Likes
Comments
Share
Čus grouweři. Máme tu 26tý den květu a holky jsou stále zdravé a silné. Jen mi příjde, že by měly být paličky větší na to jak dlouho máme přepnuto. Nakvétat začali až 15tý den, tak třeba mají jen pomaý start. Zálivku mají 5l a zalévám co 5 dní. Vlhkost je 70-75%, tak se jim pres den snažim aspoň trochu větrat. ✊
Likes
19
Share
It has been under 24hrs since I dropped these babies into my hydroponics unit and they have already cracked and taprooted into the plugs, proof of amazing genetics!
Likes
1
Share
Drying in cardboard box hopefully it dries well and I'll be curing in mason jars
Processing
Likes
6
Share
We entered the second week of cultivation happily with good news the plants are recovering from the overfert. Growth is evolving # G4 was the one that had the most damage with the overfert its leaves were very damaged but despite everything it seems to have a minimum growth always to be worse.Great news at the end of the second week with 20 days it is clear that the plants have recovered from the overfert now is to focus because the plants are doing their part well.
Likes
5
Share
Week 11 harvest Chop chop down she goes What an easy and rewarding plant, she done great for my mistakes also and every person NEEDS a sweet forgiving women Amen Nice sweet spunky smell I would grow again for sure
Likes
13
Share
Last Week i did in my Opinion the last Defoliation and clean up the Bottom. But after a Week there are no light Penetration under the Canopy. So i decided to take a few more Leaves Deep Red runs all the 12 hours. Infrared 15 mins before light goes on and off. And UV Light every Hour for 10 Mins
Likes
14
Share
Likes
15
Share
@Waveform
Follow
Waiting for first signs of life … While we are, I thought I’d give you a short explanation on the software’s graphics in case you did not follow my first diary. The one to the upper left, as its headline says, is the temperature graph. Most important line is the red one, showing the leaf temperature measured with an infrared temperature sensor. As there are no leaves yet, it is pointed towards one of the pot’s wall at soil level. Air temperature from a sensor that usually hangs around somewhere around top level is violet, and the grey line is the outside temperature close to the tent, helping the software to determine if a main blower action will effectively lower temperature. As I learned from the first grow a plant day that corresponds to the natural day can cause enormous gaps both to temperature and humidity, I inverted the plant day now, starting their night at 11 a.m. So after the first day temperature will only vary around 1.5 °C, which is of course due to the low light intensity too. Humidity graph on the upper right is quite crowded. Main line is the blue one, tent air humidity, which on this first day was between excellent 65 – 70% most of the time. For the moment humidifier is electrically disabled. There is quite some excess humidity on the tent floor and no reason to push this any further. Outside air humidity is grey again and taken from the same outside sensor that reports outside temperature. The soil humidity sensors are simple analogue capacitive sensors which have their flaws. I am interpolating their measurements to have a somewhat smoother reading, but as you can see from the turquoise humidifier reservoir reading (in legend named as plant soil hum 1), they can get confused when humidity is very high and start to report random numbers for some time. The most important graph for all growing stages is the lower left one, where the pink line meaning plant VPD should be inside the green optimum range for somewhat perfect conditions. This cannot be attained all of the time – dehumidifying isn’t as easy as humidifying –, but software tries its best to do so. Outside VPD is grey again. The last graph is more for amusement than anything else. The light intensity sensor is hard to position correctly, and everything you see about illumination and DLI (orange and green, plus grey for the accumulated 24 h DLI) should be taken with some spoonful of salt. Any resemblance to real world professional instrument readings can be considered purely coincidental. The violet line is the CO2 reading from such a sensor, and you can see that its tiny peaks correspond to even tinier black peaks at the bottom of the graph, reading TVOC values which in this case, once they will be more than possible measurement irregularities, can be interpreted as smell. ------- End of week 1: All seeds germinated. I wasn’t at home most of the time, and it turned out using the humidity sensor to monitor the humidifier’s tank wasn’t good for the stability of the system. Arduino crashed, so there are no pictures yet and no graphs to show. I have the feeling light was a bit low as the seedlings grew a bit tall, but with lights now up to 20% I guess this problem is fixed. More tomorrow when I have some more data to share. Even more end of week 1 (I extended this week to 9 days as I cannot tell when the seedlings started to show): Lights are at 40%, meaning 40 W in total. No reason to give them new water until next week. As some flies showed up from the BioBizz soil, I added 2 yellow cards. So far, everything in normal ranges. I’ll switch the control to grow phase soon which will raise the VPD slightly by 0.5 kPa. It’s interesting to see the CO2 level started to climb by 50% during their last night and has not come down to baseline afterwards. I restarted the app to check if the sensor had lost its calibration, but it still sits at around 660 ppm now.
