. Did her in a 1 gallon SOG grow and she was a beast! Fat Chunky main cola just loaded to the tits in trichomes. Amazing bud structre and a definite cut above alot of the genetics flooding the market. I cant wait to let this variety loose in a larger scale grow. See what these powerhouse genetics really have to offer. Haven't grown out much sweet seeds stuff. But what I did test drive got there genetics into a larger setup. So caps off to them.

107 days!! Here is another great experience :) The girl has matured, 330 grams of wet, full of sticky, resinous shiny, pleasantly smelling flowers :) I think it will be about 90 dry :) although the girl is definitely not the biggest, but she looks great, the smell is also amazing :) I also got some sugar leaves from which I will make bubble hash, For me personally it is really beautiful and good growth, which I think will definitely be confirmed by the dried and cured flowers :) there will be a smoke review, as well as the total dry weight. good luck to everyone :).

Growing strong cut 13clones today and transplanted the two biguns loving how they are turning out

He realizado la poda FIM ya tienen entre 3/4 nudos cada planta,debido al posible estrés que puedan tener ,hoy en el riego llevan todo para recuperarse perfectamente el agua del riego es de filtro de osmosis inversa,se ha aumentado el riego a 0.6l ,la temperatura subió algo debido al calor que hace en la zona donde vivo,pero temperatura y humedad controlado,apareció un poco de variegacion en una sweet skunk espero que se pase pronto no es nada preocupante.esperemos haber la respuesta que tienen después del trabajo de hoy ,disculpen la calidad del vídeo pero esta vez me tocó trabajar con La lámpara encendida disculpen,las plantas están todas entre 17/18cm todas van por igual en altura,ya están todas con sus tutores saludos y buenos humos

15th day into flowering- Trim some Fan leaves /anything cover canopy. 18TH DAY FLOWER- LOLI POPPING. JUST WATER EVERY 3 DAYS PH 6.5

Que pasa familia, traemos la segunda semana de floración de nuestras crazy cookies y la verdad es que se ven sanas y vigorosas, ya comienzan a verse pelos y a formarse nuestras flores. Ph controlado 6,5 . Maximas de 28 y mínimas de 19, hemos cambiado la bombilla esta semana por una nueva de 400w HPS de sylvania. Veremos cómo avanzan la semana que viene.

This plant has CRAZY stacking on it. It hasn't grown up as much as it has branched out. This is a strain I'm growing to treat symptoms of MS, so with the stacking it may turn into a mom plant for cloning, but we'll see. It's received some feedings of liquid seaweed, black strap molasses, and URB in R/O water.

Day 71 Update: water today and likely pulled out and put in a closet for 48 hrs starting Tuesday or Wednesday. O is still well behind but seems to be on track for quite a harvest. S, V, and P are going to be harvested simultaneously in one go and then O will have the tent for its last week or two. Since O is still mid-flower, it got 8 ml of each of the GMB pH Perfect Trio in one gallon and the rest just got filtered tap. Day 73 Update: Lot of action today. Uploading pics from my phone, will update with tags and details from desktop later.

The first week of flower, amended the soil with 1/2 cup of bonemeal in each pot. The days after I applied it was very humid and white mold grow on the top layer of the soil. I used a spray bottle with hydrogen peroxide to kill the mold. This worked very effectively.

Por ahora facil de cultivar, 0 carencias 🙏🙏