06/06/23 Topping White Widow A B C and D 07/06/23 Defo, LST Pheno C 08 - 14 May 2023 - Germination Week 15 - 21 May 2023 - Veg week 1 22 - 28 May 2023 - Veg week 2 29 - 04 June 2023 - Veg week 3 05 - 11 June 2023 - Veg week 4 12 - 18 June 2023 - Veg week 5 - Final Veg 19 - 25 june 2023 - Flowering week 1 26 - 2 july 2023 - Flowering week 2

***Sponsored Grow*** = Medic || https://medicgrow.com || Grow = ***Sponsored Grow*** Been a bit since I posted to these diaries, Lost track of time with work and personal events but the harvest did happen and this was the week just before it all went down. Till next week. ***Sponsored Grow*** Official Website: https://medicgrow.com/ + https://www.kannabia.com/en Facebook: https://www.facebook.com/medicgrowled + https://www.facebook.com/kannabiaseed/ Twitter: https://twitter.com/medicgrow + https://twitter.com/kannabiaseeds Instagram: https://www.instagram.com/medicgrow420/ + https://www.instagram.com/kannabiaseedsint YouTube: https://www.youtube.com/channel/UCNmiY4F9z94u-8eGj7R1CSQ + https://www.youtube.com/c/KannabiaSeedCompany Growdiaries: https://growdiaries.com/grower/medicgrowled https://growdiaries.com/grow-lights/medic-grow + https://growdiaries.com/grower/kannabia https://growdiaries.com/seedbank/kannabia

Have been clearing out a lot leaves and branches, decided to just LST on one plant and Fiming on the other one. And training have been applied to all plants.

Week 6 . These ladies have certainly got with it this week and all been busy root building. They have all hit the bottoms with ice thick roots , ready for all that food coming. The Gorilla Glue#4 has been pushing so many new growth tips it will be sad to strip them out again Wedding cake is similar with a lot of height gains ( but encouraged to stay low again with some stem bending and bruising/crushing. This should make it easier to bend them once in the nft trays. her growth tips are numerous now too. Ghost of is another matter altogether, she has been struggling to catch up and now has at least drawn level with a recent newer growing. I have ow stripped it back to the 3rs and 4th node but oddly there were no real paired nodes. She seems to be growing more like a clone at this point???. I know once they hit the nft pace they will fly so I am hoping to flip them at about week 8 so I can keep them managable during their stretch. Have a great week Growmies.

This week or a bit more was absolutely fucked up. Heavy rain and cold strong winds every day, but it is getting better now. Plants keep growing taller, except for White Whidow, which is the only one whos flowering well at the moment.

This week is almost the same as last week. Did some LST and Defoliation. Got rid of some stuff close to the plants so now they have more space. They started to smell so I have to buy some other plants as well like the Jasminum polyanthum, because I don't want any complaining neighbours.

