Likes
Comments
Share
Servus Moin! Bin richtig zufrieden mit der Pink Poochie. Schöne Knollen. Alles was man will.
Likes
9
Share
🌿 Grow Update: Day 2, Week 8 of Flower 🌸 Hey fellow growers, We’ve hit Day 2 of Week 8 in the flower stage, and wow, she’s smelling delicious! The buds have definitely grown since the last update, but nothing too dramatic. Still, her appearance, aroma, and stickiness are on point. Not too shabby for my first run! There’s a fair amount of larf below that I’ll be tossing, but the top buds? Holy smokes, they’re looking fantastic. I'm aiming for at least 3 ounces, and if I hit that or more, I'll be over the moon! I'll be starting my 2-week flush very soon to ensure the best quality for the final product. Wish me luck as we head into these final weeks. Let’s finish strong! 🌿💪 #GrowLife #Week8 #FirstGrow #FinalStretch #FlushingTime Note : Good job i installed a scrog net as checkout my buds in the video posted they can barely hold themselves up if i never added a scrog id of been screwed would of either had to constantly check and tie them up or worst case scenario id of gone in the room and came across snapped branches bent over!!!! SCROG IS OP for huge plants
Likes
2
Share
Hallo zusammen 🤙. Sie wächst sehr schön und macht keine Probleme.
Likes
37
Share
######################################### HARVEST (Day 110 / December 21) ######################################### ----------------------------------------------------------- GROW SUMMARY ----------------------------------------------------------- Grown in 4x4 tent - but I only used 2x4 because of heater and dehumidification but each plant averaged a 2x3 canopy. Each plant had a dedicated light, Sage 2 used the HLG 300 V2 Rspec and Sage 3 used the CMH 315. It's not an accurate comparison of lights because there was some overlap but I'm just utilizing my resources the best I can for this dedicated autoflower tent. The plants were grown in hydroponics using a custom two-site PA hydroponics clone RDWC system with Advanced Nutrients Sensi Coco line, Microbial Mass and Orca for beneficials. All around a pretty easy grow and things went very well. Sage #3 had an issue just after stretch, and I think I burnt it a bit when the CMH was at 22". I also experimented with a single water change which was only performed when switching to bloom nutrients around week 7 and turned out surprisingly well - see the results below. It's always fun to see the two contrasting phenotypes side by side. ----------------------------------------------------------- HARVEST ----------------------------------------------------------- From day 106 to day 110, I just stopped feeding and let the ppms run down. No dark period and no flush. On day 110 they were chopped. I probably could have let them go a bit longer, but my concerns were growing with Sage 3 and the sugar leaves being brittle and flacking off onto lower buds promoting bud rot. The smell of this flower on the plant was funk and was hard to control the funk... even with a carbon filter. Trichomes are slightly amber, mostly milky overall. I'm convinced hydroponics can add a couple of weeks of veg time to the run compared to coco/soil. Cutting the Scrog net was required. ----------------------------------------------------------- DRYING ----------------------------------------------------------- The plants were dried in a 3x3 tent, so I had to cut the plants in 1/4 sections to fit in the 3x3 drying tent for a slow dry. Branches were hung to dry on burlap twine in a tent in complete darkness, branches upside down. The temps were dialed in at 60F by pointing AC at the intake vent on side of the tent. Humidity was dialed in at 63%/60F for 24hr, 62%/60F for the next 48hr. Then 60%/60F for the third day and onward. Ambient RH in my house is 30% due to winter so I had to use two humidifiers and an Inkbird controller to add humidity to the room and block the humidity streams from hitting plants directly. AC Infinity T6/S6 exhaust and intake fans were on the setting of '2' during drying until day 8, then I could turn down to a setting of '1' once the plants were not transpiring excess moisture. I pulled the branches to trim as they were ready around starting around day 12. ----------------------------------------------------------- TRIMMING ----------------------------------------------------------- I trimmed each branch as it was ready