Very fun strain to grow. Easy to train and love to get big. We had 2 different expressions on the plants and both where very pleasing. Both plants grew vigorously and provided me with just over 3/4 pound of dry medicine!

🍊🏵️ Red Mandarine x9 SoG X ViparSpectra XS1000🍊🏵️ 🏵️8.6 ... 🏵️9.6 Last day before harvest, yeah !!!!! It is really gorgeous !!! 🏵️10.6 ... 🏵️11.6 ... 🏵️12.6 ... 🏵️13.6 ... 🏵️14.6 Latest photos of the plants still in pots, they are already hanging ready to be cleaned _________________________________________________________________________________________ ❓ Are you new to the world of the cultivation and don't know where to safely buy your seeds? 😮From SweetSeeds you can find award-winning, sweet, fast, fragrant, beautiful, and delicious genetics !!! ✅http: //bit.ly/SweetSeeds_ ______________________________________________ 👀 Are you looking for a good lamp to start with? 👀 🌞Viparspectra has something more than the others, take a look at their site. ⏩ Use "GDVIP" for an extra discount or "ViparDreamIT" for an extra 5 %% discount 👀 Search for it on Amazon ✅Amazon US: https://amzn.to/30xSTVq ✅Amazon Canada: https://amzn.to/38udUVe ✅Viparspectra UE: bit.ly/ViparspectraUE 👀 Watch my ViparSpectra XS1000 unboxing on YouTube, leave a like and write to the channel 🦄 ✅http://bit.ly/UnboxingViparSpectraDreamIT ______________________________________________ 📷🥇 Follow the best photos on Instagram 🥇📷 https://www.instagram.com/dreamit420/ 🔻🔻Leave a comment with your opinion if you pass by here🔻🔻 🤟🦄💚 Thank you and enjoy the growth 💚🦄🤟

