Likes
Comments
Share
@PapaTerps
Follow
Potion - Wizard Trees Day 101 🚿 She has been watered every second day this week, each time with 2L of RO tap water, with defined nutrients, mixed individually in order and then pH'd to 6.5. ✂️ I've removed a couple of larger sugar leaves from around the flowers at the top canopy to improve light penetration, and just the usual inspections 👌🏻 🌸 She is at week 6 of bloom and she is working hard on bulking her flower! As she enters the latter stages of her flowering phase, her fan leaves have taken on a deep purple colour and her pistils have began to fade to amber 🍂 Her aroma has also started to fill the tent with notes of herbs and sweetness! Very autumnal!
Likes
7
Share
This week marked the transition into flowering as the light cycle was switched to 12/12, officially initiating bloom 🌸 For the first few days both plants continued normal vegetative growth. The stretch became noticeable after about 3 days, marking the beginning of the flowering phase. • Height approx. ~65 cm • Both plants taller than the Jelly Donutz • Early stretch phase beginning Light intensity was increased to ~750 PPFD ☀️ Clear phenotypic differences continue to develop: • Pheno #2 shows a thicker main stem and stronger vertical growth, with branches staying closer to the main stem • Pheno #1 grows more open and spreads more evenly in all directions Water demand differs slightly between the two: • Pheno #2 watered every 2 days • Pheno #1 watered every 2–3 days 💧 Feeding this week: • 1x BioTabs Bio PK • Otherwise water + BioBizz CalMag Environment remained stable: • 25°C temperature • ~60% RH 🌡️ Very few to no visible white pistils yet, which is normal this early after the flip. The plants are still transitioning hormonally and focusing on stretch before full flower development. Overall a smooth and controlled start into bloom, with stretch beginning and clear structural differences between the phenotypes ?🔥
Likes
8
Share
Frostbanger really impressed me; I think you can clearly see the Gorilla Cookies cross. I would love to grow this strain again and again.
Likes
4
Share
📆 Semana 10 Recta final bien definida, con cogollos completamente compactos, muy duros y cargados de resina. La planta empieza a mostrar ligeras tonalidades que acompañan la maduración, manteniendo una apariencia muy resinosa y brillante. Los tricomas se sitúan en un equilibrio entre lechosos y ámbar, avanzando progresivamente hacia un punto óptimo de corte en las próximas dos semanas. El aroma se intensifica y gana profundidad, marcando un perfil cada vez más cerrado y reconocible. La actividad de la planta es mínima, enfocada únicamente en el acabado final, mientras se acentúan los signos de consumo de reservas en hojas grandes. Cultivo estable, afinado y entrando en la fase decisiva. Seguimos creciendo fuerte 💪!
Likes
2
Share
📆 Semana 6 Durante esta sexta semana de floración, los cogollos continúan aumentando de volumen y densidad, manteniendo una evolución uniforme y un buen estado general. La planta sigue aprovechando muy bien el sol directo. ⚡ EC: 1.1 💧 pH: 6.2 🌡️ Agua: 21°C 🌫️ Humedad: 45 - 55% 💡 Intensidad: Luz directa del sol 🌱 Aporte nutricional: Se mantiene una EC de 1.1 con Silica Force, Sugar Shot, Sticky Fingers y Bloom Booster, acompañando el avance de la floración. 🔥 Nota de cultivo: Los cogollos siguen ganando tamaño y definición, avanzando progresivamente hacia la maduración. Seguimos creciendo fuerte 💪!
Likes
16
Share
@EazyRider
Follow
I just took down the rest of the Grape Deebo harvested last week, this is the red Deebo with green stems. The other one looks like it might have another week. I have taken off one stem as a control So enjoy some bud pr0n.
Processing
Likes
93
Share
Welcome to Zamnesia Spring Cup 🏆 Hey everyone 😊. A nice week starts before the harvest 😍👌. It smells incredibly delicious and looks beautiful. . You can see from the leaves that they suck their last energy out of the leaves 😉. There will be an update before the harvest 🙃, until then I wish you all a good start into the new week, stay healthy 🙏🏻 and let it grow 🍀🌱 You can buy this Strain and Nutrients at : www.Zamnesia.com Typ: Sour Diesel (Zamnesia) Zamnesia Spring Cup 🏆🏆🏆 Type: Runtz ☝️🏼 Genetics: Zkittlez x Gelato 👍 Vega lamp: 2 x Todogrow Led Quantum Board 100 W 💡 Bloom Lamp : 2 x Todogrow Led Cxb 3590 COB 3500 K 205 W 💡💡☝️🏼 Soil : Canna Bio ☝️🏼 Nutrients : Monster Bud Mix ☝️🏼🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 - 6.3 💦💧
Likes
7
Share
@Meksi2790
Follow
week 4 plants look nice slight nitrogen def pumped up the dosage on the nutes
Likes
16
Share
A cutting requires roots to uptake water, we must create an environment so humid the plant can absorb moisture through its one set of leaves, 70+RH% but also a good supply of fresh air and full temperature control. Once I see light lime green it will signify new growth of the plant, I will know it has started to re-root.
