Processing
Likes
Comments
Share
Likes
25
Share
The brightest green in the tent, she is looking happy and wished me a happy Father’s day for the wonderful job I’ve been doing over the past two weeks 🤣. Very simple up to now with simply PH’d water at 6.1. I had read some research in regards of levelS of preferred PH throughout cannabis life cycle and only thing I remember was cannabis prefer acidic soils that we all know but in early stage of life PH water on the lower guidance of 5.8 is preferred as the opposite in late flower 6.3. For my personal experience I’ve been trying this now for the last two grows. Today is premix/transplant day. 3 gallon will be its final pot and should time permit I will do a quick vid tutorial of my mix using Gaia Green. Stay safe n Happy c’est la vie!
Likes
10
Share
She is getting big and so far non-issue with the ladie. Looking forward to next week's
Likes
4
Share
Hola a todos!! Espero que anden bien 😃🤞🙏. Les cuento que esta semana han comenzado a crecer un poco más los cogollos. He ajustado el ph del riego a 5.8 para equilibrar el drenaje, pero me sigue dando alto. Igualmente regue con Top bloom 2ml x litro Y top candy 1ml x litro También añadi un riego solo con agua y luego el siguiente fue con trico mas de Namaste. El preparado de jabón neutro a calmado bastante los trips.
Likes
1
Share
Been a long time growing this one but soon ready to put it into bloom.
Likes
7
Share
Esta cosecha fue muy buena con excelentes resultados de flores muy compactas y demasiado resinosas , la genética en sí es muy resinosa con olor muy característico , con sabores terrosos muy marcados .
Likes
9
Share
@RadDad
Follow
It's Chop Day! I've taken her down and placed the flowers on a drying rack at the top of my grow space above the lights. Since I've got the RH around 55% anyways it should be a fine drying environment for now. The was a beautiful plant and super easy to grow. I recommend that anyone interested in a high CBD, super low THC strain give this one a try. I'll write a full review on my final harvest diary in about 3-4 weeks. Thanks for following along while I grew my first autoflower and my first CBD strain. Stay tuned.
Likes
6
Share
@starke
Follow
UPDATE - 24th of February 2020 - DRY WEIGHT & LOVE 56g total dry weight, after I gave them a very nice trim. They started curing in glass jars on 19/2/2020 and are currently between 63-68%RH inside. Burping every other hour for couple of minutes. While trimming some dried buds yesterday, I came across a seed, I couldn't believe it, between 😕and 😆, first time experiencing this, interesting, hopefully she didn't lose a lot of her potency and it only happened late. Learning from this: don't change light cycle. I changed from 18 to 21 hours, thought that was a good idea... All this aside, I am sooooooo in LOVE WITH HER 😍I have never grown such a beautiful plant, excuse the photo spam, she deserves a stage, at least for me 😉I can't wait to try her properly cured and get to learn her whole taste spectrum with the low and slow dried buds. Some of them will be processed to oil and edibles. If I find time, I might document some more. Until then, happy growing everyone, peace 🙏 Tried 2 different drying methods: 1. Regular hang dry: For 7 days in small grow tent, darkness at 50% humidity & 20°C/68F - she was almost too dry after 7 days. 2. Low & Slow dry: after washing & hang-drying for 4 hours, she went into the fridge for 7 days in a paper bag, followed by several jar tests until she was at a steady 68% outside; She dried like this in the fridge for 8 days. I didn't trim her too much, since I want to preserve everything for oils. More details: 16. Nov. 2019 - 13. Feb. 2020 - 88 Days - Grown from Seed Smell of Berries; Pink & Yellow tips; Lots of long curly brown hair; Pink tiny leaf tips on top of buds. I’m in love whooooooooooaaaaaaa. Chop on 13. Feb 2020 - 461g Put in vase with PH water for 2 days in Dry Tent darkness at 50% humidity & 20°C/68F 14. Feb. 2020 Darkness Day 1 - 469g 15. Feb. 2020 Darkness Day 2 - 452g Total wet - no trim - 452g Total wet - slight trim - 386g //Regular dry in tent - 50% humidity & 20°C/68F // 281g with trim went in Total dry - no trim - 43g Total dry - trim - 40g //Low and slow dry in fridge // 96g went in Total dry - trim - 16g Check 420magazine for “Low and Slow”-Dry. They are lovely. Happy day to you all
