Likes
Comments
Share
Likes
Comments
Share
@Robom069
Follow
Going into the last weeks iam very happy with my plants they´re almost too big but i love the big buds and hope they get very dense left acid dough right black domina
Likes
16
Share
@peggyo
Follow
Soil used in 5 - 5 Gallon Pots RO Water 6.8 PH 40% FFOF 40% FFHP 10% PERILITE *1% BAT GUANO - 1 Handful per 10 Gallons EWC 1 Handfuls per every 5 gallons of soil LIME 1 tbsp per 2 Gallon of Lime Soil 1 - 3 Gallon Pot RO Water 6.8 PH 45% FFOF 45% FFHP 10% PERILITE Any comments welcome!
Likes
18
Share
my dry and cure style is this: 4 days of hanging upside down to get water activity lower to around 0.6 in 50% humidity and 26 C temp (i know its a little high but we are in a hot summer right now and i cant get it lower even with air conditioner) and then after 4 days of drying i remove leaves and stalks, trim buds and move them to jar for the rest of their life :D . and in the first 4 days of curing i open the jar door and let hem get some fresh air in the jar for about 5 minutes and close the jar door again, after 4 days of curing like that buds are smokable but they will get better as they getting cured about 1 month. buds are one of the hardest as fucking rocks type of buds! very dense , compact , sticky , smelly , amazing at every aspect growing stage was 56 days and flowering stage was 75 days total (harvested tops at day 64th) the total weight of dry buds was : (plant #1 & #3 top buds 56 G + lower buds 22 G ) 78 G + (plant #2 top buds 47 G + lower buds 18 G ) 55 G + (plant #4 top buds 120 G + lower buds 67 G ) 187 G = 367 G
Likes
10
Share
They took a long time to grow and mature 10 months in all. They produced amazing flowers with a genuine high. Left a lot to be desired in flavour profile however not awful to smoke. Would grow again for sure as they were a high yielding, ‘set and forget’ type of strain easy and resilient enough to grow and highly impressive to see grown outdoor.
Processing
Likes
15
Share
Start of week 6. Blueberry continues to be the hungriest of the group. The two OG kush are filling in nicely, lots of bud growth! The Super Lemon Haze is also showing beautiful bud growth.
Likes
3
Share
prima settimana, germinata il 17 dicembre temperature: 22 gradi 60% rh luci accese 15 gradi 60% rh luci spente
Likes
2
Share
Loving how these girls are growing Fastbuds mystery #1 finally catching up, and may possibly in the end being a better producer than the RQS plant, which is surprising to me because of how badly I stunted this plant. Got me curious how good this plant could’ve been
Likes
18
Share
@djghost
Follow
So alles schön getrocknet ergebniss auf der wage ist ok aber nicht das beste aber die qualität ist 1a 2 von 3 phenos waren rot 1 ganz normal grün und schmeckt eher nach Skunk die anderen 2 sehr fruchtig halt wie beschrieben. 1g pro 1 watt trocken gewicht ......
