Likes
Comments
Share
Final Report: Grow: The plants has grown very beautiful and healty without pests and diseases. They grown bushy and with medium height during the vegetative stage. I had try to use LST in third veg week but i did't made correctly and after that i dicided to return to grown normally without any particolar tecnique. I used a littel more fertilizer then mine usual and that made the plants grown fast without any problem. In the first two weeks of flowering stage the plants started grow taller and the number of the branches increase, in this phase i only defoliated when the fan leaves turn yellow in late stage. Form the start to the end the flowers grown dense and bigger every day and this time i waited until almost all of them were mature before harvest the plants. I changed the plants from one grow room to another(in the sixth week) when they became too high and they couldn't stay more in the smaller grow box(nothing changed in the enviroment between the two boxes). Equipment and grow box: The enviorment of grow box has been optimized every stage with the right temperature, umidity and air flow. Vegetative temp/umidity --> 23-29 °C/45-55% Flowering temp/umidity --> 20-26 °C/40-50% The air flow was created by two pc fans and one big fan. Harvest: This time i harvest a big numeber of beautifull dense buds and i just discarde only few fluffy buds in the lower branches. The result of this grow is amezing compared to my old expiriences. I harvested the flower and i made a fast curing process after i washed the crop and i let them to dry with a fan on it. After five days a take the branches which were to dry and i did the final trimmig before put all the harvest in a open jar for finishing to dry. I collected all the leaves, fluffy buds and trimming scraps in a bag and i let them dry. Later i put the bag in the freezer and when i collect and dried all the scraps from OG Kush and Dandoverde Haze i did some Ice-O-Lator hash. I used 250g of trimming stuff and i made 11.50 g of hash, I had use a set of 5 bag and i take the resin from the 160µ - 120µ - 73µ- 25µ bags. I pressed all the resin in a great block of tasty strong hash. Always better every time 😊💪 Total harvest ---> 90g only of dense buds and 11.50g of hash.
Likes
4
Share
Somehow I miscalculated the days and started week 6 prematurely. I will just continue here thru to week 7 Day 32 From Seed NYD#2 Started LST. Pot was light, watered at 6.3 including Fish Sh!t. NYD#3 The pony tail backfired. The main is mangled. Despite small nodes, I started LST and watered at 6.3 including Fish Sh!t. Day 33 From Seed Did some research and found out the ponytail should only be used during the light cycle and removed for the dark period. I left it on, which caused the ugly. Lesson learned! Day34 Adjusted and added LST. Watered #2 at 6.5. #3 was still heavy, no water needed. Day 37 Watered, adjusted LST Day 39 From Seed Watered, adjusted LST. Found a bug that isn't a fungus gnats (NYD#3). Inspected both plants for more. Did a neem oil top drench and added Vicks Vapor Rub to the pot rims (bug deterrent). So raised light roughly 4 inches. Day 41 Light watering, adjusted LST ties, top drenched with Neem Oil. Added a few ounces of peroxide to the humidifier. They'll both need a top dress soon.
Likes
96
Share
Greetings, fellow cultivators! Today, I'm thrilled to share the grand finale of our journey with the remarkable Big Cheese Auto from Seeds Mafia. At day 81 from seed, she reached the pinnacle of her splendor, and the harvest was nothing short of spectacular. As I gently snipped each ripe bud, I couldn't help but marvel at the beauty and resilience of our Big Cheese Auto. From the moment she emerged as a seedling, she embodied strength, vigor, and an unwavering determination to flourish. Now, as she hangs upside down to dry for the next two weeks, I'm filled with a profound sense of gratitude for the privilege of witnessing her growth. Our journey with the Big Cheese Auto has been nothing short of extraordinary. From the excitement of germination to the meticulous care during vegetative growth, from the anticipation of flowering to the aromatic crescendo of the harvest, each phase has been a testament to the plant's resilience and the joy of cultivation. The journey began with a tiny seed, a promise of potential waiting to be fulfilled. With the nurturing support of the Autopot system and the guidance of Aptus Holland's nutrients, our Big Cheese Auto thrived, transforming into a botanical marvel with each passing week. From the emergence of her first true leaves to the explosion of trichome-rich buds, she captivated us at every turn. A heartfelt thank you to Seeds Mafia for providing the genetics that sparked this incredible journey. Your seeds have not only produced exceptional plants but have also inspired a community of passionate cultivators. Your dedication to quality and innovation is truly commendable, and I am grateful for the opportunity to cultivate such remarkable genetics. Before the trimming and curing process begins, I took the time to capture the beauty of our Big Cheese Auto in a special photo shoot. Each snapshot is a testament to her magnificence, a visual ode to the journey we've shared together. To the entire community, both near and far, thank you for accompanying me on this horticultural odyssey. Your support, encouragement, and shared passion for cultivation have made this journey all the more rewarding. Let's continue to cultivate greatness together! Thank you for being a part of this incredible journey! Wishing you all abundant harvests and joyful cultivation endeavors ahead! Genetics -Seeds Mafia Big Cheese Automatic Light - LUMATEK ZEUS 465 COMPACT PRO 
Food - APTUS HOLLAND 
 
All info and full product details can be find in can find @ https://seedsmafia.com 

https://aptus-holland.com/
 

https://lumatek-lighting.com/ As always, thank you all for joining me on this journey, for your love, and for it all. My horticultural odyssey would never be the same without you. Your love and support are cherished, and I feel both honored and blessed to have you in my life
Likes
4
Share
Second week of flower and I defoliated again. There are small bud sites starting to form at the end of week two flower. The apple fritter has fascination which is making the stems grow interestingly with lots of bud sites.
