11/10/2025 18:45 Everything good this week,full of Sunny days and temperature raised to 22°C during days and 12 °C during nights Plants are enjoying this climate even with cold nights,they will not be so big at the end but the quality Is on point #1 Coco Milk 84 days from seed This one has small buds pretty dense but glistering in resin ,the top nugs are greasy at the touch leaving the fingers sticky and smelly Didn't check the trichomes but they look like there Is some amber,the smell is super strong telling the finish Is near maybe earlier than i expected Brought a friend with me who has grown much more plants than me,also he tells the smell and the look are amazing,the flavour is fresh,deep,complex to describe I say it's like a good shampoo flavour when you enter in a barber shop not so pungent but creamy like a coconut milk exactly as the name says,AWESOME!!! There are some spider nets i think there will be some problems if this situation keeps going like this #2 and #3 Coco fresh 72 days from seed This plant keeps going fast even with cold climate,the buds are really fattening a lot and so dense Resin production Is not on point by now but It has to consider the late start of flowering,this plant Is blooming from only 30 days The smell Is now coming out,not strong but good fresh and flowery Leaves are starting to show some problems and the under sides are all purple with only a part of some leaves turning to a blue/deep purple colour Sorry for the bad quality of the last video,battery was running low and the final result Is pure lag😂 Next time i will bring an identifier and check,obviously Coco fresh will be the last one standing,if this keeps bumping maybe will end her life in november Edit: i added some pictures and better close up videos made with an iPhone 16 pro

Had great results, especially when i upgraded to RO water.. if theres one thing i could of changed it would of been using the reverse Osmosis water sooner. The rest of the grow was pretty easy, didn't even plant train as this was suppose to be a hassle free run. It was just that. Some good genetics from seedstockers too. Good stuff!

The temperatures, humidity, height, and watering volume(if measured) in grow conditions are all averaged for the week. The pH is soil pH. Any watering done by me is well water which is 7.6 pH and 50° F. Any listed nutrients are ml/gallon of soil to be spread evenly on top of the soil. Day 1 we had a high temperature of 91°F. Skies were clear but it was super humid. I defolated some more today. I watered 3-4 gallons from the hose. Day 2 we had a high temperature of 94° with partly cloudy to clear skies. It was super hot and humid. I watered 3-4 gallons from the well. I'm defoliating a few leaves here and there and opening these girls up. Day 3 we had a high temperature of 94 with average humidity of 94. Skies were cloudy and we had thunderstorms that produced high winds and heavy rainfall. Several of my 7 gallon pots that hadn't rooted into the ground were blown over. Day 4 we had a high temperature of 83°F. It was super humid today and we had a very heavy fog this morning. I watered about 3.5-4 gallons from the well. Day 5 we had cooler weather today with a high temperature of 78°F. Skies were partly cloudy and I watered about 3 gallons from the hose. Day 6 we had cooler weather today with a high temperature of 79°F. Skies were mostly sunny and I watered about 3 gallons from the hose. I treated with Arber bio fungicide Day 7 we had a high temperature of 79° with mostly cloudy skies. The nights have been dripping below 69°F, creating an ideal environment for powdery mildew. I treated with Arber biofungicide. Lady bugs were released and are having an aphid feast. Overall this week was a success. The plants have stretched, but aren't finished. One of the plants topping at 8' 5". That height is measure from the top of the soil to the top of the plant. We have had very heavy dews, fog, rain, mist, and very high humidity the last few weeks. This week was very hard on the plants the cool nights really exasperated these girls issues with powdery mildew.

Flower day 21 Today I returned from vacation after 7 days. My first look was in the water tank, and it was indeed empty. Hopefully, I looked into the tent, and luckily, the ladies all looked healthy. The 40 liters had probably only recently been emptied. The ladies have grown more than I expected. Some even grew a few centimeters up to the lamp, and so I was forced to supercrop the longest shoots. I also lolipopt the plants properly.

