Apple burger seed to harvest
Early harvest, I should’ve left her for 2/3 more weeks.
FastBuds AutoCob Grow
mheat
@mheat
Follow
Added a little molasses to water. Some heat issues but nothing crazy.
Blueberry OG - Outdoor
This one is going outside. It's a regular photoperiod seed, I'm hoping it's a female for some long awaited & needed flower. This was the very first strain I ever ran out of several years ago, I'm ready to have this back in stock 💜. I remember it being very relaxing, dissolving my migraine & putting me in a relaxed but great mood.
Fast Buds Mystery photo
DOS SI DOS 33#
Qutro
@Qutro
Follow
Hi Growmies, This girls are just amazing, they are growing beautifully and from this week asking for more food, there leaf structure is typical hybrid, they are beautiful in all ways.🌞🌱 Last week’s under watering shows some phosphorus deficiency in one lady so we will take more care of her from now. Watering in every third day with 3 litres each. Running the light on 100% brightness. Just rearranged them under the scrog net and while doing all this i got full sticky all over me from fingers to arm so can’t complain about resin production haha.👨‍🌾🏻 There sweet and herbal smell with pungent funkiness is lovely and it will just increase for sure in the next week and I can’t wait. Vpd:1,26-1,39kpa Par: 780-1070ppfd Thanks for stopping by and have a lovely week fellow gardeners!🍪😎 Peace ✌️🏻
2023 Malta punch
rkomaaa
@rkomaaa
Follow
It's been an exciting journey training my plants, and I'm happy with the progress they've made. I've been implementing various training techniques to encourage healthy growth and maximize yields. The plants have responded positively to the training, and I'm hopeful that they will continue to thrive and develop as planned. Fingers crossed for a successful outcome!
White Runtz X Spritzer
In der zweiten Blütewoche schalten die beiden Dancing-Sprite-Pflanzen von Seeds of Anarchy endgültig auf volle Blütenproduktion um. Der Höhenstretch verlangsamt sich spürbar, während sich der geringere Lampenabstand voll bezahlt macht: Die Internodienabstände sind wunderbar kompakt geblieben und die Triebspitzen richten sich gleichmäßig unter den LED-Leisten aus. An sämtlichen Nodien bilden sich dichte Büschel schneeweißer Stigmen, und die ersten kleinen Bud-Ansätze formieren sich bereits zu sauberen Kronen. Das Laubwerk der beiden Schönheiten zeigt eine gesunde, tiefgrüne Vitalität mit dezent rötlichen Blattstielen, der Nährstoffhaushalt ist perfekt ausbalanciert und das Duo geht mit maximaler Energie in die beginnende Massephase.
Bluebery PHOTO
Yaprak temizliği bitkiyi strese sokmadan yapıldı . Birbirinden ayrılan dalların çogu şekil aldıgı için bitkiyi rahat bıraktım scroge cıkardım sıcaklık 28 nem 40 civarlarında . Yapraklar gozlenerek gübreleme yapılıyor pistiller gözüktü.
Cherry Cola Fast Buds
Week 11 Cherry Cola. Watering 0.6 L morning and night. Buds are thickening up nicely. Looking forward to harvest!
Pheno hunt
Amended soil with 2 weeks worth of Gaia Green to get them through veg their veg period.
