Likes
Comments
Share
Almost all the Nam wah clones pulled now Ran the trim for bubble and pressed it, I gotta stop leaving stuff in the freezer I suspect it kills the terps.
Likes
4
Share
She has hit week 5 and I have to say she is looking healthy and green, the growth has been so rapid considering she had a rough start in that propgation box. My earlier concerns regarding a stump in growth has started to disappear as she now sits at 8 inches tall and now leaves are start to grow in the middle. Very happy with the current outcome ☺️
Likes
20
Share
@Chubbs
Follow
420FASTBUDS FBT2104 WEEK 3 These beauties seem to be on the fasttrack to greatness. So far they have shown absolutely zero signs of issues and no signs of nute burn. I'm starting to brew a molasses tea to give them a nice feeding in a couple days after the teas aerated with a little frothy on top. The temps & humidity I dropped into the mid 70's and 30% and the plants seem to enjoy those ranges. Happy Growing
Likes
28
Share
@Fatnastyz
Follow
2-17 Pre flower is over. 2 liters ph 6.2 Silica, cal/mag and drops of balance. Growing well. 2-21 Top dress 2 tbs Buildaflower 1/8 cup poo. Cal/mag, drops of balance, recharge 2 liters
Likes
563
Share
@Ju_Bps
Follow
Hello my friends 👩‍🌾👨‍🌾, This 8th flowering week was good 👊, maturation Buds continue 🌲❄️, I thought it will be the last week, but need one more. The end is for this week end I think, for moment trichromes not really full milky, and I like something like 20% amber. I've started flush with flash cleaner The senesence is started on the #3. 💦 1 Watering this week 1.8l/plant . Water + flash cleaner PH@6 Lamp @100% Bisous 💋😘, and see you next week. Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - TS 1000 https://www.mars-hydro.com/ts-1000-led-grow-light Mars Hydro - FC3000 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - SP3000 https://www.mars-hydro.com/sp-3000-samsung-lm301b-greenhouse-led-grow-light The High Chameleon - Bisous Au THC 💋💋🌲🌲😘😘 https://www.thehighchameleon.com/shop/bisous-au-thc-83
Likes
3
Share
Smooth trim, last of the first wave of autos this summer - yields are very low but the bud looks great :)
Likes
1
Share
@TTerpz
Follow
Responding well to the top Fed with lotus: 4/12/26
Likes
25
Share
ANTHOCYANIN production is primarily controlled by the Cryptochrome (CR1) Photoreceptor ( !! UV and Blue Spectrums are primary drivers in the production of the pigment that replaces chlorophyll, isn't that awesome! 1. Diverse photoreceptors in plants Many civilizations, including the sun god of ancient Egypt, thought that the blessings of sunlight were the source of life. In fact, the survival of all life, including humans, is supported by the photosynthesis of plants that capture solar energy. Plants that perform photosynthesis have no means of transportation except for some algae. Therefore, it is necessary to monitor various changes in the external environment and respond appropriately to the place to survive. Among various environmental information, light is especially important information for plants that perform photosynthesis. In the process of evolution, plants acquired phytochrome, which mainly receives light in the red light region, and multiple blue light receptors, including his hytropin and phototropin, in order to sense the light environment. .. In addition to these, an ultraviolet light receptor named UVR8 was recently discovered. The latest image of the molecular structure and function of these various plant photoreceptors (Fig. 1), focusing on phytochrome and phototropin. Figure 1 Ultraviolet-visible absorption spectra of phytochrome, cryptochrome, phototropin, and UVR8. The dashed line represents each bioactive absorption spectrum. 2. Phytochrome; red-far red photoreversible molecular switch What is phytochrome? Phytochrome is a photochromic photoreceptor, and has two absorption types, a red light absorption type Pr (absorption maximum wavelength of about 665 nm) and a far-red light absorption type Pfr (730 nm). Reversible light conversion between the two by red light and far-red light, respectively(Fig. 1A, solid line and broken line). In general, Pfr is the active form that causes a physiological response. With some exceptions, phytochrome can be said to function as a photoreversible molecular switch. The background of the discovery is as follows. There are some types of plants that require light for germination (light seed germination). From that study, it was found that germination was induced by red light, the effect was