The Grow Awards 2026 🏆
Likes
Comments
Share
12/25 Merry Xmas. The ladies got a priming light feed this morning to get ready to clone in 2 days. Watered on 3 gallons plain water and 3 gallons of the mix the bed was thirsty 12/26 got a priming foliar feed. Very light. 12/27 took all the tops as cuttings for clones 12/29 watered in 3 gallons plain water and 3 gallons of full supplemental feed. 12/30 added trellis light training
Likes
11
Share
@Ninjabuds
Follow
Blackberry moonrocks both plants are still some of the best seedling in the tent so far. The better if the 2 is for sure the #1 plant in the tent. It has had the best start of a seedling i have seen in a wile. The leaves are angled like an airplane and they just seem thicker than the average leaf. They both seem like there going to have middium to longer indernode spacing. It's looking like a good start to a week the plants are strong they are getting to the point I can let the dried dry out completely. I'm thinking by the end of this week the plants will be starting to be sold. Last week I put all the plants into my bigger 2x4 tent with my medicgrow mini sun 2 the 500w version. Only a few of the plants were ready for that light. Seems like the only plants that really have good resistance and have a strong start are the weedseedsexpress.com seeds. Shout out to weedseedsexpress.com for the strong plants. I ended up putting all the plants back into my 2x2 tent with the 55w amazon light it has alot more blue light in its spectrum. It's kinda weird b4 I switched the plants to the 2x4 tent they were getting 220umol under my amazon 55w led then when I put them under the 500w light 25% strength about 50in from plants and they were getting only about 195umol in that tent but it was stressing most the plants. I assume a larger light has more side lighting hitting the plants. I think when useing larger lights it's good to measure umols from the top but also coming from the sides. I think durring seedling stage they only need about 50% the umols coming from the side the plants as the top is receiving. When I put the plants back in the small tent about the same umols as they were getting b4 the switch and they were still a little stressed. So for a few days I put the small light at the top the tent giving them 100umols for a few hrs then 130umols the rest the day.
Likes
40
Share
She is starting to fade on her own... I will start flushing her today... 👊😎
Likes
17
Share
@Chucky324
Follow
Hello. This is the end of week 2 and the beginning of week 3 of flowering. These girls sure stretched this week. Wow. I see 1 top about 10 inches from the top of the tent. That one branch might get super cropped if it keeps going up. Near the end of this week I want to get in here and do a final trim/prune. Paying attention to fan leaves that don't get enough light on the bottom and fan leaves that block light on the top. If you have a big plant try to leave 4 to 8 fanleaves at the end of each branch, with 8 on the lower branches and 4 on the smaller upper branches. I will also have a good look at the small branches to see if they are sucker branches or if they will put out a small bud. I know that I will put the plant into shock for a few days with the trim/pruning, but when the plant heals and starts to grow again it will go right into resin production, full speed. I will, generally not touch the plants till the end after that. I might take a few fanleaves off that block the light and I'll take off any yellow or dyeing leaves from the bottom too. Came into the tent a couple of days ago to water the plants and saw that the fan blade had disintegrated in it's cage, but it spewed out small bits of plastic all over the plants closest to them. About 5 weeks ago my other fan stopped working in the same place. Not enough lube I'm guessing. so I went and got that blade and it fit. So I didn't have to buy a new fan. 😃 I've got to get in here and vacuum that up before the resin starts flowing. Don't need small bits of plastic in my resin. 😝 See which fan blow up in the video. Oh yes, I also had to replace a automatic opening roof vent this week. It hardly opened a inch on a hot day. I bought one off Amazon, it was here in 3 days, and it works great. Ok. See ya next week. Be Cool! Chuck.
Likes
24
Share
@olli0420
Follow
Harvest time! Finally! Super happy with this grow! I'll update harvest with pics of jarred buds after it dried 💚 Last values were 200 ppm💚
Likes
2
Share
@smoker420
Follow
got bud rot on top head had to chop her down last time im doing a auto next to veging plants could not keep humidity down at last 2 week
Likes
17
Share
@Canna96
Follow
Hey now, I hope everyone is having a great weekend, it was a good week for the ladies in the 5X5, they are all starting to stack flowers and really starting to distinguish their own smells. The Bubble Runtz has the most indica dominant looking colas and smells absolutely amazing. The Sundae Driver is looking like she is gonna have the fattest colas and be the biggest producer. I am really hoping I get the red phenotype of the Red Hot Cookies, and both the Green Crack and Durban Nights are showing the most Sativa characteristics and looking great. I now have the Medic Grow Light cranked up to 100% in F1 mode and am also using the UV/IR for 30 minutes per day prior to lights out. I am running a 12/12 cycle and feeding the same mix of GH nutrients which include Silica, CalMag, MaxiBloom, and Bloom Booster, with additional food grade Hydrogen Peroxide in the reservoir to keep algea growth to a minimum. I mix one 5 gallon bucket of nutes per day and clean my reservoir once per week. My pump is set to auto feed the plants every 5 hours after lights on, and I have a gravity self draining runoff setup I built. Not much to do from here on out, just keep the reservoir clean and full, a little defoliation, and 5 minutes per day to mix a bucket of nutes. I hope they get fat in the next few weeks and then I have about 7 people lined up to help me trim, I will throw everyone two zips for the help. hoping to do the wet trim in a day. I hope everyone has a great rest of your weekend, Thanks for stopping by, Stay Safe and Blaze On!!! 💪 Website: https://medicgrow.com/ https://growdiaries.com/grower/medicgrowled
Likes
19
Share
Theses girls really filled in fast , colors , smell are amazing. Really happy definitely nice strain
Likes
8
Share
We started the week by transplanting the Orange Groovy F1 into the 3.6L pots filled with our SWA super-soil: we waited a bit more compared to the first 8 transplants just to make sure the roots were strong enough. At the same time we realized that the Orange Groovy F2 was the first plant ready for topping. This week we continued using our Lumatek dimming it at 60%. We are watering them with 1L divided by all 9 of them of osmosis water. On days 16 and 17 we topped every plant (except for Golden Pussies which still need a couple days and the Orange groovy F1 which we will not top because of her smaller size). We noticed that most of our plants presented lightly yellowed tips. We think that this is due to the deficiency of some immobile elements such as Ca, Fe, S. To solve this problem, we will put some decanted water (because it doesn't contain Chlorine which kills our bacterial substrate life) to give them the correct nutrients. We failed topping Orange Groovy F2 because the central apical started to grow even after cutting it but we kept it just to see what is going to happen. Golden Pussy F2 has been topped too and it went perfectly as you can see in the pictures. The plants continue to grow out of all proportion!