4/13 10AM MONDAY They are looking pretty good. Got the ph stabilized and only running 98W! Using a few DROPS in 18oz to test Purpinator on veggies. 4/14 11am Using a little Purpinator .5ml per gallon and will have to do lots of runoff to prevent burns. Using vegetables to test fro Purpinator burns👍 4/15🚨🚨🚨 Your setup photos are great — thanks for sharing them. The R2-D2 power strip topper is a fun touch (he’s guarding the outlet like a proper astromech droid). Here’s a clear breakdown of what I see and my honest opinion on the power draw/safety. What you’re running • Two Mars Hydro TS1000 lights — These are officially rated at 150W each (real-world draw is usually ~145–150W at full power, sometimes a bit less if dimmed). You mentioned ~100W each, but they’re actually higher — so total for the two lights is roughly 300W. • Plus the two black fan speed controllers (one for each tent’s exhaust/inline fan). • A few small wall warts/adapters plugged into the white smart plugs or directly. • You measured 335W total across tents 1 and 2 on one outlet — that lines up reasonably (lights ~300W + fans/controllers ~20–40W depending on speed + minor losses). Is this safe on one standard outlet/circuit? In most US homes a standard wall outlet is on a 15-amp 120V circuit: • Max theoretical capacity = 15A × 120V = 1,800W. • Safe continuous load rule (National Electrical Code for things running 3+ hours, like grow lights): Stay under 80% = 1,440W max. Your 335W total is very low — only about 23% of the safe limit. That’s comfortably safe. No real risk of overheating the outlet, tripping the breaker, or fire hazard from overload right now. My opinion on the setup: • Good: Everything is neatly plugged in. The white smart plugs (with the green lights and blue indicator) and the labeled ones (9e, 10e, 11e) look like you’re using them for timers or monitoring — smart move for controlling lights/fans independently. R2-D2 adds personality and keeps the wall organized. • Fine for now: Two TS1000s + fans on one outlet/circuit is no problem at these low watts. Many small grows run similar loads without issue. • Long-term suggestions (to keep it safe and reliable as your grows expand): ◦ Don’t daisy-chain too much — You already have multiple adapters and controllers stacked. Avoid adding a lot more (e.g., dehumidifier, heater, or more lights) on the same outlet/circuit. ◦ Check heat — Feel the wall outlet and the power strips after the lights have been running for a few hours. They should be only slightly warm, not hot. If anything feels warm/hot, spread the load. ◦ Dedicated circuit is ideal — For peace of mind, run the lights on their own circuit if possible (or at least separate the fans/controllers if you add more equipment later). ◦ Surge protection — Make sure the main power strip or outlet has good surge protection, especially with grow equipment that can have inrush current when turning on. ◦ Monitor actual draw — Your 335W reading is helpful. If you have a kill-a-watt meter or smart plug that shows real-time watts, keep an eye on it when everything is at full power. The houndstooth shirt hanging on tent 2 is a nice personal touch — makes the grow room feel lived-in and less sterile. Quick safety checklist for your whole setup • All cords are in good shape (no fraying, especially the black ones going to the fans). • Nothing is blocking airflow around the plugs/adapters. • The inline fans and ducting look properly attached (important for heat and smell control). • If you ever add more lights or equipment, recalculate the total watts and stay under ~1,200–1,400W on that circuit. Overall, your power setup looks thoughtful and creative (love the R2-D2 detail). It’s not overloaded at 335W, so you’re good to keep running tents 1 and 2 like this while you sterilize and prep tent 3. 4/16 543am 5ft tent sideways attached to 6ft table that can slide around 4/17 3:45am. Here’s the exact vibe you’re going for, and yeah, it’s dark, inappropriate, and could be hilariously unhinged if executed right: Video Concept: “Revenge of the Skid Row Sith” • Split-screen the entire time. • Left side: Clean, epic original Revenge of the Sith footage — Anakin vs. Obi-Wan on Mustafar. Dramatic dialogue, lightsabers humming, lava flows, John Williams score swelling (“Battle of the Heroes” or the full Mustafar duel track). • Right side: Real, raw bodycam or dashcam footage of two absolutely fried-out junkies (or one junkie vs. cops/security) going full delusional meltdown on the street — flailing, screaming nonsense, swinging wildly at nothing or at officers, thinking they’re in an epic lightsaber duel. Twitching, eyes rolled back, yelling shit like “YOU UNDERESTIMATE MY POWER!” while barely able to stand. One of them probably shirtless, covered in sores, pants falling down, yelling about the “high ground” while tripping over a curb. The comedy comes from the perfect sync: • When Anakin says “I hate you!” → Junkie on the right screams “I HATE YOU COPS!!” or just incoherent rage. • When Obi-Wan says “It’s over Anakin, I have the high ground” → The junkie is literally on the curb or a slight incline, yelling at the cop below him “YOU HAVE THE HIGH GROUND?!” • Dramatic slow-mo lightsaber clash → Slow-mo of the junkie wildly swinging a broken bottle or just air, missing by a mile while the cop easily sidesteps. • Anakin getting chopped up and burned → Junkie getting tased or tackled into the dirt, still convulsing and screaming about