Recommended
Likes
Comments
Share
@OGgrows
Follow
what a great phenotype. Very easy to grow. bittersweet citrus flavor. very nice and fresh. great strain
Likes
1
Share
Likes
14
Share
@Swanberg
Follow
Due to problems with autoflower genetics and refusing to flower. I am pleased with final result. I knew my yield would take a hit by using 3 gallon pots. Just was not planning for these plants to take damn 100 days. Roots were coming thru bottom of bags. Not good. But happy results and beautiful purple nugs. See what the cure does. Edit/ update: with few days of curing smell and taste have dramatically improved. There is basically no woody taste or smell, just grapey and sour with a hint of spicy. I change my strain score to 9/10. Due to not being able to update after 1 hr of original post. The only reason I give a 9 is because of Flowering problem. Update: week of curing smooth as butter and fruity and flowery flavor mellow draw with a little kick no harshness at all. Pleseant take.
Likes
66
Share
🍼 Greenhouse BIO Feeding Line which are ORGANIC For LIQUIDS ******GREEN BUZZ LIQUIDS***** also ORGANIC MARSHYDRO ⛺️ has large openings on the sides which is useful for mid section groom room work. 🤩 ☀️ MARSHYDRO FC 3000 LED 300W ☀️Also special thanks to VIPERSPECTRA P2000 (200W) & XS2000(240w) LED growlights
Likes
2
Share
Great week 4 for my 2 lovely Papaya Sherbet
Likes
10
Share
@40Plug
Follow
Wow! Look at these amazing two plants. They both turned a bit purple. The smell is insane. Belive me or not but my entire room smells like a sweet ice cream restaurant. 😍 I had given this week only PH adjusted water and darkness for two days before harvest. Going to dry for like 7-10 days and then curing for another month or so. I will upload more pictures of the dried buds when the time comes
Likes
2
Share
@EyeMKing
Follow
Started the first top dressing of Gaia Green All Purpose and Power Bloom at a 50/50 ratio of 1tbsp/gal each.
Likes
23
Share
@DreamIT
Follow
Sponsored by: ⚖️HUMBOLDT SEESDS⚖️-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 28/7 cut made and clone fixed. Monday entry into bloom. super yeah 2/8 this beauty was cut to make a clone, but I will pick two more before sending it into bloom __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Highly professional graphics and website, one-of-a-kind genetics, and a legendary story! Anonymous shipping! ✅https: //bit.ly/HumboldtSeedsCompany __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreami t" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟
Likes
2
Share
FW 4. I made a light defoliation. Now I have some problems with the space😅
Likes
109
Share
gorilla glue is a classic, it has a really sticky and strong texture. easy to grow stress resistant
Likes
58
Share
🗓️Day 107 🗓️Day 67 Flower 16/08/24 Saturday The time is NOW 😋😁👏🎉💚
Processing
Likes
6
Share
in veg to allow humidity to be high I had plants on risers and left water in the bottom tray of tent after feeding. I cleaned the tent and reintroduced drip trays under pot risers and now I shop-vacuum all water out of drip tray to keep rh lower for flower. also increased exhaust from low to high and added a 4 inch booster fan to bottom of tent as intake to draw dry air in. sour 76 #5 (fastest largest grower) was male got pulled out of tent but later eaten by my cats :( rip didnt get any pollen collected
Likes
47
Share
Hello and thank you for stopping by, this is the start of week 4 of flower for this Sour Diesel Auto from Fast Buds. Everything seems to be going just fine still waiting on my beneficial nematodes to come in the mail so we can take care of the gnat larvae issue that I have going on. I am planning on getting some yellow sticky pads as well. This Sour Diesel Auto is starting to pack on some frost and some gassy smells. I am top dressing with 484 and worm castings every 7 to 10 days and watering with a pH of 6.5 of dechlorinated tap water. Nothing much else to say as everything is going smoothly with little to no effort thanks to my organic style of growing. Stay tuned for some more gassy frost next week! ✌️
Likes
22
Share
@Prilyfe13
Follow
April 20, 2024 Happy 420 Everyone! A new diary for a new contest by Seedsman! Sit back, because there's a lot to talk about today. Just like all of my grows, this run will have daily updates with pictures, a weekly video and as much detail as I can muster in the stats. Let's get started. First off, let's talk about the setup. I have 4 plants in my main tent that won't be done for a couple more weeks. So these ladies will be starting out in an AC Infinity Germination Center with their Germination grow lights, a heat mat and a small computer fan to keep the air fresh. The DLI will be around 12 mol/m²/d. They will be planted in root Riot Plugs until they show roots. Then in their final 3 gallon fabric containers. Then into the Mars Hydro 2x2 tent with the TS600 light. 100 watts of pure power. Haha. This should only be for a couple weeks. Just enough time for them to be well established. Then they will go into my AC Infinity 3x3 tent with the S33 grow light. 