Likes
Comments
Share
Likes
Comments
Share
left the tent door 1/4 opened by accident on week 3 day 5 hoping for the best for my girls 😩
Likes
27
Share
@MrJones
Follow
OSS Cheese XXL 🔹⊱╮🔹╰⊰🔹 GROW Started 03.10.24 INFORMATION 🔹╰⊰´🔹⊱╮🔹 🌞Environment - Maintaining 80F and 65%Humidity 🌾Training - Nothing this week just letting the seedlings veg out. ⚱️2-Gallon 📊6.2 PH 💧 Feeding - Using Horti Grow 8-11-21, Bloom 5-15-26, Late Bloom 0-24-26, Cal 12-0-0 🌞Medic Grow Smart 8 760 Watts 🕷️ IPM - CannControl from Mammoth and Mosquito Bits as needed 🔹⊱╮🔹╰⊰🔹 PLANT UPDATES 🔹╰⊰´🔹⊱╮🔹 📝 Notes - These girls have completely transformed into their new buckets and have started to drink up, increasing the amount of fertigation, (Nutrients and H20), and defoliation to expose the lower growth. 🗓️03.29.24 Maintaining Temps and Humidity - Plants are Looking Great! 🗓️03.30.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. I defoliated the plants to water them better and the middle growth could get more light and develop. 🗓️03.31.24 Maintaining Temps and Humidity 🗓️04.01.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal. Check out the amazing growth and recovery after the defoliation! 🗓️04.02.24 Maintaining Temps and Humidity, watching these ladies are just nailing the veg phase. 🗓️04.03.24 Today fed with Hort-Grow @ 3.3 GRMS Per Gal, and Horti-Cal @ 2.5 GRMS Per Gal 🗓️04.04.24 Maintaining Temps and Humidity, closing out week 2 of veg and these ladies will need to be defoliated again, this new nutrient line from Greenpnaet is killing it, and so easy to use! ╰⊰🔹╰⊰´🔹⊱╮🔹╰⊰🔹╰⊰🔹STRAIN INFORMATION🔹⊱╮🔹╰⊰🔹╰⊰🔹╰⊰🔹⊱╮ Cheese XXL cannabis seeds are a special blend of Afghan Kush x Super Skunk producing the most pungent dank weed. Cheese XXL is the third commercially available edition released by Original Sensible using and developing these Afghan and Skunk genetics. The first release of these genetics was their Skunk Afghani. The second improved version was Stinkin' Bishop which had an improved and more potent THC content and was more pungent in terms of smell. Now the third and improved release on a similar theme is this Cheese XXL which has a similar THC content but with an improved heavier yield. The smoke is incredible with an outstanding flavour of pungent skunk and spicy, extra strong mature cheese created by the dominant terpene myrcene with its strong earthy scent accompanied by caryophyllene and pinene which combine to create a peppery acrid cheesy odour. THC levels are exceptionally high in this Cheese strain and the effect is well-balanced creating mental and body relaxation with a remarkable alleviation of stress and depression. The strong pungent aroma starts early in the flowering period, if you're growing Cheese XXL indoors you'll need plenty of ventilation to disperse the stinky "road kill" aroma of these babies! Cheese XXL is a Cheese strain particularly suited to indoor setups but also thriving well outdoors these feminised marijuana seeds are incredibly resistant to mould and disease and produce a substantial harvest that both the professional and amateur growers alike can easily achieve. These Cheese weed seeds are outstanding, break open the buds ready for use and you'll see why, the stench will make your eyes water! Cheese XXL from Original Sensible Seeds is a great choice to break into the commercial market of growing cannabis so if you're looking to buy something special with extreme yield, potency and flavour then Cheese XXL cannabis seeds are simply the best choice
Likes
5
Share
So it’s been 11 days since I last seen them we’ve had a couple showers of rain between that time, she’s started flowering.. Some animal has helped itself to a few tips and leaves, only took probably 2-3 tops and a couple leaves but mustn’t of enjoyed it.. I hope so anyway. 🤞 So everyone how does it look?? Anything I should do?? Any tips on how to support the branches for when they get abit heavier? Thanks everyone!!
