Likes
1
Share
@tigerbomb
Follow
da questa settimana ho smesso con i fert e comincio a dare solo acqua per poi fare un paio di flush non so se da questa o dalla prossima settimana -11/01 fatto il flush con una media di 25 litri a testa, da domani sarĂ  la dodicesima e probabilmente ultima settimana -dovrĂČ eseguire un ultimo flush prima del raccolto e devo programmare lo spacco del tronco
Likes
20
Share
Everything went ok this week. They seem to still be drinking ok but not as much. The flowers are hard dense. I also notice the smell isn't as strong a week ago. This week I downgraded the tea to just molasses and my diy compost.
Likes
42
Share
@BLAZED
Follow
Week 16 (Harvest) 1-2 Drying day 1 Temperature: 24.5 to 19.5 degrees Humidity: 65% to 50% The girls are ready to be harvested! Before chopping them down, i took a lot of pictures. I was able to remove most of the soil from the Biscotti #2 to see the rootball. I hang the plants as a whole to have a slow dry. The exhaust fan is on setting 4. 2-2 Drying day 2 Temperature: 19.1 to 17.5 degrees Humidity: 62% to 57% I changed the exhaust fan to setting 2 because setting 4 was a bit high in my opinion. 3-2 Drying day 3 Temperature: 19.9 to 18 degrees Humidity: 62% to 59% Today i checked up on the drying plants, and i see there are some buds touching other buds, so i chopped the plants in half. The buds are still to the main stem for a slow dry, but are hanging more spreaded out to prevent any budrot issues. I changed the exhaust fan to setting 1, as someone told me that it was enough air movement for drying. 4-2 Drying day 4 Temperature: 19.8 to 18.5 degrees Humidity: 62% to 59% 5-2 Drying day 5 Temperature: 19.9 to 18.8 degrees Humidity: 62% to 59% Today i checked on the drying plants and the buds are shrinking a bit, they are getting a little bit crispy on the outside aswell, I hope they wont dry as fast, and i aim for a 12/14 day dry. For the next grow i already germinated 2x Chemdog (GreenHouseSeeds) 2x Gorilla Kush (GanjaFarmerSeeds) and 1x Deep Candy CBD (GreenHouseSeeds) And I have some upgrades planned aswell! I bought a autopot kit with 4 15L pots, this way the plants will have water and air 24/7 whenever they need it. I have seen alot of great results using autopots so i am very exited to try it out! And I bought a small camera so i can shoot some weekly timelapses! Feel free to Follow me if you like to get notified for the upcoming diaries! Thanks for checking out this diary, peace! (More harvest updates coming in the next couple of days!) Huge thank you to Zamnesia for the seeds, and Plagron for the collection of nutrients, and the opportunity to participate in the POWERBUDS contest! It was a fun and learningful adventure!
Likes
3
Share
This strain is mind blowing the smell and the oils it leaves everywhere it touches
Likes
21
Share
Likes
60
Share
Beginning of week.. Wow.. Just... Wow lol.. That's all I can say. Amazing scent.. Gorgeous colors.. Very happy and healthy girl. Besides very minor spotting on some lower leaves.. Which I am assuming was from Calcium def.. She is looking great! I'm not sure what this is all about, but damnnear all my plants have this clawing on leaves that are not exposed to the light.. Looks like wind burn.. Looks like nitrogen toxicity.. But I know for a fact that its neither.. Fans are not even really blowing on the plant itself.. And other leaves would also be clawing if it were nitrogen toxicity.. I'm assuming it's just from not enough light exposure.. But not an issue.. She is happy and loving life! At this point I am stopping silica.. Just too many conflicting articles about it not doing any good in flower.. And even causing the smoke to be harsh and the bud hard to break up.. Which does make alot of sense.. I only like to use silica in veg anyways.. And for the stretch.. It just makes more sense to me.. Mid week.. Adjustments need to be made.. The very top of each cola is getting a little bit of clawing.. I'm thinking it may be time to cut back on some Micro.. Maybe even the Floralicious Plus, since they both have so much Nitrogen in them.. She's getting plenty of CalMag, and the other trace elements in the Micro shouldn't be that much of an issue.. Still gonna use the Micro.. Just cut it down from 1mL/L to .5mL/L. Maybe the clawing is just how these plants tend to grow?? I'm not sure.. I see alot of the clawing on her small side branches.. Always have on other grows too.. But maybe I've always been giving them too much Nitrogen in bloom.. Just seems more like a 'not getting light' kinda thing.. But now that it's on the top of the colas.. I'm thinking its a Nitrogen thing.. Anyways.. Such a gorgeous plant! Gorgeous colors.. Amazing smell.. Just... WOW! Lol Next day.. Ok I'm thinking the clawing is getting a little worse.. That's after I fed her using .75mL/L of Micro and about 10 drops of Floralicious Plus.. Both containing a bit of nitrogen.. I'm going to have to completely cut out the Floralicious Plus and just .5mL/L of the Micro.. I hope that doesn't cause any different issues.. It shouldn't.. And I'm going to bump up the Kushie Kush bloom booster a little.. Still not full strength but getting closer.. I hope this doesn't affect my final yeild and/or taste! I will literally cry if the taste is fucked up at all... 😱 lol.. Nah.. As strong as it is now.. I think that would be impossible! I got my new tent in yesterday.. Haven't set it up yet tho.. Gotta get everything ready to switch over soon.. It's still a 2×2.. But instead of 48" tall it's 55" tall.. Which would be a little better for taller plants (not by much.. But still better lol).. Anyways.. No more Floralicious Plus and only about half of the Micro doses (lol) that I intended to use in the first place.. She really doesn't like Nitrogen in flower.. Which is understandable.. But I've never had a plant this sensitive to it before.. Good learning experience for sure! End of week.. So I bought a Brita filter because my tap water is pretty shitty.. 