Likes
Comments
Share
@Gympaddy
Follow
The groundwork is laid, now we can get started. The field looks healthy.
Likes
5
Share
@Ogchemst
Follow
Flushing going g very well so far.
Likes
12
Share
The plant shows an indica morphology, this week im gonna transplant and top Her.
Likes
1
Share
Hello smokers and growers, back at it here for the dual pheno hunt going down. Found a male! Well, two actually, the Cold In the D by CAPULATOR is unfortunately a male (What should we do with it? Have 4 rooted clones ready) and one of the six Stardog Breath x Goat Supreme is a male (#4) ✅ In terms of vigor, Icing Kush #3 takes the cake. Took 2 clones of each Icing Kush and 2 clones of this mystery seed as well. After the long grow/dry/cure process we will smoke and decide the keeper pheno. The clone of that pheno will become a mother plant ready for producing more. Going to try and get each row filled with 1 strain at a time. This room will be 12/12 soon and we would like it to be perpetual. We now have our own genetics! get them here — linktr.ee/smokeyboro
Likes
17
Share
@Naujas
Follow
it's amazing, this growth looks much better than my first attempt, my decision was to put a smaller pot and change the light - the girl really liked it, FastBuds goriilla cookies with a small space manage perfectly:).
Likes
13
Share
Some of you may have wondered: Why do I use CO2 at average 950 ppfd μmol/m2/s (moral flow)? The answer is quite simple. Because of lack of space in some regions of my cultivation area, I simply cannot keep the ideal distance to my Sanlight high-performance lamp, due to some height growth of various strains. And so some of the main colas have ppfd values of 1250 μmol/m2/s and even more... So this is how I manage to achieve and compensate for such high radiation levels even with a CO 2 balance. And I have to say, my strategy to avoid various light stress symptoms works just fabulously. In combination with CO 2 implementation, my babies are simply unbeatably insensitive to light. Thats it! Beginning of 3rd week flowering: Again feeding my babies by 36 hours fermented potions of Bio Tabs Kompost Tea PK-Booster (15 g pro Liter) and added: 5ml Orgatrex/Liter 1 Spoon of Bactrex 1 Spoon of Mycotrex 1 Spoon of Mycco-Vital 1 Spoon of Dynomyco A little tip for those who are interested in small modifications that have a big difference or influence - on the result - effect - beauty - health - taste! Before adding microorganisms or beneficial bacteria or Mycorrizae and Trichodermas, please use oxygen-saturated water. On the one hand, unwanted chlorine gases evaporate and the small world of the microbiome becomes even faster and more rewarding in compost tea to sprout. Last but not least for this week, I would like to introduce my reasons, why I prefer growing biologically and sustainably. First of all, it’s something which suits very well in these times/days we are living now. Sustainability is a big need and task for our planet. 🌎 Nature means life. Our home, the air we breathe and everything that surrounds us. Not just today. Hopefully tomorrow as well. Maybe I'm starting to protect our environment on a small scale, but maybe I can also make a big difference at all. If you change the way you look at things, the things you look at change... I thought about what’s the difference, between Mineral Feeding and Super Soil Feeding. It’s very easy. Biologically Growing is a similar process than the natural soil activities out there in the lap of nature’s. So plants has to work and interact with the microorganisms and microbiomic communities in the soil. So the plants will never get lazy like the lazy ones of mineral feeding growers. If you grow biologically, you will feed the soil first and the microorganisms will support every parameter next to your plant conditions. And that will generate an unbelievable spectrum of Terpenes and Trichomes you will never forget. It’s the same comparison, when you daily visit McDonalds and you eat only fast food. How does your body and mind react on this shit for money?!?! May I invite you to think about it… See you next week dear Growmies! Have a nice Weekend and take care… Peace out! Addendum for Day 53: At the moment we unfortunately have another winter onset here in Germany. This means that I am forced to take additional heating measures due to structural facts in order to be able to keep the temperatures constant. After all, just tonight the thermometer climbs again to -1 degree Celsius. In addition, my exhaust air system runs out of my bedroom terrace and I therefore grow winter and summer with the patio door open. Well, sometimes I experience real weather-related challenges. But all in all, no problem... "Where there's a will, there's a way." Addendum to pouring out the fermented PK tea: I always administer half a liter of lukewarm aerated water with 3.5 ml of cannazyme per liter to each plant. This means that the "root machine" is not