Likes
6
Share
@Patras19
Follow
Čusan tak proběhl sekec mazec. Mam rad spíše energii model tak jsem to sklidil bych řekl tak akorad. Na nějaký kouř tam bude za me spokojenost. Je cítit taková sladká zem, hodně intenzivní. Těším se mega na ochtnávku
Processing
Likes
4
Share
I let her heal under LED after the last major defoliation and moved her to the flowering tent after the first sign of new growth. She wasn't very happy under the intense light ( I don't ever work my plants up to it, i prob should lol) but she's starting to come around :)
Likes
2
Share
I've not had to trim any fan leaves they have all died on their own and I have just picked them off with tweezers apologies for the video I don't know what happened but I add smoked a doobie before 😂😵‍💫
Likes
36
Share
This week we are working on flushing these beauties; these plants have been awesome and harvest time is nigh! we started out with a Flawless finish drench, let that sit for about six hours; after that I ran about 4 gallons through each of them and let them rest for a day; ive repeated the 4 gallons of fresh water flush every second day for about 6 days now ( 3 flushes) and we are resting at a TDS of around 75. I look forward to harvesting these in the next few days. Stay tuned 🌱✨
Likes
107
Share
I'm gonna jump right in..👨‍🌾 The high stress technique I have used a couple days ago called super cropping, I (tried more or less) to keep the canopy under control and more even. This also allow lower bud sites to rise to the top and slow down the 'stretching'. 🌲🌲🌲🌲🌞🌞🌞🌞 The trade in doing it at this stage, is that the plant is also focusing more on healing the stems instead of total focus on the buds. But I'm probably early enough in the flower stage they will make it up by having more strong stems in the end. That's because the points they are broken now are gonna heal back more strong.💪💪💪 I've added some nutrients to help them heal. Aptus is working great with my organic soil👍😎💚 🌊💦 🌞🌞🌞🌞🌞🌞🌞🌞🌞 As you maybe have seen I've added some extra lights. This are Mars Hydro's new Adlite's. Here is some info about them in my own words.👨‍🌾 -IR 15, is a infrared light that is promoting extra photosynthesis. Basically long wave length of lights that will penetrate leaves and hit the stems, so the idea is stems will be more strong and be able to carry bigger buds. -UV 30, is a ultraviolet light that will try to mimic the radiation that comes of the sun. A little explanation about what this does to the plant in nature is that the plant will make it's own sunblock oil in the form of trichomes. So by adding this light the idea is that the plant is gonna work more to block this 'radiation'. -Deep Red 30, is like the title maybe already explained a red light booster. In nature the spectrum of the sun changes with the season, so it's easy to explain the sun will get more intense and contains more red in the summer. The wavelength of red is also pretty long like the 'infrared' these will sometimes penetrate leaves and hit stems and lower buds. The idea is more photosynthesis.
Likes
2
Share
@Ninjabuds
Follow
Divine jelly has some really interesting leaves they are pointy and small I can already tell this plant is going to show attributes that are not common. I’m excited to see what kinda exotic looking plant it turns into It’s day 41 from seed and all of the plants are really thriving
Likes
8
Share
There all swelling up and frosting up nicely. Definitely taking them 10 weeks maybe even 11 2-3 more weeks then the chop. Still a lot of white straight pistols between my two heavy yeilders
Likes
2
Share
Week 16 of veg, had these ladies vegging while I flowered the other 4 in my previous diary. They've been topped a few times, going to flip this weekend.
Likes
4
Share
My Strawberry Gorilla Automatic from Fast Buds is now in its third week of flowering, and I couldn’t be happier with how she’s progressing. She looks incredibly healthy, with vibrant green leaves and strong branches. The stretch phase is nearly over, and she has developed a solid structure with a well-defined main cola.🌱 One of the most exciting changes this week is the first appearance of trichomes on the main bud. Under the light, they’re starting to sparkle, hinting at the resin production that’s about to take off. The buds are forming nicely, and I can already smell a faint but promising aroma developing. So far, she’s responding well to the nutrients and environment, with no signs of deficiencies or stress. If she keeps going at this pace, she’s going to be a real beast by harvest time.😊
Likes
48
Share