but there were times when I pulled more than I could trim without being interrupted so a few branches did overdry on my trim table due to the low ambient RH due to winter. Very few fan leaves on branches, so most trim was all sugar leaves. I went tight with trim to ensure a better flower product and more supply for edible totaling in over 11 ounces of trim product. ----------------------------------------------------------- CURING ----------------------------------------------------------- Flower product was transferred to 1L mason jars averaging 35g of product per jar. I added a mini hygrometer to each jar and boveda/boost 8gr humidity pack. The RH averaged 62-64% when trimmed flowers went in jars. I started by burping once a day for the first seven days, once every other day for the next seven days, rolling jars often. The burp was only for 3-5 second for air exchange. Because the flower product was already at almost 62% when packaged in jars, quite the contrast from drying in summer conditions, I only needed to burp once per day and mold really wasn't much of an issue due to low humidity in winter. ----------------------------------------------------------- YIELD ----------------------------------------------------------- * Weight calculated at 62% humidity after 10 day cure. ============================== FLOWER PRODUCT ============================== Sage 2: 301g (10.75oz) Sage 3: 377g (13.46oz) ---------------------------------------- Total: 670g (23.93oz) ============================== TRIM PRODUCT ============================== Sage 2: 204g Sage 3: 135g ---------------------------------------- Total: 327g (11.67oz) **I went tight on the trim for better flower product and sufficient supply for edibles, and is calculated in overall yield. ** All major fan leaves, stems, and branches removed from trim product. ============================== TOTAL OVERALL YIELD ============================== Flower: 678g (24.21oz) Trim: 327g (11.68oz) ---------------------------------------- Total: 1005g (35.89oz) (2.24lb) ============================== SPACE YIELD ============================== 1005g / 12 sqft (3x4 canopy) = 83.75g per sqft ============================== WATTAGE YIELD ============================== 615 Watts / 12 Square Foot (3x4 canopy) = 51.25 watts per sqft. 1005g / 615 watts = 1.63 grams per watt ----------------------------------------------------------- PRODUCT TEST ----------------------------------------------------------- On day 10 of cure, I tested the flower and passed some to a few friends for their input. Feedback was positive. One little bud was given to a friend and he reported it stunk his entire car. Sticky, trichome-covered fire! Smoke is smooth, no cough. White ash. The 60/40 (sativa/indica) is a blend that is on point. Sage Scout definitely is a heavy hitter; upwards of 3.5 hour noticeable head/body change with no couchlock at the end. In regards to flavor and smell, it's not fully there yet on only day 10 of cure. The flavors/scents are still muted but I expect the flavours to prevail after 6-8 weeks of curing. Very funky and strong smell that bursts past the mason jar lids. Piney sweet scent. ----------------------------------------------------------- REGRETS ----------------------------------------------------------- Honestly, I only have two regrets with this run. 1. More aggressive lolipopping! I just feel if I had lolipopped more, I would have had a denser product overall. The flower product is indeed dense, and all in all, I'm happy with the result, but it's I'm adding as a reminder for the next run. I need to be more selective. 2. I slacked on the training of Sage #2 due to the hard-to-reach factor which probably affected about additional 1-2 oz of yield. ----------------------------------------------------------- NEXT RUN ----------------------------------------------------------- 1. I’m was very happy with Microbial Mass product in combination with Orca. Once again, I was overall happy with Advanced Coco blend for RWDC. I went with Coco product because Coco is similar to hydroponics, the AN Coco line just has added Calmag to it. I didn’t really see any issues with the AN Coco line and I like the autonomous factor of AN sensi products because my photoperiod tent takes some of my attention, so it is nice to have this autolower tent on auto-pilot for the majority of the grow. 2. When harvesting, I did find a few spots of concern in the root system, so I will definitely upgrade the pump from 250gph to a 400gph for better flow to combat that issue. 