Bubblegun Powerd by Medicgrow SpectrumX
Once again, I welcome you back to my summer grow🙂💚 Still adding more bloom and PK boost to the nutrients mix and also bumping up the light a bit 😎🤙🏻 This one is hungy compared to the others in the tent, one this one is showing signs, but I´ll try to fix it asap. I started to add UV/IR for one hour a day, mainly before lights go out 🙂 Happy growing y’all 💚 ------------------------------------------------------------------------------------------------------- SpectrumX LED🔥 @medicgrow 880 Watt⚡️ 2x UV/IR LED panels 💥 2.7 μmol/J🔥 Full Spectrum V1,F1,VS,FS🌈 Display with PPFD & Live spectrum Light measurement: Apogee MQ-610 & Apogee DLI-600. Fertiliser: Organics Nutrients https://www.organicsnutrients.com/en/ Green Buzz Nutrients Discount Code: GD42025 Grants 25% with a minimum Order value at 75 Euro. https://greenbuzzliquids.com/en/shop/
Baked In Paris & In-Z-Air | PerfectTree
This one was Baked in Paris by PerfectTreeSeeds, grown with GreenPlanetNutrients only! Check the other weeks to see the ones with AptusPlantTech! Great zkittles terpz, awesome structure, beautiful colours. So, this is the one I liked the most since day one, love her colours, her structure and her smell, but precisely because of that I was too excited to harvest her that I forgot to take proper photos so I leave the ones of her last days .. Will try to update soon with some pictures of her on the drying screen ahah
Apples & Bananas / Lemon Zkittle Coco
Moin moin, Die Blüte schreitet voran und viel Arbeit gab es nicht. Die Lemon Zkittle ist riecht top, ist aber winzig und die buds entwickeln sich auch nicht so gut wie erwartet. Die Apples and Bananas hat einen starken Geruch entwickelt den ich aber schwer zu beschrieben finde, als ersten wirkt der Geruch skunkig wird aber schnell von einer süßen leicht erdigen Aroma abgelöst.
shorts_status_processing
Super Silver Haze
Max1973
@Max1973
Follow
Day 35 - few pics and vids..... everything going along nicely 👍 This is a pretty big update, so i'll add to it over the next few days, as i finish building it all.... i'm building these 2 x SS haze, the full tent, just finishing up the setup..... trimming them, changing solutions to 12/12 and flower..... changed the exhaust fan and filter setup to the better outside the tent method.... and installed 12v CPU computer fan, lol ("alta9" fits in 4in ducting perfectly), drops wattage on extractor fan.... 10w tops... got a few kg of active carbon and making/replacing the carbon filter .... i'll add afew vids of the new setup in afew days... Day 36 - few pics/vid of new tent setup...... "alta 9" fan :) post tomorrow after i finish trimmin and settin up night mode etc...... and into tomorrow we go, lol ... Day 37.... slowly getting there..... little bit more to go... this should make things abit more interesting..... right tank (short babie) has : 19 lts of tap water @18oC + 150 ml -dutch master one gold FLOWER.... 6.4 PH - 1400 PPM left tank has : 19 lts of tap water @18oC + 50 ml of elements a and 50ml of b and 10 ml of nitro and 20ml of Crystalic (molasses/pot) .... 6.5 PH - 1200 PPM more pics / vids of the finished tent setup.... roots, transfer, etc... Day 37 is alot of vids of the clean and change to flower..... edit - day after build noticed left tank (nutrifield) not enough bubbles..... pulled out the 4 air pump and swapped to the 2 x original oxipumps... much better, also to fix the problem with ph goin high, and bubbles not stirin the mix, was to add another 10ml of crystallic and another 5ml of nitro... then pumped both tanks with ph down and set em to 5.8-6.2 - both plants have fully recovered from the big trim, and bounced back within 12-24hrs, post pics/vid in abit..... Day 39 - made a freaky video... was curious about what the plants would see looking up at the lights... the lights and buzzing of air compressors and bubbling tank water, and dazzling lights turned out pretty cool in vid editor, was in selfie mode.... and final vid of the bounceback from trim :) 👍😎
shorts_status_processing
Avtomat Kalashnikov