SUMMARY: - I killed my first to tap-root seeds, I waited for them to grow "by the book" 0.5cm and I should have just planted, I saw them get worse and said "I must of messed up with something, lets wait another night until they bounce back" and instead they died. The next germination was super easy but my lights were too high, and the humidity was too low. All the fixes were done for the next weeks. Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Specifications:😎 Seeds: - 2x White Widow feminized seeds from Crop King Seed Tent: - 4x4x6 Mammoth Grow tent LED: - 2x Spider Farmer SF1000 LED (default 100 watt draw for seedling but will be bumped up to 125 Watt for flowering if not sooner) Pots: - 2x 0.5 L starter pots - 2x 5 gal smart pots after transplant Soil: - Pro-mix containing mycorrhizae and perlite, used for starter pots and mixed at roughly 1:3 ratio with Ocean Forest - Fox Farm Ocean Forest soil, used in the 5 gallon pots and mixed with roughly 3:1 ratio with pro-mix - note: pro mix was mixed thoroughly with ocean forest in the 5 gal pot, then pro-mix was used on the top layer, in and around where the transplant will be to help the early veg stage avoid getting too "hot" via nutrients. Nutrients: - Fox Farm Big Bloom - Fox Farm Big Grow - Fox Farm Tiger Bloom Inline Fans: - AC Infinity CLOUDLINE T6 6" (exhaust) - AC infinity CLOUDLINE S6 6" (active intake) - AC infinity 6" ducting Oscillating fans: - 2x Wind Devil 6" fans Carbon Filter: - 2x iPower Carbon Filter on both inline fans - note: carbon filter on intake fan as basement had mold issues in furnace room far removed but same floor, some mold issue in other room, cat litter in basement, thus, avoiding all risks and sleeping sound at night :) all mold was killed, scrubbed, cleaned, sprayed, painted, and sprayed again before setting up. Humidifier: - TaoTronics Cool Mist Humidifier Timers: - 2x Kuman 15A/1800W 24-Hour Digital Timer Overall: Good start to the grow, germinated 2/3 seeds, both growing and healthy. Both seedlings have developed their cotyledons and although they initially were quite droopy, they often bounce back to a decent upright/natural position. Third seed is undergoing "emergency germination" for the next 2 days as it experienced identical conditions to the other healthy seeds yet failed to germinate, likely due to its unviable nature. Waiting for extension cords to lower the lights further and a humidifier to hold rH steady in the next day or so. The seedlings appear to be reaching up for the light, stretching, but it appears to be within the acceptable range as they are upright and sturdy. The seedlings often get a little droopy, it is likely that this and even the stretching can be blamed on low humidity, temperature swings between low 60's up to 81 F. Nov. 2 - I killed 2 germinated seeds by waiting for tap root to grow to 0.5cm. - note: tap root looked great but was quite short so I waited another day for it to grow as instructed, the next day it looked like it had suffered, I assumed it was something I did like too damp, or too dry, but it really just needed to be planted before tap root grew to 0.5cm. So i waited another day to see the bounce back this time carefully ensuring right amount of dampness but when i looked it was clearly dead. RIP 😭 Nov. 3 21:30 - dropped seeds into water 14:30 - get seeds into paper towel nov. 4 1:00 - seeds moved to damp paper towel nov. 5 18:00 - both seeds crack tap root emerging nov. 6 7:45 - both seeds tap root growing very long and thin, - third seed still not cracked 8:30 - both seeds placed into soil and watered lightly - placed into grow tent and LEDs turned on - 24H for the first day - 18/6 for the rest nov. 8 6:45 - first seedling spouted cotyledons leaves 13:00 - seedling (cotyledons leaves) looks droopy 19:00 - light moved down to 30” 23:00 - second seedling has reach the surface and started to sprout cotyledons - first seedling still getting taller - third seed still not cracked nov. 9 15:00 - both seedlings given 50ml of water - watered around the outside of pot - pH of water = 7.81 - pH of runoff = 6.31 nov. 10 - second seedling has created serrated second set of leaves and stretched up to same height, but much smaller than first seedling. Summary of week: - A rocky but good start has resulted in 2 healthy seedlings with a decent set of serrated leaves. - MY growing pains and on the fly adjusting of grow tent climate likely resulted in a little bit of a tough week for the seedlings. LED hanging too high likely off the start (started at 60" and got as low as 30"), low rH (going down to as low as 40% and never really getting <60%), and poor temperature fluctuations (going as low as 61F early in the morning when the lights go off for 8H and as high as 81F when the lights are on for some time). - Luckily these factors did not do much damage but in all likelihood just resulted in a slower growth rate. - After initially planted into damp soil, I only watered once, with only 50ml for each plant and mostly watered around the edges of the pot.