3. My experiment with a single water change when switching to bloom nutrients was a surprising result. Sage 2 (purple pheno) performed well with no deficiencies which I had trouble sorting out the deficiency on Sage 3. I continue to wonder if it was salt build-up, but it seemed to start shortly after the change to bloom nutrients so maybe it was a nitrogen/calmag issue. I may add an additional water change mid-flower (week 11) to the next run and see if it makes any difference is the same conditions happen. 4. I'll also like to move the two-site system to the front of the tent for better accessibility to train the plants. 5. I'm also looking at the floorplan of the tent and I think I can run a single system in parallel next to this two-site system and still have room for heater/dehumidifier and still keep accessibility for training. ----------------------------------------------------------- FINAL THOUGHTS ----------------------------------------------------------- Night Owl genetics has performed once again in my RDWC setup. I also feel a dedicated light for each plant really helped improve the yield. If I calculate a 2x3 space for each plant, with a total of 615 watts / 12 sq ft, running at 51.25 watts per square foot is the result. In regards to gram per watt, I've calculated the result is nearly 1.63 gram per watt when using 1005g / 615 watts. My goal was a pound per plant, I was happy to exceed that goal line with autoflowers with 2.24lb total yield. ----------------------------------------------------------- THE END ----------------------------------------------------------- Thanks for checking out my diary! I typically journal in my notebook but I put some time and effort into documenting my grows on this platform in hopes it will help a new or experienced grower with their DWC journey. Any questions or suggestions are welcomed. Happy growing!
Likes
7
Share
@SUMAN
Follow
She Is A Slow Grower....
Likes
36
Share
7/14: Watered her today. Just plain water. Filled up half gallon jug of water. Filled reservoir back first line. 7/16: Bumped light intensity to 45%. Topped off reservoir at night. 7/18: Watered her today with the the leftovers of some treated water with Rapid Start from her half gallon jug. Prepping for new nutrient schedule next week. I am happy to say it seems like the WCC is responding well to the environment and feeding schedule. So Far So Good!!! 😁 Thinking of possibly starting LST next week. Please Comment if anybody sees anything wrong in the pics!?!?!? 👍 Also any tips on how-to/when to start LST would be greatly appreciated! ***** For this Grow****** “Day Air Temperature” will be the max temp of tent for the week. “Substrate Temperature” will be the average temp of tent for the week. “Night Air Temperature” will be the lowest temp of the tent for the week.
Likes
59
Share
@Rap_a_cap
Follow
Perfect tropical-like weather. No problems to report. Excellent growth. Still rearranging net tent as this bastard stretch a lot. The one that should have the fastest flowering is, on the other hand, terribly late compared to het sisters. But how long does this beast still want to grow? Royal Queen Seeds officially claims Pineapple Kush is better suited indoors than outdoors, for now RQS is wrong.
Likes
11
Share
10 weeks total time from popping out of the rockwool. Started 12-12 from seed and introduced nutrients week 4. I had a grow tent next to this one housing 4 plants fighting root rot. Towards the back end "Pinky" here was fighting it as well. DWC...I'm Fucking done and unless YOU have a chiller and or don't heat your home, I wouldn't recommend it. Next grow...soil. Total Dry Weight pulled...less than 21 grams. I couldn't believe the shrinkage when it came to hanging and drying. I'm glad that experience is out of the way...NEXT.
Likes
199
Share
The pool just got 1 more guest Strawberry Lemonade. I don't know if I mentioned it but we added Moon Walker Kush last week. Slurricane is finally semi happy, really she has been a pain in the ass. I had to drill a hole in her Dutch bucket, I think she is allergic to water..... really she has been a ball buster. Gorilla Zkittles is almost black. She looks Beautiful.... Shiskaberry and Blue Gelato 41 are coming along nicely.
