Sooooo this has been an amazing and exciting week! Ive been patient with this last plant and really checking the trichomes i inly wanted a few amber caps on the nugs, was looking for milky on this one! Shes smelling amazing and the color change was such a sight to see! She did so well with the nutrients and loved the 2 week flush i did! I cut her down did a wet trim and have em in the drying rack! Im excited to see how she cures and drys ready for the smoke reveal! Much love and happy growing!!! *check out the examples of the rewards from the traing i did with lst, hst, desolation love seeing this!!* learning this craft and style of growing is a blast! And everyone should try it!

Grow 004 CBD Crack & Gelato Portions are per plant - food in every watering Day 63 1,5L ph6,5 Been adding some Biobizz along in the mix, seems they needed a bit more food Day 65 1,5L ph 6,5 Day 67 1,5L ph 6,5 near plain water for the gelato , the cbd still gets some nutes Day 69 2L ph 6,3 last light feeding i think.. they are looking good ;D i guestimate harvest within 2 weeks? what do you think? ;) 20 liter air pots using biobizz light, perlite, microlife from Bionova and The ExHale Homegrown CO2 Bag

💚✌️

420 Fastbuds Week 9 Gorilla Cookies Auto Week 9 update for these two temperamental girls. They absolutely did not like the feeding I gave them a few feds back. Over all besides the yellow and crispy leafs they appear to be growing good. I'm only going to give them maybe two more weeks before they get the chop.

🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 Hi and welcome to another Kannabia grow! This time I’m running their Apple Fritter (feminized photoperiod). She’s going to veg under 24hr light and be manifolded. Still cleaning the rest of my Candy Cream GF (11.04.25) — going to sow the seed tomorrow (12.04.25) *been lazy, sowed on 14.04.25 🌸🍏✨🍭🌸🍏✨🍭🌸🍏✨🍭🌸 --- 💭❗💭❗💭❗💭❗💭❗💭❗💭 ❗Events & thoughts worth noting❗ 💭❗💭❗💭❗💭❗💭❗💭❗💭 12.04.25 (GW1) – Cleaning + flushing the old coco coir. Might need to add another brick. *No new brick needed ✅ This is how I recycle my coco coir — fast, cheap, no BS. 🌿 Harvest plant ✂️ Chop roots small — they stay in for structure (organic perlite) 💦 Hot water rinse — remove salts & dust 🍶 Pre-soak with light feed:   Micro 10ml   Bloom 0ml   GreenBuzz 10ml   Cal-Mag 60ml   FFJ/FPJ 10ml (new disgusting batch)   pH down (citric acid) ♻️ Media stays — Roots stay — Back in service. 14.04.25 (GW1) – Planted seed in final pot ✅ 16.04.25 (GW1) – Did last tent clean up + setup ✅📸 17.04.25 (GW1) – Seed germinated 🎉📸 — roughly 48hrs in final pot. Solid start👌♥️ 23.04.25 (VW1) – Minimal burnt tips 📸 — not progressing, not a concern. 26.04.25 (VW1) – Started using the new batch of FPJ/FFJ https://growdiaries.com/diaries/266849-grow-journal-by-yan402 30.04.25 (VW2) – Increased TriPartMicro & GreenBuzzBloom 10ml → 15ml 03.05.25 (VW2) – Increased TriPartMicro again 15ml → 20ml, topped the plant, and added final layer of clay pebbles around the base, trimmed side branches and did LST in preparation for "manifold" 📸 08.05.25 VW3 finished manifold📸 13.05.25 VW4 Increased TriPartMicro to 30ml and GreenBuzzBloom to 20ml. 15.05.25 VW4 Done defoliation and LST 📸 18-19.05.25 VW5 pruned all the shoots bellow my "mains" and did a full defoliation📸 24.05.25 VW6 increased GreenBuzzBloom to 30ml 04.06.25 VW7 did a cleanup📸 11.06.25 VW8 increase TriPartMicro to 40ml 17.06.25 (VW9) – Final structure pass 💈🌿 Did a clean perimeter prune + removed weak shoots. Ended up with 12 tops, was aiming for less, but she made the call Didn’t fight it, just shaped it the best I could Airflow’s good, structure’s stable 🛑 No more cuts until post-stretch Pics coming shortly 😘 Flip coming soon — we’ll see how she handles it. 20.06.25 VW9 Switched lighting to 12 hours, may the stretch begin 🤞 22.06.25 VW10 Did a good LST session,made some pics, and came to some conclusions and a small change of plans: Originally planned for 8 mains — long, spaced colas and maybe a couple stronger “titans” if she wanted to go that way. But she’s showing me something else, and I’m not here to fight her — just guide her. Now after stretch, I’m keeping side shoots only if they: Fill real canopy gaps Don’t crowd neighboring tops (minimum 15cm spacing) Aren’t growing into walls or toward the next plant Anything too close, too low, or heading into shade gets removed. No point forcing it. Looks like I’ll finish with 14–16 solid tops, depending on how she settles. I’m just trying to give each one enough light and space to stack properly. No overcrowding, no larf — just letting her do her thing with a bit of structure. Increased Tri Part Micro to 50ml as well. 28.06.25 VW11 one week since I flipped to 12/12 and she is stretching nicely, a bit shy in showing pistils compared to the Fantasy Feast regulars I have in the same tent. 29.06.25 VW11 increased GreenBuzzBloom 30→ 60ml 06.07.25 FW1 TriPart Micro: 50→ 30ml TriPart Bloom: 0 → 20ml Home-made FFJ/FPJ (Watermelon + Pumpkin): 10 → 30ml 12.07.25 FW1 GreenBuzzBloom 60 →40ml, TriPart Bloom: 20 → 60ml, fpj 30→60ml 19.07.25 FW3 Got some bleached tops, been out and about at job interviews and didn't notice a last minute stretch spurt 😭, should recover fine though plenty of time left 😁 22.07.25 FW3 TriPartMicro 30→20ml , TriPartBloom 60→80ml , GreenBuzzBloom 40→50ml 24.07.25 FW3 Cal-Mag 60→40ml 26.07.25 got thrips but handled them with extra airflow and defoliation. 29.07.25 FW4 GreenBuzzBloom 50→20ml, Home-made FFJ/FPJ (new batch) 60→120ml 31.07.25 FW4 Home-made FFJ/FPJ (new batch) 120→200ml 13.08.25 FW6 CalMag 40 →30ml, GreenBuzzBloom 20→0ml 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 🌿 Day to day tasks & actions 🌿 🌱💦🌱💦🌱💦🌱💦🌱💦🌱 09.08.25 FW5 – Fed 5l of #1 at 50%→ 2l runoff 10.08.25 FW6 – Fed 5l of #1 at 25%→ 2l runoff 11.08.25 FW6 – Fed 5l of #1 at → 2l runoff 12.08.25 FW6 – Fed 5l of #1 at → 2l runoff 13.08.25 FW6 – Fed 5l of #1 at → 2l runoff 14.08.25 FW6 – Fed 5l of #1 at → 2l runoff 15.08.25 FW6 – Fed 5l of #1 at → 2l runoff 16.08.25 FW6 – Fed 5l of #1 at → 2l runoff (*RUNOFF reused for tomato plants) 🍶💧🍶💧🍶💧🍶💧🍶 💧 Nutrients in 30L #1 🍶💧🍶💧🍶💧🍶💧🍶 TriPart Micro: 10 → 15 → 20 → 30 → 40 → 50 → 30 → 20 ml = 0.67 ml/L TriPart Grow: 0 ml = 0.00 ml/L TriPart Bloom: 0 → 20 → 60 → 80 ml = 2.67 ml/L GreenBuzz Bloom: 10 → 15 → 20 → 30 → 60 → 40 → 50 → 20 → 0 ml = 0.00 ml/L Cal-Mag: 60 → 40 → 30 ml = 1.00 ml/L Home-made FFJ/FPJ: 10 → 30 → 60 → 120 → 200 ml = 6.67 ml/L pH Down: Citric acid (BuxXtrade) — adjust to ~pH 6.0 📦 TOTAL: 330 ml per 30 L 🔬 11.00 ml/L 🍶💧🍶💧🍶💧🍶💧🍶 ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ Tools & equipment ✂️ ⚙️✂️⚙️✂️⚙️✂️⚙️✂️⚙️ ✂️ 2× MarsHydro SP3000 ⚙️ MarsHydro 150mm ACF Ventilator ✂️ Trotec dehumidifier (big unit) ⚙️ Mini no-name dehumidifier ✂️ Kebab skewers (LST – stainless) ⚙️ Wire + roast skewers (LST assist) ✂️ Scissors (HST) ⚙️ Vacuum (for spills & cleanup) ✂️⚙️✂️⚙️✂️⚙️⚙️✂️⚙️✂️⚙️✂️⚙️ --- 🍏🍪🌬️🍬🍏🍪🌬️🍬🍏🍪🌬️🍬 Apple Fritter (Kannabia Seeds) 🍏🍪🌬️🍬🍏🍪🌬️🍬🍏🍪🌬️🍬 Species: 50% Indica / 50% Sativa Genetics: Sour Apple × Animal Cookies THC: Up to 25% Effect: Euphoric, relaxing, creative Flavor: Sweet, fruity, pastry notes Flowering: 56–63 days Resistance: High Indoor yield: 450–500g/m² Outdoor yield: 600g/plant Structure: Strong, bushy, dense buds

