The Grow Awards 2026 🏆
Likes
Comments
Share
@THCReich
Follow
The last 2 weeks the grow went well so far. Except the mimosa Z. She had a calcium deficiency as it looks. I continue to observe the Mimosa Z. I have now treated with Calmag
Likes
10
Share
All plants looking good. The Flower nodes are getting closer. They are getting watered about every 4 days depending if the pots are light. When watered they are taking about 4 1/2 liters until there is any run of.
Likes
8
Share
Everything is going well I got a raptor hood for my 600 watt so I was able to drop my light right on top of my plants maybe 6 niches away . Noticed she was getting a bit lighter in colour so I brewed up a tea first 1 ever just switched to organics tea looked good hopefully not 2 strong . I also pulled some branches out to open up more branches to get light as she was bushy and I did not want to cut most of the branches off because I'm not trimming larf lol. Now it's smooth sailing to the end I got 1 more top dressing next week and all I gotta do is water once a week
Likes
8
Share
Pretty much on autopilot right now. I've just been filling the water reservoir when needed. Last night I did a top watering to try to help push them through the last couple days. It shouldn't be much longer now. Pretty much all cloudy trichomes with hints of amber. Once I see a little more amber I'll chop. The topped girl will probably be harvested first, I think she's a little ahead of number 2.
Likes
26
Share
@darb35
Follow
Day 7 - little bit of water with Acti+Heaven, will move into the 9L pots in about a week just saving some space outside the tent. (Ph 7)(5 cm) Day 8 - little bit of water with Acti+Heaven (Ph 6.8)(6 cm) Day 9 - little bit of water with Acti+Heaven (Ph 6.4)(7 cm) Day 10 - little bit of water with Acti+Heaven (Ph 7)(7 cm) Day 11 - little bit of water (Ph 6.4)(8 cm) Day 12 - little bit of water (Ph 6.4) moved into their 9L final pots, PPFD at 230 (35%)(9 cm) Day 13 - little bit of water with Acti+Heaven+Grow (Ph 6.4)(9 cm)
Likes
2
Share
Strain: Chill Out OG F4 Day 14 of Flower Day: 63 from sprout Medium: Fox Farm Ocean Forest Light: Vivosun VS2000 at 75% VPD: 1.3 kPa Light Distance: 8 inches Watering: By hand, ~16 oz daily Nutrients: pH Perfect Advanced Nutrition Grow, Bloom, Micro 2 ml / L, 1 ml / L big bud Automatic watering ready to go!
Likes
8
Share
Bruce became a very pretty lady imo , grew on two nice big colas, other buds are pretty big too imo and really super dense. And above all her colours and her smell are making me a very happy man
Likes
24
Share
Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I'll start flowering tomorrow by switching to 12 / 12 h because the ladies mustn't get too high because the small flowering tent is only 160 cm high :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany
Likes
20
Share
@GR0WER
Follow
New week starts! I will wright updates every day now. Cos I don't want to keep photos on my mobile devise. I'll make new photo of a new day, load it up and delete immediately. Keep it safe, guys. 🌞13.11.2022 I putted some more substrate to cover my flowers to the leaves. It's only 'training' till now. Also, one of my mini ventilators started to make a creepy noise. I ordered two more cheap mini USB ventilators. I hope they will live longer. That one died after a couple month of work. Sadly... 🌞14.11.2022 Next day morning my ventilator died. I scrued it apart. Then I remembered I have tattoo machine oil in my garage. When I oiled it and turned ON it began to spin like new... Mb I acted stupid buying two new ones, mb not. It's written on the oil tube: 'Oil your tattoo machine every 30 hrs'. So after a few days we'll see. :-) 🌞15.11.2022 The second one plant has a slightly larger second pair of leaves (triple ones). Maybe because it came from her seed one day later. There were a seed peeling problem to both of them and I was forced to help. A difference in germination time was about 8 hrs. 🌞17.11.2022 My ventilator died this evening. Two others I ordered didn't come to me yet. But they should come tomorrow. I don't know will they pass, but it will be better then nothing... 8 hrs difference between growing flowers still noticeable, it's disposed on photos. No feeding for today. 🌞18.11.2022 Today two new air coolers came. They are good quality and power for their's size but too noisy. Not so bad, I say. I installed one of them (it's on photo) and leave the second old one on it's place. It still works and a noise is not so loud. I wunder, why my plants are different by the size. Maybe because one of my old ventilators stopped all the time? 🌞19.11.2022 I watered my girls with 'GHE Pro Roots' and measured drainage today. Input was ph6.0 and outflow - ph6.5. I think we'll be OK in a few weeks. I learned from the grow questions that auto flowers grow better and bigger in pure coco with perlite, but i have mix soil/coco/perlite in my pots. Now I nervous if all will be OK. But my substrate is soft (tapped it with my finger) even when it's watered. We'll see how it'll go compared to others diaries of the same strain.
