Week 2 Day 8

Seedling popped above ground 05-05-2020. It is a bit difficult tracking temperatures and humidity since shes growing basically outside. Humidity ranges from like 20%-90% throughout the day/night. Temperatures differ every day depending on the weather as this small plastic greenhouse does not really contain any heat. The timelapse is not optimal at this moment as the camera's time was off by 2 hours and starts/stops timelapses based on sun up-down. Timelapse uploaded, more pics on their way.

Yooooo what is up guys! Welcome back - in to week ten and the zkittlez has been harvested. Cloudy trichs all over and about 10/15% amber so went with a chop today. Wet weight of 628g for the plant roughly. Including a bit of stalk weight, which I’m chuffed with. 🙌🏼 She’s on to dry now, so stay posted for post dry weights. I’ve taken off the majority of fan leaves but left all the sugar leaves for a dry trim and to help slow the drying process. The Runtz still has a few days or weeks left in her. Just waiting for those pistils to stop sprouting and some further clouding up of the trichs and then chop chopppp! Thanks for stopping by 🤟🏻

2/19 Week 8 Controlling the stretch somewhat by keeping strong blue light in the spectrum. Wont start flower under HPS again, will wait till stretch has finished. The FFt-7 seem to respond most to this, the FFt-5 not as much but still slowed down. Major day coming Saturday everyone back into one tent and that undergrowth is getting trimmed! Driving me nuts Wont need to worry so much over height at that point. Adding that small amount of PK has really spurred a lot of bud growth, looks like the guys knew what he was talking about. 2/21 Could not wait so... Lower End Defoliation Day! Cleaned them all up for their last day in Moya (veg tent) before moving to Enterprise (Flower tent) ... heh Walking nuets up 2/22 in the new digs Both the 600w HID and 150w LED are now in the tent = 750w Everybody is on the Enterprise now. 2/23 white tips back dropping back down to 4ml/gal on the CT 2/25 Cutting back PK to 2ml/gal Pics for Fast Buds on leaf oddity Raised HID a couple of clicks getting some praying leaves underneath it.

Had some issues with mildew this week so have been defoliating and spraying with water and h2o2 , added more wind . After three days this has not solved the problem , so had a friend round with his cleanlight uv-c lamp. Hopefully this will clear the problem, caused by bringing the monster Skittles inside from the back garden.

Sorry It's taken me awhile to post for this week rough week super hot but other then that she's not to mad or sad about it taking in all the sun she can plus I got her a light for those cloudy days n she's really sprung up from 6.5in to 10.5in I upd the dose in my nutrients hopefully she takes to that I added some silica to help her with the heat as well that's all for this week stay tuned next week to see how big she's gotten weather says it'll be cooler but we'll see

Still just been removing leaves blocking bud sites. The plant has had 2 waterings without any nutes due to tds reading. I put 2 cup fulls of new happy frog on top a few days ago so I'm assuming that's why the tds is staying higher for a longer period right now. Plant has some burnt tips probably from the extra nitrogen if I had to guess. Seems to be growing ok and stretching. I added 2 trellis nets to try to help support the bud.

My Ladies are really thirsty. I was not at home for four Days and give them 5 Liters per Plant. When i came home they looks like they want dying Buds was so fat now that they hang down on some Stems. So i decided to use the Scrog Net They are getting frosty but Trichomes are just clear

We only pulled about 20 grams off this one, we had to cut her down with only 7 weeks of flower, she didn't look too far from done but we needed to clear everything out and it was easier to start them drying than to transport around town.. sorry for the anticlimactic ending if you were following this grow, the stuff dried thus far is decent, about a 6 for buzz but an easy 10 for smell/taste :) ..happy growing friends

Das war die letzte Woche der GorillaAuto. An sich sehr vollgepackt mit Blüten. Leider etwas viele kleine Blätter die zwischen den Blüten gewachsen sind. Die musste man regelmäßig entfernen damit es nach Regentagen das Wasser besser wegtrocknet und man dem Schimmel etwas vorbeugt. Es waren echt viele von diesen kleinen Blättern... Hier und da waren ein paar Stellen die vom Schimmel betroffen waren. Ich denke das lässt sich outdoor nicht komplett vermeiden. Besonders nicht bei dem verregneten Sommer den wir hier dieses Jahr haben. Für die letzten Tage wurde die GorillaAuto an Regentagen reingeholt damit die buds nicht unnötig nass werden auf die letzten Tage und vielleichtnoch hier und da schimmel entsteht. Für die Zeit drinnen hat ein 5Watt Ventilator für Umluft gesorgt und eine 20W Anzuchtlampe die für etwas Tageslicht sorgt. Das Substrat wurde nur noch so minimal feucht gehalten das das Substrat nicht austrocknet.

2018.12.07 - Clone Day 68 - Flowering Day 16 I'm struggling with how to address the significant difference in height between #5 and the rest of them. I much prefer growing from seeds, where I know how to top, manifold, and LST to create an even canopy layer.

