Chopped her a few days ago @ day 62. She’s in the vcure now for the next 12 days. Looking forward to sampling her soon!

💩Holy Crap Growmies , we are outdoors and in the Ground💩 👉It's been another full week 28 days from seed and she's doing great , very nice Growth, considering shes been up against the wind and rain 👈 No problems 😊 so far so good 👍And she's showing more of her preflowers 😁👈 I GOT MULTIPLE DIARIES ON THE GO 😱 please check them out 😎 👉THANKS FOR TAKING THE TIME TO GO OVER MY DIARIES 👈 👉NutriNPK NUTRIENTS USED FOR FEEDING 👈rain water to be used entire growth👈 👉www.nutrinpk.com right now get 10% off using SPRING2022 as the coupon code👈

FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny REMO NUTRIENTS 👍 Thanks for taking the time to read and check out my diary🤜🤛 TS3000 FEATURES: WIDEBAND SUNLIGHT FULL SPECTRUM LED GROW, Infinite close to natural sun light, suit for all plants whole stages indoor growing, rapid plant response from seed to flower, achieve maximum quality and quantity, much better than traditional HPS grow systems. HIGH REFLECTIVE & NOISE FREE-Fanless LIGHT BOARDS design will make your growing life easy and quiet, quickly heat dispersing material aluminum reducing light lost to aisles and walls, increase the light intensity up to 20%, allowing your plants receive more energy and without burning your plants for maximum headroom. HIGH EFFICIENCY ENERGY SAVING PLANT LIGHT, high-power NEW LED grow, Compares to traditional 3000 watt HPS lamp and other brand led grow light while only 450 watts true output with 1016 LEDs, more scientifically and energy-efficient! Perfect for 5' x 5' veg stage, 4' x 4' bloom stage, higher intensity in a MARS HYDRO grow tent, reflective area, or by crossing over using multiple TS3000. BOOM YIELD LARGE GROW LIGHT, NEWEST SMD LED technology provide highest PAR/LUMEN output(1095.6umol/), makes you get 30% higher yield compare OLD led lights, can get max yield at 2.5g/watt, less pay but get more yield, bring a amazing grow trip to any home grower as it beams huge amounts of light energy to plants below. COMMERCIAL LED GROW LIGHT, Updated easy dimming & daisy chain function, main light controlled, especially come with two waterproof and dimmable Mean Well Drivers, auto sensing power supply works on both 120VAC and 240VAC and 277VAC, suit for Large Rooms and Commercial Setups. Low Energy-Consuming LED Grow Light: Consuming 300w and also mounted with 1016 chips, TS3000 has the ability to replace a 450w HPS light while reducing 40% power intake. High Efficiency LED Grow Light: With overall light output PPF 343umol/S as well as amazing PPE 2.3 umol/j, it's 50% even more photon efficient and can assure a 30% more return than the old HPS/MH lights. Patent Highly-Reflective Hood Shape: The reflector design on TS3000 is patented, which can effectively gather the light dispersed in all directions to enhance its light intensity as well as assist plants in absorbing more light. Full Spectrum Plants Favorite Spectra: By the unique mix of spectra that makes most light in the 400-700nm waveband, incredibly conducive to plant photosynthesis. Adequate IR(730-740nm) is additionally consisted of in the range to generate larger buds. Dimming And Daisy Chain Feature Available: Upon an independent dimming button on the external driver, backing 0-100% settings adaptation and up to 30 LEDs daisy-chained in a group, it supplies different light levels for various plant stages meanwhile saving energy. Safety Certifications And Service Warranty: CE, ETL, RoHS, UKCA security certifications accepted, 50,000 hours durability, 5-year service warranty, and local after-sales repair 5x5 GROW TENT: LOCK ALL LIGHT INSIDE MARS HYDRO Indoor Grow Tent interior is made of diamond mylar which is highly reflective. (Other brand's mylar and reflective rate is as low as 50%, won't provide efficient light. )MARS HYDRO 1680D canvas, being double stitched, it is tear proof and has perfect light locking. Mars Hydro's grow tent keeps 100% lighting beams inside and helps your plant absorb more lights. EXTRA-THICK --No light leaks or rips at all DURABILITY GROW TENT Stable metal corner adapters and poles are the trustful supporters of the tent, standing sturdy, neither rusting nor paint-falling, quick easy tool-free installation. Mars Hydro's heavy-duty metal zippers, with double layer black lining, are the best on the market which create a light-proof seal EASY OBSERVATION FOR YOUR PLANTS. Special observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The observation window also serves to dissipate heat and ventilate air AUTOMATIC 6 INCH EXHAUST FAN KIT W/ CONTROLLER: Mars Hydro 6'' Inline Fan uses a mixed-flow design to maintain peak performance in a high static pressure environment. GROW TENT FAN: MARS HYDRO inline fans are designed to ventilate hydroponic grow rooms, transfer heating/cooling, cool AV closets, and exhaust odors. EFFECTIVE VENTILATION: Variable speed controller for easy fan speed adjustment. Optimal ventilation for your planting. LOW NOISE LEVEL: Durable plastic fan housing and blades for extremely low noise(32dB-A); create a truly quiet growth environment. EASY INSTALLATION: Removable duct ends with locking tabs for quick removal and easy maintenance and a cord length of 4.9 feet for hassle-free setup. This grows tent fan with a controller for easy fan speed adjustment. BASIC PARAMETERS: Ventilation exhaust fan size: 6” | Dimensions: 315mm*225mm*210mm. | Weight: 2.7. | Airflow: 402CFM | Noise: 32dB-A | Bearings: Dual Ball. 