Likes
10
Share
@Unnamed
Follow
Chopped her on day 83 from sprout. Discovered some Bananas on Christmas, the plant looked due anyway so no worries, wanted to chop her anyway, guess I was right with the timing and the plant showed me it is done and did a last attempt to pollinate itself, normal behavior in my opinion, also the Bananas were blanks, didn't see any pollen. Overall great strain, will use this strain to test the limits of the prototype of my new hydro system. No mold or anything, vigorous growth, easy to train, stems did bend and not snap but are stiff enough to hold their weight. Buds are very dense, some might think the buds are a little small but there are a lot of them, good sizes in my opinion, perfect little ready to take with you buds. Even the buds are the bottom are dense, I had lights at the bottom but even inside the canopy with little light they are dense! Plant turned purple wherever there was intense light on it, visible on the short clip I took of a top branch where below the bud where there is shadow from the bud above is the branch is green and a little lower where light reaches it turned purple. This purpeling in my opinion is a great and normal feature in plants overall, probably do not expect a purple plant unless you go with intense lightning and high CO2 values to handle it. 9/10 because it hermed at the very end, didn't hurt the result because the plant was done but it would be nice if it wouldn't do it to maybe let it go some more and trade THC for more CBN and even more yield, total yield is good as it is but more is always better :) Whoever reads this at the very bottom... I hope this diary helps you out for your next grow. I hope this diary also shows that fertilizer brands are more marketing than anything, my fertilizer costs me ~ 1/5 compared to Canna, Plagron etc. etc. and it works great. Yara is used for example by Demecan a medical Cannabis producers, if they use it why not you? This is no advertisement for Yara, use Haifa or whatever just maybe don't buy overpriced fertilizer with big marketing and rather put that saved money in good quality genetic seeds. If you've got any tips, ideas, questions or whatever please leave a comment :) Update: added some pictures of roots after I harvested my other plant for obvious reasons, had to saw of the Net Cup because I did not manage to remove it, to many roots. Update: dried weight is 320g total, smoked a little besides that so maybe 330? didn't count how much so I didn't add that to the total, but it was a little more. Tastes like Wrigley's Spearmint gum! Will definitely grow this one again, so far my #1 from what I've grown, just dense, frosty and good tasting, can't really complain. 🙏 In case anyone from Mephisto reads this, make this a permanently available Strain 🙏
Likes
33
Share
@bildo
Follow
This was my first ever grow and I am extremely proud of it. The nugs are dense and smell fantastic. The phenotypes on each of my plants were very unique, and each has its own smell. This did make it a little harder to care for the plants, but it ended up working out fine. I opted for a dry trim and did a tight manicure on the nugs. I plan on turning the trim into cannabutter using a sous vide machine.
Likes
20
Share
@DrGanj
Follow
Bit disappointed with the phenotype.
Likes
4
Share
@GroloCup
Follow
She's blown up and smells like grape kool aid mix poured into a cup of gasoline. Then look at that deep purple. Brother Geoff's selection is definitely a thing of beauty.We're adding some green sensation to the nutes and sticking to this autoflower feed and training schedule for the small tent I've put together that's really given me consistently quality harvests in limited space. Here's to another week of growth and flower development!
Likes
30
Share
@Stick
Follow
They are growing fast! Damn I was not ready for this and I did wait too long to proceed to LST. I broke one of the main stems on OG_2, shit happens...lesson learned. Still, very happy with these babies, 28 days old now.
Likes
6
Share
Esta semana he terminado con los trasplantes de una de las mesas completa. He regado las que no están trasplantadas con un total de 20L de agua + Bio Rhizotonic + Bio Vega, para que aguanten hasta que les llegue la hora del trasplante. También he tratado todo el cultivo, con Propolix diluido en agua y pulverizado sobre las plantas justo antes de que se apaguen los focos, de esta forma evitamos quemaduras en las hojas y le damos una protección extra contra diferentes patógenos. Las trasplantadas las riego solo con agua + Bio Rhizotonic.
Likes
20
Share
@Robin87
Follow
Second week of flower done, the kids have shot up, pretty much doubled in size so far, plants well into stretch mode, nice top feed of Bat shit and Dr organics secret sauce! Lovely shades of green amongst the canopy, same again, no training or defoliation, and that’s hopefully the way it stops throughout the grow, untill next time
Likes
24
Share
Another banger by @divineseeds make sure your following them on Instagram awesome company awesome genetics top service and some top fire strains Thank you Divine seeds for this opportunity its been great and hopefully be doing work with you guys all the time now
Likes
19
Share
@RFarm21
Follow
28 Janeiro- Harvest day!! Atualização em breve. Esta strain demorou 114 dias, mais ao menos.
Likes
9
Share
@MMVSS
Follow
Isn't She Cute! Well I Still Don't Know If It's A Girl But Here's Hoping! 🤞🍀 Glad This Is Working So Far Another Couple Weeks Three To Four Nodes Deep, A Topping And Then We Will Flip! We Got A Ways To Go! WISH ME LUCK! 🤞
Likes
6
Share
@nonick123
Follow
Día 30 (10/06) Sigue creciendo. Tendrá un tamaño medio me parece Día 31 (11/06) Sigue el stretch y empieza a florecer Día 32 (12/06) Come on! Tendremos una planta más o menos decente Las Autos deben germinar en Light Mix antes de que las raíces lleguen al Super Soil! (30% Light Mix - 70% SuperSoil) Día 33 (13/06) Sigue creciendo Día 34 (14/06) Riego 150 ml de H20 pH 6,5 Día 35 (15/06) Se ha quedado una planta de tamaño medio. Algo saldrá Día 36 (16/06) 500 ml de Té de Floración con Healthy Harvest 8 ml/L + Insect Frass 16 ml/L + Melaza 1 ml/L 💦Nutrients by Lurpe Solutions - www.lurpenaturalsolutions.com 🌱Substrate PRO-MIX HP BACILLUS + MYCORRHIZAE - www.pthorticulture.com/en/products/pro-mix-hp-biostimulant-plus-mycorrhizae
Likes
19
Share
the girls are now in my backyard, they are in a 1.5 x 1.2m terrace completely amended by @elcaudilloorganicproducts Pheno B Is still veg
Likes
11
Share
@tangie
Follow
Chopped her two days into week 14. What else. Buds. There are a lot of them. And they are quite large. And they look like they will require little effort to trim. What more can I wish for? I am a very happy man. Upd 1: Trimming is SO SIMPLE! Not much sticking out to begin with, because of the amazing bud structure and me plucking most bud node fans. Solid nugs which are not bothered by anything, so pulling smaller sub-bud fans is very simple too, while the buds are what I would call moist. I'll call this Moist Trim 😄 ✂️✂️✂️ Went for the best trimming tools available on the market (well at least my research concluded so) and LOVING every minute of trimming with the B-500SRF. Why would I or anyone else use something less suitable or less comfortable for such a delicate and long job is beyond me, except if you cannot afford one right now, in which case I wish you to experience it one day. Fiskars are also very good in therms of the blades, coating and cutting ability and precision, but the spring is just too stiff, like way, way to stiff for something that is to be used for hours on end. One might argue that such spring force helps overcome resin buildup, but please just rinse your instrument regularly in an appropriate solvent (ethy, iso, whatever — consider you instrument materials as well) and wipe it after. Why would you let significant amounts of resin to accumulate on such a gentle and precise tool? Kinda defeats the purpose?