Processing
Likes
8
Share
Week 3 for the smaller plants, week 4 for the 2 larger plants...I noticed new growth fairly quick after transplanting, they seem to be liking their new home :) I increased nutrients and started tying/LST
Likes
8
Share
@Aldo90
Follow
I was going to upload the process, but the wiser side of me said no. So I've edited it out and some of the evaporation process can be seen. Bho/wax/honey whatever we care to call it
Likes
2
Share
@valiotoro
Follow
Hello everyone 😎 Week 2 for my girl it’s time for Topping & some LST She is doing very well,growing at fast pace and with a beautiful green colour on the leaves. Have a nice day 😎
Likes
25
Share
Jour42 defolliation and LST Jour45 defolliation Jour47 arrosage avec de l'eau ph6.3 à laquelle j'ajoute 1ml par litre d'eau de topmax biobizz La plante entre maintenant en floraison c'est donc le début du stretch Explication en anglais (Stretch explanations more) EXPOSURE TO LIGHT One of the main culprits in abnormal stretching of cannabis plants is the lack of light. Plants that are too far from an adequate light source will respond by accelerating stem growth in order to get closer to the lamp themselves. Especially when there are many other plants. A lack of lighting can easily cause overcrowding in a growing chamber, reducing the steady progression of your crop and the distance ratio between your bulbs and your plants. To address this problem, be sure to provide enough light to your plants to prevent stem growth. At the same time, you should not position your lights too close to your plants either since this would also result in an over-stretching of the stems and in some cases, the loss of your crop. In addition to the distance between the light source and the plant, the type of light you will use also affects the size of the stretching of your crop. The orange and red lights encourage stretching and result in thinner, larger stems. And conversely, blue light stimulates a growth of thicker stems and a smaller size. When a species is ready to enter the vegetative phase and undergo its most drastic stretching period, metal halide lamps can be used to deter far too long stems. THE HEAT Heat is another essential element that can determine the stretch size of your plants during vegetation. Temperatures above 27 degrees push the stems to lengthen more and more and will propel the potential of sativas to push as high as possible. Heat lamps that are positioned too close to plants create an intolerable environment that will grow large, soft plants that will potentially wobble until they fall and lose flowers in its fall. OTHER CAUSES OF STRETCHING There are multiple variables that can lead to the stretching of plants beyond what could normally be expected of the plant. Environmental stressors resulting from transplantation (when a plant passes from one pot to another) can cause the plant to return to shock. This will eventually trigger a reaction causing a stretch. Cannabis plants that are not grown in decent conditions or do not receive enough nutrients will respond in a variety of ways and this includes stretching. Crops that are not spaced far enough apart are likely to stretch to sting the light to other plants. Due to extreme proximity, the plants will fight among themselves to reach the light, forcing them to expand as much as possible throughout the crop. HOW TO CONTROL STRETCHING DURING FLOWERING Stretching during flowering, you guessed it, takes place when you move your plants from the vegetation stage to the flowering stage. This is a completely normal reaction, as your plants are preparing to bear the weight of their heads. Stretching of a plant at the beginning of flowering varies widely; some plants can double in height while others grow only a few centimetres. There are, however, two main variables that can give you at least an idea of how your plants are stretching during flowering, and how much. Here