The grape is still a little slower than her sister but was last time and she’s destined to be a smaller plant it’s in her genetics! Her max height is 120cm and that’s what I’m aiming for! The purple urkle is thriving! She’s growing an inch a day or so and producing so many extra branches! Thanks to dynomyco! I have added a new light in there too! Mars hydro TSW2000 so will get a better yield! I literally have no light loss! I’ll be flipping anytime soon now! As my elder girls are at 6 weeks nearly! I’ve also added a transparent PNG logo for WeedSeedsExpress for anyone else growing there strains just save the picture directly! And you can overlap it on videos and photos!

Flowering has beyond started, looks beautiful and healthy, smells fantastic lol. Hope these continue to bring me happiness. Just put the netting in, she is budding i believe hopefully i get some juicy nugs out of this

Lights got put up to 75% on the xs1000 as I saw signs of pre flower at the start of the week, and then she shot up 10cm overnight and carried on growing pretty quickly.. soon filled out the 45cm x 45cm space to the point I started to consider a little bit of training.. I ended up getting some pipe cleaners and pulled the side stems apart a little for air movement and light to penetrate better but I feel some light defoliatuion may be needed? She got her first feed of bloom and top max aswell as removed the first set of leaves after the cotlydons as they had finally shrivelled up and gone crispy.. thinking of stripping the lower 3rd of the plant soon as the stretch is over but unsure as its an auto and I wanted to keep her completely natural and hands off as I can, a few of the true leaves are starting to die off at the bottom which I probably will remove as they get to more than 50% brown but unsure of whether to remove some green growth or not...

Week 9 Update – Pushing Limits 🌿 Everything is running as it should, but AN#3 is completely maxed out—there’s no more room left in the tent. One thing is clear, though: the difference in stem thickness between BioBizz#1 and AN#4 is striking, likely due to Rhino Skin. AN#4 is also developing a gorgeous layer of frost as expected. ❄️ BioBizz#1 – BT35 The CalMag issue is fully under control now—she’s getting 140/40 and shows no visible deficiencies anymore. Overall, she’s in great shape! AN#4 – BT35 There’s a minor calcium deficiency visible on one leaf, but at this stage, it’s not a concern. Advanced Nutrients CalMag Xtra is doing its job well at 1ml/L. EC: 2.4 pH: 6.5 Drain: pH 6.1 (EC not measurable due to organic soil). AN#3 – BT31 She’s lagging slightly behind the others, though she should be further along. This is due to suboptimal conditions—she’s far too close to the light, and there’s nothing I can do about it. Supercropping is nearing its limits, but thankfully, vertical growth has almost stopped! EC: 2.4 pH: 6.5 Drain: pH 6.1 (EC not measurable due to organic soil).

Djjdjdd

For now she is getting only water and will be harvest soon.

Ya en macetas de 5 litros Estamos con los preventivos previos al paso aflore Ellas en pocos días afrontaron con buenas ganas en último trasplante, y de eso vamos a ir adelantando algún tiempo , ellas ya parecen que muestran su madurez sexual , así que ellas van calentando motores En días cviamos xliclo En nada empieza la marcha Un gran saludo

Hey:) I flipped them to 12/12, added some nutrients as recommended by biotabs and then just let them grow this week. They immediately started stretching a lot. Very minor defoliation of dead leaves, I also bought a scrog net but I’m asking myself if I should even use it, the top is flat enough and spread nicely. I count at least 10 nice main tops per plant, last grow I had about 4 per plant, I‘m really happy with the results so far:) Also the bugs are gone now, haven‘t seen any this week, my yellow sticky traps are completely covered though. Sadly the wasabi is clearly ahead already… I hope I can harvest them together without the wasabi being too much overripe, I would have loved to veg them a bit longer…

Dream Queen #1 tallest @ 5.5". Been a struggle this week trying to dial in humidity. Had ranges between 20-80%. Hope to get a humidity controller this week. Watering with leftover fish fertilizer from last feeding. Added 8 oz of worm juice from my worm farm totes. 20% runoff with 6.2 ph and 2900ppm. Crazy high I think. Watching to see how the react before I make any adjustments. 1/13 everything going as planned 2 dream queen and 2 g.s.c transplanted to 1 gallon pots

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Hey everyone ☺️. The lady is developing very well and beautifully 😍. I give her about 3 more days until I take a cuttings and the lady then comes into the flower tent 👍. The tent was cleaned every day of the week and the humidifier was refilled. I wish you all the best 👍 You can buy this Strain at : https://originalsensible.com/original-sensible-seeds-zkittlez~20503 Type: Zkittlez ☝️🏼 Genetics: Afghan Kush Indica x Grandaddy Purple x Grapefruit hybrid 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205W 💡💡☝️🏼 Soil : Canna Coco Professional + ☝️🏼 Fertilizer: Green House Powder Feeding ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.5 - 5.8 .