240 PPM - 260 PPM.. I've only ran about a gallon through it and its barely bring it down to 190 PPM - 200 PPM.. I mean.. I also didnt use the actual Brita filter yet.. Just the Wal-Mart brand.. It sucks obviously.. When I run the actual Brita filter in my drinking pitcher.. It can bring the tap water down to about 160 PPM!!! Compared to the Wal-Mart filter.. That is fucking incredible! I'm thinking when I run a couple more gallons thru, it will hopefully bring it down a bit more.. I don't need it to be 0 PPM.. just not 260 PPM.. That's fucking insane! Our water sucks out here.. The plants dont seem to mind very much, but after using the filtered water, instead of the nutrient water being 1150 PPM its barely 980 PPM - 1000 PPM.. NOTot a huge change.. But I think it will help. For harvest, I'll use the FloraKleen once along with distilled water.. Still got a few weeks before thinking about that.. But I always flush with my tap water and can't ever get the PPM below 400 PPM or so... Now about the plant lol... Yeah, it's gotta be nitrogen toxicity with the clawing leaves.. Again, I've went down on the Micro since it has so much nitrogen.. And also cut out the Floralicious Plus.. Sometimes I'll add a couple drops.. But it really makes me nervous lol.. I DO NOT want to hurt the yeild or taste of this girlie! But she is doing good.. Just as a test, I added a little bit of some feminized pollen to a very small nug on the bottom.. Its photoperiod pollen.. But this should create a "fast version" according to Sweet Seeds.. But she is doing good.. Smelling amazing.. Gorgeous colors!!.. Anyways... On to the next week!!!...
Likes
29
Share
Added a touch more KoolBloom into the mix. All is looking great, I think B2 is nearing its time to flush although B1 is a week or two behind. Buds are continuing to swell up nicely and have an insane amount of frost all the way up some fan leaves. Hopefully these will be down by late December or early January.
Likes
8
Share
Ran an extra week on 2.3 ec squeeze out a bit more bud growth before adding resin finish and begin the 2 week flush
Likes
Comments
Share
this strain is amazing!! I loved growing it, despite very slow growth and very small internodal spaces, it is very resistant to stress and topping!! it revealed itself in flowering with pretty compact buds, a smell of bugs (yes, bugs!!), with strong notes of grapefruit, gasoline... no waste in the taste!! I recommend, I will grow it again
Likes
2
Share
Plant is doing amazing! This is my first grow & I am so excited , I’m in the process of practicing LST , I am not the best but you learn as you go! Let me know what you all think! Please give me feed back and advice!
Likes
13
Share
Day 57 from seed and these BCN’s are smelling the best so far. Very citrusy smell! I think this is my last week of feeding these girls, and straight to flushing the plants next week. Im going to give them an extra week or two and see how it goes!
Likes
35
Share
@SAC87
Follow
Hi Growers. Everything is going well. Earlier this week I did another super light feeding, the same as last week. I raised the light to 50” and increased the light to 80% and will adjust accordingly per plant and environmental needs. I did notice a bit of yellowing on the PE and yesterday decided to do a stronger feed and go from there. I don’t want them starving and getting stressed into flower. After the first light feeds they popped up nicely so I’m interested to see how they like the higher feed. Environment wise, I turned on the oscillating fan to just help them strengthen their stocks and branches and still have the humidifier on. Temps & RH are good, no hot temp is a bit cool but it’s only 4 hrs. What week do you growers start training autos?? I’m starting node 5. Thanks for stopping, leave a like or comment if you’d like. I appreciate them. Happy Growing đŸŒ±
Likes
1
Share
@Kern420
Follow
Z ist etwas hinter unseren Anderen, daher haben wir sie auch noch nicht entlaubt. Sie wÀchst schön und auch Buschiger. Die ersten kleinen Trichome sind zu sehen aber man sieht das sie ca eine Woche hinter den anderen ist. NÀchste Woche wird Z auch entlaubt.
Likes
3
Share
@Swanberg
Follow
Can’t wait to see the quality of hash!
Likes
2
Share
Day 21 of the Auto Fractal on this plant will not do topping as she stayed a bit short for now but will do LST.This week will add more the ppm as soon they start flowering.
Likes
19
Share
Processing
Likes
5
Share
@O_GrowTom
Follow
WEEK☆7 J‱1 Premier jour de la semaine, les branches latĂ©rales rattrapent bientĂŽt la tĂȘte centrale. J'attends encore que ça se dĂ©veloppe avant de penser Ă  la floraison.@++ WEEK☆7 J‱4 La progression continue, j'ai commencĂ© un peu Ă  dĂ©folier le bas du plant. J'attends encore pour la floraison.
Likes
3
Share
@Jebbwardo
Follow
Cut down today definatly needed few more days as fan leaves where still green but i had to do it today. Smells amazing like peppery skittles. Let me know what you think will and i will update when dry and cured.
Likes
7
Share
@Ninjabuds
Follow
TEST RUN OF THE ELUFAH UAP-1500 My lemon cherry Runtz is starting to get some decent structure and finally recover. I don’t like how stretchy the nodes are on this pheno also I do t like the thin leaves. I think I probably got a plain Jane pheno. The plant really stinks though. That’s a plus. I’m sure when I flip to flower it will do well.
Likes
41
Share
12/01/18 Start of week 6 of flower. Buds are continuing to develop. The structures on the ladies vary widely. 1 has long sativa like colas. Another has 9 dominate colas and many many golf ball size side branches. 1 is a runt. amd the other is just ok. There are several phenos in these beans.