June 28, 2023 Day 50 Zkittlez One: Height: 24.5" DLI: 52 mol/m²/d Light Height: 22" Zkittlez Two: Height: 28.5" DLI: 55 mol/m²/d Light Height: 18" This week will focus on Zkittlez One and getting her thinned out properly. I hope to have that finished by the end of the week. I've also raised the light again to keep the distance at 22" above the canopy. It's also helping Zkittlez Two. As she is a 28.5" plant, she was definitely a bit too close to the light. The other plants in the tent may not have enough light from the higher light height. I'm not sure for good or bad. Zkittlez One has hit the 24" plus mark! She looks fantastic. I definitely need to thin out the foliage a bit. I'll wait for her to finish up. But I'll just pull a few here and there as needed. However, I don't expect much more stretch out of her. Maybe a couple more days? We shall see. Water looks great. The stacks coming off this lady are, IMO, fantastic. The whole canopy is covered in tops and shoots still reaching. Honestly, if she was alone in the tent, I'm pretty sure I could have trained her wall to wall. Alas, I have 3 other plants in there who also need light space. Lol. Zkittlez Two is also looking great! She's filling out a bit still and building up those buds. I have a bit of confusion with her top. The buds are very skinny at the top and get fatter in the mid range of the plant. Around where the side branches grew to. Happily, they match the height of Zkittlez One. Or just a bit lower. Grow System Environment: Temp: 74.6° RH: 62.3% (still super humid here) VPD: 1.07 kPa June 29, 2023 Zkittlez One This plant has been a beast the whole time. Now she is getting too big for the tent and way too big to accommodate 4 plants as I have in there now. The canopy is super deep and needs a good thinning out. Speaking of thinning out, I decided to remove the outer leaves to open more space for the other plants. I'll be doing this over the course of the next couple days. She also got a full reservoir refill today. Cleaned up the reservoir as well. Zkittlez Two This lady needs absolutely nothing. Just hanging out and showing me what I should be expecting for bud production out of Zkittlez One. Honestly, I think I need a bigger tent already. I've had this 3x3 for 3 grows and I'm discovering the disadvantage of a smaller tent. Plus the thing people seem to think is best is compact plant. I don't need mine compact. I can grow in my state without issues. The humidity is still super high. So far I haven't found a solution. I have 2 dehumidifiers in there. That didn't work at all. It's the main room the tent is in. It's super humid in there due to the weather. Tent door has been open for days. I'll ask what to do. Maybe someone has an idea. Update: So I was looking over Zkittlez One this afternoon and realized taking the tie downs out made the plant compact, but a bit too compact. So after some testing I figured out that I needed to tie down the lowest 4 branches to open up the center of the canopy. It worked WONDERS! The 4 branches along with all of the tops from each one spread out perfectly, completely opening up the whole canopy. She is seriously huge now. See pic. Just WOW I've also added a video to show her mass. Grow System Environment: Temp: 74.6° RH: 62.1% VPD: 1.08 kPa June 30, 2023 Zkittlez One is the boss of this grow. She'll need another watering tomorrow morning. I snipped off some outside leaves today. And a couple blocking bud sites and more tops. A quarter turn made a bit more room for the other plants in the tent. Well, except Zkittlez Two. She is in the way back almost engulfed by Zkittlez One. Zkittlez Two has some awesome bud production going on. She may need a watering soon as well. Anyway, the whole plant is covered as I thought it would be. The buds haven't even started to swell yet. It's just going to be that much bigger. Grow System Environment: Temp: 73.9° RH: 64.4% VPD: 1.01 kPa July 1, 2023 Zkittlez One looks absolutely amazing. Massive and still growing. She's nearly 30" wide. 24" deep. She is also 25.5" tall. I don't know if this is big for an autoflower, but I assume it is. It's the biggest I've ever grown. She doesn't need water yet, but at her rate, she may need another gallon tomorrow. I snipped off just a couple more leaves today, just opening air flow and bud sites. Zkittlez Two looks great as ever. I decided to finally pull some fan leaves. Just