Likes
11
Share
@Ninjabuds
Follow
It's a nice change of pace to have these warmer temperatures, even if it's not quite spring yet. Low 40s during the day is a lot more comfortable than what we've been dealing with lately. Hopefully, this is a sign that spring's around the corner. My Blackberry Moon Rocks are growing like crazy! Most of the leaves are a nice, deep green, but I noticed a few on one plant were a little yellow. I did some research and it sounds like they need some extra nutrients, so I'll be adding those in on the next watering. I can't wait to see how much bigger and bushier these beauties get.
Likes
144
Share
@roro_204
Follow
I pumped up the bloom nutrients a little. As it’s my last week before I go into the flower stage. My lights will go 12/ 12 shortly. I added a wooden support system because the plant was slanted a little bit. I also removed clones yesterday. And the plant is healing very very well and fast. Lots of new baby nodes growing! took out the strongest two plants to keep as mother plants. And I continued LST as the plant keeps growing steadily!
Likes
21
Share
@guerilla
Follow
I missed a week in diary.. Starting to show brown hairs now. Peace! 💚
Likes
7
Share
@Messypies
Follow
Apologies for the lack of update. Personal life things.... Anyway. 3 plants on the road to harvest. Checking trichomes daily and so far clear. Buds are starting to swell. I managed to rectify the defficiency (,a little too late) but better than never ! Yeilds won't be great. Not sure about potency yet however as its my first grow, I'm quite proud to say the least :)
Likes
11
Share
Plant growth is amazing!. I really love royal queen seeds. The plant is very healty and strong. I am using organic nutrition from biobizz and plagron lightmix as soil. All together they are worling really well. Looks like this Matanuska plant is going to be a very bulky plant. Looking foward to finish the grow
Likes
19
Share
Week 8, Things smell heavy🤤 Watered NL's 2L with 0.5ml/L Bloom and 3ml/L Topmax. Sb1 got 2L with 0.5ml/L AlgAMix, 0.5ml/L Bloom and 0.3ml/L Grow. Sb2 got 1.5L same Bloom and AlgAMix. (Day 50) Checked NL 1, give her about 6 days to harvest. Ph was to low on her, did too much Training and bad Environment. Learnd very much, thank you little buddy Waterd NL's 1.5L Water (PH 6.5) Sb got also 1.5L but with 0.5ml/L alg and topmax ( Day 52) very worried about SB 2 Flushed her today, should do this earlyer runoff ph was about 5 Sticky Beast back on track lets call her 👌‍♂️ NL'S trichomes getting more milky, not so far from yielding✂️ (Day 56) gave both Northern lights 1500ml and Sticky beast#1 1000ml Water. Ready for week 9? (Day 57)
Likes
Comments
Share
@Antarctic
Follow
🌸 Week 3 Flower — Bud stacking begins! 🌸 This week was a turning point — stretch finally slowed down and the plants are now fully focusing on bud formation. The tent started getting really humid due to the extra leaf mass and transpiration 🌿💦. That’s when I realized: a dehumidifier is a must. Without it, RH would climb over 70%, which is dangerous at this stage. Temperatures are still steady (27°C day / 20°C night), but now I’m working on dropping humidity to ~55–60% for safer flowering. Nutrient-wise, I reduced nitrogen even more, focusing on PK boosters and bloom nutrients. Bud sites are stacking nicely, pistils are shooting everywhere 🧡, and the first serious trichome production has started ✨. Mistakes from earlier (too much IR, uneven light distribution) are still visible on some plants, but overall the crop is healthy and vigorous. Next week should be the start of real frost explosion ❄️.