CANADA DAY UPDATE🇨🇦 THE TRAGICALLY HIP🤘🥁🎸🇨🇦 MY SAYING NOW IS: THE ONLY WAY TO GROW IS WITH THE HYDRO🤘 AND REACH FOR THE STARS WITH MARS🤘🤣. So it's been almost a week under the new MARS HYDRO FC4800 and the girls are loving it.. leaves were straight up like they were at a rock concert just blowing in the wind waving their arms like they are in the moshpit🤣🤣 looked so sweet👍. after a day they have stretched so much I had to raise the light already to keep it at 14 inches above the canopy. Plants grow so uniform under these lights, canopy is always nice and even👍. it has a whiter light than the mars tsw2000. Being side by side in my 8x8 tent, I can really see the difference in the color of light. The FC4800 is more of a white light like natural light. I think it might be the blue uv Diodes they added to the fc series lights. I'm amazed at how good this light is already. Barely any heat comes off it. I can rest my hand on it when the dimmer is at 100% and it's just warm. I have it daisy chained to my TSW2000 and it works awesome👍 and I dont have to reach for the other dimmer to do both. One dimmer controls both lights. When I add more lights I will daisy chain them too and control 4 lights from 1 dimmer👍. I still love my tsw2000. It's been going almost non stop since I got it and no issues at all. I take a picture of the Diodes to see if any have burnt out or anything, everything is fine.  same thing with the heat it gives off is just like the FC4800. I can rest my hand on it without burning me👍. Having both lights on 100% because I in flower now, only raises my temperature about 3°celcius. Make sure you got some calmag and if you use reverse osmosis water (bottled water) or filtered water you will want extra calmag because it's filtered out of it👍. These lights are perfect for every stage of growth for germination to flower. Just use the dimmers to reduce the intensity of the lights for whatever stage you are in. Plus they are easy to raise and lower them with the ratchet straps. MARS HYDRO'S recommended height for different stages is pretty accurate but different strains like different Temps and light sensitivity so that's something to look into, a more Mediterranean strain can take more heat and intense lighting. and you can just follow their recommendations for the height for each stage. I slowly turn it up in the later veg cycle until I'm at 75% about a week before I switch to 12/12 and after about 4 or 5 days into flower I'm at 100% with no heat or light stress👍. Mars hydro is awesome for their pricing for what you get👍. They should cost alot more than other brands but shhhhh don't tell them🤣🤣🤣🤣. Just kidding. they want to stay competitive with every brand but there stuff is always cheaper than SF and vipar etc. They know once you use mars hydro products you won't switch to another brand. Why pay more money for something that isn't as good. I've seen lights cheaper than mars but they are cheaper for a reason. They are built cheaper. My TSW2000 is fairly heavy too. But when it comes to getting lights you want some weight to it so you know it's built strong and sturdy and will last a long time.. I called customer service a few times and they will help you out with any questions you may have about the products and they are very well educated in their products👍 very helpful and very friendly. They are awesome 🤜🤛. I can't say enough about this grow tent too. The thing is a beast. I could use the canvas tent to make a trampoline and i doubt it would break its that thick👍 I've had some cheaper tents made of 600d canvas and they aren't that bad. But when you get a tent made from 1680D canvas material it's insane how strong and heavy it is. Before I put the tent together when I lifted the canvas to start wrapping the frame I said to myself.. LORD TUNDERIN JESUS this has some nice weight to it. It was the easiest tent to put together that I've ever had. I went inside with the lights off and got someone to turn it on after a minute or two to look for light leaks and there was none👍. It even blocks out some noise, so if your fans or filters are loud, once it is zipped up it gets quieter. this tent is awesome with So many ports and vents for whatever you need to hook up to it. It has frame bars down the middle and one vertical pole in the middle to keep it sturdy but the poles are made nice and so thick that they probably didn't even need a vertical bar in the middle. It has 2 separate 4x8 floor trays that divide it into 2 4x8 tents. All you need is a mylar divider to easily divide it in half. I love the stickers it comes with. It's nothing big to some people but I know there is lots of people that like them because you see them everywhere in people's tents and in pictures. I love them they are super cool stickers👍. It really locks in the light and temperature and humidity good. Lots of room for all the equipment I have to go in it and will get to put in it. Be good to bring camping too🤣🤣🤣🤜🤛. Thanks for stopping by and taking the time to read this and please leave a comment 🙏🤜🤛 if you have any questions about any of the products I use please feel free to ask me and I can help you out👍🤜🤛 I also know about all their other products too, so any questions about stuff I'm not using I can still help you guys out🤘 and ask about pricing if you're interested in anything and I'll see what kind of deals I can hook you up with. But don't just buy stuff.. let me know so I can talk to my friends at mars hydro and probably get you a better deal👍🤜🤛 https://www.mars-hydro.com Promo code: Rocknroll @marshydropenny Here's some more information about these products I'm using: The goal of MarsHydro is simply to produce the best value grow tents in the  growing field and they didn't disappoint me at all. I'm beyond satisfied with everything. And with the most up to date hydroponic equipment at the lowest prices possible. Their grow tents have combined all their engineers and customers' advice to produce these unbelievable tents.. they really listen to us and change things to our liking so if you own anything from mars just contact them and let them know.. they take our advice and considerations VERY SERIOUSLY so don't hesitate to let them know 💪🤜🤛 The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 https://www.mars-hydro.com/ Promo code: rocknroll @marshydropenny GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! https://www.mars-hydro.com         PROMO CODE: rocknroll @marshydropenny Happy growing to all my friends 🤜🤛

***English version*** Welcome to Week 4 of Flowering! 🥦🥦🥦🥦 Hey everyone! The fourth week of flowering has begun, and it looks like the stretch phase already wrapped up last week. There hasn’t been much vertical growth—Runtz A now stands at 48 cm, while Runtz B has reached 59 cm. Today, I didn’t do a full defoliation but simply removed a few larger, obstructive fan leaves. The buds are visibly increasing in size, and Runtz B is leading the way with impressive speed. She seems to be about three days ahead in development compared to Runtz A. One of this week’s highlights is the incredibly intense aroma filling the entire tent. The sweet notes remind me of a mix of ripe tropical fruits and berries—absolutely irresistible! Although the two plants have some visual differences, I’m now convinced they share the same phenotype. Everything is going according to plan, and I’m excited to see how the buds continue to develop in the coming weeks. Until the next update—happy growing! 🌱 ***Deutsche Version*** Willkommen zur vierten Woche der Blüte🥦🥦🥦🥦 Hallo zusammen! Die vierte Blütewoche hat begonnen, und es scheint, als wäre der Stretch bereits letzte Woche abgeschlossen gewesen. Viel Höhenwachstum gab es jedenfalls nicht mehr: Runtz A misst nun 48 cm und Runtz B 59 cm. Heute habe ich keine vollständige Entlaubung durchgeführt, sondern lediglich einige größere, störende Blätter entfernt. Die Buds nehmen nun sichtbar an Größe zu, und besonders Runtz B legt ein beeindruckendes Tempo vor. Sie scheint in ihrer Entwicklung etwa drei Tage weiter zu sein als Runtz A. Ein weiteres Highlight dieser Woche ist der unglaublich intensive Duft, der das gesamte Zelt erfüllt. Die süßlichen Noten erinnern an eine Mischung aus reifem tropischen Obst und Beeren, einfach unwiderstehlich! Obwohl sich beide Pflanzen äußerlich unterscheiden, bin ich mittlerweile überzeugt, dass sie denselben Phänotyp besitzen. Alles in allem läuft alles nach Plan, und ich bin gespannt, wie sich die Blüten in den kommenden Wochen weiterentwickeln. Bis zum nächsten Update – happy growing! 🌱

I might switch the lights in the next days. Depending on her growth. Day44: Added some water and moved the camera a little further away. Day45: She felt lonely, so I got her a friend... Theobroma Cacao. New seedling that needs the warmth + humidity. Hopefully surviving winter. Day46: I decided to take some zoomed in stills of her. To show off her beauty. The purpling of the branches really make this lady something special. In some of the shots it might look like her leaves are yellowing, but it's just the angle of the light. You can see on the photo that I took from the top, that all leaves are a healthy dark green. At least I now have proof that she's a lady. She's short and stubby, but I'm not really growing for amount. I just neeed 50g, after all (hehe) Day47: She grew like a demon overnight. I'll check the height tomorrow.

Vamos familia, actualizamos la primera semana de floración de estas Gelato 44 de RoyalQueenSeeds. La temperatura que estuvo entre los 24-26 grados y humedad dentro de los rangos correctos. Cambiamos esta semana el ciclo 12 horas luz, 12 oscuridad, estiraron bien y ensancharon bastante también, el color es verde sano. Se nota que los nutrientes de la marca Agrobeta hacen sus funciones. - os dejo por aquí un CÓDIGO: Eldruida Descuento para la tienda de MARS HYDRO. https://www.mars-hydro.com Hasta aquí todo, Buenos humos 💨💨💨

Junto a otra hermana irán al aire libre, 2 indoor, 2 en exterior. Son mis primeras plantas de SWEETSEEDS. Espero que me salgan, como se ven en diferentes pag de las webs.

Respect for all of you, brother farmers! masters and beginners! thank you again for gathering on the pages of my diaries! we carry out our work with dedication and live on ambition! This will be the last week of feeding before moving on to rinsing the roots in the soil One of the girls is developing artichokes on the tops... nothing but gems😉😄😋💕

For some reason it's say 9 weeks flower. But it's only 4 weeks flower. Lol. Going well I guess for a 1st grow. Looking nice n frosty at 4 weeks.. Got a alien in the corner lol which knocked me.. Turns out to be a different strain.. 5 n half foot monster.. N still going up.. Have enjoyed this 1st 1 and hope to do more. Has any 1.got n ideas for next. 1 myt try autos. Are they easy to grow? Is is it best to stay away from them.. Happy growing ppl

week 3, at day 21 I started to defoliate. needs more airflow around colas. This is the start of defol, will clean and prune as needed next week. Stretching has slowed and colas are starting to stack. Ran a sort of modified manafold into the scrog. "V" on the left has 15 tops from 4 main stalks, she was topped to 4th node early on. "Blue nemo" was topped to the 3rd node early, she has 18 tops after the week 3 prune of the week lowers who couldnt make it up to the canopy. I left some popcorn buds down low that have began to develop, will throw these in the ice water hash after harvest.