Last two weeks ive been lowering down the PPM close to 0 but right now is at 842PpM And I am going to continue lowering down thru this week til closer to zero. But for the very last week I am going to apply some extra molasses and some other techniques to see what happens... And on the other hand just make sure You Follow @cannagrowersiriuz Instagram official for more

17.3.25: I've starred a Hulkberry auto. This was the first pack of seeds I bought! I realised it was mostly sativa, but now I'm ready to give it a go! Made my soil mix, which I will update next week. Planted the seed into an RQS seed starter plug. Mainly to keep the seed in place when watering. Join my journey and hang out 🌱✌️

Los dos fenos tienes cosas en común, pero el dos es sin duda más especial, me gusta más por los terpenos y la cantidad de resina y la calidad de esta. Otra para mi coleccion de madres.

Zkittlez taking off and cream cookies not far behind.

Medium: 🥥🥥🥥🥥 Coco remains as the most manageable medium in our arsenal. It’s simplistic, similar to conventional soil but as a nutrient neutral medium, it’s also much more tailored to the growers preferences in terms of feeding. It’s best attribute is excellent drainage and consistency - a lot fluffier than soil which definitely translates to faster growth rates. It’s a damn shame that this particular grower forgot the cardinal f$&@king rule when it comes to any grow - always water to run off and pay attention to the strength of the feed in relation to the plants growth stage. If we had followed these basic principles we wouldn’t have run into the serious late stage burn that almost toasted the whole plant. On the flip side of that, coco flushes out incredibly well and if not for this attribute, the whole grow would’ve been an unmitigated disaster. Method 🎚️🎚️🎚️🎚️ Uggghhh - hindsight f$&@‘n sucks sometimes. Best descriptor for how we grew this girl - imagine having the dinner table set with your finest china, a bottle of the most expensive red wine you can find, a brand new top-o-the-line BBQ, and then burning the absolute f$&k out of a $40 prime rib. That’s exactly how this grow feels... We were looking to scrog it the whole time and this went perfectly. The plant helped quite a bit with longer than expected internodal spacing. This allowed for a really even canopy/bed of buds. Again though, the vipar 450w (truly a 200w~) shit the bed mid veg. And we needed a replacement. Went with a 100w SpiderFarmer QB. While I truly am pleased with the purchase I do believe that we should’ve upp’d to the 200w model (or 2, 100w models) to achieve a similar output and result - @silverback_guerilla was right on point with the lighting advice (*again). Given the reduced yield it just feels like the nodal spacing and overall bud quality may have suffered with the reduced power. This, despite the better light spectrum and overall coverage in general. As an aside - an additional Fixture is now on the way😉👍. Worst part about this is we’ll never really know what the true limiting factor actually was due to the nute burning. Probably the single most stupid, rook mistake I could’ve made was not watering to runoff.... just too much shit going down in the world (and in life) these days and I started to treat the grow like it was on auto pilot🤬🤬🤬. The whole worlds a cluster f$&k right now so why should the grow be any different right? 4/5 for the method, losing1 point because the grower is a lazy moron. Yield/Harvest🌴 The final numbers are better than expected, 2.26oz of usable bud. Not overly fluffy and not overly dense. Not glazed in frost but not without a little shimmer. All around mediocre unfortunately. What it coulda? Shoulda? Woulda been??? Note sure 🤔 but we’ll take it👍. On a more positive note - There was still another new addition to our grow cycle. This time on the back end. Everyone knows that trimming just plain sucks. When we’re spitt’n out 3-4 plants every few months, the exercise is a dreaded necessity if were gonna maintain the vast array of choice that we’re used to🤙👌. The whole process just for one plant can take hours unless you have help. We prefer to wet trim too so for those that don’t require a commercial size trimmer, the only option to save some time is a trim bowl. We bit the bullet, dropped the cash on one - have NOT been disappointed at all! Not only did it cut the chop process from 2-3 hours down to a mere 45 minutes, the buds literally came out rack ready. There was no need to do any touch up trimming and the bud photos you see are as-is, right out the bowl🤩. Really coulda used this last fall and I would recommend this to anyone who chops more than a handful of plants per year. Just awesome and worth every penny!👌🤙👍 At times like these, we should all just be thankful that we still have both the opportunity and ability to grow our own✌️. Best be to all of you and stay safe out there.👊 Background For those not in the know, SSSC has been around for 40 years. Out of Amsterdam, they are the 2nd such breeder to market their genetics worldwide and can lay claim to the origins of their beans better than most (if not all) others. They’ve produced here an indica hybrid cross of M33/Friesland Indica with an elite clone of Lava Cake. We’re hoping to encounter one of the purple phenos but only time will tell. She’s supposed to be super strong too and not for the faint of heart 👍. We’ve been wait’n on this one awhile and she’ll be getting individual treatment in the small cab - 5gal. Coco w/perlite and the typical nute regimen. Advance props for the best packaging I’ve ever seen (although you may need to be an 80’s baby or older to truly appreciate it😉). See week 1 photos.