Likes
Comments
Share
@Killabeez
Follow
This one come in on top of my list, buds are fat and covered in tricomes also it has a lovely stench! Great autoflower genetics! Harvest 9weeks from seed
Likes
226
Share
@HighTV
Follow
| 📅 Week 6 | Days 36 - 42 | 💡 562w 📏36' | | ☔ 37%-61% | | 🌡️️🌞 74 - 79 | | 🌡️️🌑 68 - 74 | 12/14 All PH's adjusted to 5.6 and LST updated to give better light penetration. Bud development has begun to form on all plants now including the focus plant so I did some medium defoliation to start out the week. (Despite my attempts to slow the focus plant down with the she stretched through it anyway!) 12/15 Reservoir Swap on the 2 non-focus plants. They received only Bloom+Calmag+hydroguard for week 6, because they hate nitrogen and get nutrient burn easily. Of course all of the PHs have been adjusted to 5.8 like done daily. 12/16 Reservoir Swap on the Focus plant. Shes received only Bloom+Calmag+hydroguard for week 6, again because they hate nitrogen. All plants received an updated LST and a PH adjustment to 5.6, because its been climbing day to day. 12/17 I rotated the plants some to give a better stretch then adjusted the PH of all the reservoirs between 5.8 and 6. A small update to the LST and I maximized the height of the light so its not going up anymore. Topped off the reservoirs. 12/18 All reservoirs had their PH adjusted to 5.8 and I did an LST update like everyday. I am getting close to running out of PH test drops so I ordered more yesterday I might have to reservoir swap daily to maintain PH without being able to test it. yikes 12/19 The plants are looking healthy and the smallest plant has decided to start stretching more so that's good. The non-focus plants are clearly showing their purple phenotypes, but the focus plant is being stubborn.. or not purple. 12/20 Topped off and PHed Reservoirs to 5.8. I used my last drops of the PH testing fluid so I will be doing a reservoir swap tomorrow, really earlier, because I know the PH of my tap+nutrients. Then the PH testing fluid arrives the following day so we will be fine. Don't forget to reup your essentials! Week 6 was a fantastic week of growth for the Focus plant especially. The other plants have really began to show their purple while our timelapse buddy is just a happy ol'e green plant. Perhaps this will change later in the flowering cycle. WE GOT A POLARIZED LENS just in time for us to increase the light to 750w, So now we can do the timelapse with a higher wattage of light and not get weird lines in the video! Overall this week was an 8/10 in terms of growth.😎
Likes
8
Share
We are starting the third week. We are fighting pH, but hopefully we will win the war. We are slowly starting LST. We believe in further growth before switching to flowers.
Likes
33
Share
@Eyeduno
Follow
This grow has been on of them grows when everythings going against you and what you want it to do
Likes
16
Share
A cutting requires roots to uptake water, we must create an environment so humid the plant can absorb moisture through its one set of leaves, 70+RH% but also a good supply of fresh air and full temperature control. Once I see light lime green it will signify new growth of the plant, I will know it has started to re-root.
Likes
2
Share
Plants are blowing up should begin flowering soon.
Likes
161
Share
FLOWER WEEK 1 ⭐️Nutrients Used⭐️ Front Row AG Si .5g per gallon Front Row AG Part A 3.3g per gallon Front Row AG Part B 2.2g per gallon Front Row AG Phoszyme .4g per gallon Front Row AG Bloom 2.6g per gallon Front Row AG CleanUp .3g per gallon This has been a great week. Some of the basics are coming together. Lights have been gradually raised by 5-10% every day except the last 2 days. By the end of week 2 flower they will be 100% and will stay there until last week of flower. Temp is 80 degrees, humidity is 60% and will also stay that way until the last 10 days of flower. I will go another week of tucking branches under the net to try and let the last plant reach the net. It’s just not stretching like the others. I need at least a week of stretch with vertical growth, so my smallest plant needs to catch up. There has to be 300+ tops in this 4x12 area. Every single node was topped 7-10 days before flower. Each branch has multiple nodes now. Between day 14-25 everything under the net will be removed. Clones were taken of every plant for a hopeful keeper pheno. Gonna try the whole “mother plant full clone run” for the next grow. By the end of week 2 parameters will be 1500ppm co2 1200-1500 ppfd 80 degrees 60% humidity Thanks for all the support and see you next week.
Likes
2
Share
Very excited for my first grow ever. My soil is the Biobizz-Light Mix in a 11L pot .I got so impatient that i even dug it out at some point to see the progress...i hope it won't have any consequences. The first days, i only sprayed the soil with some water to keep the soil moist. At Day 4 of germination i watered it for the first time with 250ml tap water at 6,5ph. I will run my light for 18 hours now at a distance of 60cm with full power. That will lead to round abot 215 ppfd and 12k lux for the final days of germination. At day 6 after germination two darker spots appeared on the first 2 leafs. I hope it’s just because of some water drops on the leafs. Watered every 3 days with 350-500ml of 6,5ph tap water. 23.05.24: For my definition the vegetative stage starts today. I will turn the light up to 500 pphd Very excited what will happen next!