Really starting to put energy into making some delicious cookies

Hallo zusammen 🤙. Habe sie heute geerntet. Wir sehen uns in 3 Wochen mit dem Erntebericht.

*ADVISE NEEDED* The day before yesterday I discovered a huge error in my system. I placed filter material in the feed-throughs of the breeding boxes. This is to prevent the roots from growing together over time. However, what I caused with that is very difficult to explain. The bottom line is that the distribution of food and circulation was actually not good at all. This also explained the differences in the water temperature, but also PH and EC values. That is now completely under control because it now runs stably for 2 days. However, you can see that the records have had a bad start. I am thinking about starting over. Week 3. Week 2 was looking for the correct settings for my system. I found out that the temperature in the bins is quite different. When I set the water chiller to 19 degrees, it all flows fine into the first container. There it rises about 0.5 degrees per bin. The margin of the chiller is about 1 degrees, causing too many fluctuations in the system, with tray 1 becoming too cold and the last one too cold. I solved this by shielding the box at the inlet of the tent with heat-protective foil. I also put a fan on the water chiller. If that catches on, the entire loft heats up, whith more fluctiations. However, I have enough space to measure very precisely and I am getting more and more control. I think the brown leaves were the cause of much too hot water. Since I have the water temperature under control, I see that the new leaves are growing nicely. Moreover, since yesterday (13-5) I received the nutrition. 10 days late. I just finish the root scheme I think. That is still 3 days a 70 mm per day combined with BioBizz Heaven. I tried to take some pictures of the roots and some close ups. I hold the lid with my left hand and with my right hand I try to take a picture zoomed in (max). While the wind makes the roots dance past my lens😵 Something different than usual ... Hope you like it. If you see something that needs to be addressed, let us know. It is my first breeding so there will undoubtedly go wrong. This week I also connected the water reservoir with which I can flush the entire system at once. With this I also control the Ph in the system. Will post photos soon.

_____________________ | ROYAL CHEESE HARVEST | |_____________________| Whats up!! Harvesting a little earlier than when i would like, because of the rise of bugs that appeared last days due to climate conditions... this year temperatures are oscillating more than usual having 1 rainy week, then a sunny hot one just after it rains.. In fact, last year, it did not rain until November So the plagues were on the leaves, mildew powdery(just a coulpe of leaves),aphids(like just in the leaves of one cola), and some caterpillars almost ready to get out and start eating all the buds, (hopefully i cut that day).. Sounds bad, but the parts of the plant affected was only the leaves... and means that a proper cleaning is coming so removed all the leaves and the result is what you can see, that bonsai.. Spotted 2 dead material points in big colas, that i removed after drying.. I did not weight the plant wet because of the smell that i had on my house that day, things went very tense, i was a bit busy, and even, it has not much sense to me, im better weighting the dry material. So at the end i think im having very good quality, and the affected parts are less than i thouth at first, so im very happy with the results.. On the scales are the best buds, the rest is the lower part of the colas that were less developed so im doing hash with that part.. Been busy guys so im uploading more photos today ^^ I hope you like all the grow thank you for follow it :) Song: Eazy-E - Down 2 tha last roach00000

Grow diary 11 stage 6 Day 51-60 This last 9 days she has continued to veg and stretch. I have been bending the tops of the 4 mains to try and get her as low as possible, she is the tallest of the 4 strains I have going even with multiple bends on the mains she is a good 9 inches taller then the wedding glue I have going. Don't think she liked the slight increase in nutes this stage. Hope she gets going into flower soon as she is way behind the others and I was planning on harvesting all plants at the same time.

