Likes
Comments
Share
Temperatur angepasst und leicht begonnen zu düngen
Likes
6
Share
In week 8 iv come to the sad realization that nearly all of the plants are at different stages of development. Dispite all the seeds being germinated at the same time. So iv had to take them off the wilma systems and am feeding them manually and there all on different diets. Which is an absolute headache especially as there is 16 plants to tend too. I think iv bit off abit more than I can chew for my first grow I maybe should have started with a couple of plants. I think the large wilma setups are designed for clones really so you know they are all going to progress and eat the same amount at once. It's not for autos . There all looking healthy though:)
Likes
11
Share
3/28/25 chopped and humidity was a little high starting off 3/30/25 have them drying at 60% and 70° 4/3/25 Still needing a day or so of drying to be at a stable humidity Beautiful plant. Fan leaves with Triched out patterns visibly everywhere. Even though i chopped quite a bit off of the plant, i still got quite a bit bigger yield than i expected. All sizable nugs. Pulled 65 grams.
Likes
6
Share
@Bncgrower
Follow
The aroma of Gelato #41 is simply exceptional, to the point that it fills the entire room with its intense and captivating fragrance. Each cultivation only strengthens my admiration for this strain, which will definitely remain one of my favorites, both for its quality and the sensory experience it provides. *** Gelato 41 has a sweet and creamy aroma, with notes of vanilla, berries, and a citrus touch. The flavor is smooth and creamy like a dessert, with lemon and mint on the exhale.
Likes
6
Share
Sollten es mehr als 50g gewesen sein, so wurde der Rest natürlich ordnungsgemäß vernichtet. Auch hier das selbe bild wie bei der Terpingdale, weil ich Narr beide auf einen Haufen warf.
Likes
4
Share
* 10/22 -Cherry Cherry Cola Auto - 10/22 - 9.5 Inches * Thus far no concerns and she is growing vigorously, switched out Myco (Using Myco+ from Element) and increased nute and clean water feeds to 1 gallon per day offsetting the clean water and nute water feeds. Lite LST with bend clips applied yesterday (10/21). * End of Week - Veg week 5 - 10/28 - Thus no issues or deficiencies, slight increase of veg dose - Defoliation will begin next week.
Likes
7
Share
@Shinobi
Follow
Nevidel som ich 2 týždne🤪🤪veľké búrky dažde vyzerali pripravené.trichomy mliečne90%hnedé blizny.pre mňa výborné.mier
Likes
Comments
Share
@Muuuy
Follow
Week 4 is flower-week! All of our ladies showed signs of pre-flower last week, now there are already visible buds growing. We had to adjust the height of #1 & #2 once again because #3 is just growing crazy. Can't go any higher than the current position without redesigning our whole setup so this will be the final adjustment (hopefully!). #2 is obviously very different from the other ones, she's a little behind in growth. Though, she does have outstanding red colored petioles in comparison to her mostly just green sisters. We increased the amount of nutrients for them since they'll need much more now. This is plant #3/3. She grows way too high for our liking but that's what we expected from the beginning anyways. We continuosly had to adjust the light and the height of the other plants until we can't go higher right now. So wherever #3 wants to grow to now, she's probably getting sunburned from our lamp.
Likes
8
Share
@SkunkyDog
Follow
Hallo zusammen 🤙. Habe sie heute geerntet. Sie wird jetzt 3 Wochen trocknen und dann kommt die Beurteilung. Bis in 3 Wochen
Likes
3
Share
@Kardo
Follow
Die Blueberry wurde getoppt hat ihr gut getan der Training
Likes
2
Share
@4mile
Follow
Just water mollasses and fruit water from here on
Likes
13
Share
I'm being very consistent with training her under the trellis. I'd say she will be ready for flower in about a week😀😀😀. I'm so happy for how she pulled through my bullshit. Not to mention my 3 year old nephew got in my tent and tore what little leaves she did grow in the beginning. Man this girl is a survivor. Watering every 10 days or so with a light compost tea to keep the microbes on point.
Likes
9
Share
I'll be using the 5x5 for my photoperiods Everything is starting to pop out of the soil now. Waiting on 2 more to pop out and that will be all of them🤞👍 FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny Thanks for taking the time to read and check out my diary🤜🤛 CHECK OUT MY OTHER DIARIES TO SEE WHAT BREEDERS AND STRAINS I AM GROWING👍 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 
Likes
16
Share
I had trouble with my humidifier set up so she only took 5 days to hand dry . Fortunately I purchased a programmable humidifier so moving forward it’s all gravy. After everything was cut from branches & weighed she ended up yielding 20gs of some airy foxtaily bud. I knew this would be a disappointment so we’ll just wait to see what the smoke is like , what the smell is like , & what the taste is like .
Likes
8
Share
@HitMan_DW
Follow
I'm glad I found GD it's helped me asking the prices of this very First Ever grow... plug.. I learned allot and have started germinating my next set. On to the next One/Week...
Likes
19
Share
@HinduGod
Follow
WOW LOOK AT DAT!!! DA SUNGOD WAS HERE FOR A FEW DAYS!!! DEN I BROUGHT IN DA RAINGOD TO FEED DA PLANT!!! DA OTHER NIGHT IT GOT VERY VERY COLD!!! DER WAS FROST OVER NIGHT!!! DAT FROST GAVE SOME FROSTBITE ON DA TIPS OF DA PLANT LEAVES!!!😡!!! DIS COULD HAVE BEEN VERY VERY BAD!!! DAT PLANT IS HEALTHY AND STRONG SO DER WAS MINIMAL DAMAGE!!! GROWING OUTDOORS IN DA LATE WINTER AND EARLY SPRING IS VERY VERY DANGEROUS TO DA PLANT!!!! DIS IS WHY ONLY DA HINDUGOD TAKES ON DIS CHALLENGE!!!! PLEASE COME AGAIN!!!!!
Likes
5
Share
Feeling kind of anxious. I mean for starting a new grow. This ones were an ok first coco grow. I think the next one gonna be better. Tho the plants are great. Totally frosted, lots of popcorn but some good buds too. Smell is getting intense. I’ll start flushing this week and next one we chopp em.
Likes
2
Share
@Prof_Weed
Follow
Just removed some leaves and gave her a little bit fertilizer for bloom My first Cannabonsai, i am happy!!
Likes
Comments
Share
Likes
11
Share
@Budhunter
Follow
Harvest on day 91 of cycle , day 54 of flowering.. I could leave it few days more for sure however my ladt harvest is nearly finishing so I need to dry this plant as soon as possible hehehe.. Purple punch has really frosty buds, it didn’t grow as much as I wish(I had to move the plant to the toilet with my burple light as there was no space for 3 plants in my 2x4 tent) but they are looking insanely good, with a strong flavor of grape, I am impressed with this smell/flavour, all covered in trichomes, I can’t wait to smoke it.. So my way to harvest it is I cut it down on the main branch and hang to dry out.. all the plant .. I prefer dry trim because it’s way easier to trim.. so now I am gonna hang it for 2/3 weeks and then start trimming.. I will update yield and tasty as soon as I finish trimming.. Overall I am happy with the results 🙌🏼.