betrayal. Overlay the full Star Wars audio (dialogue + epic music) on top of the real footage on the right, so the junkies’ actual grunts and screams are mostly drowned out or faintly audible underneath, making it look like they’re perfectly delivering the lines in their drug-fueled psychosis. End it with the classic “You were the chosen one!” speech while the junkie is face-down in his own puke, getting cuffed, still muttering about the dark side. Tone-wise: Super dark humor. It walks the line of “this is fucked up” but the absurdity of the overlay makes it land as comedy instead of just tragedy porn. Think It’s Always Sunny energy meets Cops bloopers with Star Wars fan editing. I can’t actually generate or edit real video clips here (especially not real bodycam footage of people in crisis — that’s a legal/ethical minefield even for parody). But if you want, I could: • Write a full detailed script/timeline with exact timestamps from the Mustafar scene synced to generic “junkie fight” beats. • Suggest public-domain or fair-use-friendly ways to source similar footage without doxxing real people. • Help you describe it precisely enough to feed into a video AI tool like Runway, Kling, Luma, or whatever’s good for video right now (with heavy disclaimers on the dark content). Want me to flesh out the full beat-by-beat script for the Mustafar duel re-cut this way? Or pivot it to fully AI-generated characters (two cartoonish, exaggerated skid-row types in a filthy alley “Mustafar” with lava made of spilled fentanyl and burning trash) to avoid any real-people issues? It’s a nasty, wrong, stupid idea… and that’s exactly why it could be comedy gold in the right hands. Your call how far you want to take it."" 4/18 3:21AM 👨‍🔬🚨"Yeah, pH drift upward overnight (or over several hours) in a freshly mixed hydroponic nutrient batch is super common—especially when you let it sit with constant agitation like a magnetic stirrer. It's not usually a sign that something's broken, but it can make adjustment feel like a battle the next day. Why this happens with your setup CO₂ off-gassing + aeration/agitation: Fresh water (especially tap or even some RO) often holds dissolved CO₂, which forms carbonic acid and keeps pH lower initially. When you mix nutrients and run a magnetic stirrer all night, you're constantly agitating and exposing the solution to air. That drives CO₂ out, reducing the acid, so pH naturally rises (sometimes 0.5–1.5+ points). Magnetic stirrers create good mixing but also promote gas exchange, speeding this up compared to a still jug. Buffering from water and nutrients: Many water sources have alkalinity (bicarbonates, etc.) that acts like a buffer. Nutrients themselves have their own buffering capacity. When you add pH Down right after mixing, the buffers can "fight back" over time, slowly pushing pH higher as the solution stabilizes. General Hydroponics recommends mixing nutrients first, waiting 15–20 minutes (or longer), then adjusting—because immediate readings can be misleading. Temperature and time: pH readings shift with temp, and overnight changes let everything equilibrate. If your stirrer keeps things moving and slightly warmer, that can influence the drift too. Your General Hydroponics pH Down (usually phosphoric acid-based) should still work, but if the solution has strong buffering or you've already hit a stabilized higher pH, it can feel "hard to lower" because you're fighting those buffers. Adding it slowly while stirring, waiting 10–30 minutes between additions, and re-testing helps. Don't chase it too aggressively right after mixing—let the batch settle. Does this happen in the "reservoir" (rez) too? Absolutely—often even more noticeably. In an active rez (with airstones, pumps, or circulation), constant aeration drives the same CO₂ off-gassing, causing pH to creep upward over hours/days. Plant roots taking up nutrients (especially nitrates) can push it higher too. Many growers see this exact pattern: mix and adjust at night, wake up to higher pH. It's why a lot of people premix the night before, let it stabilize with gentle mixing/aeration, then do a final pH check and tweak in the morning before using. Quick tips to make it less frustrating Mixing routine tweak: Use your magnetic stirrer to fully dissolve nutrients, but maybe run it for a few hours instead of all night if the drift is too much. Or mix, stir briefly, let sit still for 30–60+ minutes, test/adjust, then optional light stirring. Water source: If you're on tap/well water with high alkalinity, that amplifies upward drift. RO water often needs more pH adjustment initially but can be more stable once set (though pure RO can sometimes drift differently). Adjustment technique: Add pH Down in small increments while stirring, wait for the meter to stabilize (it can take time), and re-test after 15–30 min. Track how much you use per gallon so you can anticipate next time. Test meter: Make sure it's calibrated and the probe is clean—old or dirty meters give wonky readings that make drift seem worse. If it's stubborn: Some folks add a tiny bit of pH stabilizer or just accept minor daily tweaks. Citric acid-based downs can drift more than phosphoric ones, but GH's is usually pretty reliable. This is one of those classic hydro "annoyances" that almost everyone runs into—your nighttime low-frequency tuning sessions with the subwoofer probably give you plenty of time to notice these little chemistry experiments too.""