**Encontrarás la traducción a español al final de la descripción** If you like this week, please hit a like, it costs you nothing! 👊. Thanks in advance 😉! From/Desde: 19/08/19 || To/Hasta: 25/08/19 From day/Desde día: 28 || To day/Hasta día: 34 -----IMAGES & VIDEOS----- P5 - I'm loving this photo, is the first complete cool photo of the AK i've taken. With the structure, the fixing rods with the same length as the diameter of the AirPot, and those beauty rubbered green cables 😍. P8 - I'm feeling that those branches looks too weak, and slim for what's coming. From next week i will use Rinho Skin to see if it can help them to get fat in upcoming weeks and before flora time. I'm also minding to create some branch supports with the 3d printer that will be placed on the LST structure, I need to twist my mind a bit with it. -----WEEK SUMMARY----- Another super heat week. While at home i'm at 34~36º in the street things are worse :(. Also humidity fluctuate from 50~65º. At last I removed those ugly & dangerous cables from the branches and used a rubber covered one. For now i only need to fix her in 4 points, 1 per each main branch, as you can see, at about 13 cm of the main branch. Later i will fix her with another 2 points per branch, one in the border of the pot from inside, and the last one also in the pot's border but outside. This week i removed the first horizontal internode on each main branch, and also removed the branch that grows vertically down from the second internode leaving in place the one that grows totally up. At the end of the week i will fix the SCROG mesh, but it's not going to be permanent until later, or maybe not at all due to dark photography, as if i place the mesh i will not be able to move the plant (i need to think about it). For now, I just need it 3 or 4 days to test it as i never placed this 60x60 mesh before, and also i had to cut the central rods for the mesh. About Alice K. she's growing beauty and healthy, some week ago i found a little white spider that i killed, @time (week 7) I didn't noticed any insect signs more. Also remark that she's standing well those temperatures and some days of very low humidity some hours 35% inside the tent. And also the equitative distribution she's developing. As i said on previous week, i will kill those clones at mid week as i'm going to plant 4 more seeds in a week, and all is going to be too much work 😞to compatibilize it well with my job. -----WATERING CALENDAR----- 23/08/19 (Day 32) - 3,000 ml with all week nutrients @ 1.1 E.C. PH5.8 *****ESPAÑOL***** Por favor, si te gusta esta semana dale un like, no te cuesta nada 👊. ¡Gracias por adelantado 😉! -----IMÁGENES & VÍDEOS----- P5 - Me encanta esta foto, es la primera foto completa guay que hago de la AK. Con la estructura, las barras de aluminio de la medida del tiesto y esos cables cubiertos de goma verde, me empieza a encantar el aspecto de la planta 😍 P8 - Tengo la impresión de que las ramas son demasiado endebles y finas para lo que está por venir. A partir de la semana que viene, usaré Rinho Skin para ver si las puedo ayudar con el engorde antes de que llegue el tiempo de floración. También estoy pensando en crear unos soportes para las ramas con al impresora 3D que irían enganchados a la estructura para LST, necesito darle unas cuantas vueltas a esto último. -----SUMARIO SEMANAL----- Otra semana super calurosa. Mientras que en casa estoy entre los 34~36º en las calles la cosa es mucho peor. También la humedad está un poco loca ya que a diario me fluctua en casa del 50~65º. Al final he quitado esos cables feos y peligrosos de las ramas y he usado un cable con goma en condiciones. Por el momento sólo he tenido que atar la planta a 4 puntos, 1 en cada rama que he dejado, como se puede ver a unos 13 cm del tallo principal. Más adelante usaré otros dos puntos de fijado en el borde del tiesto, uno de ellos en la parte interior y otro por fuera del tiesto. Esta semana he quitado el primer nodo de cada rama y también la rama que crece hacia abajo del segundo nodo, dejando la rama que crece totalmente hacia arriba. Al final de la semana colocaré la malla de SCROG, pero no va a ser de manera permanente, por lo menos hasta más adelante. Voy a empezar a hacer fotografías de fondo oscuro, y el tener la red me va a imposibilitar la tarea ya que debo sacar la planta del armario para las sesiones (necesito pensar en ello). De momento la quiero montar 3 o 4 días para probarla ya que nunca la había montado antes y también tenía que cortar las barras