inhibited by subsequent far-red light irradiation, and this could be repeated, and the existence of photoreceptors that reversibly photoconvert was predicted. In 1959, its existence was confirmed by the absorption spectrum measurement of the yellow sprout tissue, and it was named phytochrome. Why does the plant have a sensor to distinguish between such red light and far-red light? There is no big difference between the red and far-red light regions in the open-field spectrum of sunlight, but the proportion of red light is greatly reduced due to the absorption of chloroplasts in the shade of plants. Similar changes in light quality occur in the evening sunlight. Plants perceive this difference in light quality as the ratio of Pr and Pfr, recognize the light environment, and respond to it. Subsequent studies have revealed that it is responsible for various photomorphogenic reactions such as photoperiodic flowering induction, shade repellent, and deyellowing (greening). Furthermore, with the introduction of the model plant Arabidopsis thaliana (At) and the development of molecular biological analysis methods, research has progressed dramatically, and his five types of phytochromes (phyA-E) are present in Arabidopsis thaliana. all right. With the progress of the genome project, Fi’s tochrome-like photoreceptors were found in cyanobacteria, a photosynthetic prokaryotes other than plants. Furthermore, in non-photosynthetic bacteria, a homologue molecule called bacteriophytochrome photoreceptor (BphP) was found in Pseudomonas aeruginosa (Pa) and radiation-resistant bacteria (Deinococcus radiodurans, Dr). Domain structure of phytochrome molecule Phytochrome molecule can be roughly divided into N-terminal side and C-terminal side region. PAS (Per / Arndt / Sim: blue), GAF (cGMP phosphodiesterase / adenylyl cyclase / FhlA: green), PHY (phyto-chrome: purple) 3 in the N-terminal region of plant phytochrome (Fig. 2A) There are two domains and an N-terminal extension region (NTE: dark blue), and phytochromobilin (PΦB), which is one of the ring-opening tetrapyrroles, is thioether-bonded to the system stored in GAF as a chromophore. ing. PAS is a domain involved in the interaction between signal transduction-related proteins, and PHY is a phytochrome-specific domain. There are two PASs and her histidine kinase-related (HKR) domain (red) in the C-terminal region, but the histidine essential for kinase activity is not conserved. 3. Phototropin; photosynthetic efficiency optimized blue light receptor What is phototropin? Charles Darwin, who is famous for his theory of evolution, wrote in his book “The power of move-ment in plants” published in 1882 that plants bend toward blue light. Approximately 100 years later, the protein nph1 (nonphoto-tropic hypocotyl 1) encoded by one of the causative genes of Arabidopsis mutants causing phototropic abnormalities was identified as a blue photoreceptor. Later, another isotype npl1 was found and renamed phototropin 1 (phot1) and 2 (phot2), respectively. In addition to phototropism, phototropin is damaged by chloroplast photolocalization (chloroplasts move through the epidermal cells of the leaves and gather on the cell surface under appropriate light intensity for photosynthesis. As a photoreceptor for reactions such as escaping to the side of cells under dangerous strong light) and stomata (reactions that open stomata to optimize the uptake of carbon dioxide, which is the rate-determining process of photosynthetic reactions). It became clear that it worked. In this way, phototropin can be said to be a blue light receptor responsible for optimizing photosynthetic efficiency. Domain structure and LOV photoreaction of phototropin molecule Phototropin molecule has two photoreceptive domains (LOV1 and LOV2) called LOV (Light-Oxygen-Voltage sensing) on the N-terminal side, and serine / on the C-terminal side. It is a protein kinase that forms threonine kinase (STK) (Fig. 4Aa) and whose activity is regulated by light. LOV is one molecule as a chromophore, he binds FMN (flavin mononucleotide) non-covalently. The LOV forms an α/βfold, and the FMN is located on a β-sheet consisting of five antiparallel β-strands (Fig. 4B). The FMN in the ground state LOV shows the absorption spectrum of a typical oxidized flavin protein with a triplet oscillation structure and an absorption maximum wavelength of 450 nm, and is called D450 (Fig. 1C and Fig. 4E). After being excited to the singlet excited state by blue light, the FMN shifts to the triplet excited state (L660t *) due to intersystem crossing, and then the C4 (Fig. 4C) of the isoaroxazine ring of the FMN is conserved in the vicinity. It forms a transient accretionary prism with the tain (red part in Fig. 4B Eα) (S390I). When this cysteine is replaced with alanine (C / A substitution), the addition reaction does not occur. The effect of adduct formation propagates to the protein moiety, causing kinase activation (S390II). After that, the formed cysteine-flavin adduct spontaneously dissociates and returns to the original D450 (Fig. 4E, dark regression reaction). Phototropin kinase activity control mechanism by LOV2 Why does phototropin have two LOVs? Atphot1 was found as a protein that is rapidly autophosphorylated when irradiated with blue light. The effect of the above C / A substitution on this self-phosphorylation reaction and phototropism was investigated, and LOV2 is the main photomolecular switch in both self-phosphorylation and phototropism. It turns out that it functions as. After that, from experiments using artificial substrates, STK has a constitutive activity, LOV2 functions as an inhibitory domain of this activity, and the inhibition is eliminated by photoreaction, while LOV1 is kinase light. It was shown to modify the photosensitivity of the activation reaction. In addition to this, LOV1 was found to act as a dimerization site from the crystal structure and his SAXS. What kind of molecular mechanism does LOV2 use to photoregulate kinase activity? The following two modules play important roles in this intramolecular signal transduction. Figure 4 (A) Domain structure of LOV photoreceptors. a: Phototropin b: Neochrome c: FKF1 family protein d: Aureochrome (B) Crystal structure of auto barley phot1 LOV2. (C) Structure of FMN isoaroxazine ring. (D) Schematic diagram of the functional domain and module of Arabidopsis thaliana phot1. L, A’α, and Jα represent linker, A’α helix, and Jα helix, respectively. (E) LOV photoreaction. (F) Molecular structure model (mesh) of the LOV2-STK sample (black line) containing A’α of phot2 obtained based on SAXS under dark (top) and under bright (bottom). The yellow, red, and green space-filled models represent the crystal structures of LOV2-Jα, protein kinase A N-lobe, and C-robe, respectively, and black represents FMN. See the text for details. 1) Jα. LOV2 C of oat phot1-to α immediately after the terminus Rix (Jα) is present (Fig. 4D), which interacts with the β-sheet (Fig. 4B) that forms the FMN-bound scaffold of LOV2 in the dark, but unfolds and dissociates from the β-sheet with photoreaction. It was shown by NMR that it does. According to the crystal structure of LOV2-Jα, this Jα is located on the back surface of the β sheet and mainly has a hydrophobic interaction. The formation of S390II causes twisting of the isoaroxazine ring and protonation of N5 (Fig. 4C). As a result, the glutamine side chain present on his Iβ strand (Fig. 4B) in the β-sheet rotates to form a hydrogen bond with this protonated N5. Jα interacts with this his Iβ strand, and these changes are thought to cause the unfold-ing of Jα and dissociation from the β-sheet described above. Experiments such as amino acid substitution of Iβ strands revealed that kinases exhibit constitutive activity when this interaction is eliminated, and that Jα plays an important role in photoactivation of kinases. 2) A’α / Aβ gap. Recently, several results have been reported showing the involvement of amino acids near the A’α helix (Fig. 4D) located upstream of the N-terminal of LOV2 in kinase photoactivation. Therefore, he investigated the role of this A’α and its neighboring amino acids in kinase photoactivation, photoreaction, and Jα structural change for Atphot1. The LOV2-STK polypeptide (Fig. 4D, underlined in black) was used as a photocontrollable kinase for kinase activity analysis. As a result, it was found that the photoactivation of the kinase was abolished when amino acid substitution was introduced into the A’α / Aβ gap between A’α and Aβ of the LOV2 core. Interestingly, he had no effect on the structural changes in Jα examined on the peptide map due to the photoreaction of LOV2 or trypsin degradation. Therefore, the A’α / Aβ gap is considered to play an important role in intramolecular signal transduction after Jα. Structural changes detected by SAXS Structural changes of Jα have been detected by various biophysical methods other than NMR, but structural information on samples including up to STK is reported only by his results to his SAXS. Not. The SAXS measurement