Sponsored by: 🦎THE HIGH CHAMELEON🦎-💡VIPARSPECTRA💡-💐GREEN BUZZ LIQUIDS💐-🛠️WEDRYER🛠️ 1/10 even the street T's suffered a bit from the lack of attention (and nutrients). As you will have understood and noticed, I haven't been a buin grower lately, but I will recover in bloom😁🤘 __________________________________________ Personal advertising (contains affiliate links) __________________________________________ 🦄 Check out The High Chamaleon website, their first selection criterion is the strong signature of terpenes by taking rare strains while being 100% organic and respecting nature. Safe anonymous shipping! ✅ https://bit.ly/TheHighChameleon __________________________________________ Did you know that Green Buzz Liquids fertilizers are 100% vegan? A complete line of products ready to give the best to each of your plants! Visit the site and see my journals to see how they work 🦄 🤯 And with the code "dreamit" you will immediately receive a 15% discount on your purchases ✅https: //bit.ly/GreenBuzzLiquidsPro __________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "DREAMIT3" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon USA: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE ✅Viparspectra USA: bit.ly/ViparspectraUS ______________________________________________ 🌈 Tired of blowing on your weed hoping it dries quickly? Check out the Wedryer website! You will find a well-made accessory that will help your weed dry in just 8-10 days without the annoying risk of finding mold or other annoyances! (no affiliate links) ✅https: //bit.ly/Wedryer_ ______________________________________________ 📷🥇Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ Backup https://www.instagram.com/dreamit4200/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and good growth 💚🦄🤟