the main stem ones and a couple that was completely covering another branch or facing inward. She'll need a new reservoir tomorrow. My major concern is how much she is squished in the back. With the 4 plants in there and that one massive Zkittlez, the 2 vegging plants need all the light they can get, which puts this lady in the corner. I was honestly considering moving her to my dry Tent and popping the light back in there. Something else I noticed is the bud structure. They seem quite wispy maybe it's just how they form for now. But they are also really skinny. Especially the main cola. I'll have to keep an eye on that and see what I can do about it, if anything. Grow System Environment: Temp: 74.5° RH: 63.3% VPD: 1.06 kPa July 2, 2023 Zkittlez One is now officially in the flowering stage. I'd say 2 days ago, but now the buds are really forming. The top of the canopy reads out at an impressive 26.5" tall. 29" in diameter. More bud sites and tops that I'm willing to count. Just a lot. She's going to need more water first thing tomorrow. Maybe later this afternoon. She's super thirsty and that's a great thing. I've also managed to thin the whole plant out. Not a full defoliation, but a few leaves here and there for about a week. Now she looks near perfect. Zkittlez Two looks great! Still buried in the back and the buds are still pretty wispy. At least the ones up top. Lower bud production is fantastic! Big fat buds. I might have to drop the intensity very soon to save the main cola. She's definitely not as thirsty as Zkittlez One and I am still a bit concerned about that. She did however finish stretching at 29" tall. Grow System Environment: Temp: 73.5° RH: 62.2% VPD: 1.05 kPa July 3, 2023 I dropped the light intensity down from 90% to 80% last night. Zkittlez One was drooping about 4 hours before lights out. I read somewhere that too much light can cause that. So we shall see how it looks tonight. Zkittlez One needs more trimming I think. She looks great, but she has an 18" deep canopy and I'd rather give light to the whole thing. The top 5" are fine, but below that is a thick floor of foliage. I trimmed some of it away today, it I'm gonna need to continue for a bit. At least some for next 2 weeks. Every other day. Healthy is an understatement with this plant. She is really tall with the whole setup with bottom reservoir. 40" from floor to top. Impressive. Zkittlez Two is so stuffed in the wall, I feel bad. I might have to take her out and put her in my dry tent with a 100 watt light. That is still up for debate. It's an extra 100 watts of power I'd be using. However, the extra space will certainly give the whole plant more light coverage and produce better buds I think. I'm going to try and maneuver them in the current tent and see what I can do. Update: So Zkittlez Two was really squished in the corner. So I removed one of the smaller plants and moved Zkittlez Two diagonally to Zkittlez One. I also got to pull the 4 main side branches out for better light penetration. Grow System Environment: Temp: 74.2° RH: 62.7% VPD: 1.07 kPa July 4, 2023 Zkittlez One is still growing a bit I think. The grow light is only 18.5" above the canopy now. Where it should be at 22" I'll have to see what I can do. Doing great on water and healthy as ever. I did start a bit of pruning. The popcorn buds on the bottom of the canopy. I'm not cutting the longer branches though. I feel like that might cause more stress. But I'm going to pull off popcorn buds for the rest of next week and of course remove fan leaves as needed. Every leaf is super healthy, just in the way of air flow and light. Zkittlez Two is much better in the front of the tent diagonal from her sister plant. Much more space. And with the side branches pulled out, I expect to see much better bud development. She's still a slow drinker, but I'm starting to think it's the humidity that's preventing her from drinking more. This is an entire week or more of humidity and lack of the right equipment. So I'm really hoping I don't end up with bud rot or mold. I don't think I'll get mold because of the air circulation. But bud rot later on is very possible. Maybe not probable though. I don't know. I don't have much experience with it, so yah. Either way, the grow tent door will be kept open to keep the humidity at a kind of reasonable level. Grow System Environment: Temp: 73.6° RH: 65.9% VPD: 0.95 kPa