240 watts of power. I have 2 oscillating clip fans running a slight breeze at all times. I'm using a 4" exhaust fan with filter. I'll be using the AC Infinity bottom feed wick system. I've been using it for quite a while and I find it to extremely efficient. More about this later on in the grow. Let's talk about the strain. Sour Diesel Auto by Seedsman. This strain should be with us for the next 8 to 10 weeks. In my experience, add another week or two just Incase. We can expect a really good yield if I don't screw anything up. Up to 650/m². She has some environmental requirements. Heat is the main thing. Slightly humid for the veg stage and dry for the flowering stage. Being a sativa dominant strain, she will grow tall. I'll be implementing LST and light defoliation for this plant without a doubt. That's about it for now. I'll describe characteristics throughout the run. Finally to our actual ladies. I'm germinating 5 in a glass of water. I plan on keeping 4 total. That's all my tent can fit. So I'll do away with the 5th and work with the 4 best seedlings. They should sink overnight and start to open up. As soon as I see the tap roots, they go in the Root Riot Plugs. That's all for today. See you tomorrow. Oh, and thanks for reading. Wish me luck on this journey. It is a grow off after all. Lol April 21, 2024 4 of the 5 seeds have sunk to the bottom of the cup with my assistance. The 5th one I still floating. However, I don't see any tap roots, so another day or 2. I may pop the sunken seeds in the Root Riot Plugs tomorrow afternoon. The 5th seed may be the reject. If it doesn't pop in a couple days, I'm calling it a loss and working with the 4 other seeds as I originally planned. I could also go down to 3 plants, but I frankly would like the even number of 4. 1 per quadrant. We shall see. I wonder if I should do three 5 gallon plants or four 3 gallon plants. We shall see. The biggest obstacle will be the tight space I have to work with for the next 2 to 3 weeks while the plants already in there are done. I plan on dry trimming for a faster dry. Normally, I like to hang the whole plant. This time around will be wet trimmed and hung in parts. OR placed in my bud drying rack. That's large enough to hold all 4 plants' buds. I should also mention that these seeds are in constant darkness until they go into the plugs. Kind of obvious, but these diaries are not only for my records but set up as an educational piece of work. The environment is looking fine. The air temp is 82°, but the water is definitely no where near that warm. I did have to drop the exhaust fan down and increase the heat mat temp to get the water temp up to a proper temp. Germination Center Environment: I'll be keeping the temp around 82° and the humidity doesn't matter for now. When it matters, I fill the bottom of the Germination Center with water. It helps perfectly with the humidity for growing seedlings. It will also help regulate the temp to around 78° to 79°. April 22, 2024 All 5 ladies have sunk to the bottom of the cup. Now it's just a matter of time for the taproots come out. Somehow, the Germination Center was cold this morning. Like 68° cold. So I took the riser off the dome and cranked the heat mat to bring the heat and humidity up. That being said, the seed water is much cooler than I want. I like warm water for germination. Oh well. The heat mat should fix things in a matter of hours. Everything else looks good. Germination Center Environment: Currently it's at 77° and 94% humidity. It should level out to about 80° and the humidity should stay about the same. I also took the fan off the dome. I'll put it back on when they pop out of their plugs. April 23, 2024 All 5 seeds popped. They all have tiny taproots just starting to form. This is when I plant them in the plugs. They should take a couple days to break surface, but definitely germinated. Now it's just a matter of choosing the 4 best looking seedlings. They are now in the Root Riot Plugs with the temp at 77° and humidity at 95%. The dome is on without the extension for now. Once they show leaves, I'll install the extension and turn the light on. I'll be leaving the light on for 24 hrs. While in the Germination Center. Once out and established, I'll change it to the normal 18/6 light schedule. I was considering starting at 18/6 from the beginning, but I've tried that and feel like it wasn't as successful as 24 hours. Especially because these are autos. The kickstart of light makes total sense. We will see if my theory is correct. Germination Center Environment: Temp: 77.4° RH: 95.4% VPD: 0.15 kPa April 24, 2024 Nobody hopped surface yet today. I don't even see green in the plugs yet. I'm definitely not worried about it. I expect them to break surface in a couple of days. Maybe tomorrow or the day after. Honestly, I won't mind if they take a little bit longer and I can keep them in the Germination Center for a bit longer. It will work out best for my whole grow operation. Small as it is. I gave each seed plug a bit of filtered water today. Just to keep the moisture up. It shouldn't matter too much. The plugs are pre-moistened, so there shouldn't be any issues there. I'll be turning the lights on when I start to see green. They will be