Likes
31
Share
@MrRaid
Follow
Hello everyone had to add more calmag for these ladies as they shown me that they really want it. Accept from that they have been doing extremely well they have abit more room now I've taken out the BlackBerry kush I'm hoping for a very stinky sticky harvest with lots of good smells at first the plants seems to be very picky with nutrient strength now I would say they want as much as they can possibly take showing in there leafs that they demand more calmag iron and magnesium I have givent hem this today 42 day from seed I think now the plant will concentrate on filling out those bud sights from day 60 I'm gonna lower the temperature on the room from 24 to 21 and humidity around 45% maybe 40 gonna lower the temperature of my flush water from 21 to 18c
Likes
5
Share
@Gancha420
Follow
look a little weak and i find some fruit flies in the soil and i guess one of reason of they grow stop for couple days. 😘
Likes
3
Share
@skipakz
Follow
Eine Pflanze Mitte der 11. Woche teilweise weggeschnitten (Pflnaze hing in der Blüte stark hinterher, war seit Steckling heller als alle anderen trotz gleichem cut, sah ungesund aus, wenig trichombildung etc. - man siehts auf manchen Bildern an den Blättern) so kann ich den freigeschnittenen Platz für untere Triebe nutzen… seit letzter Woche nun Athena PK und Calmag dran. Habe nochmal ordentlich entlaubt + nutzlose Blüten weggeschnitten das die unteren Triebe nochmal richtig Gas geben können.
Likes
14
Share
FOR EVERYTHING MARS HYDRO VISIT: www.mars-hydro.com www.marshydroled.ca PROMO CODE: rocknroll VISIT THE ALIEXPRESS STORE: @marshydro_aliexpress Instagram: @marshydropenny https://youtube.com/channel/UChU5ZWwNi-DvnO3oWVU3ceA Thanks for taking the time to read and check out my diary🤜🤛 FC-E6500 LED GROW LIGHT: FC-E6500 grow light with 3978pcs OSRAM BridgeLux Diodes & Moso Driver, market-leading PPF 2.7 µmol/J, Max 2.5g yield/watt with 30% higher Average PPE, more cost-effective when compared to same style type lights. Only consumes 650W, perfectly cover 5x5ft (personal), 4x4ft (commercial) grow space. Innovative Precise Uniform Lighting-Built-in removable bars interval & dimmability enable the exact & dynamic PPFD control over each of the plant growing stages, FC-E6500 detachable bars deliverSuperior Heat Dissipation: Real Aluminum heatsink together with 6 slim profile passive cooled bars (THINNER & LARGER surface) and detachable Meanwell Driver, create less heat. save 50% hydro than other old grow lights! Driver can be mounted remotely on the side of a grow tent/rack or on an adjacent wall to remove heat from grow space. Full Spectrum UV IR LED: With Yield Max spectrum (660nm Osram enhanced Deep Red,2800k-5000k,730-740nm IR,380-410nm UV LEDs), Average PPFD the FC-E6500 LED grow lamp enables cultivators to produce BIG FAT Dense Buds, perfect for full-cycle hydroponic, soil, grow tent/grow room. Dimmable Commercial Grow Light: Cost-efficient, easy dimming & daisy chain With a max up to 20 lights, IP65 Waterproof, master light easily controls the rest. Perfect for commercial & home horticulture. FC4800 LED GROW LIGHT: GET THE MAX FROM MARS👍: Welcome one of  the newest members of the Mars Hydro family🤜🤛🤘. The Mars Hydro FC 4800 480W LED Grow Light can accommodate up to a 4' x 4' area for flowering. It has OVER 2000 LED chips consisting of the best selling Samsung LM301B diodes which has a Luminous Efficacy of: 220 lm/W 0.2 W, 3 V mid power, Osram 660nm Diodes, Infrared light and UV LIGHT👍. It boasts the incredible efficiency of 2.8 µmol/J, maximum 2.5gram yield per watt with 30% higher Average PPFD. This High-intensity spectrum is beneficial for plants at all stages - from veg to bloom, and creates Big dense Buds👍. achieve 50% higher yields & quality compared with the old lights! Only consumes 480W for 4x4ft personal grows, and 3x3ft for commerical grow. It comes with a dimmer and daisy chain function with a  maximum of up to 15 lights, the master light controls the rest👍. Wide 6-bar design offers even & wide canopy coverage and can maximizes your grow space. slim 180° FOLDABLE DESIGN... YES I SAID FOLDABLE🤘🤣 , making it compact and easy to install, it's IP65 WATERPROOF and will give you no worries while growing in a humid environment and makes it a flexible high performance commercial grow light for enormous  SUPER FROSTY yields.