Flushing as we speak! Chopping this plant in 2 days to get a harvest done before the competition ends! This is an amazingly fast plant! Resin production- ✅ Terps - ✅ Fast - ✅ Easy to grow - ✅ I cannot say enough about this lady! Just fed an average amount of nutrients. Vegged a little longer because of flower tent overflow, but once she flipped, she was fast and quality all the way! More details to come! ✌️🏻💚

More pics and videos coming soon

So here’s Week 2 of the Sweet Seeds Gorilla Girl XL Auto’s grow. All in all an easy week but there has been time spent reinforcing a couple of the seedlings because they are so top heavy. I check in on my seedlings at least once a day (oftentimes 2-3 times daily) just to make sure that all equipment is functioning well and temps are stable. Upon looking into the windows of the tent I discovered that the smallest seedling (the one that lost one of it’s cotyledon leaves) was tipped right over. I gently supported her with a homemade splint (a tent peg/pipe cleaner combo- pictured above) and she’s currently standing on her own again. She’s still smaller than the others but surviving, not thriving for now. I used some fresh additional soil to fill in any gaps and pack down around the bases of the other three plants’ stems. Speaking of stems/stalks- the three healthy seedlings have peeling/stretching stalks and are starting to push out their first sets of branches. Other than that, same routine as always- watering every fourth day at 1.4 litres per watering or 0.35 of a litre per plant per day. I will be increasing the water sometime over week three. That’s it for now. Mom’s Tip for Week #2- Don’t Over Water! (when growing in soil of course)… When learning to read your plant’s needs, water is a very important factor to consider. I often notice other growers with tiny seedlings sitting in completely saturated pots of soil. Or read that many other growers don’t believe in placing newly sprouted seedlings into their final containers/pots. Both issues being easily resolved by simply paying close attention to your plant’s body language, it’s grow environment and sticking to a schedule. Cannabis truly thrives and benefits from a wet to almost fully dry watering cycle. From my own personal experience with photosensitive strains grown outside in the summer to growing autoflowers indoors through the fall, winter and spring- all of my Cannabis seems to do best when watered every 4th day like clockwork! This schedule is somewhat subjective of course depending on the environment that you are growing in. Here in Canada, much of our year is cool to cold and the humidity is relatively low. Because of this my plants are not always able to take in moisture from the air through their stomas so they suck up more water from what’s readily available in their pots. In other environments (ex. tropical), you may be able to stretch out this cycle- watering every 5-7 days because your plants are pulling so much water directly from the humidity in the air. And how you water your plants matters too. When starting out with newly sprouted seedlings placed into their final containers- less is more. There is no need to completely soak all of the soil in a 5-7 gallon pot. Simply start with a small amount (0.5-1 litre) directing the water to the base of the plant, working your way outwards in a circular pattern. As you increase the amount of water, I try to work my water outwards- making my circle slightly bigger each time I water until eventually I am soaking the soil surface all the way out to the edges of the pot. This process is gradual, stretched over a period of 4-6 weeks. It will encourage the roots to reach for water and allow your plants the time needed to grow into a heavy dose of H2O. Finally, learning to read your plant’s body language will help you to understand when they need and don’t need water as well as food, more/less light, temperature changes, etc. Healthy, well watered plants are generally light green with leaves slightly turned up towards the light/sun. They will be growing/thickening every day and able to support their own weight even in a very breezy environment. Leaves are soft and supple, not dry and brittle and there are usually no marks or discolouration of any kind on the foliage throughout your grow. Water quality is important too but that’s any entirely different tutorial for another time. Bountiful harvests are very possible by simply tweaking your watering schedule to suit your plants’ ultimate needs.