horizontales para la malla. Sobre Alice K. está creciendo super bonita y sana, hace un par de semanas encontré y maté una arañita blanca (Requiescat In Pace), a día de hoy (semana 7) no he visto más signos de insectos. También debo remarcar lo equitativamente que está creciendo y lo bien que soporta las altas temperaturas y la escasa humedad, hay alguna vez que he mirado el higrómetro y estaba al 35% dentro del armario. Como dije en la semana anterior, mataré los clones a media semana, voy a plantar otras 4 semillas la semana que viene y va a ser demasiado curro 😞para compatibilizarlo con mi trabajo. -----CALENDARIO DE RIEGO----- 23/08/19 (Day 32) - 3.000 ml con todos los nutrientes semanales @ 1.1 E.C. PH5.8
Grape Ape F1
03.04. Day 64 Flower 40 Hallo Leute seid mir willkommen zu : GRAPE APE F1 die einem beim Riechen zum Niesen bringt. Es kribbelt wie Zitronensäure. Die muss sauer sein. Es gibt immer mehr Lila, auf jeder Traubenaffen F1 die so ca 2 Wochen in Blüte ist. Schick. Die Pflanzen an sich bleiben klein, kein Wachstum. Die Knospen schon 😍. Sie Pludern sich auf, strecken sich und werden bestimmt hart sein. Das habe ich nicht getestet, ich will ihre Entwicklung nicht stören. ❤️ Ich liebe Cannabis zu growen. Das macht so viel Spaß ( wenn es klappt ). Ich bin zwar Großmeister, und meine Knospen sind herrlich, aber meine Pflanzen sehen immer sehr mitgenommen aus. Hüstel(geheucheltes Husten, nur wegen der Dramatik) Wenn ich das kann, kannst du das auch. Es ist legal in Deutschland 3 Pflanzen zu haben. Ich würde sagen Grape Ape auf dem Balkon geht voll klar. Gute Erde dazu. Dünger wäre toll, ist aber kein muss. Die Nachbarn kriegen das auf jeden Fall nicht über den Geruch mit . 1. Dezent 2. Weintrauben 3. Klein Nur so als Gedanke. Ich freue mich jedenfalls über ihr Aussehen ( für mich, nicht schlecht ), und diesen Geruch. So Sauer+Trauben+weed. Ich glaube das ist ne richtige Hardcore INDICA. 😳 Steht ja auch so in der Beschreibung.... 👍 04.04. das 65. Die erste Knospe ist wirklich fertig! 😳😍 Wow , das hätte ich nicht gedacht. Komplett milchig, die Hauptknospe. Mit Licht Gehampel, day 65 ab Keimung, 💪 stark. Natürlich, wer mich kennt, es gibt noch ein Paar Tage. 2 Gründe, mehr Gewicht, und ich hätte gerne ein wenig Amber Trichs. Aber sie riecht geil, ihre Knospen sind fest und klebrig. Ja, und dann kommen ja noch ihre F1 Schwestern. ? Also Wahnsinn. So Schnell. 07.04. dieses eine Blatt hat so krasse Farben. Leuchtend Radioaktiv. Was wird das für weed? So, genau ab jetzt hat sie mich. Die Grape Ape F1. Diese Farben sind 😍. Hat zwar etwas gedauert bis ich fan wurde, wegen wo ist sie denn ( sehr klein, die gröste bisher 47 cm. ) . Aber als sie die Farben änderte, und der Geruch dazu kam fand ich die Interessant. Ist wichtig, denn ich mag Cannabis als Pflanze sehr, da schnell und schön. Und im besten Fall, BUNT. Wie diese hier. Und ich bin gespannt welche Farben die anderen bekommen. Die sind zwar alle ähnlich, aber im Charakter unterschiedlich. Also, ich sage es gleich. Viel kommt da nicht runter. Wie denn auch, ist sehr klein. 21% THC Indica Style. Das geht nur mit kleinen Pflanzen. Indicas sind halt klein. Und schlagen hart zu. Wie Zwerge. Ich liebe Zwerge ( es sei denn ihr habt eine Audienz bei Hochlord von irgendwo. Ich glaube Zwerge sehen nur einmal in ihrem Leben Wasser. Bei der Geburt.👍 Leute ihr müsst die untern Tisch saufen. Nen Zwerg, das ist hart, dann könnt ihr in Baden, wenn er besinnungslos ist. ) Nur so als Tip.
Seedsman - Blueberry Pie F1 Fast Outdoor - Hugelkultur - Mainline
Arcadium
@Arcadium
Follow
Another cold wet week. Witnessed the spiderlings band together for a few days, web making at night. Then one day the wind picked up and they all disbanded, stretched out their silk and flew away all over my yard. It was such an incredible experience to watch! I should have an army of Orb weavers come flower time. Did another top dress of compost mixed with 70/30 Gaia Green AP/PB, maybe 20Tbsp. When I pulled back the mulch I got to see all the soil creatures and roots consuming the material, this really does help build extra root zone over time. Minor defoliating, I'm keeping nodes 1, removing 2 and final top at 3 (next week) to keep her spaced, then let her stretch and trellis. Should all help fill in the canopy.
M.a.c Muffin