of the Atphot2 LOV2-STK polypeptide showed that the radius of inertia increased from 32.4 Å to 34.8 Å, and the molecular model (Fig. 4F) obtained by the ab initio modeling software GASBOR is that of LOV2 and STK. It was shown that the N lobes and C lobes lined up in tandem, and the relative position of LOV2 with respect to STK shifted by about 13 Å under light irradiation. The difference in the molecular model between the two is considered to reflect the structural changes that occur in the Jα and A’α / Aβ gaps mentioned above. Two phototropins with different photosensitivity In the phototropic reaction of Arabidopsis Arabidopsis, Arabidopsis responds to a very wide range of light intensities from 10–4 to 102 μmol photon / sec / m2. At that time, phot1 functions as an optical sensor in a wide range from low light to strong light, while phot2 reacts with light stronger than 1 μmol photon / sec / m2. What is the origin of these differences? As is well known, animal photoreceptors have a high photosensitivity due to the abundance of rhodopsin and the presence of biochemical amplification mechanisms. The exact abundance of phot1 and phot2 in vivo is unknown, but interesting results have been obtained in terms of amplification. The light intensity dependence of the photoactivation of the LOV2-STK polypeptide used in the above kinase analysis was investigated. It was found that phot1 was about 10 times more photosensitive than phot2. On the other hand, when the photochemical reactions of both were examined, it was found that the rate of the dark return reaction of phot1 was about 10 times slower than that of phot2. This result indicates that the longer the lifetime of S390II, which is in the kinase-activated state, the higher the photosensitivity of kinase activation. This correlation was further confirmed by extending the lifespan of her S390II with amino acid substitutions. This alone cannot explain the widespread differences in photosensitivity between phot1 and phot2, but it may explain some of them. Furthermore, it is necessary to investigate in detail protein modifications such as phosphorylation and the effects of phot interacting factors on photosensitivity. Other LOV photoreceptors Among fern plants and green algae, phytochrome ɾphotosensory module (PSM) on the N-terminal side and chimera photoreceptor with full-length phototropin on the C-terminal side, neochrome (Fig. There are types with 4Ab). It has been reported that some neochromes play a role in chloroplast photolocalization as a red light receiver. It is considered that fern plants have such a chimera photoreceptor in order to survive in a habitat such as undergrowth in a jungle where only red light reaches. In addition to this, plants have only one LOV domain, and three proteins involved in the degradation of photomorphogenesis-related proteins, FKF1 (Flavin-binding, Kelch repeat, F-box 1, ZTL (ZEITLUPE)), LKP2 ( There are LOV Kelch Protein2) (Fig. 4Ac) and aureochrome (Fig. 4Ad), which has a bZip domain on the N-terminal side of LOV and functions as a gene transcription factor. 4. Cryptochrome and UVR8 Cryptochrome is one of the blue photoreceptors and forms a superfamily with the DNA photoreceptor photolyase. It has FAD (flavin adenine dinucle-otide) as a chromophore and tetrahydrofolic acid, which is a condensing pigment. The ground state of FAD is considered to be the oxidized type, and the radical type (broken line in Fig. 1B) generated by blue light irradiation is considered to be the signaling state. The radical type also absorbs in the green to orange light region, and may widen the wavelength region of the plant morphogenesis reaction spectrum. Cryptochrome uses blue light to control physiological functions similar to phytochrome. It was identified as a photoreceptor from one of the causative genes of UVR8 Arabidopsis thaliana, and the chromophore is absorbed in the UVB region by a Trp triad consisting of three tryptophans (Fig. 1D). It is involved in the biosynthesis of flavonoids and anthocyanins that function as UV scavengers in plants. Conclusion It is thought that plants have acquired various photoreceptors necessary for their survival during a long evolutionary process. The photoreceptors that cover the existing far-red light to UVB mentioned here are considered to be some of them. More and more diverse photoreceptor genes are conserved in cyanobacteria and marine plankton. By examining these, it is thought that the understanding of plant photoreceptors will be further deepened.
