☀️ // Day 28 🌱 Damn, this plant made unreal progress in the last week. Kinda ridiculous, considering her rough start. I topped her last thursday, on day 24 of veg. She responded very, very well with an instant boost of the side branches. Her illness is also gone, all leafs are looking more healthy than I have ever seen in person. Now the soil seems to have stabilized itself and the BioTabs nutrients are kicking in. Beautiful to look at. Her fan leafs are also the biggest ones ever for me and with no signs of any nutrient related stress. I still removed them to boost light penetration to the side branches. This time it really broke my heart tho, because they were just the most beautiful leafs ever. Really loved the last week and I am excited again for the future of this beautiful plant. This time, I gave her 2 more branches. So I topped one node higher and try to lollipop pretty nicely to just have 8 main branches with no more sides what so ever. Just 8 branches of big buds, that's the goal. I watered her with another 2L on day 24, too. But she hasn't gotten anything since then because I pre-watered her on that day. The soil was not dry from the watering on day 22 but I was on vacation for 2 days. I wanted to make sure that she does not dry out. I will wait now one more day and feed her tomorrow, on day 29 with 3L. That makes a total of 5L since last weekly update. 💦 Watering: 5 L with pH = 6.5 💊 Fertilizer: Just water with epsom salt 💡 Light: 450 PPFD at 70%

Defoliation done and the girls are with great look Royal queen seeds genetics Emerald harvest and advanced nutrients used Perfect size and branches

Hello everyone, Another week has passed and i finally see some growth but it's still not what i was hoping for. On coco soil this plant would have been twice the size it is now, I learned alot of my mistakes and next dwc grow will be way better. My water chiller is still not arrived so i keep the temperature in the tent at 19/20 degrees celsius until the chiller arrives. I gave her a good defoliation and will wait a week before topping her again. Thanks for stopping by and have a nice day.

The temps are higher now because of the house being around 77 degrees. The humidity is staying low. Wondering if I should start flushing to start getting ready for harvest.

Week 2 Veg Update on Epic Buzz by Anesia Seeds As we enter the second week of vegetation, our Epic Buzz seedlings are embracing their new home with vigor.: One of the seedlings has been carefully moved to the 20-liter reservoir. It has adapted well to its new environment, showcasing an impressive array of roots throughout the net pot, indicating healthy and robust development. Both plants are progressing as expected, with no significant issues to report. The steady growth and absence of complications suggest that the conditions in my indoor setup are well-tuned to the needs of Epic Buzz. The images captured this week show that the roots are not only healthy but thriving. They have begun to colonize the net pot, which is a strong indicator of the plant's potential for nutrient uptake and overall growth. With the transplant successful and the roots establishing themselves, I'm keen to see how the increased space and resources will accelerate growth. I expect that the coming week will bring even more visible progress as the plants continue to mature. Watching the Epic Buzz seedlings transition smoothly into the vegetative phase is both rewarding and exhilarating. The absence of any noteworthy problems speaks volumes. I'm looking forward to observing their journey and sharing their growth milestones with the community. Stay tuned for next week's entry, where I hope to report on the continued prosperity and vigor of Epic Buzz in its critical vegetative stage.

Es ging stetig bergauf in Woche 2. Geplant ist toppen und später ein scrog zum stützen und zum Angleichen der Höhe. Der Wurzelstimulator von House & Garden performed mMn sehr gut, keinerlei negative Reaktion der Pflanze. An Tag 15 wird getoppt und dann bin ich gespannt auf die Blüte.

at last we are in harvest week. im happy at all it was a good experience. my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are dense and frosty but very little in size! i had some mistakes and problems with this grow so i admit i wasted them . lesson from this grow : grow autos far from fems and always give them 20 hours or more light per day to get good weight in little time.

Did not get up to see the plants this week, been watching the weather though. The weather was fine, next week looks a bit cooler and three day of rain, not great. First plant was hung a week and trimmed the first oz and a half. Looks like I may get five or six off this plant. The trimmed buds look fine. They were squished bringing them back. In my wisdom I bagged it inside five bags to avoid the smell and complaints driving back and that happened. Well I did not get any complaints though. Trimming is a bit of a chore now, oh well. Won't do that again. Buds look good and all is well. I may try to get up next week to see them. Cheers.