supplied with supplies unprepared and the nutrient solution can thus also be better distributed in the soil. Since I also work with cloth shoes, I spray them evenly moistened everywhere with water that is also warm before pouring them out from the outside. This has the advantage that the moisture stays where it should: in the pot! ... I did the math today ;-) We are still in week 7 until this Friday. And week 8 starts on Friday! OMG... still so much time yeahh! Today my Fast Buds Sour Jealousy and Sweet Seeds Big Devil and Dark Devil Automatics arrived. I'm looking forward to it. This time Fast Buds next Time Sweet Seeds. Love them too. Very beautiful genetics. Today a review video of the beginning of week 3. At the time of the pictures, I had minor signs of nitrogen excess. (Light peaks first at the crown of the roof and then slightly continuing to the middle section.) I then painstakingly racked my brains as to why this could be. I found that very slight dry spots had formed and therefore the root found small accumulations of nitrogen that caused its problems. But then, when I carefully homogeneously checked the moisture content in the substrate, the problem evaporated again. However, they had not shown any loss of growth rate during this time. Nevertheless, they developed as expected. They Strawnanas had no problem with that. In the end, I always have a hard time killing them. But I guess that's the way things go. We live and die. We come and go. But it's not there yet. ;-) Tomorrow is day 56. Tomorrow’s updating day! Can't wait to see their progress. Have a good time and see you tomorrow… 🏽🕊️ 🏽 ☮️🕊️
Likes
8
Share
Hello Diary, Milky Way F1 has completed its second week of flowering, a total of five weeks since the beginning of the vegetation. Although it is the beginning of the flowering phase, Milky Way F1 is full of flowers that develop really fast. The shape of the plant is usual, the main cola rises dominantly above the rest of the surrounding branches, which have all reached a similar height. If all these wounds are filled with flowers, I will be very very pleased. Some leaves dry up or turn yellow, so I mostly remove all such occurrences. This week I added supplements to both waterings. The first time I put the Easy Bloom Booster tablet in 7 liters of water and the second time I added Bio Flowering Booster. The conditions on the farm are good, the humidity is lower than 50% while the temperature is around 27, 28 degrees. Here is a quick overview of the week: 30/05/2023 - Day 31. Watering. I added one Easy Bloom tablet to 7 liters of water and lowered the pH. on 6.0 I watered all three plants with that amount. 02/06/2023 - Day 34. Watering. This time I added all three components from the Bio Flowering Booster kit. I also watered all three plants in the Box with 7 liters of water. 03/06/2023 - Day 35. Photo shoot for the end of the 5th week. Milky Way F1 - 53 cm That's it for this week. See you soon.
Likes
11
Share
This fine little chunky lady is finishing up just perfect! Nice dense buds, with an actual blue hue to them! Beautiful bud! Rock hard! Loving this little girl very much! Who's says ya cant grow fire bud in a solocup!? Looking at 1-2 more weeks!
Likes
35
Share
Venga familia, va la octava semana de vida y segunda semana de floración de estas Frosted Guava de Zamnesia. Añadimos la malla de Scrog hace dos semana. Que color que sanas se ven como se nota que Agrobeta es de lo mejor, las niñas están de 10. La humedad está en su punto, y por fin puedo controlar la temperatura en 24 grados. Ya vamos viendo cómo progresan estas próximas semanas y van formándose esas flores. Os comento que tengo un descuento y para que compréis en la web de Zamnesia de un 20%, el código es ZAMMIGD2023 The discount 20% and the code is ZAMMIGD2023 https://www.zamnesia.com/ Mars hydro: Code discount: EL420 https://www.mars-hydro.com/ Agrobeta: https://www.agrobeta.com/agrobetatiendaonline/36-abonos-canamo Hasta aquí es todo, buenos humos 💨💨💨.
Likes
Comments
Share
We’ve reached the eighth week, and the plants continue to tell their stories. Two of them have revealed themselves as males, fulfilling their role in genetics, while the others keep growing vigorously. The dynamics of the garden change, but the journey remains steady and promising. During flowering, I stick to my consistent approach: I don’t change how I provide water and biofertilizers. I believe regularity is the key to a healthy and balanced transition. Additionally, I’m not a fan of heavy defoliation; I prefer to respect the plants’ natural rhythm, removing only the leaves that fall off easily, as if the plants themselves are telling me they no longer need them. Observing each stage of this cycle is an exercise in patience and learning. Each plant has its own personality, and watching them is like uncovering a secret only nature can reveal. I can’t wait to see how the garden will bloom in the coming weeks!
