This week went by fast! They're growing really fast and always hungry! They're getting ready for the flower stage and entering Bloom. They're getting 2L of H20 per day that's pH at 6.8. I water 2x a day! I turn them on at 6am and give them 1L of H20 at 9am that way they're awake and 1L of H2O at 9pm that way they're split. I feed my nutrients at the 9am watering. I pH my nutrient mix somewhere between 5.8 and 6.2. I also have amended the soil with Soil Recharge and that's once a week as well as the Fish Shit and The Stash Blend. Then, I always flush with only pH H20 the day after any nutrient mix. Overall, the plants are healthy and I'm waiting to see how they turn out!

(Log date week 7, day 49) So this week was a mixed bag, Tuesday started off with me finding a spider web on one of the lower fan leaves on my Hulkberry plant and noticed some bite marks on some of Fat Banana. In my haste to give rid of the spider mites, i caused some minor wind damage to some of the fan leaves on Hulkberry which caused some copper spotting and a stunted Fat banana cola. After i correctly treated both plants for spider mites and wind damage, they both bounced back and started to recover quite nicely. I also noticed a difference between topping these plants at different times; i topped fat banana when it had 4 cola's but i waited until hulkberry's roots reached to the bottom of my 5gal bucket and she had 8 cola's. A BIG difference in their recovery and overall structure, where fat banana jump out the gate with explosive veg growth and hulkberry struggled for two weeks just to develop it's first set of fan leaves. To now whereas hulkberry is much bigger, greener and bushier than fat banana. Hulkberry has responded much better to the additional stress whereas fat banana has struggled or stalled due to the stressful conditions. All in all wasn't too bad of a week, except for the power going out for a couple of hours on Saturday which raised my grow-room temperature to 90f, i was able to put out a couple of fires this week without any adverse long term effects. I also topped hulkberry on the last day of the week and I'm going to continue to feed them Technfloa at the full recommended strength since they have both responded very well to last week's formula. as always my pic are in chronological order Mr. O.G.T

Just a couple days old for this Blue Dream seedling. No watering needed today.

She’s getting a little bigger day by day! Popped when it was pretty cold outside, but it’s has been very hot and humid this past week—- and she loves it!

Leider ist nach der Keimung mein Handy kaputt gegangen, weshalb ich für die woche 2 und 3 keine bilder mehr habe.

Hi liebe Community and Welcome Back! 💚 Im ersten Tetraploid Grow meinerseits, habe wir aktuell richtig starke Entwicklungen zu verzeichnen. Die Pflanze hat von Beginn an einen guten Start hingelegt und sieht richtig Vital und Munter aus 😉 Nach der fünften Wachstumswoche, geht die Pflanze in einen heftigen Wachstumsboost! Sie hat alle anderen Pflanzen überholt in der Höhe wie auch in der Breite. Ich habe die Seitentriebe etwas zur Seite gebogen, worauf sie sehr gut reagiert haben. Dadurch bekommen sie etwas mehr Licht ab. Ab heute kommt die Pflanze in die Blüte! 💚 Ihr Aroma ist sehr grün und frisch, so ein wenig wenn frisch der Rasen gemäht würde, allerdings mit einer leichten typischen Cannanote. Die Bedingungen im Growschrank sind Top! ————— 🌞 Temp: 21 🌚 Temp: 18°C bis 19°C 💨 RH: 58% VPD: 0,75 kPa 💡ppfd: 330 mpm —————

I moved the DWC with the first plant into the 60x60x180 tent with the 240W light. I’m hoping to harvest in a couple of weeks. A pale, underfed plant—which was well-rooted in a 4L coco bag—went into the old tent. I bent it slightly to fit under the light and secured it with a fan wire. Set up an automatic watering system and mixed a batch of the "Hybrids" formula for the first time—giving it a try. I’m also adding the full range of Hesi supplements to the base nutrients, following the dosage chart. Day 47 of 12/12 (Week 7 of 8–9).

I gave Isopropyl alcohol 70% equal parts water, 1 tsp cayenne, and kept enough for multiday application, what little population of aphids is left I shall catch them the next morning, opening the tent 10 min before lights on the clovers have yet to open, all the aphids hiding on undersides are easily visible, still none ever went near cannabis plant. Clovers are far tastier it seems. The alcohol kills on contact, the idea was to saturate the leaves with a light foliar application, and once I was done I ran it through the canopy with my hands making sure as much of the clover surface came in contact with the iso, once done turned on the fans and evaporate it quickly. Beautiful thing about Isopropyl is that it evaporates rapidly at room temperature way below boiling point leaving behind zero residual so nothing seeps its way into rootzones unless you spill it there. It is a magical solvent that leaves no trace that it was ever there. Resonant Frequency: A resonant frequency is the natural vibrating frequency of an object and is denoted as ‘f’ with a subscript zero (f0). When an object is in equilibrium with acting forces and can keep vibrating for a long time under perfect conditions, this phenomenon is resonance. In our daily life example of a resonant frequency is a pendulum. If we pull back the pendulum and leave, it will swing out and return at its resonant frequency. Objects combine to form a system, this system can have more than one resonance frequency. The resonant frequency is termed as the resonance frequency. The phenomena of resonant frequency used in the series circuit when the inductive reactance (XL) is equal to the capacitive reactance (XC). If the value of supply frequency is changed, we can observe that the value inductive reactance (XL) and capacitive reactance (XC) is also changed. Inductive reactance (XL) and capacitive reactance (XC) are inversely proportional to each other. When we increase the frequency, the value of XL increases, whereas the value of XC decreases. When we decrease the frequency, the value of XL decreases whereas the value of XC increases. At series resonance, when XL = XC. The mathematical equation of resonant frequency is: XL = 2πfL; XC = 1/2πfC XL = XC 2π f0L = 1/ 2πf0C ; f0=1/2π sqrt{LC} Where f0 is the resonant frequency, L is the inductance, C is the capacitance How to Calculate the Resonant Frequency of an Object? An object exposed to its resonant frequency can vibrate in symphony with the sound. The wavefronts pushing on the object will arrive at just the right time to push the object with greater and greater amplitude in each cycle. To get a clear idea of this concept one of the best examples is pushing a friend on a swing. If you push the swing randomly, the swing will not move very well but if you push the swing at a specific time, the swing will get higher and higher. Another example to find the resonant frequencies is to place the object next to a speaker and place a microphone attached to an oscilloscope next to the object. Then play the sound in the speaker at a given volume, and then without changing the volume slowly change the frequency. Now observe the oscilloscope, you will observe that at certain frequencies the amplitude of the wave, is proportional to the volume of the sound that the microphone is able to pick up. The frequency that is caught by the microphone will be greater than at surrounding frequencies. These are the resonant frequencies and are detectable as the sound energy absorbed by the object is re-emitted more efficiently at these frequencies. The precise moment that constructive interference happens the amplitude of the wave will spike at the precise frequency emitted. Q: Compute the resonant frequency of a circuit whose inductance is 25mH and capacitance is 5mu F? A: Known values are, L = 25mH = 25 x 10-3 H C = 5mu F = 5 x 10-6 F Formula for resonant frequency is, f0= 1/2π sqrt{LC}1/2π√L f0=1/2 ͯ 3.14√ (25 ͯ 10-3 ͯ 5 ͯ 10-6) = 450.384Hz Why Neodymium? Ferromagnetism is an exciting phenomenon observed in certain materials, known as ferromagnetic materials, that can retain their magnetization even after removing an external magnetic field. Ferromagnetic materials can become ferromagnets and interact strongly with other magnets and magnetic fields. A characteristic of ferromagnetic materials is their magnetization ability, distinguishing them from paramagnetic and diamagnetic materials, where weak magnetism exists temporarily. This unique property allows for making permanent magnets widely used in various applications such as motors, generators, speakers, and data storage devices. The ability to generate and maintain a magnetic field without the need for a constant external source of power makes ferromagnets highly valuable. An alloy of neodymium, iron, and boron discovered in the 1980s is ferromagnetic, yielding permanent magnets over 1000 times stronger than anything ever seen before. The name neodymium comes from the Greek neos didumous, which means "new twin." Neodymium magnets are made of an alloy of neodymium, boron, and iron. This allows them to simultaneously store impressive amounts of magnetic energy while being highly resistant to demagnetization. Because iron oxidizes quickly, neodymium magnets are coated to prevent rust from accumulating. The attraction between two neodymium magnets is so strong that if placed close enough together, they can collide and shatter. Neodymium magnets have an unusually high-temperature resistance, and they can even withstand heat exceeding 200 degrees Celsius. N50UH 1-1/2"OD x 1.065"ID x 3/8"

Hi guys, What's up? Welcome back to Queen Peaky's Flower Gardens Anyone have any leftover Christmas decorations? We forgot to decorate these trees 😄☣️ Happy Christmas everyone

Everything seems to turn around this week. My grow didn't go well and also a lot going on in our lives. That's why it took a while for the diary to get back on track. Sometimes all we need is some good news and this came two-fold this week. First I woke up to see my favorite coin go through the roof (go Shiba) and later to be surprised by the doorbell, with a bigger surprise: my prize came in!! A great care package by the guys of @Fastbuds, thanks so much, and totally enjoying it! It really made my month. So to find my girls thriving this morning is the third gift in a week that keeps on giving. My soil recipe combined with this great light, the SP-3000 by Mars Hydro (thanks so much @MarsHydroLED) are the reasons all is getting better even with this runt girl, the sole survivor of a pack of 5 Expert Seeds Gorilla's, bought at Zamnezia. See my soil recipe on the germination page if you want to see how I do it or create it yourself. It is unreal how much it aids recovery in severely stressed plants. If you live in Europe, I have accidentally stumbled upon and elaborated on a European Master Mark and Subcool Super Soil recipe. The problem is that Ocean Forest soil is very hard to get by in Europe. Also, some of the amendments and tea mixtures are sold only in the US. After searching online, asking the guys that make Atami and other organic medium specialists I have made a recipe that comes close and definitely matches the super soil recipes we all have seen. So please use it to your advantage. Ask me anything if you have a hard time finding stuff you need and don't worry it works excellently without the permaculture tea as well! So see how she is going back to thriving, in a couple of days after replanting. Instead of stress, they are recovering. Another proof this soil is the European answer to Supersoil. THank you for checking in again! Happy growing and see you soon!!

Hi everyone :-) The hardcore LST was really worth it 2 weeks ago 😍👍. Now all shoots are exactly in the middle and far below, so that they will work again for the next 30 days in the stay growth 😃. I am very excited to see what bushes will emerge 😊. I wish you all a nice weekend, stay healthy 🙏🏻 and let it grow 😎👍 Typ: Sour Diesel (Zamnesia) ☝️ Genetik: Diesel x Northern Lights 👍 Vega Lampe: 2 x Todogrow Led Quantum Board 100 W 💡 Flower lampe: 2 x Todogrow Led Cxb 3590 COB 3500 K 220 W 💡 ☝️ Erde: Canna Terra Professional + ☝️ Dünger: Canna Termittel Vegra Vega, Canna Terra Flores, Rizotonic, Cannazym, CANNA Boost, Pk 13/14, Canna Cal/Mag, Canna Ph - Grow, Canna Ph - Flores ☝️ 🌱 Water: Osmosis water mixed with normal water (24 hours stale that the chlorine evaporates) to 0.2 EG. Add Cal / Mag to 0.4 Ec Ph with Organic Ph - to 6.0 💦 💧

Finished really fast! Not expecting a very big harvest, they needed a longer veg time, pretty small at start of flowering, didn't use massive bloom this run either Going of the last run expecting good quality. Small buds.

WOW these are surprisingly doing very well. Some are a little slower than others but not far behind.

T-9 🔥🍇🚀

I STARTED ON THE DIARY WAY TO EARLY. I HAD TO POP ADDITIONAL SEEDS DUE TO AN ENTIRE PACK NOT GERMINATING. AFTER THAT I EITHER BURNT OR INJURED A COUPLE SEEDS REMOVING A FEW HELMET HEADS. IM FEELING BETTER ABOUT THIS SEASON NOW THOUGH THAT THINGS ARE FINALLY IN THE RIGHT CONDITIONS. IM CONSIDERING POPPING A COUPLE MORE 10TH PLANET JUST IN CASE. WE'LL SEE. 4/20 Happy 420 and Easter to everybody! Checked the girls this morning and at noontime. It was a good idea to switch lights. I'm seeing positive growth under both the duel 1500 lumen cfl's and the 1000 watt l.e.d. with an actual draw of 105 watts. The single 150 hps couldn't go low enough without raising the temp. I may add it layer after transplant in edition to the l.e.d. the plant I had to put a straw on has perked itself up and now has 3 fingered leaves. I'll have to bury up the stem a little on a few after they fill these solo cups. I WATERED everything that was under 20 grams dry weight which was most everything. I'm seeing a dramatic difference thus far. I'm wondering if I should start a couple more 10th planet in case one doesn't make it. The kush seedlings have finally showed a little more advanced growth then the seeds popped later which makes me feel good. It will be interesting to see how these turn out. They are going to be extremely resilient high yielding potent plants that will make it to harvest early. Words have power. 4/21 The lighting switch is working out good. When the plants fill out the solos I'll put the hps back up and use both until they go to their final spits outdoors. I watered everything under the led light which is all pink/special kush. I watered a couple in the aerogarden if the were under 20 grams of dry soil weight. I may have to up the amount of water but I'll be keeping an wye out. Still wanting to pop a couple more 10th planet. I've seen the first 3 fingered leaf. Can't wait for this season. WENT BACK OVER AT 6PM AND EVERYTHING IS LOOKING GOOD. I HAVE THAT ONE PINK KUSH THAT STRETCHED AND I HAD TO PUT A STRAW ON IT IS PICK8NG UP WELL. IM JUST GOING TO HAVE TO BURU IT DEEPER WHEN I GO TO GALLON POTS. IT WAS NICE TODAY AND I GOT A LOT IF SELF CARE DOWN AND HAD SOME OTHER TROUBLES BUT SEEING MY GIRLS GROW UP MAKES ME HAPPY. IM GOING TO USE THE PAR METER AGAIN TOMORROW AND BEGIN CLEANING AND SANITIZING MY GROW AREA. I HAVE A LOT TO DO. 4/22 WATERED EVERYTHING AS IT WAS WITHIN 20 GRAMS DRY WEIGHT. Plants are improving. I'm FINALLY reaching REAL veg with a couple seedlings that have grown their first 3 finger leaves. I'm looking forward to the transplant to 1 gallon. They seem to explode after that. That and the few that stretched can be buried. Now it's time to hurry up and wait. The thing is, now that some have stretched they are growing leaves which makes it top heavy on a ciuplecdue to the elongated stem. Still looks good though. I also rotated the plants to minimize hot spots. 4/23 Things are doing well. I watered everything but two in the back of the aergarden that were still over 20-grams over dry weight and i added soil to the 10th planet cups. Not because they were stretching but just so I can weigh it with the others so I can water properly. I'll check on them later. The oldest seedlings have their first three fingered leaves. I've been shopping around for soil. I think I'll round up all my 1 gal pots and wash them as these will need a transplant in a while. I should check the ppfd again. I also need to ready my outdoor area and sanitize it. Plenty of stuff to do. May still end up popping a couple more 10th planet. Not sure. EDIT: WENT OVER THIS AFTERNOON AND LOCATED ALL MY ONE GALLON POTS (AND A COUPLE OF THOSE SLANTED ONES THAT ARE A LITTLE MORE THAN A GALLON). FPUND THE 3'S TOO BUT IM GOING INTO ONES THEN HOME BABY HOME. AT LEAST THATS THE PLAN. I EMPTIED LAST YEARS GROW BAGS AND BURNED THE LAST OF TEO CANNABIS STALKS. I STILL NEED TO DEEP CLEAN THE CAGE. I JEED TO SPRAY THE PALLETS WITH THAT PESTICIDE THAT KILLS EARWIGS (THE ONES I CANT REPLACE). I ALSO NEED TO GET ALL THE LOOSE SOIL THATS FALKEN OVER THE YEARS AND THE LEAVES OUT OF THE CAGE. LEAF BLOWER AND A RAKE WILL TAKE CARE OF THAT. I HAVE A BRUSH BURNER AND I WAS THINKING ABOUT USING IT BUT THEN REALITY SUNK IN. AT LEAST I GOT SOME WORK DONE. WASHED UP NIDE AND PUT ON HAND SANITIZER TO CHECK ON THE GIRLS. THEY LOOK GREAT TO ME. I QUICKLY SHOT TWO PICS AND BEAT FEET. I SHOULDVE NOT GONE IN AT ALL BUT THAT WAS THE POINT OF ME GOING THERE. TO CHECK IN THE GIRLS. IM SURE THEY'LL BE FINE. 4/24 Had to go back and water. I watered the two in the ag that weren't watered before. Most of the cups under the l.e.d were right on the cusp (220, 218 ect.) I watered a couple and left the others that weighed a tad more and misted the top with a spray bottle so it won't totally dry out. I'll check later but they are growing at a rapid pace now. I'll probably end up watering. I'll probably have to up the volume. I think I'm going to go get a bag of ffof to put in the house and warm up. That way I cam transplant whenever I want. I'll check around for prices. EDIT: Went to the local grow store and bought 3cf of Fox Farm Ocean Forest which will be mixed with the 2cu bag of Happy Frog I already have when I transplant into the 1 gallons pots. I got prices for all the soil so now I just need to figure out how many bags of each I need. I want to get it early so it's still there. I'll be doing my math. Went back over and and as predicted the three cups under the led were "almost" within ten grams of dry weight. They probably could've waited (212, 211, 208) but they are close to breaking the ten grams over dry limit that seems to be doing good for me. I showed my commercial buddy cause he hasn't seem them a while and I could tell he was impressed. I'll take pictures tomorrow. I cleaned the cage a little bit more. My buddy thinks going into 1 gals is the better option than going into 3's. If I have to then it would just be the bigger plants and I have a few gallon and a half ones I'll use for the bigger plants. Still debating whether to pop more seeds and pheno hunt or just go with what I've got. What I've got is looking good. I just don't want to lose any. Might be smart to start a couple extra. 4/25 WATERED EVERYTHING I think. I might think about increasing water volume of water I give at a time. I'll probably stick with whats working since I use the scale anyway. The kush under the l.e.d dries out faster than the cfl. They both are working good and I'm getting some good node development. The earlier plants are actually looking like a pot plant. I may start next week with a weak nutrient solution like ancient amber or the first fox farm one. Worked on some more of the cage. I'm ready to go! 4/26 WATERED EVERYTHING BUT THE BACK ROW OF THE AEROGARDEN WHICH WERE STILL IN RANGE. Plants are getting big. Transplant with the kush might be next week. 10th planet is doing incredible for being so young. Mk Ultra doing good as well. I thought about popping a few more and then pheno hunting but I'll probably stick with what I've got. I'm loving what I'm seeing.

Starting flower nov 1st coming along good

It's slow too slow 😅