Likes
43
Share
🌱: LST on Day 15, 17, 18, 19, 20, 21 removing shadowing/shadowed leaves constantly 💧 : 2l, SIP 6l 💡 : Dli 35 mol/m²/d 🤔:
Likes
10
Share
One of the two plants was harvested in the 10th week, the other will follow next week...It will probably also be 600-700 grams I think. Update will follow The buds are very firm and compact... im very Happy with my first grow... Dry Conditions: start with 60% RH and stayed at 50 - 60% the whole time, unfortunately I couldn't get temperatures below 20° degrees. During the day 21° and in the evening 18-20°, after 8 days I was able to start dry trimming... Update: 1. Plant 696 gr wet with leafs - 125g dry 2. Plant 770 gr wet with leafs - 150g dry Record bud is 85 gr wet. now i put the buds in Bottles to ferment at least 2 Weeks...
Likes
4
Share
Welcome to week 5! Things are progressing along as some plants have started to display sex. I've removed some of the males that have shown themselves so far as we aren't looking to breed this run. Going to let them veg for this week and then I will be flipping the lights to get the flowering cycle started. Huge shout outs go to @MarsHydroLED for allowing me to grow with their kick ass gear! Huge huge shout outs go to all my followers and to the people who stop into the diary alike! Keep on inspiring. -The Projexx Day#29 Ladies are growing along and recovering nicely from the topping , Watered 1.5L from the bottom. Day#30 Plants seem to be doing ok from the water increase. Things moving along nicely Day#31 Pictures N/A. Plants are growing along remove 2 males Day#32 Watered 1.5L from the bottom , Plants arent very happy. I think the issues is i'm not waiting long enough between waterings. I will have to practice the technique more for now I may go back to top watering. Day#33 Pictures. N/A.Top fed 3.5 L each at 550PPM I knew I wasnt giving them enough water. Things are about to change heavy duty now Day#34 Pictures. N/A Plants are ridiculously happy now. Im going to cut away all the dying leaves and flip the lights. Day#35 Pictures N/A Last day of veg for this project. Im excited to see what these plants do in flower! Recap: Things where ruff at the start of the week but by the end we were rocking and rolling again and ready for flower! Wont be long now till we see some real action!
Processing
Likes
27
Share
@Reaper
Follow
Day 28: start of week 5 i start to see a cal mag defency on the critical (see the leaf picture) I got no calmag as im very low on cash right now. hope she will do great without it ill put more pictures as the week progresses, the critical finishes at day 50 so theres only 3 weeks left The coockies are now on day 21 Update: Day 31 (see final video on this week) The calmag problem is very visible on one of the critical (bottom left) no too bad, the girl scout cookies had a nice stretch and the leaves gained a lot of size everything Goes well the coockies drink a lot now. See you at week 5
Likes
3
Share
@xipo86
Follow
day 15 of blooming... streching is on full force and getting bigger by the day.... tent is filling up nicely. at the end of the week 3 will do a defoliation for a better airflow and light exposure.
Processing
Likes
15
Share
@Smokwiri
Follow
LoL, a little bit of burning on the edges of the leaves, not too much to worry about Progress looks very good Her bud is growing slowly, but dense I made the feeding with just a bit more than 1 L, about 1.25L the molasses is not measured, i just took the back of a spoon and dipped it, and stirred it into the watering. Do keep in mind that i'm only using about 80 watts of light (cob led).
Likes
3
Share
@Organic_G
Follow
Interessant zu beobachten wie die Lila Pigemtierung innerhalb einiger Tage die Pflanze färbt, das UVB macht auf jedenfall seine Arbeit, sehr schön und verdichtet nochmal ordentlich die unter liegenden Blüten… 2/4 wurden geerntet, denken in 7 Tagen kommt die nächste Ernte
Likes
133
Share
@Qutro
Follow
Hi Growmies, So let me introduce you this 4 little gorilla gals who survived the first week of their life in the wild. As I mentioned last week, we needed 4 healthy individual to populate the future forest and it’s succeeded. The one who struggled is also starting to catch up to her sisters.🌱 They got a bit lanky as I was way too careful with the light. One needed help because she fell on the pot. So slowly raised the light intensity first to 220 ppfd and at the end of the week we finished at 350. They seem to like it so will leave it for a few days. The sf1000 is running on 55% at the moment.🌞 Watered twice this week. First with 150ml each and 3 days later with 220ml. No macronutrients have been given to them yet.💦 I’m happy how they look 14 days after the start of germination. See you next week!🙌