Likes
3
Share
Moved dem girls into direct sunlight so they are getting more light coverage now....jus leave dem to do their
Likes
2
Share
Likes
6
Share
Legend Timestamp: 📅 EC - pH: ⚗️ Temp - Hum: 🌡️ Water: 🌊 Food: 🍗 pH Correction: 💧 Actions: 💼 Thoughts: 🧠 Events: 🚀 Media: 🎬 D: DAY, G: GERMINATION, V: VEGETATIVE, B: BLOOMING, R: RIPENING, D: DRYING, C: CURING ______________ 📅 D64/B27 - 18/06/24 ⚗️ EC: 1.0 pH: 5.2 🌡️ T: 26°C H: 80% 🌊 FLUSH 🍗 💧 💼 FLUSH first day 🧠 🚀 🎬 1 TL video ______________ 📅 D65/B28 - 19/06/24 ⚗️ EC: 0.2 pH: 7 🌡️ T: 26°C H: 80% 🌊 FLUSH 🍗 💧 💼 FLUSH second day 🧠 🚀 🎬 1 TL video ______________ 📅 D66/B29 - 20/06/24 ⚗️ EC: 1 pH: 6.2 🌡️ T: 26°C H: 80% 🌊 15 L 🍗 CalMag - Bloom A-B - Bud Candy - B52 - Overdrive 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D67/B30 - 21/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D68/B31 - 22/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 15 L 🍗 CalMag - Bloom A-B - Bud Candy - B52 - Overdrive 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D69/B32 - 23/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video ______________ 📅 D70/B33 - 24/06/24 ⚗️ EC: 1 pH: 6 🌡️ T: 26°C H: 70% 🌊 🍗 💧 💼 🧠 🚀 🎬 1 TL video
Likes
2
Share
@CheeRz
Follow
This week we only had bad weather and a lot of rain. But according to the weather forecast, it should get better again in the next few days. ☀️☀️☀️
Likes
6
Share
Likes
9
Share
Grow Sponsored by MARSHYDRO HIGH EFFICIENCY WHITE LED LIGHT: Newest SMD LED technology provide highest PAR/LUMEN output(743umol@18"), designed to replace a single-ended 250watt HPS; MARS HYDRO TS 1000W Plants Growing lamp makes you get 30% higher yield compare OLD blurple led lights, Max 2.0g yield per wattage (power draw) LOW ENERGY CONSUMPTION GROW LIGHTING : Consuming only 150W with 342 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 2.5x2.5ft,Max coverage 3x3ft. Over 90% light energy can be absorbed by plants; higher intensity and more even coverage in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS1000 SUNLIKE FULL SPECTRUM LED INDOOR GROWING: 660-665nm Red IR/3200-4200Knm/5200-6800Knm, infinite close to natural light, best for all plants all stages growing, rapid plant response from seed to flower and increase yield & crop quality‎ HIGH REFLECTIVE & NOISE FREE-Fanless LED GROW SYSTEM design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom Get your own at https://www.amazon.de/dp/B07ZVFBR34
Likes
13
Share
Processing
Likes
4
Share
Day 49! Starting to give her just plain water for 2 weeks of flushing. Getting really excited to harvest and then get going on another grow. See you next week.
Likes
3
Share
My 3 week estimate last week might be a little long. Thinking 1 more week maybe. It's going cloudy pretty quick. We'll see how the week goes. Tried to clean up a little more between branches today but the canopy is pretty ridiculous for only 3 plants(really two and a half since #2 got a little stunted from the early root rot). I really should have been more aggressive skirting out the lesser undergrowth. I left it because it managed to stretch to canopy level but it's really choked up some areas. Buds are basically laying on one another when you get deeper in. Gonna be plenty of fluff for extracts.
Likes
21
Share
Start of week 3, the three survivors are doing great! I did happen to find some algae growing on top of one of the rockwool cubes. (This was my fault for not fully covering the tops of them with hydroton to block out light.) As an attempted fix, I cut some square pieces of black cloth that I laid of the top of the cubes to block out the light completely. Hoping removing their light source, the algae will die off and discourage any further growth. If it gets any worse I’ll try using a hydrogen peroxide solution. Day 17, the three ladies are looking nice. Starting to see some nice healthy roots populate inside the buckets. I went ahead and upped their nutrients today. We will see how they are doing in the morning. -FloraFlex - 1.5g/gal of each V1 and V2. -Advanced Nutrients - 1/2 strength MGB and hobbyist additives. **Algae update: seems like using the black cloth to block out all the light has killed off that algae growth and I don’t see anymore so it’s working!** Day 18, I thought one of my plants had root rot. Which was weird for it to happen that fast in less than 24 hours since changing the res. Come to find out it’s just nutrient stain from the Advanced Nutrients, so thank god. #1 and #2 which are growing with FloraFlex got FIMmed today. I’ve topped plants before but never FIM. Not sure if I did it right, but that’s the fun in all this, is experimenting to see what works. Day 20, #1 and #2 are responding well after being FIMmed couple days ago. I decided to FIM #3 as well. I also decided to leave the 4th one out of this diary from here on out since she’s behind. We will stick with the original three that survived from the start. So far I’m really loving their bushy appearance and thick leaves. Their roots are coming out super nice as well! Pretty soon these babies are going to just take off!