Most definitely a great strain to have in your garden if you want some color. Yield isn’t much but the flowers make up for that. I wish this strain had some more funk to it. My last Devil Cream lady smells straight like citrus. Stay tuned for its harvest. Thank you all for following my first grow dairy. Make sure you follow my future grows and follow me on Instagram.

Per adesso non ci sono commenti, sono impressionato e basta! 😝

Buds stacking up nicely. Did some overdue trimming/defoliation to help with light and airflow. They are some thirsty girls. Looks like I've got all 3 phenotypes of this strain represented: short and bushy, thin and wispy, and Original Recipe. I'm not sure which is which. Meh. I'm optimistic regardless.

This week, I gave my plants more fertilizer to test if they show any signs of burning. Now, I'm stressed out! I think I should give myself some seaweed to relieve the stress 😂 The girls show signs of calcium deficiency. I sprayed a small amount of calcium and magnesium on them to help them recover faster. I’m not sure why the new leaves are very pale. Could they be lacking iron? I think the high soil moisture might be causing issues with iron absorption, but I’m not completely sure. I’ll wait and see what happens this week. Considering that I use regular water, I expected them not to have a calcium deficiency.

Day 56 of flowering of the 2 Hyper Glue from Anesia Seeds Getting to the end of the line of this beautiful 2 plants she frosty she smells absolutely amazing she flushing very good and is almost done but here leaves are still Green en very healthy looking 🤔 here leaves should be turning other colors because of getting the feed out of the soil ore i am i wrong and can the nutrients be flush out but leaves still very healthy looking ? Trichomes are looking good how i want them so i am bit confused with this one but if the ppm is down enough i might just cut here down because she is looking fucking great 👌🏻 23/12/21 Runoff is around 1100 ppm almost done 👌🏻 25/12/21 Runoff is around 800 ppm I will be now drying the pots out and then it's chop time for these 2 26/12/21 Day 58 flowering runoff 600 ppm 🤘🏻 beyond frosty buds are HUGE!!! smell is Tru the roof Super Glue x Apple Fritter is something els thricome are where i want them and has a day to go to dry out the soil and then light's out for 24 hours it was a perfect grow From beginning to end can recommend any grower Hyper Glue from @anesiaseeds 28/12/21 Chop chop 1 hyper glue One left to chop good times Happy holidays people hope you have some great days stay healthy take care of the one's around yeah and let next year be more weed and Less fucking corona so i can get my ass to Alberta Canada for month vacation to see if we could move there 🤘🏻🇨🇦🤘🏻 visit www.marshydro.eu for your best gear and use the PROMO CODE: DEVILSBUD Some info about the Marshydro FC-4800 Superb Quality LED Chips: The whole light is composed of 1206 pcs Samsung lm301b and Osram 660nm chips. More than two times as many LEDs are used to drive the grow lights at low currents and to avoid overdrive. Quality is guaranteed and efficiency is up to 2.8 μmol/j. Even PAR Distribution and High PPFD Output: The multi-light bar design and the densely distributed light chips enable the LED grow lights to achieve the optimum PPFD required for plant growth over the entire effective coverage area. Specifically Designed Spectrum: To ensure even plant growth, blue and red light are enhanced on the basis of a full spectrum combination. Not only does this accelerate plant growth, but it also improves the yield and quality of the plants at the same time. Dimming Daisy Chain Function: The dimming function saves on electricity costs and enables brightness from 10% to 100% for the different stages of plant growth. A single master light can connect up to 30 lights in a daisy-chain system. Business LED Grow Light: The light's wavy heat sink dissipates heat quickly and the IP65 waterproof allows the light to operate in humid conditions. 180° collapsible feature for easier installation. All these features provide favorable assistance for commercial cultivation. And some tent info ●【Lock All Light Insid】MARS HYDRO Grow Tent Interior is made of diamond mylar. Non-toxic to the environment, no harm to plants. High-quality 1680D canvas being double stitched, (ALL OTHERS BRAND grow tent is 601D canvas) which is tear-proof for perfect light locking, No light leaks or rips at all. ●【Durability Grow Tent】Stable Metal corner adapters and poles are the trustful supporters of the tent. No rusting nor paint-falling. Quick easy tool-free installation. Carries strong heavy-duty SBS zippers, double layer lining to create a light-proof seal. ●【Easy Observation of your Plants】Special peeks window made by double layers of cloths. Observe the growing conditions of your plants without opening the tent and avoid disturbing plants. The peek window also serves to dissipate heat and ventilate air. ●【Removable Tray Keep Clean】The package includes a removable waterproof floor tray to hold soil and fallen leaves. The tray can be taken out easily to wash. Removable and water-proof makes cleaning easy. ●【Good Ventilation&Fast Assembly】 Circular double-sleeved vent holes with adjustable nylon strap for air circulation by exhaust fan, ducting, carbon filter, or reflector. Better allows proper light, heat, and airflow. Quick tool-free installation. Reinforced by a sturdy metal frame to ensure security and stability, supports up to 140lb. Perfectly safeguard your plants to thrive even in winter

Hello growers and tokers! 👋 👩‍🌾 🧑‍🌾.🔥💨 There has been much change this week!! First there was a big defoliation done, I cleaned the bottom of the plant. All the growth that wouldn't amount to anything because the light doesn't penetrate that low. Also took off the biggest fan leaves to give more room for light. Then finally switched to 12/12.. After just 36 hours after the defoliation there was a major change. New growth everywhere, colas started stretching upwards fast. It's like she already knows it's flowering time. Great reaction to the defoliation and 12/12 switch. I'm still watering every other day, After the defoliation I watered with only Enzymes 2ml/L to clean the roots a bit then started with the nutrientes again. I dropped the amount of grow nutrients from 3ml/L to 1ml/L and started adding bloom nutrientes 2ml/L for now. I'll slowly be upping the bloom nutrientes and after week 2 I'll no longer add grow nutrients. That's it for this week. Stay tuned to see how she flowers. Stay safe!

Did a top dress of some grow powder dry nutes from botannicare. Just giving her rain water for now. Again—- temps, humidity, and clouds have been aalllllll over the place. One day it’s 86 and the next is 66 with nights in the 60s or 40s—- humidity and rain have been 100% down to 50%. All within a week.