Likes
35
Share
@Jacks_Pot
Follow
The 3th week of 12/12 is history and flowering has entered the grow room. 😋 I marked day 53 (day 17 of 12/12) as the first day of actual flowering. Everyday I've checked if there were fungus gnats trapped on the yellow sticky traps and I've spotted a few. So not a total infestation. I've also checked for signs of hermies and I haven't seen any. I've had one a few years ago and it pretty much ruined the whole grow. Seeds everywhere. But that was another breeder and strain. Under the screen I did some final pruning and above a minor defoilation. The Runtz are stretching nicely and the screen is filled pretty much like I wanted it to. Gonna leave them alone now, done with bending those shoots under the screen. This weeks temperatures stayed between 20,6°C (69°F) and 24,2 °C (75,5°F) and humidity levels between 44 – 56 % Light pressure was raised from 244 watt at 70cm (27 inch) to 260 watt at 63cm (25 inch). Their diet consisted of ph adjusted tapwater (ph 6,38 – ec 0,49) most of the week. They were barely fed for 1 day. Gonna keep it that way as long as I don't see any signals of shortages or surpluses. Naturally, ec leves will rise next week but one day of feeding seems enough for now. Smell is coming in slightly, but the CAN-lite carbon filter is doing it's job. There's a 600m³ one hanging in the grow room connected to a 550m³ Airfan foam softbox that's dimmed at 40% since the start of this grow. That was the most important info for this week. Up to next week's flowers!✋ Do you want to grow this strain? 👉 https://www.zamnesia.com/6000-zamnesia-seeds-runtz-feminized.html 👈
Likes
16
Share
Finally coming to an end this week, didn’t get to properly flush the nutrients out to see the leaves begin to fade but next grow i will pay more attention to this. Definitely needed to hold the plant up using chopsticks but hey it worked
Likes
15
Share
I cut out the nutrients and let the plant do its thing. I also noticed the plant had been pollinated and was starting to grow seeds, so I cut her at the end of this week, a week early. I left a portion of the plant to seed, but the rest was cut and hung. The branch I left is showing toxicity, proof of the intensity of nutrients this plant needed to survive. I tried to combat this with PH balancer to keep the cola productive and not toxified by the excessive nutrients needed by the rest of the plant that wasn't there. I was successful by prolonging the life closest to winter by building a heat trap, and mulching the ground beside the plant.
Likes
156
Share
@StarLorr
Follow
Helloing 👋🏻friends and visitors. Welclone to my Clone diary🙃 Both Clones are doing fantastic! Some leaves are changing colour from green to burgundish underneath and dark green on top. Some top buds have so much frost on them that I mistakenly thought it was mold😳😅 all is good though 😉 ______________________________ Feeding: Tue 12Dec: 3L each w/nuts pH'd 6.5 Fri 15Dec : 3L each w/nuts pH'd 6.5 Mon18Dec:2L each water only pH'd 6.5 _______________________________ Thanks for stopping by, likes and comments are appreciated 👊🏻😎 Keep on growin! Keep on tokin!!! 😙💨💨💨💨💨
Likes
17
Share
Processing
Likes
27
Share
@BudXs
Follow
Getting there... cant wait for Spring Walls are up and painted, floor is laid, electrical all done, exhaust outlets mounted. Ive started to install the trim - I decided to put a grey stain instead of boring paint on the floor trim boards. Looks really solid against the dark bamboo floors. I used two gallons and two coats of flat pure white paint for walls and ceiling. Should give me a reflectivity somewhere around 80%. Some may ask why not opt for mylar? I just dont like the look. I dont care too much for reflectivity, as I will be well above the required watts/sqft with the light setup I will be using. I mounted an electrical receptacle in the ceiling, I thought it may come in handy for cord management. Im going to mount the 3 x meanwell drivers outside of the grow room and run some extra long cables to them. This is to keep heat out of the room, any little bit helps. Will be running a 8inch fan with about 750 CFM in order to properly vent the room. Intake will be a door vent and the negative pressure the fan provides. Odor is not too much of a concern, but may as well add a carbon filter. Tables to be built this week after trim is installed Week 1 Spend - $2080 Week 2 Spend - $350 (mostly on hardware store visits) Total so far - $2430