Likes
4
Share
@Ale1000
Follow
Creció como un real elefante , grotesca . Sin ir más lejos unas de las autos con mejor rendimiento
Likes
202
Share
Hello 👋 👋 👋 As a 29th day arrived inside the tent there are many changes 😇 💪 🙏 Purple and Cinderella start flowering a week before Bruce Banner but all girls have got similar high 😇 💪 🙏 63 cm was taken from B.B 😁 All of my beauties expanding in size, flowers sites start to taking a mass and density. Some brown spots shows on humidity effected leafs so I removed them to control a healthy conditions 💪 💪 💪 Update: Day 30 Ladies definitely goes in flowering stage, every day I can observe a massive size and high changes. It's look like the tent will be full of buds soon. I'm very happy to see a purple colour on my Purple Lemonade. I'm excited because this is my first purple strain 😇 🙏 😇 Day 32 I have to move a girls a little to adjust them for better space use. I love to look on them 😍 Spec. Mars-Hydro TSW2000 100% power RAM mix flow 199m3/h Humidity 58% - 65% Have a fantastic day, You Lovely Girls Growers 😇 😇 😇
Likes
1
Share
aktuell in der letzten phase 4 wochen fermentieren
Likes
22
Share
@715creeks
Follow
First grow using Fast Buds seeds, really looking forward to seeing this one for myself
Likes
92
Share
Week 3: TrolMaster Chronicles – Transplanting, Growing Strong, and Thriving in PRO-MIX HP 🌱✨ Hey Grow Fam! Another exciting week has flown by in the grow room, and I’m thrilled with the progress! We kicked off Week 3 with our first set of transplants. The Gorilla Melon was transplanted at the end of the week, while the Papaya Zoap is still patiently waiting for its turn to shine. Each plant that’s been transplanted is now comfortably settled in 15-liter Autopots, filled with PRO-MIX HP BIOFUNGICIDE + MYCORRHIZAE, and wow, I’m loving this mix! 🌱 Why PRO-MIX HP is a Game-Changer For those of you unfamiliar with PRO-MIX HP, let’s take a closer look. This soil provides superior drainage and aeration, thanks to its high porosity. The addition of fibrous peat moss and coarse perlite creates an ideal environment for water flexibility. It’s been perfect for the girls as they transition into their final homes. Plus, the biofungicide and mycorrhizae are doing wonders for root development, giving them all the support they need for vigorous growth. The plants are showing off a beautiful, vibrant green, each with its own unique characteristics—no two plants are the same, and I love that! 🌡️ Environment Update: Temps, RH, and More Let’s talk about the conditions the girls are thriving in! We’re sitting at: • Temperature: 26.7°C • Relative Humidity: 62.9% • VPD: 1.30 (I know it’s a bit high, but they’re handling it like champs) • CO2: 800 ppm • pH: 6.18 • TDS: 215 ppm • Solution Temperature: 23.2°C To make things even more efficient, I’ve adjusted the light height, keeping the PPFD around 360 to 400 to save on energy. These beauties are still soaking in the light perfectly, and I couldn’t be happier with how they’re responding. 💧 Watering and Feeding At this stage, the plants are thriving with just enough nutrients to keep them happy. I’ve kept things simple with a balanced solution, ensuring everything stays within the perfect range. The PRO-MIX HP, with its mycorrhizal fungi, is really helping with nutrient uptake and boosting overall health. It’s amazing to see how quickly they’ve adapted! 🌟 Transplants Complete – Progress Feels Incredible! I’m super excited with how everything is shaping up! Most of the transplants went smoothly, and the growth we’re seeing is just amazing. The Papaya Zoap is still waiting for its final move, but it’s growing strong, getting ready for the next step. It’s an honor to work with these genetics—they’re each unique, yet all thriving in their own way. 🌱💚 🌍 Shoutouts and What’s Coming Next I couldn’t do this without the support of my amazing sponsors and all of you, Grow Fam! A huge shoutout to TrolMaster and Aptus Holland for their top-notch gear and nutrients, and of course, to all my followers—whether you’ve been here from the start or are new to the journey, thank you for the love and support! 💚🙏 Don’t forget to check out my Instagram and YouTube, where the Seed to Harvest Series just kicked off! I’m going deep into all the gear, techniques, and day-to-day grow updates you see here. Exclusive content and more are waiting for you on those platforms, so come by and join the fun! Growers Love to everyone, and here’s to another epic week of growth! 💚🌱 Let’s keep pushing the limits and making magic happen. • Nutrition: @aptusholland @aptus_world @aptus_es @aptusbrasil @aptus_thailand @aptus_portugal @aptususa_official @aptusplanttechnz @aptusplanttechaus • Controls: @trolmaster.eu @trolmaster.eu.support @trolmaster.support @trolmaster.agro • Soil: @promix_growers_eur @promix_cannabis @promixmitch P.S. Let’s talk about these new Model One LED bars I’m running. 