Likes
1
Share
She's looking very healthy on her first 2 weeks let's see how she develops,her leafs smell super good she's gonna be a great strain I can feel it,can't wait to see this lady in full flower
Processing
Likes
5
Share
Week #4 of bloom , girls are all looking good , going to remove some of the shade leaf this week to open up the canopy and get some more light to the smaller bud sites , I dialed my feed schedule back to 3 times per 24 hrs , I haven’t seen any negative reactions to the adjusted feeding and it’s been a week since I made the changes ,
Likes
30
Share
@Kirsten
Follow
Bubble Kush is progressing very slowly. I have noticed that the plant produced 2, 5 finger leaves, but the next set were only 3 fingers, now 5 finger leaves again. I find this to be peculiar. As this is my last seed, I really don't want to mess this one up. 9.8.25: I watered with 1L of dechlorinated water PH'd to 6.5 with; 💜 1ml Trace PH: 6.5 PPM: 381 12.8.25: I watered with 100ml of dechlorinated water PH'd to 6.2 with; 💜 1ml Trace PH: 6.2 PPM: 349 13.8.25: I watered with 500mls of dechlorinated water PH'd to 6.6 with; 💜 1ml Trace 💜 1 TSP Biosys PH: 6.6 PPM: 351 17.8.25: I watered with 2ltrs of dechlorinated water PH'd to 6.0 with; 💜 2ml Trace PH: 6.0 PPM: 391 Thanks for checking in this week and hanging out in the comments 😊💚✌️🍃🙏
Likes
17
Share
@kizdog
Follow
Honestly not much to say about the dry and trim, which is definitely a good thing. 12 days hanging in the tent, and the plants were ready to trim. me & the Mrs. absolutely sailed through it. Stores like a dream, and smokes the same. Not a crazy amount of flavour, but the aroma that it has is lime and cream. And the taste is more earthy and spicy. Loving and savouring every bit of it. Sorry I’m very late with this, but I’ve been busy getting my next plants started! You should see them come up soon, as I’m quite behind in my posting. I’m very happy! 🤟💚
Likes
6
Share
@CalGonJim
Follow
1/19 1am MONDAY...TOO STONED TO TYPE..WHAT THE HELL IS THIS THEN..HEY SHUT UP....WAIT...IS THAT ME?😂 1/19 5 AM.🚨 I GOT THE HOLY TRIANGLE OF WEED THE WHOLE FUUCK'N TRAILER PARK IS HERE!!!!! Finally got black tea Tangie in the ground so Julian bubbles and Ricky are all growing with Montel and ice t. 1/20 1:20PM VEGING PERFECT AT 30 WATTS!!! 1/21 10:11 AM. The whole fucking park is here. Julian sprouted!!! Bubbles and Ricky are doing great. I’m gonna top them and then I’m gonna start them over from clones so they grow roughly the same time as Julian and I’ll keep the Ricky and the bubbles others as mother plants and I’ll just keep them going. 1/21 10:15 AM vegging 12 inches 30 W Samsung LED Mars Hydro light perfect 121 1:10 PM I moved black tea Tangie into the germination station. The 2 gallon fits in here just fine. This will be fine for germination.. She’s sprouted only after about 40 hours so she’s really strong. 1/21, 2:54 PM. I made a my own Star Wars movie. Special effects are incredible. It’s very removing made my own Obi-Wan.A CalGonJim Production 🎥🍿
Likes
150
Share
Week 4: Continued Growth and Training Hello dear Weed friends, welcome to my fourth weekly report on my exciting grow with four different strains: Lemon Gelato, Orange Sherbert, Apple Fritter and Bruce Banner. This week I learned a lot and continued to care for and promote my plants. I took the following steps: I applied LST (Low Stress Training) to all plants to improve their shape and let more light reach the lower branches. I topped the Apple Fritter several times, as it grows the fastest . I hope that this will result in many thick buds. I topped the other three strains only on the main stem to allow them more side branches. The plants look good, even though I sometimes doubt whether I am