The Grow Awards 2026 🏆
Likes
Comments
Share
@SantoZ420
Follow
The plants seem to be happy and actively growing after being transplanted into their final 5 gal pot
Likes
20
Share
@Hempcules
Follow
WEEK 14 I’m thrilled. The plants are developing beautifully. They’ve gained a good bit in height again, but the canopy has become exceptionally even and bushy. Thanks to the long training, many strong shoots have grown, and both plants have a massive stem and impressive root system. They’re slowly beginning to give off a light scent as well. A very sweet cannabis aroma is already noticeable. I believe this will become one of their key characteristics in the future. Due to their height, I had to remove my internal dehumidifier and now use it as an intake dehumidifier. That way, I’m also able to further reduce the humidity in my grow space. I only fertilized once this week because I repotted the plants into fresh Allmix a few weeks ago, so the soil is still very rich in nutrients. The leaves have a healthy color and the plants are generally in great condition. Next week, I’ll raise the VPD and begin fertilizing twice a week. Other than that, I’ll leave the plants to continue growing undisturbed and hope all my shoots soon develop fully into blossoms.
Likes
31
Share
NEW HEMPER DAB RIG UNBOXING! https://www.youtube.com/watch?v=OtbngkBE6yw Lots of @GlazedGrow content coming to the new YouTube channel: THRASHED TV 🙏 https://www.youtube.com/c/Christhrash Cannabis Content + Metal/Music + Interviews & more! Biggest yield yet! 75 grams of great, non-larf flower. Over 100 grams of pure frosted sugar leaves mostly from Plant One. The very classic sativa pheno + the lights and Advanced Nutes Big Bud + Overdrive. With the other plant in the Bruce Banner harvest: https://growdiaries.com/diaries/105959-grow-journal-by-glazedgrow The final bud weight is 103 grams, just 10 grams shy of a Quarter Pound 😱 + over 100grams of pure frosted sugar trim. Lights: @ViparSpectraLED XS1000 + P1500 -- Become a @ViparSpectraLED partner for testers and commission here: https://partners.viparspectra.com/create-account?ref=378 Worth the buy: https://www.viparspectra.com/?aff=378&utm_source=affiliate or use discount code GLAZEDGROW. IG: @GlazedGrow @Glazed_Grow @ChrissThrash @ThrashedShop YouTube: https://www.youtube.com/c/Christhrash Twitter: @GlazedTweets @GlazedGrow @ThrashedTV @ThrashedShop
Likes
8
Share
@Ninjabuds
Follow
Runtz from Zamnesia has been a strong grower along the way. When it was in veg it started with a little slow growth but this plant has a lot of euro genetics in it and it seems it would have loved higher light intensity durring veg so it would have stacked better. The buds are an interesting structure that’s why I think the plant was meant to be stacked the nugs army nice round balls there weird shaped like they were meant to be closer together to make long colas. There is potential with this plant just would need some more grows to dial it in to be grown at its pote
Likes
11
Share
@Bluemels
Follow
Tag 60: Die Chocolate Haze hat sich in der 1. Blütewoche schon enorm gestreckt 😱 Ich muss sie wohl toppen irgendwann, sonst ist sie zu dicht an der Lampe 😬 Tag 65: Ein letztes mal die Lampe höher gestellt. Die Chocolate Haze ist etwas aus der Form geraten 😬 muss bald noch was wegschneiden 😵
Likes
35
Share
@Kin_G
Follow
Not actually sure if end of week 5, I will check at some point maybe :P Removed 3 Hermies, will check think 1 wasn't random/"?". Pinched tops of pretty much all plants. Chopped the males up a bit, probably just remove them soon anyways, but some super early pollination would be okay I rate. Maybe try grow like, a carrot, pumpkin, between or where I removed males. Guess today I feed a lil bit and water well otherwise. About 700ml per plant now.
Likes
6
Share
@DG422
Follow
Es wächst und wächst. Langsam könnte mal die Blüte anfangen. Leider ist auch ein Ast durch das Eigengewicht abgebrochen. Seit dem sind alle dicken Äste mit Bambus gestützt
Likes
1
Share
WEEK 17-23 March. She's really too narrow now, I'm going to transfer her in a larger space very soon. In the meantimeI'm continuing with all the techniques to make her stay down.
