The Grow Awards 2026 🏆
Processing
Likes
Comments
Share
week 9 was a good week I watch my pollen sacks grow into beautiful pods cant wait to use it plant doing pretty good health and strong
Likes
20
Share
@MrPott
Follow
She looks ready enough to be flushed for a week. I'll just be using dechlorinated tap water from now on. Can't wait to smoke her! I remember her flavour to be really fruity and soury.
Likes
4
Share
Week 4 Last week was good gave the last defoliation for day 21. Adding a higher feed for her. This one got crazy pistil produced & it’s going all the way down the plant it’s the shortest out of the 3 but has the 2nd most pistil producing on it Check out my IG for more content @therealterpio & check out my other dairies (jungle verde & Gelato Cake)
Likes
4
Share
@Hommero75
Follow
Week 5 for this beautiful plants. They just got fed with Goldleaf feterlizer and I added mycos chum and cal-mag to the mix. They are doing great so far with the feeding schedule and they are stretching really good. The pre-flower is going well they are starting to grow.
Likes
4
Share
This Week i let them just continue to grow out of the LST. Last Day of the Week i cut down all the lower branches and defuliated the leaves. First Week of Flower and the Plant shows some nice female Flower-pistols. This Week i started with the Flower Feeding, i gave her about 4 tsp Seabird Guano as Topdress Feeding, it got a NPK of 7-4-5 so not idial for Flower but i guess Perfect for Streching-phase. Please Let me Know if you do Lollipop your Autoflowers ?? i was pretty unsure if i should do it but i was afraid that if i didn't do it it would cause problems cause of the ventilation. Hope you like the Grow so far !
Likes
43
Share
Hi everyone 🤗. On 07/23/20 the time intervals of the lights were changed to 12/12 h :-). Now you have some time left to grow in the network that has been installed. This time I deliberately gave less vegi phase because they grew a lot after the time change in the last run 😅. You will still get Canna Aqua Vega A + B until the correct flower production begins, after which a complete water change will be made (as every 14-18 days). From then on she gets Canna Aqua Flores A + B and Canna Boost 😃. I am very excited to see how the gelato from Zamnesia to Aero develops, because I have always grown this genetic on Soil :-). Otherwise, they look beautiful, and all parameters except the water temperature are in the optimal range. Since the grow cooler for the 0.8 system is unfortunately too big and I don't see any problems with the 23-24 degrees water temperatures, I won't need a water cooler for the time being. I hope you enjoy the new update, stay healthy alle and let it grow 🌱 You can buy This Strain at : www.Zamnesia.com ☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼☝️🏼 Strain Gelato clone from mother (Zamnesia ) ☝️ Genetics: Wedding Cake x Gelato x Gelato 33 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.5 - 5.8 💦 💧
Likes
9
Share
Continued vegetative growth, preparing for topping, increased watering a bit more frequently to almost daily (just as needed.) Nothing crazy just maintaining conditions.
Likes
17
Share
@Dunk_Junk
Follow
Apologies for lack of photos. But here is a close up timelapse bud shot for half a week...
Processing
Likes
22
Share
@B4niTa
Follow
Day8 im give for girls 1ml/l voodoo juice m, never before im don’t used this brand :d Day10 girls growing well i think i stard feeding for them Day14 i was have a small problem with ph bit im allredy buy new ph meter... wtf old one show 6.5 but real ph was 5,4 :( but this problem is eliminated! See you guys at week3!!
Likes
21
Share
@PPFDaddy
Follow
Another week gone! The first girl on the left finished early, with around 10-20% amber trichomes, so I happily chopped her. The others are close behind and probably entering their final week before harvest. I lowered the RH to 50%, and wow, the aromas really exploded-sweet and intense! One showed her Granddaddy Purple side with beautiful violet hues, while the others stayed true to their Orange Punch phenotype. It's been an awesome run, and next step is flushing the substrate with pure water, CalMag, and Cannazym (pH 6.5). Good luck everyone, and happy growing!
Likes
16
Share
Hi to all friends of the green leaf, So, the move to the big tent went well, you can see the strawberries like the space, they started to expand immediately. Today I gave them one last "big" training, they are all starting to bloom nicely. Oh, and lest I forget, for the first time I'm experimenting with adding CO2, I used the normal fermentation process, using yeast, sugar and water. I mixed it all up in a bottle, made a hole in the cap for the tubing, and placed the end of the tubing in a circulation fan. So, have a nice time and keep it growing ! Peace✌️
Processing
Likes
31
Share
Hello my fellow Growers👊 It was another Great week for the Kush Fromage 🙌 All the pictures were taken on Sunday, which was Day 42 of Flower. She is really starting to reek the whole area up. It is a very earthy kush like smell with fresh grapes on a grapevine mixed in, it's a very unique smell😊 She is supposed to be a very heavy resin producer and have a high THC and CBD content. Anywhere from 18-26% THC and ~3% CBD according to the breeder. I can tell you this it is one very very resinous plant😵 even the fan leaves and smaller leaves that have no trichomes on them have developed an oily resin on them. It's awesome so I can definitely say it is a heavy resin producer. If a sugar leaf touches another leaf you can see an oily resin where it touched it, my fingers get sticky just from the fan leaves👍The breeders estimated time of Flower is around 63 Days. So we got a few more weeks to go!! I hope the buds will fill in a good bit more but I am not counting on them getting huge due to this strain being more on the quality over quantity side of things. It's not a bad producer and I'm sure they can get some pretty huge flowers on em, but I have seen plants that can produce way more, but this strain makes up for it in its potency and resin production. Plus I personally like the Quality over quantity strains. Though at least nowadays its nice that we have a lot of strains that are a nice compromise and have great yield while also having great quality😎 Thank for stopping by and checking out the Grow👊👍 Happy Growing an plentiful Harvests to you all!!🙏
Likes
12
Share
@GrowGuy97
Follow
Will post dry weights & more comments soon! Sorry for the lack of updates but Thanks for following & happy growing friends!✌️🏼🙏🏼🌱
Likes
5
Share
The plant looks super beautiful, typical OG kush fat indica leaves, excellent growth pace, obviously short height, I love OG kush, last time I grew this strain it was 4 years ago, it's gonna be a beautiful plant for this 2021, she loves the spanish sun! Stay tuned everybody
Likes
41
Share
@Reyden
Follow
Purtroppo per montare il filtro a Carboni mi è caduta una fascetta sulla Limonata Viola e ha tagliato una foglia a ventaglio del nodo più grande facendo un piccolo danno, ora dopo 5 giorni sembra essersi comunque ripresa, metterò altre foto appena torno a casa, queste sono di 4 giorni fa…comunque sono veramente super vigorose queste FF di Fast Buds!!!