Likes
25
Share
This was a lot of fun. Looking forward to growing more like this one. **Update** Total dry weight was 2.6 oz (74g). The buds were a little airier than the Tangie'Matic, not as tight/dense. Placed dried buds in mason jars with Boveda 62rh packs. Will be opening the jars daily for the next couple of weeks to cure. So far it tastes nice, I can taste some mint, but mostly just nice tasting overall. Will update the taste again after further curing.
Likes
76
Share
@Roberts
Follow
Purple Ryder auto got her first lst today, and root pruning. She is under the Medic Grow Mini Sun-2. She is growing really well. Everything is looking really good at the moment. Thank you Medic Grow, Agrogardens, and Doctor's Choice.🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g
Likes
106
Share
@StarLorr
Follow
Welcome to my autø Øpium Diary. In this Diary: Seeds: Sponsored by Ðivine Seeðs Media: Pro~Mix HP *•ns Nutrients: Remo Supercharged Kit *•ns *•not sponsored ___________________________ Feeding: Wed 30Oct: 2L Remo/Recharge pH'd 6.5 Sat 02Nov: 2L Remo/Recharge pH'd 6.5 ___________________________ Did defoliation on Saturday 02-Nov-24 Her buds are exposed to the light and she looks great🤩 ___________________________ Thanks for stopping by, likes and comments are appreciated!👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨
Likes
14
Share
🌿 Amnesia Skunk Auto — Week 10 From Seed (Week 6 Flower) 🔄 Quick Recap — How We Got Here For anyone just joining us, welcome 🤝 This run has been 12/12 from seed, building structure early and transitioning naturally into flower without interruption. What we are seeing now is the result of consistency over intervention — letting the plant express while guiding environment and inputs with intention. Last week marked an important moment: 👉 minimal intervention until now… 👉 and then, a necessary defoliation to rebalance the canopy We’re now entering a phase where the plant is no longer building — it’s refining, stacking, and expressing fully. ⸻ 🌡️ Environment — Dialed for Transpiration & Expression • Temperature: 26°C • Humidity: 60% • CO₂: ~1000 ppm This combination is not random — it’s intentional. At this stage, we are pushing leaf surface activity (leaf VPD / EPD balance) to keep: • stomata open • transpiration active • nutrient flow constant This is why these plants are drinking ~1.8L per day in 14.5L soil. 👉 That’s not just “thirsty” — that’s a fully active metabolic system. When a plant drinks like this: • roots are oxygenated • nutrients are moving • photosynthesis is running efficiently This is exactly what we want in mid-flower. ⸻ 💡 Light Strategy — Full Canopy Activation We are currently running: • Top lighting • Inner canopy lighting • Under-canopy lighting All LED. PPFD varies between 800–1500, depending on plant height. This variation is intentional. Taller tops receive higher intensity, while lower zones are supported from within and below — ensuring: • no dead zones • active lower bud sites • balanced energy distribution 👉 The result: the entire plant is working, not just the top Airflow across all layers keeps: • heat pockets controlled • humidity consistent • gas exchange efficient The room is not just lit — it’s breathing. ⸻ 🌿 Structure & Canopy — Controlled Chaos These girls are… big. Not plants — bushes. Dense, wide, expressive. Until now, we kept a low-touch approach. But this week, it was time. ✂️ Defoliation We removed a significant amount of foliage. Some will say: • too much others: • not enough I say: necessary. What we targeted: • blocked light paths • restricted airflow zones • overlapping leaves with no functional contribution What we kept: • active fans driving transpiration • structurally important leaves • balanced energy zones 👉 The goal was not to strip — it was to open the plant. ⸻ ⚠️ Observations — Minor LED Stress During defoliation, we noticed: • minor bruising / light stress on some branches Nothing major, but worth noting. Likely cause: • proximity to high PPFD zones At this stage: • plants are more resilient • but also more demanding We’ll monitor closely, but no current signs of impact on flower development. ⸻ ❄️ Frost Development — Outstanding Trichome production is already impressive for this stage. Why this is happening: • High metabolic activity (drinking + transpiration) • Strong, stable environment • Balanced nutrition • Full light exposure across the plant 👉 Trichomes are not just genetics — they