🌿💡 They’re not just any lights—these are full-spectrum beasts designed to give my plants exactly what they need at every stage of growth. The real magic, though? The dimming feature. With just a quick adjustment, I can dial down the intensity without sacrificing the quality of the light. This means I’m saving on energy costs while still delivering top-tier PAR and maintaining a balanced spectrum. It’s not just about blasting plants with light; it’s about giving them the right light at the right time. By fine-tuning the PPFD (Photosynthetic Photon Flux Density), I’m hitting that sweet spot where the plants thrive, and I don’t have to run the LEDs at full power. So, while I save a bit on electricity, my plants still get the perfect environment to reach their full potential. 🌱✨ This level of control lets me optimize the growth, and trust me, my plants are loving it—just another reason I’m thrilled with the Model One setup. 💚💚💚 Growers Love everyone 💚💚💚
Likes
2
Share
This baby seems to be going into the first stages of flower. Ill know first sure next week. Will post updates soon.
Likes
109
Share
Our most infamous strain with the stickiest buds in the game. A knockout artist who boasts a staggering 24% THC. Very big and potent. The “glue” comes from so much resin, that your fingers will literally be stuck together while trimming. A large-sized plant that only needs around 9 weeks to reward growers with big enormous sticky fat buds, that any type of grower will fall in love with. Super easy to grow and her pine and diesel terp profile will impress even the most experienced cannabis connoisseur. She is well suited for beginner growers and hash makers should not miss out on this trichome queen. Bud descriptionGorilla Glue Auto’s buds will be chunky and dense, with a heavy resin production that causes your fingers to stick together like super glue. The buds are dark green, with swollen pointy calyx that swell wrapped in bright orange hairs. A truly impressive amount of trichomes that would make excellent cup winning extracts hands down.Smoke reportShe is one for smokers with the highest tolerances and fans of powerful hybrids. Gorilla Glue Auto is extremely potent and her effects are not for the light-hearted. Not only will she glue you to the nearest armchair, your eyes and face will slowly feel the force of her physical effects while you enjoy a nice head high that will keep you deeply motivated and energized. Certainly a perfect choice for staying at home and lounging out with friends or relieving stress and pain while maintaining an uplifted spirit that allows you to continue with your day-to-day chores.Plant AppearanceThis lady likes to stay low and will usually grow to a height of 60-130cm, making her ideal for keeping out of sight. She does not require much maintenance and will reward you with massive yields of up to 450-600gr/m2. Her growth structure is short and bushy, thanks to her sativa dominance, and will grow one main central cola, with fat side branches all around. Once flowering starts, expect Gorilla Glue Auto to fill out thick and fast, as she begins to pack on size, weight and go crazy with the trichome output. From seed to harvest she is ready in 9-10 weeks, where she will finish with a short and fat appearance.
Likes
29
Share
@Hashy
Follow
📋Comment I do like this strain, I wouldn't have joined this competition if I didn't like it. 📋 Data Seed to havest=105 days. Veg time=28 days. Flower time=77 days. Wet weight=609g Dry weight=g 📋 Smoke report Not dried yet but I'd imagine it's just like the other Runtz I have grown. 📋Grow stats for GDG 23 #1 Runtz=g #2 Fat Bastard=g Total=g Lights on. 20hrs×7days=140hrs 18hrs×21days=378hrs 12hrs×77days=924hrs Total hours=1442hrs Light power=147.73Kw Rad power=105.69Kw Extractor=34.12Kw 4 gang=47.02Kw Top fan=17.72Kw Total electricity=352.28KW Electricity cost @£0.25/Kw=£88.07 Average light power a day=1.4Kw Average watt per hour=102w g/watt=(÷)=g/w £/g=£/g 📋Final word. This diary isn't finished. I'm just trying to complete as much as possible to have a better chance at the Eternity competition. I will be updating it when I have dried the grow. Back soon. Take it easy. ********************************************
Likes
1
Share
@tigerbomb
Follow
il ramo secondario piu esterno è anche quello piu cresciuto, è gia quasi al limite di altezza non so se continua cosi dovrò finire per topparlo o rischio che sia troppo vicino alla lampada ma se cosi fosse, quando sarebbe l'ideale topparlo? siamo gia in fioritura stresserei la pianta e rallenterebbe lo sviluppo, non so