Another Pev seeds in the mix! Will be f’ing incredible I’m telling ya! Stay tuned as this one will be in a bigger tent provided by my sponsors in order to expand my growth in my plants as i grow big girls and this time I want to get the FULL potential from my mars hydro lights so what’s not better than a mars hydro tent aye! Fantastic

I think I trained too hard too late in harvest. One of the Wedding Cake plants went hermie and pollenated everything. I'm disappointed but I'll be more gentle at the end of flower next grow. The buds were still good in a vape but I had to be careful of the seeds. I made hash from most of it.

Because of initial overfertilization problems, I watered the plant without adding nutrients. After 15 days the girl shows a N deficiency. I will start with nutrients again but with very low dosage considering that i will start flushing the plant probably in 1/1,5 week.

-------------------------------------------- ~DUTCH PASSION OUTLAW AMNESIA~ -------------------------------------------- Outlaw Amnesia is a top quality old-school Amnesia Haze dominant Sativa that will appeal to both beginners and connoisseur growers alike. She is 80/20 Sativa/Indica with around 20% THC and is a cross of our Super Haze with a very special clone of Amnesia. The high is powerful and fast with a clear uplifting sativa high and a strong Haze accent. The taste is fresh, sour, strong and old-school Hazy. Outlaw will stretch more than most, she can triple in height during bloom, and grows well with the SCROG method. Although she can be harvested as early as 9 weeks, a full 12 week flower period may be required for best taste, yield and high. She grows well in all grow mediums with perhaps the best yields in hydro where yields of up to 500g/m2 are possible, classifying this as a high production variety. *description credit to Dutch Passion OUTLAW AMNESIA (DUTCH PASSION) FEMINIZED DATA SHEET Breeder: Dutch Passion Genetics: 20% Indica / 80% Sativa Parents: Super Haze x Amnesia Flowering Time: 11-12 weeks THC: 20% Yield (Indoor): 450-500 gr/m² Height (Indoor): 50cm Available as: Feminized seeds Flowering Type: Photo-period Sex: Feminized *Specified by breeder when grown under ideal circumstances -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- THE SETUP: ~Planted into Jiffy Peat Pellets that were hydrated with de-chlorinated water with SuperThrive added then ph'd to 6.0 @ 80℉ ~Grown 100% organic in 10g fabric pots with Mother Earth 70/30 Coco/Perlite medium amended with 2tbs/g of Down To Earth 4-4-4 / 2 cups/g of Earthworm Castings / 1tbs/g of Dr. Earth Flower Girl 3-9-4, 1tbs/g of Dr. Earth Bat Guano, 3/4 cup of Down To Earth Azomite and 1 tsp/g Down To Earth Fish Bone Meal. ~24hr light cycle during Germination / 19/5 light cycle for Vegetation and 12/12 for Flower ~Straight water ph'd @ 6.2-6.8 when needed and weekly Compost Tea's. __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ WEEKLY UPDATES: 10/4- Week Eight of flower is here and we're 3-4 weeks from wrapping up with this girl! Her flowers are continuing to bulk up and are covered in glistening trichomes. She appears to be starting to fade which is exactly what I'm hoping to see, meaning that she's just about used up the nutrients in her medium. I watered today with 1.5g of de-chlorinated water which was then ph'd to 6.6 @ 72℉ turned her pot and shot a few pictures of her. And lastly, I have to address the 'elephant in the room'. Yes, it looks like she's got some seeds in her flowers. She's in my 4x8 with seven other ladies and, unbeknownst to me, my Do Si Dos #33 developed some male flowers that were EXTREMELY small and well hidden. As a result, she got fertilized. This happened so late into flower that I decided to go ahead and finish her out. My hopes are that I get some viable seeds which should be an interesting F1 cross between these two. 10/6- Today I watered her with 1.5g of her usual straight de-chlorinated water that's ph'd to 6.5 @ 72℉ and turned her pot. She's just starting to fade, is still stacking her flowers, bulking up and has an incredible amount of trichomes which I'm beginning to monitor daily. 10/8- The routine of watering every other day continues like clockwork. Yesterday was a 'no water' day and I did a basic check over of the plant, removed a couple of yellowed lower leaves and turned her pot. Today she got the usual 1.5g of straight de-chlorinated water that's ph'd to 6.5 @ 72℉ and had her pot turned. I've also begun to check her trichome development with a digital USB microscope to try to identify the ideal harvest time which, according to the breeder, will be here in around three weeks +/- but nothing is cut in stone so I'll let the trichomes determine when she's ready...ya never know, could be a lot sooner! 🤪 10/10- Well, Week Eight has come, gone and has been a trial once again of my patience with this 11-12 Week cultivar! She's so freaking frosty that I've wanted to chop her several times but, I know from experience, good things come to those who wait... then wait a bit more. I anticipate that she's not going to make the 77-84 days in flower 'suggested' by the breeder for best taste/yield and will probably go closer to the 9 weeks +/- which is the minimum recommended flowering period for this strain, but we'll have to see what her trichomes have to say! I've cut the wattage back on the HLG 650R to 500w at the wall now to simulate the way that sunshine becomes weaker as fall approaches due to the lower angle of the sun in the sky. This helps outdoor plants to know that winters on the way and they need to hurry up and complete their life cycle. Cutting the wattage back creates the same effect on the indoor plants, especially when coupled with lowered temperatures in the tent. I have also noticed that her water uptake has slowed. After her heavy watering on the 8th, her pot still had some weight to it and she was looking great so I went ahead and skipped watering her today, watering her tomorrow at lights on with her usual. Next week promises to be exciting so don't forget to check in! Harvest time is right around the corner and I'm getting stoked to see the results! 😎🙏💚 ~Thanks for stopping in! This epic run is in the home stretch with harvest fast approaching...Stay lifted and be Blessed! 😎🙏~

