Likes
Comments
Share
Hi guys, we're working tirelessly and passionately to expand the canopy of this wonderful plant. Its branches are really long and are already starting to produce hard, frozen buds.😊😋
Likes
2
Share
Added the second EVO3-100 and put them in their final Position. They grow pretty even in hight, are hungry af. Deciding this week which branches to keep. So far no problems, roots are nice and smell good too. Air Temp: 25,5°C Leaf Temp: 21°C-23°C VPD : 1,1kPa
Likes
13
Share
Dropped light hours down to 16 . Topped off nutrient solution with 5.0 ph evened out .removed none chosen phenos to be flowered in separate room no longer tracking those we will only follow the chosen mothers clones i cut clones today as well had the lady friend clean floor with bleach and dawn put clones in ez cloner 32 systems
Likes
31
Share
@Endriu
Follow
Hello Bros&Sis! Ciao!😊 this time I've decided to made a video update, from the start of the week to the finish, we're gonna see some BIG differences! (The longest is from the end) About the ladies: Girls in coco Royal AK- she's drinking every single drop op solution and has literally exploded! I'm really happy about her training (top/lst/hst). A very strong strain. OG Kush- I don't get this girl, she's definitely not an heavy drinker. Speedy Chile FF- when I re-potted her into 6lt pot, some of my Bros hoped for a Baobab, what do you think?😂 (has some mutations, has a growth of 3 leaves and then 2 branches have joined together and the other has grown normally) Ladies in Soil: UK Cheese auto- I've broke a branch due to heavy crop. Lesson learned. Pink Doc CBD auto- she's growing good, finally! The only thing I'm worried about is that she will not grow so much, because switch is near. Candy Kush Express- A really nice lady, not too tall, good side branches and she take everything with no care less (one of the most "broken" in the tent) Special Kush#1- She likes her new pot, but there's something wrong (see leaves) maybe related to VPD or RU? I've used different techniques on this ladies, but the one I like the most is cropping the branches and the main stems and also broke the branches where meets the stems, to give'em more power, and more "space" for nutrients transports in sight of bloom! That's all mate, we will see soon for the next update! Ciao!😙 (hey @Growdiaries if you want to use my video, feel free to do it, but please, don't change the music, it's already on YT and for CC use)
Likes
37
Share
So am 15.05. hab ich nun das Licht umgestellt. Eigentlich wollte ich den Pflanzen noch mehr Zeit in den Töpfen geben aber die Zeit wird knapp zu meinem Sommerurlaub daher muss das ihnen reichen. In den nächsten zwei Wochen wachsen haben sie ja auch noch Zeit weiter zu wurzeln. Würde mich aber mal intressieren ob die Wurzeln in der Blüte irgendwann das Wachstum einstellen? Diese Woche haben die Pflanzen endlich mal etwas nach Dünger gerufen, dem Wunsch kam ich natürlich gerne nach. Versuch meinen VPD immer so auf 1,2 zu halten, denke das ist ein guter Kompromiss zwischen den Wachstumsstadien. Generell bin ich sehr zufrieden wie mein erster Homegrow so verläuft und das die Pflanzen so gesund sind. Macht aufjedenfall mortz den Spaß und hab auch schon sehr viel dazu gelernt.
Likes
4
Share
Plant are under the structure i build. It will he used to provide shade, protection against moths and shelter from heavy late summer rains. Every now and then plants were trained through LST. I watered twice a day about 2% of total volume.
Likes
Comments
Share
@pareto
Follow
Looks absolutely awesome. This is my first photoperiod and you can really tell the difference in density and overall quality. I wet trimmed her and froze the sugar leaves to try to make my first hash. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Set up cost (fixed costs) -Lamp: 40€ -Timer: 3,5€ -Pot: 4€ -Total fixed costs: 47,5€ Given 5 years (or 15 grows) usage time translates to around 3,17€ per grow in materials. Variable costs: -Seed: free (gift) -Soil: 6€ -Fertilizer: 3,50€ -Power: 15,21€ -Total variable costs: 24,71€ -Total costs per grow: 27,88€
Likes
6
Share
@Dennisgut
Follow
7.1 weeks The weather is great now, much sun. The plants need bit more water, they love it. Stay in tune 27.06.24 7.8 weeks now. The middle one don't grow in height anymore, the buds getting bigger. The right one get now the tallest, 70 cm right now.from yesterday to today just 5 cm in height grow! The left one now are in flower stage... Looking good.
Processing
Likes
28
Share
I wish I would of taken pics of them before I trimmed them up because they were a massive bush!!! At this point im satisfied with the number of potential cola's and size of the branches. I can already see preflowers coming from some of the nodes which is crazy because i've never seen any of plants in history doing this. Its also the first time i've taken veg past 3-4 weeks but mainlining does extend the veg time some. Today i've switched to 12/12 so next week will be the first update of flowering!!! quite excited to finally get to this stage.
Likes
3
Share
@CBDLord
Follow
Ezen a hèten kapott utoljára tápoldatot.Tiszta szűrt vízzel öntözöm.Szèpen sárgulnak ès hullanak a levelek.