Watered 50 Gal fresh plain PHed water, ppm was around 2100 so if the 50 gal doesn’t dilute it enough then I will vac out the remaining water and rinse out the totes to get the salt/sandy particles off the bottom. I noticed the 2 mars 1600 leds are not getting light evenly to all the canopy so for my next crop I will be getting 2-6’ light rails and stagger the lights as they move, at 5-15 watts each they should be more efficient than getting 2 more 630watt leds. Also next crop I will be downsizing my scrog to a 7’ x 7’ giving me a 1’ perimeter for working & admiring 🙏🤤

Super busy with a move and a big garden reno. Sorry, this is the only update for this week

Through week 5 of flower and all is generally good. The whole tent stinks like hell of berries, pine and earthy Kush. They’re all presenting something a little different in terms of growth but still very similar terp profiles and bud structure. Seed maturation is showing on some of the lower nodes as well. We’re getting much closer here. Hopefully not more than a couple weeks but we’ll see. #1 will go off first for sure. She’s showing a progressing N deficiency that likely isn’t fixable but it does remain possible she’s simply ending her cycle. If so, it’ll be a trait worth noting on the F2 run. Until next week, ✌️! Background This project has been a year in strain selection (and another year in the actual making) to get to this point with a viable potential cross. It’ll be a true polyhybrid with a mix of sativa and indica leaning properties for each. We’ve combined an especially powerful hybrid sativa strain of Strawberry with an equally manageable and hard hitting strain of indica dominant Skywalker OG. The hope has always been to combine them and boil out the best characteristics of each. The strawberry is phenomenal in terms of terp profile and a mix of strong head and body effects while the Skywalker is a mind bending, body butter kind of indica with that earthy Kush profile and flowery undertones. The strawberry is prone to botrytis and fasciation but features excellent terps and yields if grown correctly. She’s Also stretchy and somewhat unruly when she gets going. The Skywalker is a contrast in growth characteristics with a squat structure, medium sized buds and excellent resilience and resistance. The plan is to seed out the available females and take cuts of what we can post-stretch to get a closer look at any differing phenos. Still very much early stages for a stabilized new strain but we’ve got the right foundation of solid genetics. Now we just gotta get it off the ground to the next generation👍. We’re predominantly focused on the plants that demonstrate that hybrid vigour and wasting no time with any problem plants or runts. Stay tuned - with a little luck, this cross is gonna be straight 🔥😎👌.

Cut on 5/5/26 drying. She has an initial sweet smell that turns pine and lemon kind of

======NOV 4 | DAY 22====== She is a bit different of predominat sativas, leaves are bigger. Today I increase some humus and some peat. ======NOV 5 | DAY 23====== LST her today ======NOV 8 | DAY 26====== 2 more LST HOOKS ======NOV 10 | DAY 28====== I hid some leaves below the main branches

I'm sorry I picked up too early but the botritis was taking over, I preferred an unfinished product than losing everything

Some bad news... Had pollen sac explode in the tent (two actually). I'm going to finish the grow, might lose some yield and have some seeds but better then nothing. I new this might happen from the sacs I found earlier in the grow. I did mist the tent down to minimize the pollen spread hopefully not to many flowers compromised.