2x2 homegrow 👽

11/21/24 Short facts: - Watered: 1 x 1.0L, 1 x 1.5L, 1 x 1.5L, 1 x 1.75L — 5.75L - VPD @ 1.4 — raised by 0.1 - Light @ 80% ~700 to 1050 PPFD - BioBizz Bio-Bloom increased to 3ml/L - BioBizz Bio-Grow increased to 3ml/L - Getting colder! At night between 18 to 19°C --------------------------------------------------------------------------------- There isn’t much to report this week. She’s doing fine, but she might need a little more CalMag and nitrogen. So I’m giving her some extra CalMag and a small amount of bonemeal. Since the weather is getting quite cold for the region - and we’ve already had a bit of snow - the cellar where my grow tent is set up is cooling down, with nighttime temperatures dropping to 18–19°C. Therefore, I’ve ordered some heat mats, which should arrive tomorrow. I’m aiming to stabilize the root temperature at around 22°C consistently, so the nights won’t be too cold anymore. I’ll go into more detail in next week’s update.

The permanent marker plants I think they are really going to stack nicely they didn't seem to like being topped the greatest they are healthy it's just the growth after topping the nodes are so close together it's hard for it to develop leaves. I think these plants would if done nicely growing them without topping them they are going to be nice and short. I'm still excited about bith the phone being very different and they are really starting to show different structure along with leaves This past week, the plants went from being weak little plants that had just been top and now they are on there way to being nice and sturdy. I could flip them to flower now if I wanted. I plan on letting them grow a few more nodes on each branch before I give them the flip. My hopes is I get longer colas if I let it ride out longer in veg cutting off all the lower growth b4 flower. I have had the light on 25% still but today I raised it up to 3o% I like to have them handling 40% nicely before I turn them to flower

Info: Unfortunately, I had to find out that my account is used for fake pages in social media. I am only active here on growdiaries. I am not on facebook instagram twitter etc All accounts except this one are fake. Have fun with the update. Flowering day 7 since time change to 12/12 h. Hey everyone ☺️. This week she has developed really well. The growth is very extreme, especially now after changing the light phase :-). During the week I will tie the stretched shoots into the net so that they can fully develop next week :-). I will also start with the flower fertilizer next week 👍. Otherwise the tent was cleaned and all containers filled 😆. Have fun with the update . Stay healthy 🙏🏻 You can buy this Strain at https://www.amsterdamgenetics.com/product/kosher-tangie-kush/ Type: Kosher Tangie Kush ☝️🏼 Genetics: Kosher Kush X Tangie 👍 Vega lamp: 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 Flower lamp : 2 x Todogrow LED CXB3590 COB 55 W 1 x Sanlight S2W 62 W 💡 ☝️ Grow Aero System : Growtool 0.8 ☝️ Fertilizer: Canna Aqua Vega A + B , Canna Aqua Flores A + B , Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal / Mag, Canna Ph - Grow, Canna Ph-Bloom ☝️🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with ph- to 5.2 - 5.8 💦 💧

It was my first grow and I really screwed it up a lot, but it resisted all my beginner mistakes, pests, stress, being without irrigation, irrigation without measuring PH, revegetation, etc. I love her, really, in love with this strain. It is a genetics with a very relaxing effect, recommended for those who cannot sleep at night. shoutout for trimix, very good prices for begginers> https://www.trimix-pro.com/

Lover her fruity smells 😍😍 Starting to develop some early trichoms 😍😍😍🤤🤤

Has been a bad week for Gorilla Cookies. After further inspection I have discovered russet mites. I treated her with neem for 4 days. I then rinsed it off yesterday. I proceeded to lollipop the plant as well. Hopefully I have killed off the mites. Thank you Spider Farmer, and Pure Instinto Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer G300w: https://amzn.to/3S2zvsd Spider Farmer 10X20 Heat Mat Kit - https://amz.fun/lsa0J Spider Farmer Amazon Store: https://www.amazon.com/spiderfarmer Spider Farmer Official Site: https://spider-farmer.com Discount code: saveurcash (stackable)

Start all seeds together super now we must wait and wait and wait on the next days better together Thank You follow me guys and YT HAPPY NEW YEAR !!?😅💚