are these two variables: Variety: Genetics has the greatest impact on the size of your plant. In general, sativa varieties stretch more than indicas and tend to develop long, slender stems. Light: Some lights, such as HPS, are more likely to encourage stretching. In addition, great distances between your canopy and your lights will cause the plants to stretch as they try to get closer to the light source. Stretching during flowering usually lasts the first two weeks of the phase. To minimize stretching, keep your lights between 10 (for CFL) and 30 centimetres (for HID) of your canopy. Finally, choose indica varieties if you have a smaller growing space. HOW TO AVOID STRETCHING In many cases, you can expect your cannabis plants to stretch during the flowering phase. Keeping that in mind helps to make a plan in case your species ends up growing much more than you could have imagined. If the information is available, get information on the standard size of your species and compare it to the size of your growing space taking into account the necessary distances between the bulbs and the plants. TRAFFIC While outdoor crop operations benefit from natural air to naturally limit stretching, indoor crops must assume the maintenance of air circulation within a confined space. Basic ventilation is enough to help the cannabis stems strengthen and become thicker rather than too high. In this way, the plants continue to grow vigorously without reaching heights and at the same time, your tolerance ceiling. MANUAL INTERVENTION For growers who want to get their hands dirty, there are physical procedures that can be done to reduce stretching. Similar to the natural effect that the wind has on cannabis plants, manually bending the leaves and stems will cause tiny cracks in the plant's tissues that will cause the plant to focus on regenerating its wounds instead of its vertical growth. THE TOPPING Topping is a form of manual intervention on cannabis to influence its performance, shape or size. In essence, topping is a process in which a new node is cut, growing from the plant to reduce its size and create a "v"-shaped notch that will eventually form two heads. Topping may be an effective measure to combat stretching, but it is important not to do so when the flowering phase begins. In most cases, an abnormal stretch of cannabis plants will not completely destroy your crop. In fact, stretching can indeed help increase your performance. For growers with a growing operation large enough to contain tall plants, stretching can increase the total yield of a species with more vertical space for head formation. In both cases, stretching can easily be planned in advance and there are multiple solutions to help you with this problem which is all too common. May the force be with you 💪
Likes
10
Share
Harvest day 66 since time switch to 12 / 12 h Hey guys :-) Finally it's time 💚 The lady is done the large leaves have been removed and hung upside down to dry in the dark drying room. You can now stay there for 13-15 days at a temperature of 18-20 degrees and 55-62% humidity. After 13-15 days it is neatly trimmed by hand and placed in jars with boveda packs 62. After 4 weeks Boveda 58% come in and are ready for testing ;-). After everything has been cut cleanly, the last update comes with the smoke report and the finished pictures. Let's get to the plant 💚. Unfortunately, the rating system at Growdiaries is a bit strange because I have to give the stars before the Smoke Report and in the end it might have led to more stars in terms of taste. . The smell is great I'm curious about the taste 💚 Have fun and stay healthy 💚🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 ‘Powered by GreenHouse Feeding’ Copy the link for 10% off all Nutrients 👇🏼 http://shop.greenhousefeeding.com/ affiliate/madelngermany_passiongrower/ 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 Water 💧 💧💧 Osmosis water mixed with Cal/Mag (24 hours stale that the chlorine evaporates) to 290 ppm and Ph with Ph- to 5.8 - 6.4 MadeInGermany
Likes
22
Share
Des nuits plus fraîche ont fait sortir les teintes violettes et les fleurs son magnifique!