Hey everyone 🤗. This week the buds have continued to swell and smell better and better every day 😍. Since rinsing, she has only received Ph and Ec adjusted water to 0.4. otherwise there is nothing more to report this week :-). Stay healthy and let it grow 🍀🌱 You can buy this Strain at : www.Zamnesia.com Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Canna Bio ☝️🏼 Nutrients : Canna Bio ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3

All the plants seem to be developing well going into the later stage of flower. Some signs of possible deficiencies and nutrient burn on a few leafs but not too many. The smell again is increasing more and more to a sweet one. More defoliation and the use of sticks for more coverage. Light still set at 90% ✌️☘️🌱

Already week 7, and it’s starting with much better air humidity which makes it easier for me to stay in the recommended VPD range – currently 54% at 25 °C at canopy height. With 58, 67, 78 and 80 cm plants’ average height is about 71 cm. Odour has increased, and sometimes, but only shortly, I get the feeling the coal before the blowers cannot eliminate all of it. While the smell was a bit strange sometimes one and a half week ago, it’s now absolutely yummy, sweet and promising. As is all the sticky stuff adhering to my folding rule when I measure their size. I am a bit confused about the amount of yellowing leaves. That would indicate a nutrition deficit. On the other hand, last feeding (yesterday it was only calmagged water) brought some brown edges to their tips as I wrote. Which could indicate a slight over-nutrition. I am not *that* worried as leaves around the buds all look great (except for mentioned, but not youngest tips), and mature plants obviously tend to concentrate on bud production solely. But week 7 is quite early, or isn’t it? Any recommendations? Maybe I should go with organic fertiliser next time to avoid being stuck between two options ;) As they had run dry already, I gave each one another round of drink. Slightly less fertilised than last week. And I removed the lowest yellow branches and tiny buds that would not make it into the light in time. The Pineapples must have some mimosa genes crossed in. Each time I touch them they bow away their heads in deep dislike. The taller one looks like her head would be too heavy now … It is not, and usually they recover after an hour or so. The Sherbets are pretty unimpressed by all I do. Meanwhile I’ve been working on the Raspberry Pi BoxControl that should help me stay in better VPD ranges in the future. I am not sure how to translate this all into a more stable solution than based on a breadboard, but the state so far (and how it is supposed to work): Raspi runs headless with control software on autostart. Every minute temperature and humidity are received from a GY-21 I2C chip that should be hanging around plant tops. Data is saved in a database, VPD is calculated and signalled in form of a RGB LED color. Additionally, LCD display rotates through current stats. 3 relay modules can en- or disable misting, dehydration or an additional blower. Maybe I can add a CO2 sensor just for the fun of it (but I’d have to develop a device protocol myself), maybe even one or two soil moisture sensors. Theoretically you could also have a lighting control, but then, GPIO ports are all used. The display needs a lot of them, and while I can log onto the Raspi on my local network and view its desktop, I’d prefer to have a quick overview at place. I am not really informed about current models. Are some GPIO extensions or Raspis with extended GPIOs on the market? But so far, that’s all theory. I never had a PCB developed for my hobbyist projects, I am not the best with a solder station. Never had a Raspi run 24/7 for a really long time. Did a bit more lollipop ping in the evening. Especially tallest Shepard had fun building some more very low buds and branches. I think it can investigate its powers better on different places. Day 51: It’s getting hard to measure soil humidity with my low tech device. Soil must be full with roots and I don’t want to hurt them much. I can see them at the outlets of their pots too, sometimes a bit dry of course as these parts run dry earliest. Experiments to include the CO2 sensor in my test setup failed. I can read and reset it, but setting measurement mode and reading values don’t work. Maybe because my I2C library cannot use ClockStretchLimit. Running out of GPIO ports anyway and seeing that the soil sensors are analogue devices, I’ll probably revive my Uno too and have discovered some clever Raspi heads that should make a more stable setup (and some cooling) possible while also adding a handful of PWM ports and an integrated display. I’d like to include a camera module too and it would be great to have some ports available. A final setup would obviously include a Raspi 4 or 5 to easily enable secure online access. But so far, all working nicely in test setup. Day 54: Sometimes I wonder if they’re still growing at all, but then it’s good to have the daily pictures to compare bud width which now seems to be the main interest of the ladies, although differences are now clearer to tell between two day intervals. The taller ones look like they are one week ahead of the smaller plants, with even higher fan leaves turning pale now. Which at an estimated seed–harvest time of 8–11 weeks for both strains should be pretty common, I guess. Or am I wrong? Summerly temperatures make the temperatures at canopy level sometimes reach 31 °C, but at least the simple ultrasonic diffusers arrived and I am getting closer to a better environment control. I can at least switch the diffuser inside the tent remotely from my phone, and a deep bowl of water with a lid so the "fountain" produced will not wet the tent floor and one of the fans placed at the bottom now to lift its mist upwards seems to do the trick. Humidity increases while temperature drops, getting the plants into a better VPD level, so all I have to do is wait for the evil A to deliver the necessary Raspi components to have this automated, maybe still while this grow runs. At the end of this week, there was just a bit of height gain for the two smaller ladies who now approach their next 10 cm mark. Overall, I get the feeling it won’t be that long until harvest. Maybe with the taller ones a week earlier than the others. There’s really not that much bud growth anymore, rather refinements – like buds getting more nodes and color. I’ll investigate the trichomes every few days but would welcome your estimation.