Likes
27
Share
5/23/2023 Week 7- Day 1 of Flower (Day 110 overall) (Day 49 of Flower) There was a couple of small super small sucker buds on the lower stocks that needed to be cleaned off but that was it. Just watching them Flower!! 5/24/2023 Week 7- Day 2 of Flower (Day 111 overall) Tucked a few fan leaves below lower buds but didn't see any blatant offenders that needed to be removed. I typically do start my checks in Week 8 but since this is a new strain I decided to go ahead and do a Trichome check just to see what was what.. Just as I thought nothing but clear glassy Trichomes. I will check again in one week.... 5/25/2023 Week 7- Day 3 of Flower (Day 112 overall) Just letting them grow today!! Smell is getting stronger I would say it is a hint of Pine and a heavier fruity smell. 5/26/2023 Week 7- Day 4 of Flower (Day 113 overall) I did Nothing but took some pics and I enjoyed it!!!! It is nice to be able to just sit back and watch them on auto pilot.. :-) Tomorrow Water Change Day!! 5/27/2023 Week 7- Day 5 of Flower (Day 114 overall) I admit it.. I had to defoliate a little bit.. I looked in while changing the water today and there were just a couple blatant offenders blocking the light from lower bud sites and those leaves they just had to go. Other than that I changed the water and this week is where I drop everything and start preparing them for this last phase of the grow. Loving a few of these buds they are starting to beef out very nicely. I added 36 gallons Mammoth Silica = .5Mil/Gal= 18Mil Root DRIP = 1Mil/Gal= 36Mil CalMag= .5Mil/Gal= 18Mil FloraMicro = 3.8Mil/Gal= 137Mil FloraGro= 2.8Mil/Gal= 100Mil FLoraBloom= 4.6Mil/Gal= 166Mil LiquidKoolBloom= 2.5Mil/Gal= 90Mil TPS SIGNAL= 4.0Mil/Gal= 144Mil ORCA = .5Mil/Gal= 18Mil Water Temp= 70.1 Tent Temp= 76 Humidity =64 ** I have two dehumidifiers running on Ink bird controllers to try and keep the humidity down, In late in flower I like to keep the humidity above 45 but below 60. 5/28/2023 Week 7- Day 6 of Flower (Day 115 overall) Opened the back of the tent today and boy did she need some defoliation love in the back. Other than that I took off a few little sucker buds trying to form. I did start to setup my Dry space as well as did a Trichome Check today and the brown tips are coming in nicely. 5/29/2023 Week 7- Day 7 of Flower (Day 116 overall) Found a few baby sucker buds trying to form so I removed them. Other than that I am enjoying watching her mature. I also started my Reverse of the Clone I took 6 weeks ago in Apr from #3. I am uploading footage of the reversing process for your viewing pleasure.
Likes
2
Share
29 macetas de 20-18 litros aproximadamente Dia 32 de Floracion Super Suelo Sin fertilizantes Apoyado con biortilizantes @bioinsumoschakrana Melaza Te de Bokashi Humato Postasico Potenciado @Knactive Knactive el mejor bioestimulante 100% orgánico para todo tipo de plantas , el cual activa la autodefensa contra el estrés oxidativo y potencia la síntesis interna de todas las fitohormonas. https://instagram.com/knactive_?igshid=MzRlODBiNWFlZA== Vital Juice Es un producto Chileno hecho en base a algas: durvillaea antarctica y ascophyllum nodosum.
Likes
6
Share
7.14.25 Harvest finally here! It’s been a slow grow like waking in quicksand! Quality buds but quantity was diminished by bad growing error in vegetative stage! Thank you for looking at harvest! Be back in a month or 2 with new grow!