are a response to environment + energy availability What this means: • strong resin potential • terpene development on track • good signs for final quality ⸻ Nutrition — Feeding the Engine Current feed (~EC 2.0 / pH 6.5): • Terra Bloom → Core flowering nutrition (PK-driven development) • Green Sensation → Flower density + metabolic boost • Sugar Royal → Carbon allocation + terpene precursor support • Pure Zym → Root zone enzyme activity, breaking down dead matter • Power Roots → Continued root stimulation (yes, even now — keep the engine alive) • CalMag Pro → Buffering + stability under LED intensity ⚖️ pH Control • Down: Lemon Kick • Up: pH Plus 👉 All inputs aligned and consistent — no chaos in the root zone. Why this matters now: At this stage: • plant demand is high • transport systems must stay clean • energy must be directed to flowers This feeding strategy supports: • uptake efficiency • terpene expression • structural flower development ⸻ 🌬️ Airflow & Room Dynamics With this level of density, airflow becomes non-negotiable. We are maintaining: • constant air movement through canopy • no stagnant zones • balanced humidity across layers This was one of the main reasons for defoliation. 👉 Light feeds the plant 👉 Air keeps it alive ⸻ 👃 Aroma — Loud Already For this stage… these girls are loud. This early terpene expression usually indicates: • strong genetic potential • healthy metabolic state • proper environmental conditions ⸻ 🔮 What to Expect (Week 7 Flower) We are entering the phase of: • bud stacking • density increase • trichome expansion What to expect: • visible swelling of bud sites • increased resin coverage • stronger aromas What not to expect: • explosive vertical growth (stretch is mostly done) • major structural changes Now it’s about refinement, not expansion. ⸻ 🤝 Final Words — Gratitude To everyone here: • the OGs • the new growers • the silent watchers • the commenters • the skeptics • the supporters • the ones showing love here • and the ones talking with us across platforms Thank you. To GrowDiaries — for giving us this space. To the community — for keeping it alive. To the genetics — for the expression. To the LEDs & tools — for enabling precision. To Plagron — for consistent nutrition. And to everyone following this journey: 👉 This is not just a grow 👉 This is a shared process From grower… to growers 🌱 📡 DELETED @ 1K Please stay tuned.we never quit https://www.youtube.com/@TheDogDoctorOfficial NEW 🙏 Thank you for your patience and continued support. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial 📲 Don’t forget to Subscribe and follow me on Instagram and YouTube @DogDoctorOfficial for exclusive content, real-time updates, and behind-the-scenes magic. We’ve got so much more coming, including transplanting and all the amazing techniques that go along with it. You won’t want to miss it. GrowDiaries Journal: https://growdiaries.com/grower/dogdoctorofficial Instagram: https://www.instagram.com/dogdoctorofficial/ YouTube: https://www.youtube.com/@dogdoctorofficial Deleted by Youtube - https://www.youtube.com/@TheDogDoctorOfficial NEW Vimeo : https://vimeo.com/dogdoctorofficial Under construction stay tuned ⸻ Explore the Gear that Powers My Grow If you’re curious about the tech I’m using, check out these links: 🔆 Lighting & Environmental Control • Future of Grow — Advanced LED lighting technology https://www.futureofgrow.com/ DISCOUNT CODE: DOG20 • Lumiflora — Under-canopy LED lighting https://lumiflorade.com/ • TrollMaster — Environmental controllers and automation gear (past collaboration) ⸻ Genetics • Zamnesia Seeds — Genetics used in this project https://www.zamnesia.com/ ⸻ 🌱 Soil, Substrates, Boosters & Root Support • Plagron — Substrates, bio mixes, and supportive products https://plagron.com/en/ ⸻ 🎒 Storage, Curing & Preservation • Grove Bags — Curing and storage solutions https://grovebags.com/ ⸻ 📸 Photography Equipment & Tools (Not sponsors, but part of my creative toolkit) • Sony A6700 • Sony full-frame macro lens + few more • Stacking photography workflow - learning • iPhone (for behind-the-scenes shots) We’ve got much more coming as we move through the grow cycles. Trust me, you won’t want to miss the next steps, let’s push the boundaries of indoor horticulture together! As always, this is shared for educational purposes, aiming to spread understanding and appreciation for this plant. Let’s celebrate it responsibly and continue to learn and grow together. With true love comes happiness. Always believe in yourself, and always do things expecting nothing and with an open heart. Be a giver, and the universe will give back in ways you could never imagine. 