👉Alrighty Then👈 👉Purple Punch F1👈 Had some real nice growth this week , had to do a little leaf management👈 Low Stress Training to pull the lower branches out .... We also did a topping of this one , as she was getting pretty tall 😳 Everything is looking good 👍sidenote , I am using my well water which is hard so I am having slight issues 😅 So ive up'd the nutrients to accommodate the moving to Flower ..... Soil by Promix Nutrients by Cronks Lights by MarsHydro.ca FC4800 X UR45 X Adlite Deep Red And Blue Tent 4x4x6.5 & Equipment by MarsHydro.ca High reflectivity inner mylar Thick Oxford fabric Smooth heavy duty zipper Sturdy metal frame Zipper blackout cloth Good anti light leakage performance The 6in Inline kicks ass moves alot of air Well this should be fun 🙃 Thanks to all my growmies out there for stopping by its much appreciated 👈 👉Happy Growing👈

Only took one video of both of my strains black moonflower and garlic fusion at week 5 you can find the other strains diary on my page they are doing good I topped week 5 and transplanted into 1 gallon . Looking alright the ones in the back are chic lit autoflowers from mendocino twenty twenty 5 weeks old topped and ones lst. Theese videos are before topping and after

Over all an amazing strain to grow and my first experience with this company and their seeds . The @futuregenetix company has many different strains and a newly released CBD line . It had a quick germinating time and was also very good with indoor led lights , bit is flourished outdoors under the sun . She didn't mind nutrients at feeding time and rarely showed yellowing or any issue with bugs and or environmental conditions . The best was it had a great deal of resistance to bud rot and pm . I live in a area which has wet humid and cold flowering times which are usually crop killers. It's good with training and did well with topping and lived a while in a small pot till getting put into the ground . Just a bunch of dense nuggets and frosty buds are my return in the end it's looking to be one of my best outdoors buds in bag appeal and terps . Will be growing these genetics in my garden again for sure ..

She looks so beautiful,unfortunately I could achieve the form I wanted with lst because she was planted too late but I'll grow a big rounded bush of this beautiful strain for sure, and also I can see a few leafs burned because when I started training her the leafs were to close to the tex of the pot and she got burned with the extreme sun that we have here in spain on summer,however she's thriving perfectly and she's ready to give the best in flower,let's see how this gorilla strain performs

Welcome to Flower Week 4 of Kannabia Clementine Slush BioBoost Edition Need a Fail-Safe Germination and Express Flowering?Kannabia Makes It Easy with BioBoost, Sproutly and Its Fast Genetics . More informations to find at The Kannabia Blog on GrowDiaries. Check out Kannabia Seeds with my link [https://www.kannabia.com/de?ref=61966] and grab the germination device or the strains I used . Trust me – it’s worth it for sure ! Get another 20% Discount at all products using the code [GGD] at the checkout For this Project , I’ve chosen the Feminized Photo Strain Clementine Slush BioBoost : Here’s what I’m working with: • 🌱 Tent: 225x150x150 • 🧑‍🌾 Breeder Company: Kannabia Seeds • 💧 Humidity Range: 50 • ⏳ Flowering Time: 65 Days • Strain Info: 21%THC • 🌡️ Temperature: 26 • 🍵 Pot Size: 20 • Nutrient Brand: Hy-Pro • ⚡ Lights : 600W x 2 A huge thank you to Kannabia Seeds for allowing me to try my Best with this amazing collection from Photo Strains they managed to Sponsore . Big thanks for supporting the grower community worldwide! Your genetics and passion speak for themselves! Let’s grow together – and don’t forget to stop by again to see the latest updates! Happy growing! Stay lifted and stay curious! Peace & Buds!

Looking great add more bloom