Holy Sunday She is two weeks in flower and grows so vigours. Every Day I keep on tucking the branches under the strings. The Screen is slowly filling up. In 4 or 5 days I will stopp tucking. Light Power: 80% Day 53 Flower #8 Watered with 2,5L freshly brewed compost tea Sprayed with freshly brewed compost tea Day 56 Flower #11 Watered 2 L tap water

Not much to say if following other diary tips burn tiny bit and yellow tops I little flushed with oh water and clear hopefully does trick goin to true black molasses in next couple feeds on a few just to expirement a little I hear it’s good for Cannabis plants all around

I want to apologize for missing so many weeks. I am currently transitioning to San Diego, CA. My Gro could of been better, but living in a legal state. Skies the limit!!!

Transplanted week 5 put it 3 gal cloth pots 1/3 strawberry fields soil, 2/3 Happy frog, 1/2 cup rice hulls total, mixed into both soils. watered with recharge mix 1/4 tsp to a gallon of water. Back in to the veg tent.

All photos taken day 25 of flower. Started to develop a nice aroma now, I’ll have a little de leaf in a day or two to help lower humidity and uncover some flower sites. Can’t wait for it to warm up so I can switch my heaters off! ✌️

Hola!! Bienvenidos a esta nueva aventura. En este diario cultivaré la genética de dición limitada del banco GB Strains bajo una luminaria LED de mars hydro, la sp 150, que da unos 140 watts de potencia nominal y en espectro completo. El armario será un trafika de 60x60 y el medio de cultivo 11L de coco en maceta de plástico blanco. El coco va a ser un ladrillo de ugro de 3L hidratado con agua a ph de 5'5 y sin recirculación del agua. La germinación será en papel y usaré el seedboster de plagron ya que he leido varios casos de problemas en la germinación de esta genética y únicamente tengo 3 semillas y me gustaría gastar solamente una. Como novedad para los seguidores escribiré este diario en español, mi lengua nativa, dado que el banco de semillas GB Strains opera principalmente en España, y creo que también en Francia y me suena que Reino Unido, pero no estoy completamente seguro de eso y la idea es que sea lo más útil posible para otras personas. En cualquier caso recordad que en la parte izquierda de la página se pueden activar opciones de traducción a varios idiomas. Sobre la genética remarcar que el banco indica unos porcentajes de thc de 30-33%e n condiciones óptimas con un uso recomendado medicinal y con efecto de relajación intensa. Si no tengo problemas durante el ciclo de cultivo y éste se desarrolla correctamente realizaré un análisis de cannabinoides al finalizar el secado y si este no fuera concluyente o diese valores de menos del 20% que es una desviación bastante sustancial, realizaré otro tras el curado para verificar. Hace bastante tiempo (años) que no cultivo una genética fotodependiente pero espero no tener ningún problema Para los abonos utilizaré GHE/terra aquatica que ya he utilizado con muy buenos resultados (de momento) en mi primer intento con coco y añadiré también fulvic (o diamond nectar) de la misma casa Germinaré la semilla una vez tenga montado el armario de cultivo en los próximos días o semanas. Tambioén grabaré todo el ciclo y crearé video timelapse global y semanal para apreciar reacciones de la planta a estímulos y seguir mejorando la técnica La semilla ha germinado en 48 horas. La dejaré un poco más antes de moverla al jiffy de turba Ha tardado pero finalmente ha germinado la semilla y ya está en el jiffy en el armario. He usado el agua sobrante de mojar el papel para germinar para alimentarla estos primeros días. Cuando muestre sus primeras hojas (no cotiledones) empezaré con el abonado. Finalmente será la serie flora de GHE, no la específica de coco. Este es mi segundo intento con la genética, en el primero falló un programador de riego y generó problemas irrecuperables en la planta por lo que la deseché.

Start of week 7 and GSC is one happy lady. Pistil's are slowly turning orange at day 37. Tricomes are thickening and nugs are starting to put on mass. Looking forward to the weeks to come. Any suggestions or comments drop me a line. Happy Gardening 🙏🖖🌱👴🏼

Transplanted all in to final 3G fabric pots. First feeding of monkey nutrients( testing out sent directly from company, UK based company ) 19/12/2020 update - topped and slight LST on all Zkittz berry-ade. Everything is looking healthy. Turned the light up to 50%. Temps a bit low turned off the circulating fan. End to week 1. Plants loving the monkey nutrients.