The jumping spiders name is Brando...he's a male Bold, and the bug bouncer in that cabinet. ZERO intruders. Good job Brando. This week was quite epic for the ladies. They got a nice new cabinet with lights and environment dialed just for veg. -Built a nice Veg/Dry cabinet from scrap. Pretty damn happy with myself...not gonna lie. 😅 I decided to just dive right in with some solid plant shaping. Still pushing slower than my previous run...but these 2 can take some serious LST with a good nutrient load. Impressive how fast they look back to that light. So far the organic run is performing better; how ever I didn't scorch the tits off these girls with a massive LED hammer when they were 14 minutes old either, so there's that. 😂😶 I'll have a true comparison of Organic Home Brew Ferts v Store Bought Ferts with the same strain here this winter...get actual data. Also: CannaBudget Studios was built with an old broken tri-pod / usb strip lights / old black sheet...and electrical tape. Yeeee. Time to go work on the farm. Hope everyone had a great week and the ladies are healthy. ✌️🌱

enjoyed growing this girl she grew well on low e.c took to training like a champ could have been better in coco but no complaint very good quality nice taste excellent high love growing on grow diaries wicked platform top people not much else to say thanks for everyone who helps reads comments ,likes and follows happy growing guys

Hi my friends! Thank you all for such amazing support on this sweet journey 🙏✌️💚 I'm updating and uploading daily so if week not completed yet. Please revisit to see full week content. So far everything is going great. Girls are are stretching nicely approx 2cm per 24h. It's looking that will cover entire scrog net with these 2 beauties. Simple plan for the week. Training on the net and maybe selective defoliation on week end. Week updates: 20-26 Nov. 20/11 day 43 Girls adapting well to net😁 21/11 day 44 First watering for this week. 2.5 ltr each pot. Runoff approx 200-300ml from each. Runoff Ph Xena 5.9 Athena 6.0. 23/11 day 46 It's seems that they stretched at least an inch overnight 😁 absolutely love my 🍌💜👊 girls. 25/11 day 48 Second watering for this week. Approx. 3L each 🤤 runoff 150-200ml. 26/11 day 49 Athena was stretching so much that decided for sort of heavier selective defoliation and cleared good bit under the net. Xena is at the same stage of flowering as sister but she is still much smaller, branches are shorter and tinner, will wait bit longer before go any heavier on her. Was able to nicely relocate longer branches of Athena all over the net. It's the end of this amazing week 😁 Thank you all for stopping by and for such amazing support on this bananas ride 🍌💜👊 Love you all brothers and sisters 💚💚💚

Last week showed the most progress. Lowered my light to about 22-24” and it just took off from there. The one that was not doing so well has started to show a lot more life this week.

🗓️ 6° WEEK FLO // DAY 36-42 (from switch) // DAY 113-119 (from dry seed) ⚡- Light: 30 cm / 250 watt; ⌛- Schedule: 12/12; 🌡️- 22° C - 65% RH average; 📑- PH 5.9 - EC 2.3. PH is dropping on the #2. I'll change the DWCs next week, meanwhile I'm trying to keep the PH in the right range; 💧- 7° DWC change; 🍔- Flowering blend: tap water EC 0.4 + Silic 0.5 ml/l + CalMag 1 ml/l + Hydro A-B 1.8 ml/l + Oligo Spectrum 2 ml/l + Green Sensation 1 ml/l; 🌱- Things are moving forward, both are gaining weight. 🆕- Last week I got the TrolMaster TCS-1 (@TrolMaster_Europe) and I started to track my grow box data. I will add these info once I harvest!