Likes
31
Share
@MrJones
Follow
MrJones VIPARSPECTRA XS1000 LED 📜 SUMMARY - I have been given the opportunity to run the next generation of LED lights by VIPERSPECTAR, the XS1000! I set up a Stealth Cabnient and moved 3 Cream Manderain Auto XL.s under these lights, the cabinet set up is automated with WIFI light controllers, and INKBIRD Temperature and Humidity Controllers, I am very excited about this opportunity! Specs and Discount Codes Listed Below. 🔹🔹🔹🔹🔹🔹WEEKLY GOALS 🔹🔹🔹🔹🔹🔹 🌞Environment - 80F and 50%Humidity - using Humidfyer as needed. 💧 Feeding - Feeding with FOOP Canna Organic Nutrient Line 🍃Training / Keeping Stems Stable and Strait 🕷️ IPM - Will be using Green Cleaner" 1 OZ per Gallon, and CannControl from Mammoth alternating between product each month for Integrated Pest Management. 💡 Vegetation & Flower (new) Viparspectra XS-1000 Release on March 15th. 🔹🔹🔹🔹PLANT UPDATES🔹🔹🔹🔹🔹 🌱 Plant #1 - Week 4 this plant is stretching sideways and is about 14 inches wide not. 🌱 Plant #2 - Week 4 this plant is stretching sideways and is about 14 inches wide not. 🌱 Plant #3 - Week 4 this plant is stretching sideways and is about 14 inches wide not. 🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹🔹 ▶️Monday 03.15.21 / Rge gurls are recovering well from their topping and training! ▶️Tuesday 03.16.21 / Feed with 30 ounces of FOOP, the girls are doing extremely well! ▶️Wednesday 03.17.21/ Admiring their growth - keep adjusting their tie-downs, the plants are about 14 inches wide - across and about 7 inches tall - there are so many bud sites being produced here and the plant is about to go into flower, I am hoping for amazing results. ▶️Thursday 03.18.21 / Fed tonight with about 30 ounces of FOOP Nutrients - I just can't say enough good things about this product so far! ▶️Friday 03.19.21 / The sister plants of thee ladies are in flower, these girls are entering into flower a little slower due to more aggressive training, but decided to switch them over to the Bloom Regiment! They're kicking ass! ▶️Saturday 03.20.21 / Fed with about 30 ounces of Bloom / FOOP ▶️Sunday 03.21.21 / Fed with about 30 ounces of Bloom / FOOP 🔹🔹VIPARSPECTRA XS1000 LED🔹🔹 Amazon US: XS1000 10% off: in10MrJones http://yx-8.cn/0y-6 XS1500 5% off: in15MrJones http://yx-8.cn/0yA XS2000 5% off: in20MrJones http://yx-8.cn/0y2Y XS4000 5% off: in40MrJones http://yx-8.cn/0y5k Amazon Canada XS1000 10% off it10MrJones https://amzn.to/38udUVe XS1500 5% off: it15MrJones https://amzn.to/3esVUyr XS2000 5% off: it20MrJones https://amzn.to/3l5zAfg XS4000 5% off: it40MrJones https://amzn.to/3l7k5Uj
Likes
5
Share
Very happy with how this lady has performed, amazing quality buds, very sticky and dense flower with a concrete smell that I love so much, which is that kind of fruity sweet flavor that this lady is able to produce, it's been a beautiful journey, I'm gonna enjoy a lot this flowers. Very recomended guys!
Likes
58
Share
She fell over between transplant so its obvious she’s had some trauma. Will keep a close eye but I’m sure the will do just fine. Goal is to maintain temps and humidity at 80/60 this week. Was moved under 95W QB 3k
Processing
Likes
10
Share
Bueno entramos en semana 3 de flora... pasaremos usar pl booster y esperemos poder pasar led antes que acabe esté cultivo. El calor lo hace insoportable para las plantas están bastante resentidas a ver que tal sale! Salut y força al canut farmers!🔥
Processing
Likes
1
Share
@MrRaid
Follow
Think they ain't gonna stretch much now looks ok had to flush soil as she definitely dosent like alot of food light feeds for this strain maybe up It later on using very cheap led grow lights this setup is very cheap but it's for me to see the difference between a perfect setup to a budget setup still has most things she needs good airflow humidity is good can get hot as I didnt invest in ac but nothing over 28c most days they sit at 25c humidity 55% they growing quick even with no feed for 7 days this grow isn't at my home so only see these girls every 48 hours maybe 24 hours I'm feeling to check them day 35 and they stretched like crazy
Likes
13
Share
Saturday the 3rd of June day 38 of 12/12 starting to stack up nicely packing on some size smelling so good 🍁😁
Likes
10
Share
18 hours of light = 64,800 seconds 624 μmol/m2/s from the PAR meter Micromole μmol/s (micromole) is the unit in which P.A.R (Photosynthetic Active Radiation) is expressed. This unit indicates how many micromoles per second a light source emits. μmol/s is one-millionth of a mol (10−6 mol). 624x64,800=40,435,200