💚 Growers love to all 💚 📸 P.S. – The Eye Behind the Lens All photos in this diary (for now — except for the ones showing the camera, which I took with an iPhone) are taken with a Sony A6700 paired with a Sony full-frame macro lens and a few more. Photography is part of the story — it’s how we share the fine textures, the glow, and the quiet details that words can’t always capture. I’ve also started experimenting with photo stacking — a technique where multiple images, each taken at a slightly different focus point, are layered together to create one perfectly sharp image from front to back. It’s not digital enhancement or AI; it’s pure photography — a way to reveal the plant’s beauty in microscopic depth, from trichome to petal. You’ll even see a few shots of "ghost me" capturing the shots — camera, lens, setup — because every grow deserves not just to be cultivated, but documented like art. FOR DISCOUNT CODES AND MORE JUST FOLLOW THE LINK https://website.beacons.ai/dogdoctorofficial NEW DISCORD - Official Server Invite Link : https://discord.gg/ksjAkA5T74
Likes
4
Share
@UrbanBoer
Follow
Talk about a mission accomplished, dam you Lamby… you had me excited at one point when I thought you were an auto, but to my shock, you are a regular, you just have a long ass flowering window… at least unlike her sisters within the 4th cycle, she did not reveg she just focused on flower, the buds are bulky and firm, scent is amazing, you would mistake her for a cheese strain. I should not be disappointed by the plant’s size! Because I planted her during winter, and all outdoor or greenhouse(unless you have a GH that is climate controlled), do not grow as big as the would during spring or summer season, and due to this factor, I only got 59g of wet bud. But I have faith the other ladies will produce a higher yields. Last I smoke this strain was earlier late summer or early Autumn, and from smoking to growing now harvest, I wish I am blown out the water with this strain, it’s time to conduct that questionnaire. Or even better go to an established cannabis club, and get them to samples bud, and ask for a review.
Processing
Likes
3
Share
week 9 was a good week I watch my pollen sacks grow into beautiful pods cant wait to use it plant doing pretty good health and strong
Likes
24
Share
*****Week 14 growth – March 6 to 12, 2021 – Week 5 flower ****** This girl keeps chugging along. Her resin rails are looking awesome. A little dark green maybe but not worried. Looking for some bud swelling to kick in!! Bud Fusion being introduced this week. Into the last phase of feeding during flower now. Nitrogen is continued to be reduced as its late flower. Keeping up the feeding ppm this week as we are getting to the end. May be pushing them a little more than I should but finding out how they react for next run. Still continuing to play with the light intensity and seeing how the girls react to my environment conditions when pushed harder. Could have backed off and stayed with 100, 300, 600, 900 PAR levels at the different stages but I have trying to go a little higher in the late stages and going over 1,000 PAR. Little more detail….. Mar 6/21, Day 29 - Dry out day - Changed light cycle to 11/13 today to help with light intensity and reducing DLI. - Light power reduced to 425 watts Mar 7/21, Day 30 - Keeping up the feeding but reducing nitrogen. - feeding with micro – 1.5, bloom – 2.5, ult B – 0.5, carbs – 1, B Storm – 2, S Storm – 2.5, Bud Fusion 0.15gr/l, Terp – 1.5, Jet Fuel – 0.5, Rezin 1 - 1150ppm and 6.0pH - 2.5L Mar 8/21, Day 31 - Watering with 2L feed from yesterday and 16L plain water - Over shot the pH - 400ppm and 5.9pH Mar 9/21, Day 32 - Feeding again with Grow – 0.5, Micro – 1, Bloom – 1.5, Carbs – 1, Magnifical – 1 - Didn’t add many of the supplements - 875ppm and 6.0pH - 2.5L Mar 10/21, Day 33 - Middle of the week and just giving some enzymes today - Enzymes – 1.5ml - 300ppm and 6.1pH - 3L Mar 11/21, Day 34 - Microbes again today - Tap water with Jet Fuel – 1ml, Terpinator – 2ml, Nature’s Candy – 1.5ml, Rezin – 1ml, Ultimate B+ - 0.5ml, Recharge – 1tsp/gal - 800ppm and 6.0pH - 3L Mar 12/21, Day 35 - Dry out day - Been feed a couple of times this week so work with ¾ strength next week.