Likes
20
Share
These girls been growing up Amazingly. They are now in flush mold until harvest
Likes
12
Share
@Krissci
Follow
This week seems to be bulk week. Under the microscope it look like the Amber trichomes would be here. But not yet. I'm not fussed😎.. More weight is a good thing. Flawless finish is going to be used for the 1st time
Likes
12
Share
This is there and last strain from this grow So Anesthesia is really Strong Strain 🏆 indica dominant
Processing
Likes
17
Share
1/14: All 3 are looking great! This morning, I did a foliar application of big bloom and fulvic acid, then about 5 hours later I watered them with about a half-gallon of rainwater each and added armor si, humic acid, endoboost myco/tricho, liquid molasses, and a bunch of cal-mag. Today, I also I wired up and mounted my new samsung sun board strips (660nm/730nm) and my Solacure FlowerPower UVB fixture. I'm running the deep red/far red bud boosters a few hours per day right now, but will run them for the entire photoperiod once I start flowering them. I'll run the UVB for 4 * 15-minute sessions a day for the full flowering cycle, and if they don't protest too much I'll increase each session by 5 minutes and evaluate again. Some strains are more forgiving than others and I've got 5 different strains in this space...so really not sure much time I'll get away with exposing them to the deadly rays without damaging them too much...😈 1/15: I received one of the rapid led/growmau far red initiator pucks today. With the placement of my UVB light, I'm realizing I'll need another far red puck to have even and intense far red coverage, so I'm ordering another with Prime delivery and waiting to start flowering until I receive it. I sprayed them down really well with ph adjusted rainwater tonight to rinse off nutrient build-up from foliar applications. 1/16: I'm really excited to try flowering under 14/10. I grew photos indoors on an off for 15 years before I semi-retired. If I added up all the additional flowering time I could have done through the years if LED technology existed, I'd have had an extra truckload of bud to smoke. I did another application of Axiom Harpin a|b Proteins this evening, right before dark. I'm expecting a big growth burst this week, leading up to the flower stretch. I really need them to trigger under 14/10 within 4 or 5 days🙏 ...if not, I'll switch to 13/11 and wait a few more days🙏😟..if still no pistils are poppin, I'll go to 12/12 and chalk it up as bad luck or varietal indifference to Pr and Pfr manipulation. 1/17: I fed each of them about 3/4 gallon of full strength veg nutes. This will be the last. I'll go with half-strength veg and half-strength bloom for a week, then go with full strength bloom nutrients until I start flushing them in 6-8 weeks. 1/18: I installed the second far-red flowering initiator today and got all my timers configured for flowering: ========================================= timer#1 - power strip with qb's and red boosters 10:00am -12:00am timer#2 - (dual/independent setting) sideA- 3-way cube with uva bars 10am - 3pm 7pm - 11pm sideB- flowerpower uvb 1pm - 1:15pm 4pm - 4:15pm 7pm - 7:15pm 11pm - 11:15pm timer#3 - far red pucks 11:00pm - 12:15am timer#4 - sub-canopy tube 10am - 1pm 3pm - 6pm 8pm - 11pm ======================================== I also did some testing on the timers and sealed myself into the closet to check for any light leaks. All good.👌 1/19: Tonight is their first long night. It's ON!👍 1/20: I watered them today with about a half gallon each. I'm seeing calcium and magnesium deficiencies here and there, so added some boomerang and heavy cal-mag-Fe along with liquid molasses, humic acid, and endoboost myco. I also foliar fed with big bloom and fulvic acid. That's it for week 4-
Likes
6
Share
@VeeDro203
Follow
Currently everything running in a 4x4 The Lemonade LINE The Wolf grow a bit stretchy. Both of them. One of the Candy Candy strains a bit shorter than the sister
Likes
14
Share
@Jcannaf
Follow
Very nice, can’t wait for it to cure fully
Likes
52
Share
@DevilsBud
Follow
New week for the 2 purple berry Kush I think the purple berry Kush needs couple days more then the rest but it's going great there at a size that adding extra nutrients is waste and only making flushing take longer so starting to lower all nutrients and preparing for last week exited times Happy growings Growmies 🤜🏻 🤛🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter
Likes
3
Share
@Trinidad
Follow
20.06 25. Day 30 Took some leaves off lower part of plant. Used plant training clips to bend branches in effort to LST. I will update tomorrow. One love 🏼