Nimmer lang ;) In den Wassertanks ist nur noch frisches H20

Daaaayum hot week last week, worried about 2 plants showing some wierd main buds, but it’s hopefully the heat. Smell is pretty nice and got some juicy fruits growing on them trees! ❤️

📅 03.05-21 (Harvest day 1) 📜 cutting all plants, roots looks great. New climat set. I will update the harvest step every day until the end. ⛆58 - 62% 🌡️ 18 - 22°c 📅 06.05-21 (Harvest day 3) 📜 ------- Nothing to say. ⛆ 56,7% - 62% 🌡️ 18°c - 22°c 📅 07.05-21 (Harvest day 4) 📜 Preparing the curing automated system ⛆ 57,6% - 63.3% 🌡️ 17.6°c - 22.8°c 📅 11.05-21 (Harvest curing day 1) 📜 ---- Curing in progress. ⛆ 57,6% - 63.3% 🌡️ 17.6°c - 22.8°c 📅 21.05-21 (Harvest curing day 1) 📜 Making hash with dry ice: 365 Gr harvested _____________________________________________________ 📅 Day - 📜 Note - ⛆ Humidity - 🌡️ temperature Equipment: Idrolab 12 bucks Chiller teco Hy500 weather controler with Co2 : PRO-LEAF BECC-B2 Bavagreen 720w Bavagreen 720w Bavagreen 240w Bavagreen 240w Nutrients and PH controller: PRO-LEAF PHEC-B2 Nutrients: Green House feeding - powder feeding hybrids | Powder feeding boost Extractor: primaklima PK250-A1 PK250-L1 x2 System and roots care: Idrolab Total care

Next week next experiences. Stop training and let the girls freedom. Hope they will appreciate that and boost buds as much as they can.

Week 4 for Black Lebanon by supersativaseedclub, Shes still pushing in size... Ive topped her twice since last week while letting the lower branches catch up with the top. Seems to be reacting very nicely 😎 Look at the size of her fan leaves already nearly the size of my hand. Probably the strain catching my eye the most during veg, makes me excited to open the tent everyday😂 To see her progress.

This is week 3 I only gave this plant just a tab of nutrient and it sent her into a growing frenzy. She has a slight scent and is already showing signs of flowering. Is this normal help!!

These girls are growing amazing. I did some defoliation and lollipopped them this week. Hopefully with more air flow at the canopy level and lollipopping, the tops and main colas can focus all the energy on growing some beautiful flowers. All in all Happy

08/21/2018 Day 1 week 3 Starting the week with second set of leaves,1st real leaves single leaves, second set is 3. It looks like one of the seedling leave is fading?.. Watching, maybe add nutes ? this week 08/22/2018 First root touching water! Here come the roots!🙏 for good week. Not sure when I add nutes. Maybe mid week. The codytledons (seedling leaves) are still healthy suggesting to me they still have nutes for seedling growth. 08/25/2018 More leaves,more roots,still no nutes,codytledons still looking good no fade. 08/26/2018 Uploaded root shots, codytledons may be withering away look closer tomorrow mornin 08/27/2018 Got up to 90° in tent, I turned on the red spectrum last night at 25%, Blue spectrum is at 100% Also some signs that codytledons turning pale, nutes coming soon 1/2 strength 💪 of course see how she responds increase as needed.

The haze berry have something wrong but i keep her till the end

After transplanting these are the plants who suffered more; Tangie#1 is very sad and small, with lower leaves turned yellow and burned at tips, maybe some potassium deficiency, also present in Tangie#2 but less