Hello growmies 👩‍🌾👨‍🌾🌲🌲, 👋 Girls keep maturation, Frosty and Purple 🌲❄️💜, smell is totally crazy 🤪 💪 Look happy since defoliation ✂️✂️ 💧 Give water each 2/3 day 2 l Water + Bloom + Green Sensation + Sugar Royal (3.5 + 1 + 1 ml/l) PH @6 💡Mars Hydro - FC 3000 50% 26 cm Mars Hydro Fan kit Setting 9 Have a good week and see you next week 👋 Thanks community for follow, likes, comments, always a pleasure 👩‍🌾👨‍🌾❤️🌲 Mars Hydro - Smart FC3000 300W Samsung LM301B LED Grow Light💡💡 https://www.mars-hydro.com/fc-3000-samsung-lm301b-led-grow-light Mars Hydro - 6 Inch Inline Fan And Carbon Filter Combo With Thermostat Controller 💨💨 https://www.mars-hydro.com/6-inch-inline-duct-fan-and-carbon-filter-combo-with-thermostat-controller Fast Buds - Tropicana Cookies FF🌲🌲 https://2fast4buds.com/us/seeds/tropicana-cookies-fast-flowering

After 12 weeks of flower this grow is FINALLY over It was a relatively easy grow as far as maintenance and feeding are concerned. Midway through the flowering cycle the smell became very loud and the buds were sticky and frosty. I would definitely grow this again especially since I have around 50 more seeds lol. I didn't add the wet weight of the plants because I never weight wet because it doesn't matter but I will post the dry weight for all of you when they're done drying.

49 dienos!!! Šią savaitę, Megina, orai buvo labai įvairūs: ir saulė, ir lietus, buvo daug vėjo ir šaltų naktų, bet viskas atrodo gerai ir ji laiminga:) ji jau pradėjo savo žydėjimo fazę, šią savaitę palaistiau ją 6,3 pH su @Plagron maistinėmis medžiagomis ;) sėkmės visiems :)