Hello again, Like I said on my other diary, we are on the last week of Flushing this beauty too! And considering the damage she went through i cannot wait to smoke her. Ca8se simply didn't think she would pull through. Fingers crossed on this final strech Peace ✌️ ☮️ and love growmies

Blessed and very happy so

Fantastic classic strain that I'll be growing this again, I've grown her 2 times in the past, love to see those Heavy indica leaves, gorgeous plant, didn't really stretched too much if you compare with the rest of the plants of this season, very discreet plant to grow outdoors, heavy producer that it's great to train and make a relatively short bush full of fat colas everywhere!

I guess we’ll call this the start of veg since all 4 plants are showing their starter leaves. So far so good with the front loaded soil. Keeping a close eye on them for now. Also decided to keep feeding RO water for a couple more days and then I’ll start to mix in the tap water. The demand for CalMag is low right now and my soil is already pre amended. Day5 update: not much to report, just water and wait. Bumped up the lights a bit to around 230ppfd and 12.1 DLI. That’s going off cocoforcannabis website par tests on the sf-7000. I am running the seedling mode for more blue light so not 100% sure the math is spot on, but should be close. I’m at 28” as well not the 25” they test on so that adds a variable of error.

Hello everyone! I promised to track this grow very closely this time and ufortunately life got in the way. Here is a quick sumup of the grow. First of all- One of the sour stomper plants unfortunately didn't make it. It died at about week 4. The main stem somehow had rubbed/broken down. That's why it was falling down. It was almost like a mini beaver had chewed it off at the point where the stem touches the riot rooter. At first I thought nothing much of it, maybe it hasn't been rooted in quite well yet or something. And I was constantly touiching it when watering, that made it worse. Soo the leaves were dropping and the plant looked very weak. Then I decided cut thr rapid rooters top layer and found out the severity of the problem. Tried to tape it up and other things, but it was too late. At the end it appeared all good as the remaing plants got so big the I had some space issue so I wouldn't have been able to fit another plant in anyway. At that time I finally made my self-draining saucers. I took me a while and a lot of effort, but finally they were ready and working well. I also installed the self watering system and flowering was starting. Pretty soon I started noticing weird leaf symtoms. Brown spots, different kind. Some plants had it more, some less. Sour Stomper looked pretty good throughout the grow. Mango smiles seemed sensitive and Strawberry Nuggs were pretty strong until the end. The grow was basically me experimenting with the setup- changing watering schedules , changing ppm, ph and all that stuff to keep the leaves looking healthy and it was very hard I have to admit. Probably my hardest grow in that regard. But somehow, the bud leaves remained healthy and the buds really fattened up good. I got away with an amzing 700G dry bud harvest which was def a new record from one grow. And the bud quality is very good too! Next time definetly no more than 4 plants as they got pretty big and I thought it was a little overcrowded. I was doing some good defoliation too. I should have defolited strawberry nugs more tho. Sour Stomper got some amazing bud development from top to bottom because it was was growing next to strawberry nuggets which were really small most of the grow. They actually took the most time to harvest even longer than Mango smile. Mango smiles were ready quite early. Sour Stomper was just in time! I topped sour stomper and both Mangoi smiles, left SNs both normal. Looking back at it, the way I grow them, Should have topped SNs too. Would probably have more space in the middle and longer side branches. Probably wouldn't have been as bushy! I followed the full Terra aquatica feed chart until the end. I was supplementing with CalMag a lot as I thought the symptoms could have been from a CalMag deficiency as this was my first grow with RO water. Overall a very challenging but good grow at the end. First time no mold problems. A record breaking yield for me. Basically surpassed the upper limit for all plant probable harvest sizes. Got good smelling quality bud. Very happy overall and will continue experimenting with Mephisto beans in the future for sure! I guess what I like the most about Mephisto is how close to description the plant is, very stable genes in that regard. Next time I will also have to start feeding plants higher PPM feed faster at the very start. and during flowering. But still not 100% sure what caused the leaf symptoms.