Sunday last day of week 11 expecting to cut it down fed banana, molasses, and honey for a final flush with ice, Friday final ice flush. In the dark for 12 hours then cut down for harvest

Harvest was done on a lovely summer day. Since summer was approaching, half of the harvest was hung upside down with the classic 60/60 and rest is stored in a wine cooler for drying. There’s also an oscillating fan below for airflow!

Alaskan Purple Auto is growing great under the Medic Grow Mini Sun-2. She has some big sativa colas going. She is just about done with bulking. She has a flowery earthy smell to her at the moment. I have had minor issues along the way, but overall she has been killing it. Thank you Seedsman, and Medic Grow. 🤜🏻🤛🏻💪🏻❄️🌱 https://www.seedsman.com/?a_aid=Mrsour420. This is my affiliate link to seedsman. Thank you Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g

The Ladies are going great so far this week the buds are comming in really nice. the smell is wonderfull Kind soil as a base media and roots organic on the top. only di water Its really nice not having to worry about the ppms and ph of water and this n that ... so far this grow is just want i need nite time temp dropped below 58 a clp times on me .. i hope it done hurt the outcome to much

Začínají nakvétat 😍🍊🍧

First major defoliation

The girls have performed very well this week! The LST began, and there was some great growth in side branching. I also started this week off with introducing them to some nutrients ❤️ Start of week 4, the girls had responded well to transplanting, so I decided to start with some LST. My main method is to use soft wire wraps (dollar store purchase!) I poke one hole in the side of the pot near the top, and then go directly opposite that hole and poke through to make another. The first hole is for a wire wrap to secure the base of the seedling from pulling right out or over too far. The other hole is for the direction you want to bend your plant to. I start by slowly working the stem between my fingers at the point where I want it to bend. Twisting and pinching slowly so not to snap. *wait a day or two after your last water, or it will be easier to snap* once it’s ready to flop, I use the wire tie to hold down the top of the plant as close as I can to the nearest shoots. I’ll usually leave the plant like this for a couple of days, adjusting the ties, and then take them off to let them recover . Watered with a small dose of the full line I will be using for this grow. The girls got about 500 ml at the beginning of the week, but 2 days in I could tell they wanted more. By the end of the week they are taking nearly 1/2 gallon (which will give me 10% runoff) At the end of the week I increased the intensity of the BP2500 to 190 watts at the wall and the girls did show a few wrinkles as they adjusted, but have quickly recovered. I haven’t topped these girls, and I’m not sure if I am going to… thoughts? Happy Gardening 🇨🇦❤️🌱😎💨

✌️🎃 Thank you for checking my cultivation. ✂️ Last defoliation and LST to receive more light on buds.

I broke the mainstem performing LST😬🙄😳...Idiot 🎭... Repaired her with some tape, Guess no more LST training for her hehehe.. Actually, she started performing better after the break 🤷‍♂️...So perhaps it was a blessing 🙌. No nutes,No problems

Week 9 for this absolute specimen of a female Shes still fattening up incredibly, normal colas are forearm sized, poly cola is getting on for leg sized proportions 😂😂😂 Still a bit to go on her too, awesomeness Smelling like proper amnesia now unmistakable 👌😎👍😁

Aktueller Zustand der Pflanze (siehe Bild): Die Pflanze präsentiert sich aktuell in einem hervorragenden Zustand und entwickelt sich prächtig. Trotz der Herausforderungen, die wir im Laufe dieses Grows hatten, sind die Ergebnisse mehr als ermutigend. * Wuchsform: Die Pflanze hat sich sehr buschig und kompakt entwickelt, mit einer Vielzahl von gut ausgebildeten Seitentrieben, die alle dicht mit Blüten besetzt sind. Dies deutet auf eine exzellente Lichtausnutzung und eine gelungene Verzweigung hin, wahrscheinlich durch gezieltes Training in der Vegetationsphase. * Blütenqualität: Die Buds sind auffallend dicht und zeigen eine beeindruckende Harzproduktion. Die Trichome sind bereits deutlich sichtbar und glänzen, was auf eine hohe Potenz und Aromaentwicklung hindeutet. Die Stigmen (Blütenhärchen) sind größtenteils bernsteinfarben verfärbt, was auf eine fortgeschrittene Reifephase hinweist und die bevorstehende Ernte ankündigt. * Blattgesundheit: Die Blätter sind weiterhin größtenteils grün und vital. Einige der größeren Fächerblätter im unteren Bereich zeigen die für die späte Blütephase typischen Vergilbungen, da die Pflanze ihre letzten Energiereserven in die Blütenbildung umlagert. Dies ist ein natürlicher Prozess und kein Anzeichen für akute Mängel in diesem Stadium. Herausforderungen und Erkenntnisse aus diesem Grow: Wir hatten im Laufe dieses Durchgangs mit einer Volatilität des pH-Wertes zu kämpfen, die zeitweise nur schwer zu stabilisieren war. Dies führte zu der Notwendigkeit, den pH-Wert der Nährlösung häufiger anzupassen. Nach genauerer Beobachtung wurde die Hauptursache für diese pH-Schwankungen identifiziert: Algenbildung auf der Oberfläche der Steinwolle. Diese Algen konkurrierten nicht nur um Nährstoffe, sondern trugen auch maßgeblich zu den instabilen pH-Werten bei. Learnings für den nächsten Grow: Um die Algenbildung und damit die pH-Problematik zukünftig zu vermeiden, sind folgende Maßnahmen geplant: * Reduzierung der Steinwollwürfel-Größe: Es werden kleinere Steinwollwürfel für die Keimung und Startphase verwendet. * Einsatz von mehr Tonkugeln (Leca): Die Steinwollwürfel werden im nächsten Grow deutlich besser mit Tonkugeln abgedeckt, um die Oberfläche vollständig vor Licht zu schützen. Dies wird die Algenbildung effektiv unterbinden und somit zu einem stabileren pH-Wert beitragen. Ausblick: Trotz der aufgetretenen Schwierigkeiten bin ich mit dem aktuellen Zustand der Pflanze äußerst zufrieden. Sie ist ein starkes Beispiel dafür, wie widerstandsfähig diese Pflanzen sein können, wenn die Grundversorgung stimmt und auf Probleme reagiert wird. Ich freue mich auf die bevorstehende Ernte und bin gespannt auf die Qualität des Endprodukts.

I made a concoction of living soil using ingredients I could find of subcools formula. Theoretically all i need to add is ph balanced water. And a tea once I decide to flower. I'm waiting for some gadgets[ph and moisture meters]to come in before doing any extensive watering.

🌱 Week 1: The Journey Begins! 🌟 Hey Grow Fam! 🙌 We’re off to an epic start with our TrolMaster adventure, and I’m already feeling the love for the setup, the seeds, and the growth happening in the room! So, let’s dive right in and get into the details of this exciting week! 🌿 Germination Update: Our first Gorilla Melon seed from Fast Buds didn’t sprout, but no worries—round two was a success! 🦍🍈 The second seed has germinated and is looking full of potential. I’m throwing in a Sweet Seeds Papaya Zoap into the germination station too, so we’re keeping this exciting lineup going strong! Germination is such a key part of the journey, and having a healthy start is what it’s all about. 🔧 Room Build & TrolMaster Setup: The build is coming along beautifully, and I gotta say, the TrolMaster system is blowing my mind! Everything’s under control like magic 🎩✨, and the TM+ app? Wow, just wow. I mean, I can literally be in the bathroom and still keep an eye on the plants—check all the metrics, adjust settings, and fine-tune what I need, all from my phone! 😂💧 This level of control is next level. I’m loving how smooth and seamless it makes managing the room. The gear is just unreal, and seeing it all come together is truly something special. 🌱 Nutrition Talk: As for feeding, we’re starting light but smart! I’ve begun with 0.15ml of Regulator and 0.25ml of Startbooster per liter for now. I always believe in starting easy and ramping up as the plants develop. These early stages are crucial—balance is everything. For the time being, I feel this is more than enough to keep the babies happy and healthy. 🌿💧 The Regulator is working wonders in maintaining plant structure and health, while the Startbooster is fueling the early root and vegetative growth, laying down a solid foundation for the weeks to come. It’s about getting it right from the start—too much too early can be a killer. Keeping it steady with precision, that’s the goal! Big Shout-Outs: To the amazing team at @TrolMaster, @Fast_Buds, @Sweet_Seeds, @AptusHolland, and all the incredible sponsors—I’m beyond grateful for the support! 💚 And to my GrowDiaries fam and followers, you guys make this journey what it is—thank you for the love, and I’m so honored to have you along for this ride. 🙏 We’re just getting started, and I can’t wait to show you what’s next. Stay tuned for more updates, epic builds, gear reviews, and plenty of insight. Don’t forget to follow me on GrowDiaries, YouTube, and IG for exclusive content, and let’s make this grow the best one yet! 🌿🔥 Growers Love to All 💚💚💚 P.S.- A deep dive into the Full Spectrum Quantum Sensor (MBS-PAR): The Full Spectrum Quantum Sensor (MBS-PAR) is an essential tool for any serious grower looking to optimize their light environment. This sensor measures photosynthetically active radiation (PAR), which refers to the spectrum of light that plants actually use for photosynthesis—typically between 400 and 700 nanometers and more depending . What makes the MBS-PAR sensor special is its full spectrum capability, meaning it accurately detects not just visible light but also far-red and UV light—which are crucial for maximizing plant growth, development, and flowering. With this tool, I can monitor the exact intensity of light my plants are receiving, making sure they’re getting the optimal levels for every stage of growth. By using this sensor in my grow room, I’ll be able to ensure that the light distribution is uniform across the canopy. Plus, it allows me to fine-tune the light output from my ThinkGrow LED setup, ensuring my plants are thriving under the best conditions. Whether it’s increasing light during the vegetative phase or fine-tuning it for flowering, the MBS-PAR sensor helps me keep everything on point. And the best part? I can monitor it all through the TrolMaster app, ensuring I can make adjustments whenever needed—even if I’m not in the grow room! This level of precision means healthier plants, better yields, and maximum efficiency. It’s a game-changer for taking the guesswork out of lighting and getting closer to growing perfection! 🌱💡 Growers Love to All 💚💚💚

🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 Welcome to week 11, dear friends!! 😘 Watering with each 5ml of Growzyme, Humic Acids + Bigfruits 💧 Thanks, everybody!! 💚 💚 💚 Grower love!!! 😘🙏 🌱 _________________________________________________________________________________ SETUP: 80x80x180 cm Zelsius 240W Full Spectrum LED IR UV dimmable DW240H-A6-HS Heatsink color red LED Chips: 512pcs SAMSUNG LM301H + 24pcs Osram 660nm + 8pcs Osram IR 730nm + 8pcs UV 385nm Color mix: 2700K + 4000K 2,8umol/J Driver HLG-240H-C2100B Coverage: veg 5x3ft / flower 4x2ft Product size: 628x205x68mm Green Buzz Nutrients Shouts go out to my sponsors @GreenBuzzNutrients, thanks so much for your support! ❤️ If anyone would like to try their amazing organic products, use code GD42025 for generous 25% discount (for orders of minimum 75€) ✨ https://greenbuzznutrients.com/ Mills Nutrients Biobizz Lightmix custom exhaust fan 320/270cm³/h Carbon Active Granulate 240cm³/h tab water pH 8 - EC 0,25 with Calmag to 0,5 Advanced Hydroponics pH minus Grow + Bloom to pH 6.2 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭 🍊 🍋 🍮 🍭

This grow had its up and downs but I must say I’m very happy with the out come with over 2 pounds. One of the plants gave me 7.5 ozs alone. Now I’m on to my next journey after my grow room reset. I will be running some fast buds white widow auto and jack herer auto in the grow ace air Cube be on the look out for that journal. Thanks for all who kept looking and liking the journal. Lots of more fun content coming soon.

I am very satisfied with the course and I hope it will continue to be successful!! :) Do you have any comments?

Week 8, and my custom fit SCROG has been installed! ❤️ At Day 50 I separated my 7 gallon girls and my 5 gallon girl. Once done, I began the very easy process of adding my “floating” SCROG. I use ratchet straps, just like the ones that come with lights to secure the four corners of the screen to the top of my tent. This allows me to adjust the screen height as necessary when 1) first installing and 2) once the full stretch of flower has occurred, I can tweak it a bit to balance the canopy as best as possible. It’s not 100%, I still get some over achievers, but I find it useful as another option. I like to do a major defoliation before I set the ladies in. Typically till this time, I have done almost no defoliation, just LST and some HST techniques. I adjusted the ladies placement to allow growth out all sides of the screen, set the screen height and began tucking and bending. The defoliation and bending allows light to penetrate all those side shoots that would have amounted to nothing, and they become top shoots as they grow up and form an even canopy. I don’t like to weave, it can damage the new shoots and cause growth problems, but the goal is to get as even a coverage as you can while allowing for plant growth in all directions. Once complete, I will give the girls about a week to recover and grow those new shoots. I like to have about 80% coverage of the screen, before I change my light cycles to flower 12/12… and if they are healthy and strong. I’ll decide this weekend if it is time ❤️👊🇨🇦😎 Happy Gardening!