Día 34 de vida de las plantas, con un crecimiento optimo, mas o menos se han mantenido las condiciones de cultivo, se ha regado con agua unos 0,5 litros por planta con un PH de 6,1 y una EC de 0,4. Como preventivo de plagas he polvoreado las hojas con tierra de diatomeas, he aplicado un poco de LST y he colocado la malla SCROG para ir colocando las hojas según vayan creciendo. 2 de las plantas van mas avanzadas entrando en la floración mientras que las otras 2 se siguen desarrollando, la más pequeña de todas tiene un calzo en la maceta para que este a la misma altura de las demás, su tallo no se ha estirado y los nudos entre hojas están muy compactos. Estas son las condiciones de esta semana: Ventilación: nivel 50% oscilación 90 grados Extractor: 45% Humidificador: Off Luz: 76% con altura de 40 cm Ppfd: 550 umol/m2/s Periodo: 18-6 Humedad: 65% a 70% Temperatura: Día 23 C - Noche 20 C Vpd: 0,62 a 0,92 kpa Co2: 314 a 818 ppm Temperatura del sustrato: mínima 19,4 C máxima 21,9 C Humedad del sustrato: mínima 7% máxima 22% Productos y Marcas usadas: Indoor: MARSHYDRO 80x80x160 Led: MARSHYDRO FC 1500 EVO SAMSUNG Ventilacion y extracción: MARSHYDRO Controlador: IHUB PRO MARSHYDRO + Kit Sensores Medidor PH: Milwaukee PH 600 Medidor EC: Milwaukee C66 Sustrato: COMPOSANA Semilleros / LIGHT MIX BIOBIZZ Ph: BIOBIZZ UP / DOWN -Fertilizantes- BAC: GROW, BLOOM, PK, CALMAG ADVANCED NUTRIENTS: VODOO JUICE, BUD CANDY, TASTY TERPENES, BIG BUD, OVERDRIVE, BUD IGNITOR.

This was the final week. I had no choice to harvest early because pm was starting to settle on a lot of stuff in my garden. The UV light worked for like a day or two and it came back. It's just not worth it. It turned a lot of the buds hairs brown and the leaves did suffer a little damage. Part of that was the peroxide solution. I mixed a little too strong, and it didn't seem like it hurt the plants, but after a few days, they showed the damage. It just seem to burn the leaves a little not really the bud so that's good. There was three days of rain coming, so I wanted to get it cut down.I didn't intend on harvesting so early, and I have no place to dry this because other plants drying so I was forced into freezing it. I cut down branches and wet trimmed it into a bin and ran to the freezer every 10 minutes to get it frozen right away. I maybe could've dried it and had some decent flower but I figured this would be a good opportunity to learn about making bubble hash. I decided I wanted a stainless steel mixing vessel and found this beer brewer for a good price. I think it's gonna be solid. It has a nice drain at the bottom. Then I bought some 5 gallon buckets for spacers for my 5 gallon bubble bags I use the heat gun to peel the stickers off and to heat the bottoms up to make it a little easier to cut them out with the utility knife. I used the heat gun again to soften the edges a little bit so I don't damage my bags. I can't do my washes until I'm done trimming my flowers, but I got a 2 Inkbird temperature controllers to bring my studio down to bubble hash temperatures with my ac unit. I could wait a little longer until it gets colder but I'm not sure how cold it's really gonna get and I wanna get this done soon as I can. I'm gonna have to try it without a freeze dryer so that should be fun and I'm not going to micro plane it at all costs. I got 25 µm screens for drying that I will use a towel to wear most of the moisture out then see if it on to some parchment and I should be able to get my studio really cold and dry to get it dried relatively quickly. I'm seeing it recommended to be 30 to 40% humidity and 50° or so for about a week and it should be dry enough to press some rosin. I'm gonna try to separate out the full melt hash, but honestly I think I'm just gonna get a wide spectrum pool on this hash and just press it into rosin to make it easier to deal with. I kind of was trying to find the cheapest bags it's still decent and wasn't paying attention when I bought it really cause there's no 45 µm and my set and I'm saying that to be the lowest recommended the pool but also seeing a lot of people pulling some nice 25 µm so I think with my early harvest I might have some smaller truck head so I might not be a bad thing to have that bag as my lowest. I'm going to catch everything under 160 to 25.

Great week, all is going well. I'm glad that I keep these in my basement where it stays nice cool 25°C during this year's heatwave. I'll reduce some of the nutrients from next week on. Power buds in late flowering stage doesn't really do anything.