Likes
4
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent
Likes
17
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme. Rabattcode für den BIOTABS-Webshop https://biotabs.nl/en/shop/ GDBT420, damit erhalten Sie 15 Prozent
Likes
17
Share
@Kirsten
Follow
16.2.25: I decided to check out the lower canopies of all plants to see if I need to get rid of any foliage. I did get rid of a few small branches and leaves. However, whilst I was doing this, I saw more garden pegs from my LST remaining. There were about 6 or more in Pink Mist alone. Additionally, on Watermelon, there were some left in, too. I'm so annoyed to see that because the plants are really stretching, and I could've potentially disrupted this by leaving the pegs in for all this time without realising it. 🤞 that I haven't compromised things too much. We'll see. I watered today with 2ltrs of dechlorinated water PH'd to 6.3 containing the following nutrients; ♡ .8g Green Leaf Nutrients PK booster ♡ .5g Ecothrive Biosys I ordered quite a few things for the garden. I got Greenleaf Nutrients Sea K(elp) and Mega Crop Parts A+B. To go with their PK Booster I got last month. I'm excited to try it all together. Next run, maybe just using these. We'll see how it goes. 18.2.25: The plants are going crazy for water! Everything is getting used right up so fast! Today, I decided to add some more Black Strap Molasses to add some carbs and other micronutrients. I'll add the jar with the label in the photos section above. I watered a very small amount to each plant. What I put in: ♡ Black strap molasses 150g ♡ 2g Sea K(elp) Greenleaf nutrients. I dissolved everything in 4ltrs of dechlorinated water PH'd to 6.4. 19.2.25: I received the majority of the garden purchases that I made. I'm still waiting for the Ecothrive Life Cycle. I wanted to top dress, but it's been delayed unfortunately. I am using my Greenleaf nutrients products which I bought on Amazon. I got the Mega Crop 2 part system Part A and Part B. I have the Sea K(elp), and the bud explosion PK booster. I really wanted to get some of their sweet candy asking read many positive reviews. Unfortunately, for me, this is unavailable to buy currently. So that's a little disappointing. I needed to do a good watering so when my nutes were delivered today, I got excited 🤗 I watered 2ltrs of dechlorinated water per plant, PH'd to 6.4, containing the following nutrients: ♡ 1g Mega Crop Part A ♡ 1g Mega Crop Part B ♡ .5g Sea K(elp). The plants drank this up within a few hours. I'm going to try and hold off on watering in hopes that my Ecothrive Life Cycle will arrive so I can top dress and water it in then. 20.2.25: My Ecothrive Life Cycle arrived yesterday, and the plants are ready for their top dress and a good watering in. I have some Biobizz Light Mix, Canna Coco,and perlite. I'm going to use this as a base to mix my amendments in. I'm going to fill my 5 gallon bucket with about 4.5 gallons of my top dress mix. I will distribute this across 6, 4-5 gallon pots. Then I will water in well with Greenleaf nutrients Mega Crop Parts A+B and Sea K(elp). I've made a crude attempt to video mixing my top dress. Don't listen to the audio. lol, my YouTube didn't stop playing whilst I recorded this 😂 So anyway, I added the following amendments to the above base mix of 4.5 gallons; ♡ 3 TBSP Ecothrive Life Cycle ♡ 3 TBSP Vitalink Bat Guano ♡ 3 TBSP Ecothrive Charge ♡ 1 TBSP RHS Mycorrhizal Fungi granules ♡ 6 TBSP Ground Cinnamon.
Likes
19
Share
These auto berry bombs are taking off quick will be throwing them in 3 gal buckets this weekend will update with week four by Monday with the growth I am getting off these my weeks will run 5 days this is the second time I have grown these autos I feel like I have The nutes where I want them and they are showing their love of the nutes
Likes
10
Share
normal and healthy plant for this week . i do little defoliation everyday
Likes
6
Share
Day in and exit fan 15 min off 15 min on Van is full on Night in and exit fan 30 min off 15 min on Van is full on
Likes
Comments
Share