Likes
Comments
Share
✂️ Harvest Day – Permanent Marker (Zamnesia) Cosecha de las fotodependientes. Ha llegado el momento de cosechar las Permanent Marker fotodependientes. Tras un final de floración largo y bien controlado, con lavados de raíces y una maduración sin prisas, se ha tomado la decisión de cortar en el punto exacto que buscaba para esta genética. Las plantas ya se encontraban a punto de caramelo desde hace varios días, pero se decidió esperar un poco más para aumentar el porcentaje de tricomas ámbar y terminar de redondear tanto el efecto como el perfil terpénico. 🔬 Motivo de la cosecha La decisión se ha basado en la observación directa de tricomas, no en el calendario: -Tricomas mayoritariamente lechosos. -Presencia clara de tricomas ámbar, especialmente en las flores superiores. -Pistilos prácticamente oxidados. -Cogollos completamente formados, densos y duros. +Aroma intenso y bien definido. En este punto, la planta ya no estaba produciendo masa floral nueva, sino afinando resina, terpenos y madurez, señal clara de que era el momento correcto para el corte. 🌿 Estado de las plantas en cosecha. Las Permanent Marker han llegado al final del ciclo: -Con lavado de raíces completado. -Sin signos de estrés. -Hojas perdiendo color de forma progresiva y natural. -Energía completamente enfocada en las flores. Todo indica que el cierre del cultivo se ha hecho de forma progresiva y controlada, respetando los tiempos de la genética. ✂️ Proceso de corte. La cosecha se ha realizado con calma, cuidando cada planta y evitando manipulaciones innecesarias para proteger la resina. A partir de aquí comienza una fase tan importante como el cultivo: el secado, donde se buscará conservar al máximo todo el trabajo realizado durante la floración. Muy satisfecho con el resultado de estas Permanent Marker y con cómo han llegado al final del ciclo 🌿🔥
Likes
37
Share
Another steady week! Some serious development of the terps is in the air! 😝 Again some good growth both vertically and filling out the canopy. Bud sites are popping up here and there which pleases me as it’s turning out great for my first effort with scrog and LST! I swapped out the Bestiva LED for a 150watt HID Mh lamp. Really considering putting in a 600watt for the last few weeks, what’s your opinions!?? As always, tips and criticism all welcome guys and gals! Much love to you all and all the best with your own grows 👌👍✌️🌱😎
Likes
42
Share
👉Alrighty Then👈 👉Apple And Banana 👈 So we had some real nice growth this , had to do a little leaf management👈 flower mode activated...... Everything is looking good 👍I'm using well water which is hard so I'm having a few issue but I'm on it .... So ive up'd the nutrients to accommodate pre flower ..... Soil by Promix Nutrients by Cronks Lights by MarsHydro.ca FC4800 X UR45 X Adlite Deep Red And Blue Tent 4x4x6.5 & Equipment by MarsHydro.ca High reflectivity inner mylar Thick Oxford fabric Smooth heavy duty zipper Sturdy metal frame Zipper blackout cloth Good anti light leakage performance The 6in Inline kicks ass moves alot of air ●Blue Light Effect: Blue light shortens internodes, resulting in shorter, stronger plants, ideal for supporting fruit development later. During vegetative growth, blue light promotes lateral branch development effectively. Well this should be fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈 Well this should be fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈
Likes
11
Share
Hello everyone, The amnesia fast is doing great, i just finished changing the water and nutrients. Tomorrow i going to give her a good defoliation and will update the diary with new pics and videos. Today i tasted the motherplant she is dry and curing wright now she doesn't taste like amnesia at all so this is probably the last time i grow her. Let's see how she looks next week. Thanks for stopping by and have a nice day. Growfather
Likes
4
Share
Plant is growing well. Transplanted them from a 1 gallon pot into a 3 gallon pot this week.
Processing
Likes
2
Share
@K8T80
Follow
It was quick to see the second pair of leaves! The stalk of the seedling is a bit thin.. waiting for it to thicken up. Using 60W lights
Likes
15
Share
@Zone6ix
Follow
Wasn't going to do any LTS but I did anyways! She's small but she's looking nice, I love all my girls the same :)
Likes
21
Share
@The_La
Follow
This week I changed a few elements, I changed my nutes to mills, I used mills on my last grow and had a really good result, I also like the fact that's it takes 1 week to flush, this is because it is made of organic and inorganic compounds and contains less salts. The only reason I didn't go with mills from the start was purely financial, canna is cheaper and doesn't require the expensive "start" additive like mills. The guy in my local shop swears by mills and gave me a bottle of c4 for free so I switched. I also added a greenhouse tube heater as my lights off temp was dropping to around 6c. I'm at 12c now and can live with that. My flowers are forming nicely with small spacing in between each node and I have been bending the branches down to encourage growth. This is going as planned and I'm loving this run 👊
Likes
86
Share
@yan402
Follow
Hi this is Apple fritter auto by Royal Queen No idea of the week as I have not been keeping track and the only updates will be pictures and a video once a week until harvest. Wish you all a successful grow.