😛😛😛. MARS GETS EM FROSTY BOYS👍 AWESOME HEAT DISSIPATION: The Low energy consumption FC4800 growing light has 6 passive-cooled bars and an aluminum heat-sink a removable driver  you can upgrade later or have it outside your tent. with zero noise  you can save up to 50% in your electricity bill compared to HID's or HPS lights! It also has a removable driver so you can upgrade it in the future or have it outside your grow space for better heat control in your growroom👍 UPGRADED FULL SPECTRUM: Yield Max Spectrum with enhanced red (Top-Bin Samsung 3000k-5000knm, Osram 660nm Deep Red), speed up blooming & fruiting, perfectly suited for full-cycle growing. The FC4800 LED grow lamp was born for Big Buds, perfect for commercial, grow tent, grow room, hydroponics, and all soil grows.👍 THE BEST SAMSUNG DIODES: THE FC4800 has Top Bin genuine Samsung Osram Diodes, combined with remarkable 2.8 µmol/J Efficacy, 30% higher Average PPFD, 50% less energy consumption, to maximize your yields. They give you a TRUSTED 3 years warranty 100% Satisfactory guaranteed!!! TSW2000 LED GROW LIGHT: INCREASE YIELD AND CROP QUALITY WITH MARS HYDRO LED GROW LIGHTS: NEWEST SMD LED technology provides the highest PAR/LUMEN output (1122umol@18") and can make you get 30% higher yield compared to OLD blurple led lights.  Max 2.5g yield per wattage and achieve maximum quality and quantity, much better than traditional HPS grow systems LOW ENERGY CONSUMPTION LED GROW LIGHT: Consuming only 300W true output with 684 LEDS! It saves up to 50% energy than other led grow lights. Perfect for 3.5x3.5ft bloom stage, 4x4ft veg stage. Over 90% light energy can be absorbed by plants, it will have higher intensity in a MARS HYDRO grow tent with diamond design mylar, or by crossing over using multiple TSW2000 HIGH EFFICIENCY FULL SPECTRUM INDOOR GROW: 3000K 5000K and IR 660nm 760nm RED, makes it close to natural light, highly engineered to provide improved growing performance for plants at all stages of growing, rapid plant response from seed to flower; Uniform and wide-beam light distribution for your plant's optimal growth 8x8 1680D GROW TENT The MARS HYDRO 8x8 Grow Tent interior is made of a unique diamond design mylar which is highly reflective. (Other companies mylar and reflective rate is as low as 50%, and it won't provide efficient light. They use thick 1680D oxford canvas, and being double stitched, it is tear proof and perfect for locking in the light. Their grow tent keeps 100% of the light inside the tent and helps your plants absorb more light. EXTRA-THICK material means No light leaks or rips at all.👍 Strong Stable metal corner adapters and poles are the trustful supporters of the tent. It's very sturdy, neither rusting or paint flaking off. quick and easy tool-free setup. They use heavy-duty metal zippers, with double layer black lining, by far the best on the market which creates a light-proof seal. The Easy observation windows are made by double layers of cloth. Observe the growing conditions of your plants without opening the tent and avoid disturbing your plants. The observation windows also serves to dissipate heat and ventilate the air. The tent includes 2 removable waterproof floor trays to hold soil and water. The removable tray can be taken out to wash easily. They guarantee the grow tents are easy to install even if you've never done something like this before. Clear Instructions and no tools needed! They also offer 30-day unconditional refunds for quality problems. Just contact their friendly 24 hours customer service 👍 (NEW) STRIVE NUTRIENTS 💪