Likes
6
Share
Hello Diary, White Widow has completed her second week in the vegetation phase. In a week, it grew 8 cm and began to form places where flowers will begin to appear. Sometimes it's surprising how quickly plants develop and grow if they have good conditions. All in all, these first two weeks are developing very nicely. Since it's the middle of summer, the temperatures are still high, but for now I don't see that it doesn't suit them. Sometimes it is over 31 degrees in the grow box. I make sure that the soil does not dry out, so I increased the amount of water when watering. I continue to add Bio Grow Fertiliser and CalMg with each watering. pH I drop to 6.0 with Plagron's Lemon Kick. At the end of the week, more precisely after taking photos for day 14, I increased the power of the led lights to 60%. Here is a quick overview of the week: 04/08/2024 - Day 11. Watering. I prepared 6 liters of water, added the previously mentioned nutrients and with that amount I evenly watered all three plants on the farm. 07/08/2024 - Day 14. After taking the photos, I watered all three plants on the farm in the same way as three days earlier. White Widow - Day 14. - 14 cm That's all from me for this week, see you soon.
Likes
Comments
Share
Für die Dancing Sprite gab es diese Woche das erste Topping und ein klein wenig Entlaubung. Die Seitentriebe entwickeln sich langsam in Richtung LST. Dadurch, dass ich ein paar der Blätter entfernt habe, sollten sie sich recht rasch nach oben strecken. Den Abstand zur Lampe hab ich ein wenig nach oben angepasst, um den Wachstum etwas mehr anzuregen.
Likes
70
Share
@Roberts
Follow
Big fat wedding cake is looking really good under the Spider Farmer G5000/UVR40 lights. I switched the lights to a 12/12 today. Time to get some flowering started. I will be changing the solution in a few days to a blooming mix. Everything is looking great. Thank you Spider Farmer, Athena, and DutchFem Seeds. 🤜🏻🤛🏻🌱🌱🌱 Thank you grow diaries community for the 👇likes👇, follows, comments, and subscriptions on my YouTube channel👇. ❄️🌱🍻 Happy Growing 🌱🌱🌱 https://youtube.com/channel/UCAhN7yRzWLpcaRHhMIQ7X4g Spider Farmer Official Website Links: US&Worldwide: https://www.spider-farmer.com CA: https://spiderfarmer.ca UK: https://spiderfarmer.co.uk EU: https://spiderfarmer.eu AU: https://spiderfarmer.com.au G5000 Light Amazon Link: amzn.to/4643esa UVR 40: https://www.amazon.com/dp/B0BR7SGTHS Discount code: saveurcash (Stackable)
Processing
Likes
33
Share
Day 27 flowering: I am so glad i stuck with this lady now. seeing her stacking ready for her huge colas coming is a relief. She has not skipped a beat in the heat and has continued to build those beautiful stacks. I have hope she has restored my faith in Hulkberry as a strain now
Likes
21
Share
Very pleased with my results! 🔥💪 trichs started turning amber sooner than anticipated, so i went ahead and gave her the chop. Very smelly and lots of trichomes. Didn't weigh or sample anything yet, ill be back with a weight update after drying ✌️ -update- final dry weight is 89g, and have it jarred up now with boveda 62% packs. Also got about 30g of sugar trim/larf ill use for butter. It may have gotten a bit too dry but i hear the humidity packs will help. Vaped a bowl to test and it was very sweet and floral tasting, and seemed pretty strong from the small tester out of a dynavap. Overall very happy with the outcome and with this strain. Happy growing! ✌️✌️
Likes
Comments
Share
Secando aproximadamente 10 días y después trimmear y curar en frascos