Likes
4
Share
@Zywap
Follow
Brewed a Tea for the ladies and there loving it, just transplanted the rest that weren’t into 3gal pots. they’ve all bounced back. Deciding on not using any synthetic nutes an just keep using the tea an maybe some other organic things. But the rest are bag seeds reason i’m not posting them lol but a little bigger then the crown royals tho i did start those about a day or two after
Likes
11
Share
@CalGonJim
Follow
12/5 did some LST yesterday the first time I tried it she’s responding well I’m going to continue nutrients at half strength and that’s all for now 12/6 there are more bud sights on this than I’ve ever seen on any auto flower. I’m already seeing a lot of crystals in the leaves she’s responding well to the LST and I gave her a 1 mL per liter feeding of nutrients with 2 L of water I’m trying to be very careful. I have been using SF1000D lights I bought them a few years ago,they’re not bad they do get hot, especially when I’ve tried to put two of them in one tent it is very difficult to keep cool. Viparspectra I’ll keep it running at 80% and that should be good enough for one autoflower, I got the XS1500. I want to see if there’s any difference in the newer LEDs compared to my older Spider Farmer lights . I found a discount code in one of the discussions here in the site somewhere, and it actually worked it came to about 145 total. It’ll be here tomorrow. 12/7 💎💎💎 I love this seed company. This plant that I topped between three and four and did LST two days ago on is showing me bud sites that are fuller and more full of crystals that I’ve ever seen. this is my 10th Autoflower, my first one from this company and it’s completely different, way better, it’s just phenomenal. I like a clean and symmetrical and even grow. Doing this will make it much easier to process. I’ve never seen a plant grow like this. This is my first time trying LST and I’m glad I did it. It completely changes the plants you can definitely see there will be much more. 12/7 she looks great. because I spread the branches out the way I did, and only have one light on the leaf surface temperatures and the bud surface temperatures are all between 72 and 74° which is perfect. 12/8 Resin production is incredible. it looks like millions of tiny angels jizzed all over my plant it’s the most beautiful thing I’ve ever seen 12/8 I got the new Viparspectra light today. It has about 100 more LEDs in the SF 1000 D I’ll take some magnified pictures of the LEDs. The new one is much heavier I like the dimmer that way I don’t have to put in secondary lights for seedlings. It’s not a bad light I like being able to dim the light I ran it at 100% and the temperature was a little hot for me and I’m keeping it kind of close to the plant so I’ll probably lower it down to 75% and that should be good I think. Also I noticed that this one Viparspectra light looks to me brighter than 2 sf100d lights. 12/9 I turned the Viper spectra light down to a little bit less than 75% to bring it down to 100 W. When I did that the temperature stays around 95° on the board and about 98° on the driver, so it is far cooler and more efficient at the same wattage than the older spider farmer lights which were at 110 to 118°( about the same as the XS1500 at full power). So a single 150w xs1500 is about the same as 2 SF1000D lights as far as heat I'm sure the PPF or whatthehelleverthatis is higher ,very nice, If the SF1000D's would have had dimmers they would have been perfect. 12/10 awesome 🤩 12/11 I am seeing lots of resin production more than I’ve ever seen. I think this is so far been my best most successful grow this plant is great. I’m glad I found the seed company. The other ones I used before were pretty bad, I don't LOVE them at all. Also my Yamaha A4A 1600 receiver is total junk, I mean total... I'll never have the money to spend on something like that again, I was totally ripped off. Unrelated but so many formerly trustworthy companies are just TOTAL garbage
Likes
38
Share
@kijani
Follow
small things put big things into perspective this week ... it sure feels longer than 7 days this baby plant week ... the new seedling is doing great, and with the new home I don't have to mess with it as much. i have to bring the light very close to the seedling to prevent stretching. unfortunately, the light directly above the seedling prevents me from really enjoying the growth visually and taking lots of pictures, still, the camera and timelapse helps. i think i should have started the seedling elsewhere then brought it to the pot when the roots were developed more, but it is safer here - even if it seems a little slow growing. i think the growth will sprout once the roots are directly exposed to the pressurized nutrients. it was fun dosing and using the diy doser, even though I had to prepare and dispose of a 50-gallon nutrient batch when I only really needed 2 gallons for the hpa garden. still, I can't measure things accurately manually so the plant(s) has a better chance this way. also, i get to run the doser commands manually, which is making me learn and understand better the challenges it will take to make multi-zone dosing reliably autonomous girlfriend and i are looking forward to a second week of grow
Likes
8
Share
Green papaya from super sativa seeds club looking good at week 6, we will continue with some more nutrients from xpert nutrients this week and after that only water. The buds are showing quite some thc levels and have an amazing sweet smell. Very happy with this tester for sure!
Likes
1
Share
May 20th and the biggest plant is making a comeback and is looking much better