doing everything right. But I am confident that they will be even stronger and more beautiful in 1-2 weeks. My next goal is to repot the plants in larger pots in 2 weeks and attach a net in the tent. This should help me distribute the plants evenly and use the space optimally. I also want to avoid having such a mess in the tent as last time. That made harvesting very difficult. Another highlight this week was buying a new lamp: the Lumatek 300 Watt Pro Edition. This lamp is simply fantastic! It has a great illumination, a high efficiency and a cool look. It looks like a UFO! I am very happy with this investment and gave my old lamp to my brother. So it stays in the family. I water my plants as needed with 1 liter of water each, to which I add 100 percent of the recommended fertilizer schedule. I use all options of the fertilizer, which you can read in the fertilizer directory. I would also like to show you my timelapse video that I have been making since the first week. The video shows you how my plants have changed from week to week. It is really impressive to see how they have grown. I will update the video every four weeks and show you the latest video. I hope you enjoyed my report and are looking forward to the next weeks. See you soon!
Likes
6
Share
@FijiS
Follow
Week7 D1 I think things have stabilized and we are back on track. Since I flushed and wont be able to utilize top amendments like I would like I am going to use TSP One Bloom Boost Liquid Nutrient for the remaining 2 weeks. Week7 D5 Blue dream is fading hopefully she is drawing in energy and going to swell soon. All girls are super frosty and sticky and dense. W7 D6 Seems early but blue dream is maturing quick and sin mins is beginning to fade. We are now in harvest watch!!!
Likes
33
Share
Day 69 for the blueberry, after her supercrop she's been topped all over to make lower growth become more dominant (more tops) she's coming along into a lovely bush shape 😍 nothing to report, we've had a 5 week draught with temps of 25-30°c so all my girls have been loving it 😁 happy & healthy so far, so good!
Likes
7
Share
Grew great. Got all males. Will try these seeds again next year.
Likes
133
Share
5x5 Grow Ac Infinity Self-Watering Base Grow & Geakbeast Pro Seedsmans & Barneys Farm Veg to Flower Episode 1 Join our discord for free giveaways! 🎉 🔥 🎁 https://discord.gg/VMu6rH4a7V Video available here 📹 https://www.youtube.com/watch?v=46gvz1lCoSg Ac Infinity Grow 5x5 Firstly like to apologise the length its taken to edit the video and get it uploaded and the quality scaling is way off. I've had few issue's with the new camera i'm using. Video is to demonstrate my growing technique and utilising the Ac infinity equipment & results using the famous Geakbeast Pro. Unfortunately there isn't any audio, on the next couple videos ill be commentating along and explaining all named brands i personally use and i recommend below i have given explanation... Episode 2 will have a new line of genetics. Solfire Gardens Square Genetics Exotic Genetics Humboldt Grow Diaries Dutchfarmer 🎉 🔥 🎁 Discord Community 🎉 🔥 🎁 (Friendly Community & Free Help & Support) https://discord.gg/VMu6rH4a7V Growing Equipment and supplies Geakbeast Pro ACINFINITY T series Inline Fans ACINFINITY CLOUDRAY S6, Clip Fan 6 ACINFINITY Tent 5x5 ACINFINITY Carbon Filter 4 Inch ACINFINITY 5Gal Pots ACINFINITY Self Watering Pots ACINFINITY Scrog Trellis Net Nutrients Canna Coco Full Range including Boost Medium Coco Perlite Strains Amnesia Fast Flowering Barneys Liberty Haze Barneys G13 Haze PH Pen Aperha PC60
Likes
9
Share
@Colo420
Follow
Atrasados con el seguimiento debido a las vacaciones pero aquí regresamos!! Proximamente 6 comienzan su flora en exterior y 2 en interior