Likes
19
Share
@PPFDaddy
Follow
Hey everyone! Another week has flown by for the Stickies, and as usual they haven't slowed down one bit. Flowering sites are multiplying nicely across all plants. Two of them haven't developed the thickest stems yet, but it's still early days and plenty of time to see how things evolve. On the feeding side, I raised the EC by another 0.1, as runoff EC was consistently coming in below input. Plants are handling it perfectly. The box has a clear boss this week. Despite topping, LST and even super cropping on some of the main stems to keep her in check, she's hit the 1 meter mark and shows no intention of stopping, making the canopy uneven. She's being watched very closely. VPD keeps dropping as the dense canopy pushes humidity beyond what the current dehumidifier can handle. If it stays consistently above 65%, I'll be adding a second unit for the final weeks of flower to ensure tight, dense and resinous buds at harvest. First pistils appeared over the last couple of days. Bud formation is officially underway and I'll be supporting it with Big Bud. I love this hobby. At this point it's a full-blown passion, bordering on obsession. Happy growing everyone! 🙌
Likes
13
Share
Today i flip the light. 12/12 for the bloom. The bright appearance of the leaves and the slightly reddened stems indicate a nutrient deficit. In this case I would say nitrogen. But I have exaggerated a bit with my fertilizer use. Accordingly, I flushed the plants today. The measured pH was 4.8. I think I slightly salted the floor. Let's see if they recover. Day 73: On the detail photo you can see very well how the stem turns slightly reddish and the stems on the leaves as well. Day 74: The plants look better than a few days ago. They are now growing visibly from day to day. Timely flushing saved a lot, I hope. Day 77: Last day of the first week of flower. It was a strange week. But they still grow.
Likes
24
Share
WEEK 10 - 10/4/2021 - 16/4/2021 10/4/2021 - Day 1 flowering! 13/4/2021 - Something came up and I have to leave my plants for 2 days. I thought of hooking it up to Autopot again but then I would have to do a major flush again and that would stress the plants. I think they can wait for 48 hours. I'll fertigate again before lights off tonight. 20 gal water mixed with the following: Liquid silicon - 1ml/L - 76ml Cal Mag - 5ml/Gal - 100ml Micro - 2.5ml/Gal - 50ml Gro - 2.5ml/Gal - 50ml Bloom - 2.5ml/Gal - 50ml Fulvic acid - 2.5ml/gal - 50ml Hydroguard - 2ml/gal - 40ml Rapid start - 1ml/gal - 20ml Chitosan Olligosaccharide  - About 30 ml. I ran out of pH down and improvised with Chitosan. Managed to bring down the pH to 6.2. Improvise. Adapt. Overcome! :) pH - 6.21 EC - 1.28 mS/cm T - 26 14/4/2021 - The HLG 550 light seem a little dim these past week. After checking with a Quantum PAR meter, the PPFD was only around 400 mid section at 24 inches height from canopy. At first I thought it was the LED diodes but after disconecting the dimmer potentiometer, the PPFD went up to 1200. So it was the dimmer malfunction. So I just left the light as full brightness 24 inches above canopy since the girls are in bloom now, 16/4/2021 - Major defoliation done for all 8 plants. Basically removed any large leaves shading the lower nodes as well as to improve air circulation. Did supercropping on several branches to maintain even canopy.
Likes
4
Share
Twenty20 Ateam R&D Update! Wow this week went so great, Germination was 100%successful!! We went with the usual paper towel method an they all popped up in the soil on Saturday the 28th! Let’s grow lil babies let’s grow!!
Likes
24
Share
@Grnhead
Follow
The smell is really starting to come in. Bought 2 sets of 80 mm internal fans to increase the airflow through the plant and in the box. Many of the lower leaves are curling down and I think it was a mixture of the high morning humidity and the lack of air flow. Now there are 5 internal fans and a large external fan, and it should be more than enough air flow. Growth is starting to slow finally, the height is perfect right now but I have a feeling it’s going to keep getting taller. I keep tying her down as best as I can.
Likes
39
Share
4/15/25 Things are progressing nicely. Some plants dont seem to be doing too much but 3 of them or so that are really standing out. Im curious if some of these are going to be longer flowering time than anticipated with the very obvious sativa dominant plants.
Likes
2
Share
So I am halfway through my first harvest and I'm starting to feel like I may have been impatient! Would appreciate any advice or constructive criticism from any experienced growers out there! Do you think I harvest the rest of my plant now or leave it a while? Any tips/hints on the best way to maximize bud density? Thanks in advance
Likes
13
Share
Likes
30
Share
@Dunk_Junk
Follow
Day 104 - Final harvest taken place after I noticed a sprinkling of amber trichomes over most of her flowers. I will update this diary in a week or so with dry weights. I did not bother to weigh it wet. Upper buds seem nice and dense.
Likes
144
Share
@DevilsBud
Follow
New week for my new Fam Very happy what i have growing now It's again multiple different strains. Mix off spices is never a bad thing hé All growing Great nothing to complain and not a lot to say so far 👌🏻 20/2/22 All are now in there 0.3l pots and will stay there for until i see roots sticking out and finally will be transfer to 11L ore 15L pots will see will be adding mycorrhiza mix 🤜🏻 to transfer we going to blow this grow up into the sky And remember just grow weed and stop growing bullyish behavior visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter