Creciendo fuerte y adaptándose

Everything going well with this strain no problems and growth is very fast, they bounce back after any defoliation. Day 41 - Gave them a haircut today and a good Biosys tea feed till run of will leave now till start of next week Planning to add a drip irrigation feed system this week to make this a little easier. 🤞 Will update next Sunday now end of week 6 as will be busy adjusting and implementing the irrigation feed.

very sweet and strong smell for fourth flowering week

For the Herbies contest - https://growdiaries.com/diaries/157348-grow-journal-by-dabbertglobberfield#gallery=6777378 - Grandmommy Purple is guilty multiple noise violations for being too loud and for stanky funk. Harvest - 169 days / 66 days in flower Well, we did it. I made it to the end. All I can think is...WOW that was A LOT of work. But I think I had very good results for a first time grower. I For harvest, we took Plant B and D and prepared them for immediate freezing. Altogether, I ended up with 1212g wet on plant B and 1089g wet on plant D. I ended up freezing 1816g of this. There was some from each of these plants that was set aside from freezing because, for whatever reason, I thought they were not worthy of washing because of how progressed the leaf damage was from the root rot battle. So that was cut up and dried as nuggets instead of hanging like the rest. Sawtooth and Plant C were both harvested and hung in the tent to dry for 12-13 days. I think I overdried by 1-2 days because when I jarred them they struggled to raise up to 55%. So I am using rh% packs. After drying Sawtooth and plant C, I ended up at 459.8g for dried flower and 170.8g in dried trim. So just over 1lbs between the 2 plants and 4.15lbs wet between the other 2 plants that was washed for hash. So... are you for real with the effort involved with washing bud for bubble hash? I don't think I would do this in the warmth. I only pursued doing bubble hash cause it's cold right now and I figured that would really help. Even in the 30s(fahrenheit) stuff would stick. It's hilarious how sticky of a process this is. I hope you have a bunch of gloves, water, and ice to burn through. I went through over 60 gallons of distilled water and 80lbs of ice to wash the 4 lbs. I am envious of people in videos using a hose to collect, clean, and refill. Also, doing this as a 1 person show is the definition of insanity. I broke the washings up into 3 parts. The first part was was the tester wash. I broke off 420g of plant D's 848gs available. I used 7 bags to see where I would end up. I used 220, 160, 120, 90, 73, 45, 25. What I determined was that if I was hunting a specific micron with a lot of material this would help find what you can get. But for the next washing I reduced the amount of bags to 4; 220, 160, 45, 25. The time, with the 4 bags, I washed with 809g. I had a much more favorable experience and return this second time but I had green fast and probably used too much ice. The 3rd wash was the remaining 631g and I found an extra 137g I added of sugar leaves and trim, brining the 3rd wash to 768g. I used 5 bags this time; 220, 160, 73, 45, 25. By the 3rd wash I have become an expert in collection but also never want to do it again. lol. 2 of the 3 washes have dried and I have 43.4g of bubble and 2.8g of dry sift. 37.4g of that bubble is able to be pressed into rosin. I will probably press that dry sift as well. The other stuff is 25u or 160u that I will experiment with or cook with. The other stuff is drying so I can't add it all in. I pressed a bunch of trim and some flower. The trim presses nice and the dab is decent. I am working out a good temp for the flower. But the problem with all these tests to find the sweet spot is that I have all these testers to go through but want to keep pressing and trying that! I think I will need to work on a better storage solution. I can't wait for the fresh frozen bubble hash rosin pressing... I have over 20gs of bubble to put in one bag. I am really looking forward to this. But I will need to work up to that pressing since I have never pressed hash/kief/bubble before in my rosin press. So this should be really fun. I will 100% post an update of the hash pressing once I do that and also after the 3rd wash session is done drying. In closing, saying I learned a lot from this grow would be an understatement. I fully expect to start it back up in a few weeks after some R&R then some R&D. There's some things I will need to work on before I start again, such as: having a single external reservoir that feeds multiple plants, hard to clog and easy to use ebb and flow system, miscellaneous final run stuff like space for drying. So thanks everyone for hanging out and perusing the photos and or reading all my huge rambling updates and thanks to those for the help along the way.

Hey everyone. Week 4 begins and all looks tasty. I have cut all the useless branches at thw bottom, as u can see on pic. or video. Also took away some of the fan leaves. The smell is wonderful, plants are looking tough and healthy. Stay high and have a good day.

This was a rainy week so not much watering however she took the new 5 gallon pot really well. I am just extending her veg for the best possibly yield.

~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_ 111821 😽💨Things are going pretty good considering our terrible luck with all things autoflower lol..I think we stopped the calcium deficiency from spreading..these little plants are drinking a ton, 3 gallons every 3rd day..using autos to dial in a tent was pretty hairbrained but things are going pretty good..the MarsHydro fixture is itching to get some photoperiods under it..I honestly can't wait!! Thanks for stopping by grow fam and happy harvests!!! ⚡Mars Hydro/SP-3000⚡ Specifications ⚙️: Diodes: Samsung LM301B / Osram 660nm (960 total!) Driver: Meanwell 300watt 🔌 (300W±5% @AC120V-277V) PPF: 824umol/S ☢️ PPE: 2.8 µmol/j 〰️〰️ Lifespan: >50k hrs ⌛ Veg Coverage: 3 x 5 ft 🌱 Flowering Coverage: 2 x 4 ft 🌼 Weight: 10.1 lbs (4.6kg) -The SP-3000 uses an aluminum heatsink (no fan) and the driver can be placed outside the tent 🌡️⬇️ -IP65 waterproof ratings, tolerant to high humidity grow environments 💦 .. -Up to 30 can be daisy-chained together and all controlled from a single light! 💡~💡~💡~💡~💡 ~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_~_

Poussé sous les mars hydro 45 jour ensuite changé les lumiere par une sun system rs1850 de 720 watt . Les foxtail on apparue lors de-là flush il y a 14 jour . 30% ambré

Flowering slowly, likely due to the roots having low PH(4-5).. I flushed her a few weeks back.. I'm done experimenting with nutrients for now; I had better results, with less issues with just using the basics. *Special Nug picture - This Bud-site has a different shape/structure compared to every other nug on this plant.. Never seen this before, on any other strain.

Hi Guys, Grow Diaries for whatever reason won't allow me to upload my complete harvest video which is a real bummer because I mainly do the videos for my YouTube channel but decided to also include them on grow diaries to give other growers who might be considering growing the same strain in the future. Helps give people an idea of what to expect when they grow it. But honestly I can't be bothered to re-edit it to fit to Grow Diaries setting which I don't even know what they are.... Didn't think they had any! Maybe it's the length of my video..... 🤔! I don't know, but I like to give growers a good description of the strain and smoke review. I hate it when I go to others peoples pages to have a look at a strain I'm thinking of growing and them not having hardly any pictures that properly show you the growth stages of the plants.... Really annoying. Which is why I chose to properly document mine to give you guys or try to give you guys the best view of my grows..... If that makes any sense 😅 https://youtu.be/iYNiI75Vvkg That's the link for my channel guys, the complete King's Juice harvest review is there. Really sorry I couldn't provide a better aspect to the Harvest guys, but at least I know for next time and I will be prepared. 👍🏾

Raised the EC. Exploded after stretch. After defoliating:

Let’s Go Day 67 from seed !! So this week went real great! 2 Ogreberrys an Bruce Banner started getting flushed! The rest will follow up and start flush next week ! Today the 3 will continue getting flushed while the 3 others get there dose of nutrients, PHd at 6.5! Let’s grow lil ladies let’s grow!!! You all have an amazing productive day as well as a a great safe week !! Peace love and positive vibes to y’all Cheers 😶‍🌫️💨💨💨💨🤙🏻If there’s any questions please ask, I’ll be opened up to answer at best of my knowledge! Thank you all have a dank day !!

🌱 MASTER GROW CARD Autoflower Comparative Grow Log 📅 Grow Identification Field Value Grow Start 2/23/2026 (Day 0 – seed) Current Log Entry 3/8/2026 Plant Age Day 14 Plants Papaya Cookies Auto / Forbidden Runtz Auto Seed Type Feminized Autoflower Breeder Fast Buds Genetics Reference (Breeder Data) Papaya Cookies Auto Trait Data Dominance ~60% Sativa Lifecycle ~8–9 weeks from seed Height potential 70–120 cm Indoor yield 450–550 g/m² THC potential up to ~29% Forbidden Runtz Auto Trait Data Dominance ~65% Indica Lifecycle ~9 weeks from seed Height potential 90–130 cm Indoor yield 450–550 g/m² THC potential up to ~26% 💡 Lighting System Parameter Value Fixture MIGRO 150 Array Schedule 24/0 Output level 50% Distance from canopy (not yet recorded)

Thing's are still going well, feeding is going well and they are eating at 2.2 e.c, plenty of food and boost in the solution with no burn, I may increase over recommended amount, had some weird stretching on two of the plants, not sure if something is wrong or just the genetics.. seen first video for example.. Ended up having a fair amount of stretching from the two Jaffa Cakes relative to the washing machine so I've out up the second support net but used it to further hold down the branches. They are drinking lots at the moment, fill recommended dose of A/B/B-52/BigBud, drinking a total of 5-6ltr per 48hrs, e.c coming on around 2.4 to 2.6 however plants seem to be absolutely loving life :)

29 May 2021 I have been super busy and have neglected my little girls the last few days. I started the flowering stage (12/12 light schedule) yesterday, the 28th. I was going to start it on the 26th, but had trouble with the timer. I’m going to stick to my schedule though. Today starts the flowering stage feeding chart, and for this week I’m using the “Transition to Flower” amounts. The water was chilled to 41.5 degrees F, and I began feeding an entire gallon as well. I fed: CALiMAGic 5ml, FloraMicro 7.5ml, FloraGro 7.5ml, and FloraBloom 7.5ml. The initial pH was 6.7 and needed no adjustment. The TDS going in was 851 ppm. Runoff pH was 6.6, and TDS runoff was 1885 ppm. Tent temp was 75 degrees F, and humidity was 50%. I defoliated the living hell out of her today, and rearranged some of her LST points. I also cut some of the lower branches/stems to make the growth more controlled. I have enough to make several clones if I decide to do that. I’m still trying to make up my mind on that. 31 May 2021 My Blueberry Muffin is looking fabulous!! She has adjusted to her massive defoliation with ease and is looking BEAUTIFUL! I’m very pleased with how she’s doing. Both she and her tent mate are looking wonderful. I’m still using the “Transition to Flower” stage, so here’s what I fed: 1 gallon of water chilled to 51.2 degrees F, with CALiMAGic 5ml, FloraMicro 7.5ml, FloraGro 7.5ml, and FloraBloom 7.5ml. The initial pH was 6.7 and didn’t need to be adjusted. The TDS going in was 1054 ppm. She took the whole gallon and had plenty of runoff. The runoff pH was 6.5, and TDS runoff was 2237 ppm. Tent temp was 79 degrees F, and humidity was 44%.

Switched to my 5 gal pots now, dumped 6L of water into each plant to get the pH back down still waiting for them to dry out a little before the next watering which should be less so next week will have water amounts Height is for the holy punch again. Power flower is still around 1.5"

Hey guys . My cutting heating broke 3-4 weeks ago, which was fixed immediately and everything went wonderfully. Now, 3 days ago, the central heating broke down in the entire room, so that at night I only have temperatures of around 13 degrees :-( . One or the other lady is slowly starting to see a phosphorus blockage, as this can no longer be absorbed at temperatures below 15 degrees, like many other nutrients :-( . A friend looked at the heating yesterday and came to the conclusion that a real company had to do it, which is by no means possible for a stranger to enter my room. I quickly ordered heating mats for all the boxes so that the ladies could at least get warm feet. That's all I have this winter full can do . Let's hope everything will be fine 🙏🏻. As soon as the heating mats are attached in the coming days, I will post them in the pictures. Now for the update. Despite the severe cold, the ladies are still doing well and have made good progres . The ladies only had to be watered once this week, each time with 1 l, because it absorbs the water very slowly because of the cold and I don't want to overwater it. I took every single plant in the pot to take a close look at their roots. These are snow white and look very healthy 🙏🏻. It was also the last time neem oil sprayed so that the last trips are finally gone. Otherwise everything was checked and a lot of planning was done, like I do with the heating mats. Since a friend had the same problem in one winter and the heating mats got 10 degrees plus on the pots, I am very confident that it will at least bring something for the last cold month 😃 🙏🏻. I'll start flowering tomorrow by switching to 12 / 12 h because the ladies mustn't get too high because the small flowering tent is only 160 cm high :-) until then have fun and stay healthy 🙏🏻 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this Nutrients at : https://greenbuzzliquids.com/en/shop/ With the discount code: Made_in_Germany you get a discount of 15% on all products from an order value of 100 euros. 👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼👇🏼 You can buy this strain at : Clearwater Seeds Water 💧 💧💧 Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EC. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 5.8 - 6.4 MadeInGermany