Likes
2
Share
Hey huerteros pues asi va esta sativa dream que hoy hace su dia 46... y nos veas como esta desarollando! Seguimos aplicando LST ... para ir abriendo la planta y haciendo una buena estructura para cuando llegue la fase de floración!! De momento solo regamos con agua y cada 10-15 dias añadimos microbes! El sustrato es All mix de biobizz y ya viene prefertilizado asi que por nutrientes no sera y la planta asi lo demuestro con ese verde tan vivo! Esperemos que todo siga igual... iremos subiendo contenido asiduamente todas las semanas! Saludos desde el sur 🇪🇸
Likes
44
Share
Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Harvest day 71 since the time change to 12/12 hrs. Hey guys :-) Finally the time has come . The lady was harvested. After the trichomes have been checked (70% milky 30% amber) as always, it was left in complete darkness for 48 hours before it was neatly trimmed by hand. After trimming, she was put back in the drying tent on nets. There they are allowed to dry for the next 8-12 days at 62% humidity before they are put into the jar to ferment with 62% boveda packs. After about 4-6 weeks in the jar I will swap the 62% boveda pack for a 58% boveda pack where it can be ready for another 4-6 weeks to enjoy :-). As always, the remains of the leaves are used to make Ice o Lator and oil. Of course, as always, there is a final update during the fermentation process. Until then, I wish you all a lot of fun with this update. Stay healthy 🙏🏻 and let it grow 👍. You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. You can buy this Strain at https://www.amsterdamgenetics.com/product/super-silver-haze/ Type: Super Silver Haze ☝️🏼 Genetics: Haze x Skunk #1 x Northern Lights Type: 70% Sativa – 30% Indica 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Nutrients : Green Buzz Liquids : Organic Grow Liquid Organic Bloom Liquid Organic more PK More Roots Fast Buds Humic Acid Plus Growzyme Big Fruits Clean Fruits Cal / Mag Organic Ph - Pulver ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4
Likes
54
Share
DAY 7 SINCE PLANTING: Everything is still going great I really like to baby these girls making sure they are always at the right temp and humidity and never dying for a drink .. you can definitely already tell a difference in how much water uptake each strain differs by... like the washing machine by ripper seeds was the first to take off and definitely sucking up water the fastest. Kosher Kush is super healthy as well along with the free BLUEBERRY seeds from “ Seedsman. I’m planning on moving them into my tent here in the next 10-14 days under my 1000 watt MH (dimmed to 600 watts) and 2 other mars hydro 150 watt leds(at half power) if you guys could help me out with your opinions ,thoughts, critiques Anything would be appreciated like how far away should I keep the lights after moving them into the 5x5?
Likes
20
Share
Que pasa familia, ya estamos de vuelta, y traemos la 3 semana de crecimiento, la verdad que pronto toca ya trasplantar, me sorprende los espacios entre nudos, el led no solo hace si función si no que mejora bastante el crecimiento de los ejemplares. Ph regulado, echamos poca cantidad de nutrientes pero en nada cuando trasplantemos cambiaremos la alimentación. Temperatura ideal, humedad algo baja pero sin problema alguno, ya va quedando menos para el cambio a floración también. Www.mars-hydro.com web: http://bit.ly/2uJAjgy ts600: http://bit.ly/3cnv0Ev code: an420 un saludo fumetillas y buenos humos.
Likes
140
Share
@MrJones
Follow
mrjones - Slurricane #7 S1 🌱Slurricane #7 S1 @inhousegenetics_official 👨‍🌾🏽GD Grower: MrJones 🔹🔹🔹🔹🔹🔹GOALS🔹🔹🔹🔹🔹🔹 🌞Environment - 75/80℉ and 55% Humidity 💧 Feeding - Advanced Nutrients Organic ⚗️Soil - 50% Ocean Forest / 20% Tupur Royal Gold / 10% Earth Worm castings / 10% lobster Compost / 10% Additional Perlite 🍃Training / HST, Will be topping, Cloning, and creating larger plants, and placing to flower under a trellis 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡Mars Hydro LED / Veg Geeklight Monster Board 480W V4 / Flower 480W FC 4800 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 📜 Rambling - With week 8 coming to an end, this week was spent with cloning, they are 1 week old as of today and so far they look great above the soil, started venting a little more, and over the next week will be hardening them and getting them ready to go into the veg tent. The nutrients have also been cut back to 50% with a PPM of 500. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️ Sunday - 03.28.21- These plants are recovering well from being cut back and cloned.- Fed girls with 30 ounces, they keep getting larger ▶️ Monday - 03.29.21- Fed with 40 ounces of nutrients at 50% strength. the plants are looking great. ▶️ Tuesday - 03.30.21- Fed with 40 ounces of nutrients at 50% strength. the plants are looking great. ▶️ Wednesday - 03.31.21- Fed with 40 ounces of nutrients at 50% strength. the plants are looking great. ▶️ Thursday - 04.01.21- Fed with 40 ounces of nutrients at 50% strength. the plants are looking great. ▶️ Friday - 04.02.21- Fed with 40 ounces of nutrients at 50% strength. the plants are looking great. ▶️ Saturday - 04.03.21-Feeding at 50% has allowed the plants to recover and are looking great. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 📜 Cultivar Information - In House Genetics - Slurricane #7 S1 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