on 24 hours for the first week. Then into the main light at 18/6 for the rest of the grow. The environment is a bit bouncy while I work to get the system right. The heat mat is perfect a it's setting, but the fan needs to be messed with and the dome port needs to be adjusted as well. So far it's not too bad, but the temp keeps dropping below 75°. I'll keep a closer eye on it while I get it to acclimate to the proper total environment. Germination Center Environment: Temp: 80.4° RH: 94.7% VPD: 0.19 kPa April 25, 2024 Some ladies are starting to show green! Today we have 3 of the 5 ladies breaking surface with the shells. One of them is absolutely going to have helmet head. Or whatever it's called. I'll be needing to fix that. I'll wait til tomorrow to see how things go. The other 2 are still working their plugs. That being said, I reinstalled the dome extension and turned the lights on to 20% power. The DLI is around 10 mol/m²/d. I'll increase the light power in a day or 2 when the rest of the babies pop up. We should end up with the DLI of 12 mol/m²/d when we start seeing leaves. The environment hasn't been the best. Not my best start by far. I can't keep the temp at a good range. My night time temps are super low and then I get a decent day temp, but then it gets too hot. I'm going to have to figure out the heat mat I think. It's back to normal now, but was like 65° last night. Not good. With the light on now, the temp shouldn't be a problem. Germination Center Environment: Temp: 72.6° (too low) RH: 76.8% VPD: 0.64 kPa April 26, 2024 So far I have 4 ladies fully showing with the 5th lacking any movement. She mush not have actually popped. Or maybe a little late. I'll give it 2 more days and see what happens. Anyway, I think I already have my 4 plants now. They will be labeled A through D. Everything looks great for now. The environment is looking great at 80° and a humidity of 82%. I won't need to mist them at all at this rate. Maybe when they get into the nursery bags I'll need to mist. We shall see. I'll be leaving the light at 20% for another day or two. Then I'll increase the intensity to 12 mol/m²/d. It should start this run out swimmingly. One of the babies had a helmet, so I gently removed that this morning. Other than that, nothing else for the day. Germination Center Environment: Temp: 78.7° RH: 80.0% VPD: 0.69 kPa April 27, 2024 This is when I normally would start a new week, but these ladies are only in the very early seedling stage. Not on veg. Honestly, I would love for a seedling stage week. Now I'm kind of stuck until I see the first set of true leaves. Another few days no doubt. So it throws off my schedule. Oh well. I'll do my best to keep track. I have 1 seed that rooted, but never grew up. I'm calling it a loss for now. So 4 of 5 seeds made it out of the plugs. I also have a 4th one that is super wonky. I'll keep it for now. If it looks all messed up over the next few days, I'll have to toss that one as well and just work with 3 plants. Hopefully it won't come to that. The 3 seedlings that are looking good, look really good. Roots already starting to get exposed. They will be going in the 1/5 gallon nursery bags in a matter of days. Maybe even tomorrow. I don't like too much root to show before transplanting. So that may be a thing tomorrow. I'll increase the light intensity when they are transplanted. It makes the most sense based on the speed they grow. The environment is pretty good. Hovering at a temp of 80° and 87.4% humidity. I also gave them a small misting to keep the humidity up and the babies getting all the water they can get without overdoing it. Germination Center Environment: Temp: 81.2° RH: 88.9% VPD: 0.41 kPa
Likes
93
Share
@Ferenc
Follow
Alright. 5th week just started. FIMming is done on the Purple Punch with Today, it looks so good and big. I think it is growing wider than taller, even her "hands" with the fan leaves are bigger than mine, and now it will be wider because of FIMming. The Gelato Cookie D'ohpe is also fine I started LST yesterday. I will continue the same way of fertilizing this week on Friday 2x, Saturday in the morning, Monday 2x, and Wednesday 2x. I raised up the water quantity so from today I will give 75ml per plant 2 times (Morning, Evening) so 150 ml per plant, altogether 300 ml. It also applies when I fertilize the plants, but the only difference is that the water is with bat guano and acacia honey mix. This Friday ( Day 32) I did not water them to not to be overwatered. I just sprinkle now for the night. This Sunday was fertilization day also, Saturday I did not water them. Gelato Cookie D'ohpe started flowering this week, pre flowers can be seen. When it is harvested, I will set the light schedule 12/12 for the Purple Punch to start flowering. The Gelato Cookie D'ohpe is autoflowering, the Purple Punch is feminized. What a mix yeah, but it is my first time growing. Tuesday update: Gelato Cookie D'ohpe is stretching rapidly, flowering time started. Purple Punch is growing also very well new shoots are coming. End of the week Gelato Cookie D'ohpe is 40cm, it started stretching so quick due to flowering. Purple Punch is 26cm.