Likes
5
Share
@Lazuli
Follow
Day 77: today i flushed her and then poured 8liters with ripen trough it
Likes
Comments
Share
Likes
2
Share
@Comfrey
Follow
Die Woche verging wie im Fluge. Purple Punch Auto glitzert in den Morgenstunden wunderschön und verströmt einen sehr angenehmen Duft. Momentan duftet diese hier von unseren vier Pflänzchen am stärksten. Die Blüten schwellen nach einem krassen Stretch an. Das intensive LST und das Entfernen störender Blätter hat dazu geführt, dass die Blüten sehr gleichmäßig Sonnenlicht bekommen und später in der Blüte die Luft gut zirkulieren kann. Zwei Tage der Woche standen die Pflanzen unter der Markise, es hat über Stunden heftig geregnet. Nachdem ich meine Grashüpfer letzte Woche umgesiedelt habe, der Fraß ging mir zu weit, sehen die nachwachsenden Pistillen wieder gut aus. Vorher wurden die von den Hüpfern gerne angeknabbert. Das Gießen läuft wie gewohnt nach Gefühl. An heißen Sonnentagen bis zu 1,5 Liter. Soweit die News von unserem Balkon, die nächsten Wochen werden vergehen und dann ist die erste Saison als Weed Gärtner auch schon wieder beendet.
Likes
2
Share
@PalmaGrow
Follow
22 - 28 septiembre En mitad de la 7ta semana de floración olor crítico delicioso El banco recomienda de 7 a 8 semanas esperaremos a observar su mejor punto sin pasarnos
Likes
6
Share
@MG2009
Follow
08/25/2019 And flowering begins! May have to finish inside.
Likes
32
Share
@Weediz
Follow
Day 64: It seems to go well. I am still keeping an eye on the "hanging" leaves. I think they tend to hang a little more when light on, and less with light off but its hard to say if it is normal. It might be as @GrowingGrannie mentioned, they might be under watered, as there is not much run-off at the last couple of watering's, maybe 1l each time and I will give them a 30% run-off next time to be sure UPDATE: I have noticed some more brown spots on the right plant caused by Calcium Deficiency. I think I should up the PH a bit more, going for 6.5 this time. I will also increase my CalMag supplement by 50%, and do 30% run-off today Day 66: Thank you all for the kind answers 🙏 You all have different opinions, and it is hard to pinpoint the exact problem. I am almost certain that I got some heat/light stress as mentioned by @GrowingGrannie and @Chow_13. I have therefore raised the lamp and are keeping the dimmer very low, using about 140W in total. I am still investigating if there might be other problems to it. @m0use, thank you for your answer. I do not think they are thirsty, at least not any more, as I am already on the subject for the last couple of days. About PH, It was difficult to get a good picture of the PH solution, but it was light-green to green (6.5-7.0) on the picture (And that was run-off PH) and what I put in was adjusted slowly from yellow to light-green aka 6.0-6.5 (I wrote 6.25 but it was auto adjusted) @gottagrowsometime, thank you for the answer. I do not think it is a nitrogen toxicity. My leaves aren't that dark green, although they are a bit to the dark side but not like what I see on other pictures with that problem. I also think the curling is caused by light/heat stress as I just got a new lamp and are experimenting with it. But I will keep your suggestion in the back of my head! @Chow_13, thank you very much for your answer. I think you are spot on, however I am not sure it is the only problem... It might be as you say, nutrients are not absorbed correctly due to the light-stress, but I will not put all my money on that @Nugsery and @GrowingGrannie, a big thank you for your answers. The deficiencies might not be the same, but the cure is very similar. I cannot make up who is right, but I do have a plan. I will follow your recommendation @GrowingGrannie and @Nugsery, and do a flush, but with a ph 5.8 as both nutrients should be able to be absorbed in that level. I will then give her a light nutrient mix and adding PK, also 5.8 ph. This is almost the same solution for both deficiencies. I will then slowly get the ph back to 6.2 @ernesttwwg, thank you for your answer. I have known for some time I have some Interveinal chlorosis, but I do not know what is causing it. There is multiple deficiencies giving those symptoms. The tacoing of leaves, and leaf tips curling down I think is caused by the light, and I have therefor raised the light. I will keep investigating the symptoms you mention OBS: I will not edit my nutrient schema as this is only temporarily, next watering will be as described UPDATE: After flushing with 15L~ ph 5.8~ and a small feed with 5.8~ ph I still get about 6.5~ ph in my run-off water. I am going to do another flush tomorrow to see I can bring it down to around 6.0~ ph Day 67: I think I see small improvements on the leaves. The new heat/light level seem to have done something. I did that second flush and are still getting about 6.5 ph in run-off.... I think I will let her dry for now, monitoring what happens, and do another flush in a couple of days
Likes
15
Share
@Waveform
Follow
Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.