The cannabis strain Grape Guava can be a purple strain, depending on its specific phenotype and genetic makeup. While not all phenotypes of Grape Guava are purple, some variations, such as the Zatix Grape Guava, are noted for their striking purple appearance due to the genetic expression of anthocyanin pigments. https://www.youtube.com/watch?v=cKdVmdoKJ5k In a garden of green, Grape Guava gleams, With its fruity aroma, enchanting dreams. Clusters of grapes, guava's sweetness ignite, A strain so divine, in purple and white. Euphoria whispers, a lush fruity haze, Grape Guava's embrace, a tranquil daze. Off and away.@1400ppm. The increased CO2 allows plants to thrive at higher temperatures, which in turn necessitates higher humidity to maintain the ideal VPD for healthy growth and transpiration. 80F -5F = 75F LST with 70% RH = 0.72 kPa. Higher temperatures and humidity promote rapid growth, nutrient uptake, and photosynthesis while maintaining a lower stress level. Temperature influences the rate of enzymatic reactions involved in aerobic respiration. Enzymes, such as those involved in glycolysis, the Krebs cycle, and the electron transport chain, work most efficiently at an optimal temperature range. In low temperatures, enzymatic activity will slow down, thus reducing the rate of aerobic respiration. In high temperatures, enzymes can become denatured, thus impairing their function and stopping the process of aerobic respiration. Glucose is the primary fuel for aerobic respiration. The rate of aerobic respiration increases with the availability of glucose, as it is the starting point for glycolysis. If glucose levels are low, cells may rely on alternative energy sources such as fatty acids or amino acids , but these processes may yield less ATP or be less efficient. To determine this effect, carbon dioxide volume was measured (as carbon dioxide is an output of aerobic respiration) 18/6 with the 6 being IR. The near infrared (IR-a) borders around 700nm up to 1400nm @ photon par flux density of 1.8 instead of darkness, keeping temps overnight a neat 77F-80F. Think of my tent as a lung. What goes in must come out. When the rate of air going out exceeds the amount of air coming in, it creates a negative pressure. Tent concaves (bends in). If set up correctly, your RH will begin to drop slowly to the desired level you set, and the extraction turns off when it reaches desired% RH. The plant, as it performs cellular respiration, will always be releasing more water into the air, so the RH% of the tent overnight will always increase, so long as oxidative phosphorylation is occurring. As soon as the RH% creeps back up to 55%, the extraction turns back on, over and over. This creates a strong pressure differential which will work wonders on your grow. Replicating high and low-pressure fronts in nature. Critical for oxygen diffusion at the critical time of peak cellular respiratory function.. Moisture will not transfer from a saturated atmosphere to another if that air is already at or above its saturation point, meaning the air can't hold any more water vapor. Once I understood that water is produced as a by product during cellular respiration, specifically at the very end of the electron transport chain (ETC) where electrons are finally transferred to molecular oxygen, the higher the RH of the air, the more resistance there is for more moisture to be added to that environment, and effects the ease with which it does so. But none of that water comes from the pot; it's pulled from the air. If you run high daytime RH, your medium/pot is 100% reliant on transpirational root pull to move water. ZERO evaporation happens across the atmosphere if the tent air has high RH%, the medium cannot release its water through evaporation. Once a canopy develops, light no longer slowly wicks and evaporates from the topsoil. The Soil-Plant-Atmosphere Continuum (SPAC) describes the continuous pathway and process of water movement, driven by a gradient in water potential, from the soil, through the plant's roots, stem, and leaves, and finally evaporating into the atmosphere through transpiration. There is evaporation, there is transpiration, and then there is evapotranspiration; Evapotranspiration (ET) is the combined total of two processes: evaporation (water lost directly from soil and surface water into the atmosphere) and transpiration (water released from plants to the atmosphere through their leaves). Evapotranspiration represents the total amount of water that moves from the medium into the air. There is no such thing as a medium with too much water, only a medium that retains too much for too long. The water must always flow efficiently from one atmosphere(Medium) to another(Air) in a timely manner. Moisture is a critical factor for bacterial growth and decay. Dictating how long it's allowed to sit in any one location for any given period is a key preferred control. To ensure a net reduction in a bacterial population, the rate of removal (ET) must exceed the rate of bacterial growth (decay rate), which is often modeled as a growth rate for the specific bacterium under the given conditions. By optimizing daytime VPD, we also optimize conditions for bacterial growth to explode exponentially above 77°F.. If water is allowed to sit in a medium without an escape within a timeframe, nothing good will happen. IF High RH is maintained overnight as well as during the day, placing 100% of water movement at the behest of daytime transpiration, roots can only pull where they can reach, and if soil is compressed above a certain point, moisture will become trapped in a medium with no way of moving day or night. This will begin the countdown for decay to take hold. When water stagnates in a medium, it loses oxygen, creating anaerobic conditions that foster the growth of harmful microorganisms like bacteria and fungi, which can produce toxins and disease vectors. Thigmomorphogenesis, the process by which plants respond to mechanical stimuli like touch by altering their growth and development, results in significant morphological changes to improve survival against mechanical perturbations. This complex response involves sensing touch and initiating physiological and genetic responses, leading to changes in form and structure over days or weeks. The process is triggered by physical forces such as wind, rain, or touch. Plants adapt to these stimuli by changing their shape and structure, which may include slower growth, thickened stems, or altered leaf development. Plants possess sophisticated mechanisms to detect even subtle mechanical stimuli and initiate responses. A variety of molecules, including calcium ions, jasmonates, ethylene, and nitric oxide, are involved in signaling these mechanical inputs. Touch can induce the expression of genes that encode proteins for calcium sensing, cell wall modification, and defense mechanisms. A plant exposed to constant wind may become shorter and sturdier. A plant that is touched frequently might grow more slowly to conserve energy and develop thicker cell walls. These changes increase a plant's resilience and ability to survive in harsh environments. Let's get Thiggy with it.