Day 122 / Week 7 of Flo: Since the colour of the fanleaves is fading away pretty quickly, i decided to add in a little nitrogen (in form of BioGrow). I havent been feeding any nitrogen since the beginning of the 5th Week of Flowering. Only the little that is in BioBloom, that is only 2% The complete solution i used is following: 16l Water (4 each plant) 8ml Bio Grow 48 ml Bio Bloom 16ml TopMax 48ml BioHeaven 48ml ActiVera Day 125 / Week 7 of Flo: I am not adding any more nutrients at this stage and i started watering every plant with 2,5l of water every two days as their demand is not that high anymore and i wanna keep humidity down to a minimum to prevent bud rot. To give you an idea in early Flowering i was watering every plant with 5-6l every 3 day's, from 5th week on i was giving them 4l every 3 days and now only 2,5l. As two of the plants (Plant #2 and Plant #4) are starting to look like they are close (about 10-12 days) to harvest i am considering to flush them one of the next days. The other two plants (Plant #1 and Plant #3) seem to be of the same phenotype and look like they can take a few days more, let's see.. Also they grew bigger and stretched more in flowering then the other two, maybe a little more sativa genes.. Day 127 / Week 7 of Flowering: Today i flushed plant #2 (back left) and plant #4 (front right) with 20l of fresh water 💦 from the well. Plants #1 and #3 are recieving 2,5l of plain water every second day for a few more days. Soon i will flush them too.

Even though it has only been 4 days since my last update, I want to upload whenever I do more then just water my plant. Something that being said since my last upload I did put more of a bend in the main stalk and defoliated alot of the up higher and down low branches trying to keep it all the same height.

The giant falls !!! Uau what a smell! Diesel and flower! Almost 90% of the plant its good to smoke... amazing! Sweet to smoke! Strongg!! :-) Dry aspect... Sweet and strong on smoke. worked well on a 20liters pot. TopCrop soil. thank you!

Hi all! Lemon Tree! not just called it that! not visible in the photo. but the leaves and the buds themselves began to take on a citrus yellow hue. like a lemon!)) there are countless trichomes. and the smell, oddly enough, is almost none. very weak. I think in the second half of flowering the smell will begin to intensify. in general, the flowering is going well!

All done all done there we go bam First ever successful grow I’m psyched, can’t wait to do four more of this strain under a way better light and see how dense I can get those nugs Recommend any new grower looking to try out some auto flowers.

Buds are forming nicely. Haven’t had any issues lately. Plants are thriving.

Week 12 During this week I will continue to flush the plant only with water. I guess that this could be the last week, let's see what trichomes will say! D79: added 5 liters of tap water to continue the flush. The plants has stunning colourful buds! D81: added 5 liters of water. Trichomes check: there is a quite good balance between amber and milky; two days to the harvest. D83: end of the journey!

Wir haben am 5.3 mit leichten LST bei Black Cream#2 begonnen bei der giessung haben wir 2ml roots und Stress Dünger bei gepackt. Wir haben bis jetzt noch kein PH minus gebraucht. Ph wert der Erde beträgt 5,5-6,0 und das Leitungswasser ist zwischen 7/8/9. die Blätter beider Pflanzen sehen sehr gut aus und die Seiten Triebe kommen auch gut nach. Sie hat also an einen Tag ein paar gute Zentimeter gemacht. Richtig krass 🌱💚 8 von 10 Fotos wurden am 5.3 aufgenommen und eins wo die Black Cream#2 hoch gekommen wurde am Tag der Veröffentlichung gemacht. Ich werde es kennzeichnen mit 6.6 08.03 Edit: es ist viel passiert beide haben die Vorblüte erreicht. Da wir aber noch in der 4Wochen sind dachten wir uns das es cool ist ein sauberen Abschluss der Vegi Zeit zu machen 🌱 ab Woche 5 fängt die heiße Phase an 🤩

All good;)))))

🔥🍧

Aficionados French connection. La fais don pour que j’essaie la Spanish blue elephant planter tardivement au mois de juin elle va pas tarder à passer en flo

Hey guys! Sorry for the big delay since my previous grow! Right now I'm growing some babies from Royal Queen Seeds! Kali Dog! 😃 The first week was calm! The babies broke out from their shells rather fast and two babies grew out of their jiffy pods rather fast! Also, since the strain is Kali Dog I decided to name each of the plants with a different dog name! I'm still unsure about the names but the first two are called Roko and Max! For the first time I also noticed the first buds looked... different? You'll be able to see them in the photos tho... and once again two of my babies are suffering from helmet head 😰 But eh, I'm used to it. Gladly it's an easy error to fix. I'll try to make a longer timelapse (these were bad!) but I didn't know my camera battery wasn't enough for long sessions 😝 Anyway, thanks for reading! See you all next week! 👋

Starting week 1 of flower on this Forbidden Runtz Auto from FastBuds! She has been a pleasure to grow so far! She hasn't shown many signs of issues at all. She is definitely a little thirsty right now so we will take care of that immediately. More updates soon! Day 48 we removed some dead and dying leaves from her lowers. Still growing awesome though! Haven't had to adjust the tie on her main branch or anything. She has been basically maintenance free! She even spread herself out beautifully!