Likes
Comments
Share
Week 9: Growth, Clones, and Preparing for Buds This week brought some important changes to the grow! The plants stretched significantly, taking advantage of the rainy weather, despite the temperature fluctuations. Overall, the conditions are supporting their development well. Notes: I made a few more clones, and so far, all of them are thriving. It's exciting to see a 100% survival rate for the clones so far. Out of the 12 plants, I identified three males. Two of them have started opening their pollen sacs, and I’ve begun collecting. The pollen is being stored in the freezer for future breeding projects. I did a light defoliation to improve light penetration to the lower branches, which should help promote even growth.
Likes
121
Share
Well growmies ive been looking forward to the FastBud Tester 2307 , the more she went into flower the more the frost would build up , and that's when the terps came out 👉 Sweet , fruity 👈 Buds are tight and full of frost 👈 Couldn't of asked for better Genetics 😉 The smell coming from this girl during the entire grow was just dreamy 👈. Of course I have no clue to what she is but I like it...... Maybe FASTBUDS attempt at a Watermelon 🍉 Strain???? Amazing Job FASTBUDS 👏 I would definitely recommend once they release this one 👍 👉 Big thanks to all my Growmies out there in GD land 👈 Much appreciated 🙏 Thanks To MarsHydro for the TS1000 👉I used NutriNPK for nutrients for my grows and welcome anyone to give them a try .👈 👉 www.nutrinpk.com 👈 NutriNPK Cal MAG 14-0-14👉 All Weeks NutriNPK Grow 28-14-14👉 Weeks 2 & 3 NutriNPK Bloom 8-20-30👉 Weeks 4 to 8 NutriNPK Bloom Booster 0-52-34👉 Weeks 4 & 9 👌👌
Processing
Likes
76
Share
MID-WEEK UPDATE: Gave the twins their second last feeding today. A few nights of 14-16 Hour Dark periods as well due to plans/not having timers but as I said before I think the longer Dark periods have really sped up the flower development. PURPLE IS STARTING! Some very nice purple is starting to come into the cals and sugar leaves 😈 Going to push some lower temps in week 8 to get as much colour out of them as possible. Arnold still heavy fan leaf fading. Ran straight water through the medium before todays feeding incase any build up nute locked it. Never fully bounced back from the last feed but also getting near the end. I have a feeling I'll pull Arnold first in week 8 then maybe let Danny go for a more couch lock. Danny: GRAPE SMELL. Holy, I don't know if it's more of a Grand Daddy Purp pheno or what but holy is the grape smell off of Danny insane. Almost like a different strain compared to the smells off Arnold. WEEK 6! HOME STRETCH OF GLAZED GROW #1! The smell is insane. What started as a premature musk has slowly evolved into sticky ass chocolate goodness, fresh mint/herb, and even some grape/fresh fruit smell on the fingers after defol and mold checks. Noticing a hint of that GASSS too as we start to enter the final ripen. This will also mark the final week of Nute feeding. Fed today and probably two more Weds/Sun. Then will switch to Molasses/Water for Week 7 and plain water for first half of Week 8 before the dry out. As you can see, Big Arnold is showing cal/mag and PH problems. Always bounces back after PH perfect feedings and I've been defoliating the faders as we go to save bud energy. It's been rootbound since mid-flower and I'm sure the whole root zone is a mess. The extra work I've had to put into a soilless peat-based medium like ProMix with a photoperiod plant has been great practice and experience but I'm looking forward to a few round of autoflowers and soil grows to dial back the difficulty settings through the winter months. Broke out the good camera for some shots since we're getting to the good stuff 😎 - Canon EOS 760d - 75-300mm - 50mm Have the twins hanging out with the SoundLink again for those good vibrations 👊 PLANT PLAYLIST: Kendrick Lamar - To Pimp A Butterfly Sublime - Sublime Shad - TSOL