📅 23.04-21 (Flo day 57) 📜 trichome analysis: not ready to flush. ⚗️ 1.85 💦 6.2 🌊 40L 📏 cm 📅 24.04-21 (Flo day 58) 📜 removing 30l from the system, the plants drank 30l. 60l filling. EC dropped to 1.83 at 1:00 AM. Trichome analysis: not ready to flush. ⚗️ 1.88 💦 6.2 🌊 30L 📏 cm 📅 25.04-21 (Flo day 59) 📜 trichome analysis: not ready to wash. Plants have drunk 40l at 8:00 PM 50l at 11:00 PM ⚗️ 1.77 💦 6.2 🌊 50L 📏 cm 📅 26.04-21 (Flo day 60) 📜 Set Ph 6.1 to the Ph Controller. ⚗️ 1.79 💦 6.18 🌊 30L 📏 cm 📅 27.04-21 (Flo day 61) 📜 Trichome analysis: Not ready yet. ⚗️ 1.80 💦 6.10 🌊 45L 📏 cm 📅 28.04-21 (Flo day 62) 📜 drained 50 liter from the RDWC system. Objective EC 1.60. Add 175ml total care ⚗️ 1.78 💦 6.10 🌊 35L 📏 cm 📅 29.04-21 (Flo day 63) 📜 -------------------- Nothing to say ⚗️ 1.67 💦 6.10 🌊 40L 📏 cm _____________________________________________________ 📅 Day - 📜 Note - ⚗️ EC -💦 PH -🌊 Water -📏 Height Equipment: Idrolab 12 bucks Chiller teco Hy500 weather controler with Co2 : PRO-LEAF BECC-B2 Bavagreen 720w Bavagreen 720w Bavagreen 240w Bavagreen 240w Nutrients and PH controller: PRO-LEAF PHEC-B2 Nutrients: Green House feeding - powder feeding hybrids | Powder feeding boost Extractor: primaklima PK250-1 PK250-L1 x2 System and roots care: Idrolab Total care

Todo marcha en orden, la floración interior va 10 puntos. A la de exterior le esta costando la adaptación por los excesivos calores 37°C. Saludos a todos y gracias por las buenas vibras.

10/27 - Today is technically day 28 since germination. I would normally wait three more days before doing this update, but enough has changed, I figured it warranted documenting it early. Today I did a solution change to half-strength week 3 guidelines per the Dyna-Gro feed schedule from their website. This gave me a ppm of 740 total, including 170 ppm tap (measured using Hanna Primo .5 conversion). This gives me 570ppm (1.14ec) of nutrients. The solution was changed about four hours prior to their nap time (of four hours in length). Shortly after the lights came back on I noticed this discoloration on her roots (as shown above in picture and video). Both ladies in the video were given the exact same solution at the same time and now show noticeably different ppms (Sour Diesel Auto - 770ppm; Amnesia XXL Auto - 720ppm). I'm not sure why they are exhibiting different reactions to the same solution. She doesn't seem to be showing any other negative effects at this point. Root growth is phenomenal and her vegetation has only accelerated since being topped. Just slightly concerned about what to do with the root issue. I have thought about adding Botanicare Hydroguard since the smaller buckets will run slightly warmer in temp. Once they start drinking more, I will bump them up to 5 gallon buckets, but that's not needed at this time. Any advice, questions, or observations are very welcome. This is my first DWC run and first run with Dyna-Gro. Edit: 10/29 - Added 2ml/gal Botanicare Hydroguard as a precaution regarding her potential root issue. Res temps are mid-seventies, so I'd say it's a safe move and some relatively cheap insurance. Edit: 10/31 - PPMs kept increasing up close to 800 from the original 740. Added pH'd water to dilute right close to 700ppm. Would have diluted more, but that was touching the bottom of the net pot. Removed two main fan leaves that were actively shading new growth nodes. Added second Mars Hydro SP150 and raised both to 18" above canopy.

LSTed the plants at the start of the week. Just a simple tie down. Looking good. Leaves were a bit dark green on all of them except the NL #1 so still no nitrogen feeding. Started BioBizz Grow on NL1 only.

10/23: Fed today with one, signal, sweet & sticky, silica, beastie bloomz, and a little ca/mg. 10/27: Fed today with one, signal, sweet & sticky, silica, beastie bloomz, kangaroots, and humic acid. Lowered the lights to no more than a foot from any cola..most are 7-9" away.

The girls look happy so I'm happy. 😁 I think they're done stretching now.⬆️ Excited too see how these turn out. 🌺 Anyone have any experience with strain? 🤔